This Solicitation opportunity from Texas was posted on September 19, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Ultra-High Resolution Optical Microscope System #490-26-260-00-S-RF-RFP

Closed

490-26-260-00-S-RF-RFPState & Local

Submission Closed10/14/2025, 12:00:00 AM CDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

Federal

IRA AutoLab 2000 Servo-hydraulic, large bore triaxial system per attached specifications.The Department of Energy, specifically the Office of Fossil Energy, has issued a forecast for the procurement of an IRA AutoLab 2000 Servo-hydraulic, large bore triaxial system. This acquisition is categorized under NAICS code 334516 and is designated as a small business set-aside. The equipment will be utilized at a performance location in Pennsylvania. The forecast was posted on November 8, 2026, and identifies New England Research, Inc. as the incumbent contractor. Brian Halstead serves as the Small Business Program Manager and primary point of contact for this requirement.

Office of Fossil Energy

POSTED

DEADLINE

IRA ImaCore 3017 3D Imaging Rock Core Imaging MRI SystemThe Office of Fossil Energy within the Department of Energy is forecasting the procurement of an IRA ImaCore 3017 3D Imaging Rock Core Imaging MRI System. This project, categorized under NAICS code 334516, is intended for performance in Pennsylvania. The acquisition is currently listed as a forecast with a posted date of November 8, 2026. The contract is associated with MR Solutions Inc as the incumbent contractor. Brian Halstead serves as the Small Business Program Manager and primary point of contact for this requirement. The procurement is designated under other for its set-aside type.

Office of Fossil Energy

POSTED

DEADLINE

Crude Oil Phase Behavior (PVT) System per attached specifications IRA Funding Period of Performance: Delivery 22 weeks after award Oil & Gas Center of ExcellenceThe Department of Energy's Office of Fossil Energy is seeking a Crude Oil Phase Behavior (PVT) System for the Oil and Gas Center of Excellence located in Pennsylvania. This project is supported by IRA funding and falls under NAICS code 334516. The procurement is listed as a forecast and is designated as a small business set-aside. The required system must be delivered within 22 weeks following the award of the contract. DCI Corporation is identified as the incumbent contractor for this requirement. Interested parties may coordinate with Small Business Program Manager Brian Halstead regarding this acquisition.

Office of Fossil Energy

POSTED

DEADLINE

LECO TGA801-SMC Macro Thermogravimetric Analyzer with componentsThe Department of Energy, specifically the Office of Fossil Energy, has issued a forecast for the procurement of a LECO TGA801-SMC Macro Thermogravimetric Analyzer and its associated components. This acquisition is categorized under NAICS code 334516 and is intended for performance in Michigan. The current incumbent contractor for this equipment is LECO Corporation. Interested parties may coordinate with Brian Halstead, the Small Business Program Manager, regarding this requirement.

Office of Fossil Energy

POSTED

DEADLINE

IRA - Apreo ChemiSEM S LoVac High-Performance Field Emission Scanning Electron Microscope (SEM) instrument (QTY: 2)The Department of Energy, specifically the Office of Fossil Energy, has issued a forecast for the procurement of two Apreo ChemiSEM S LoVac High-Performance Field Emission Scanning Electron Microscope instruments. This acquisition is categorized under NAICS code 334516 and is intended for performance in Oregon. The current incumbent contractor for this equipment is FEI Company. Interested parties may coordinate with Small Business Program Manager Brian Halstead regarding this opportunity, which was posted on November 8, 2026.

Office of Fossil Energy

POSTED

DEADLINE

LECO AC600 Semi-Automatic Calorimeter with software and componentsThe Department of Energy's Office of Fossil Energy is forecasting the acquisition of a LECO AC600 Semi-Automatic Calorimeter, which includes all necessary software and components. This procurement falls under NAICS code 334516 and is intended for performance in Michigan. The current incumbent contractor for this equipment is LECO Corporation. Interested parties may coordinate with Small Business Program Manager Brian Halstead regarding this upcoming requirement.

Office of Fossil Energy

POSTED

DEADLINE

Perkin Elmer High-Performance Inductively Coupled Plasma Mass Spectrometer (ICP-MS) System per the attached Specifications.The Department of Energy, specifically the Office of Fossil Energy, is forecasting the procurement of a Perkin Elmer High-Performance Inductively Coupled Plasma Mass Spectrometer (ICP-MS) System. This acquisition is categorized under NAICS code 334516 and is intended for performance in Pennsylvania. The current incumbent contractor for this system is PerkinElmer U.S. LLC. Interested parties may coordinate with Small Business Program Manager Brian Halstead regarding this requirement, which was posted as part of the agency's acquisition forecast.

Office of Fossil Energy

POSTED

DEADLINE

2027-SS-0004 - New GC-MS GC-FID - new BPA SolicitationThe Drug Enforcement Administration, under the Department of Justice, is forecasting a new Blanket Purchase Agreement solicitation for the procurement of Gas Chromatography, GC-Mass Spectrometry, and GC-Flame Ionization Detector equipment. This acquisition is intended to replace outdated and non-functional equipment essential for conducting evidence analyses across various field laboratories nationwide. The procurement falls under NAICS code 334516. Agilent Technologies Inc is listed as the incumbent contractor for these services. Interested parties may coordinate with the DEA Vendor Engagement team or the DEA Small Business Program for further information regarding this opportunity.

Drug Enforcement Administration

POSTED

DEADLINE

Specialized Viscosity Measurement Mortar Mixer

Solicitation # oregon-state-university-1296421

Oregon State University is seeking to acquire a Specialized Viscosity Measurement Mortar Mixer from Hayward Material Test Systems Inc through a sole source contract. This procurement is justified by the unique design and capabilities of the equipment, as well as the contractor's status as the only provider capable of meeting the university's specific research parameters and urgent timeframes. The equipment must be commercially available within four weeks of the order. The required mixer must feature pre-installed standard-compliant mixing procedures for EN, ASTM, and ISO standards, along with customizable programming via a user interface and planetary movement speeds between 50 and 200 rpm. Critical technical specifications include a variably programmable water dosing system with high accuracy, integrated torque-based viscosity measurement, an automatic feeding system, and water temperature monitoring. Interested parties may challenge this sole source determination by contacting Scott Lommers via email before the response deadline of November 13, 2026.

Oregon State University

POSTED

DEADLINE

Liquid Quantity Transmitter OEM/ManufacturerThis subcontract involves the manufacture and supply of two Liquid Quantity Transmitters for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work includes the fabrication, assembly, testing, and calibration of liquid quantity sensing hardware for NSN 6680-01-493-4698, ensuring all units are fully tested, marked, and packaged. Performance must adhere to MIL-STD-1916 or ASQ H1331 standards. Critical requirements for this contract include the use of mercury-free materials and strict adherence to NIST SP 800-171 cybersecurity compliance. The work is categorized under NAICS code 334516 and is to be performed in New Cumberland. Interested parties must respond by November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Electrical Component (NSN 6635016988852)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the provision of one unit of electrical component NSN 6635016988852. The contractor is responsible for manufacturing or sourcing the item in strict accordance with the DLA Master List of Technical and Quality Requirements. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 13, 2026. The contract mandates rigorous adherence to military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance must follow MIL-STD-105/ASQ Z1.4, with a requirement for zero non-conformances. Additionally, the provider must ensure full compliance with the Buy American Act and meet NIST SP 800-171 cybersecurity assessment standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Adaptive Diagnostic Electronic Portable Equipment SupplierThis subcontract opportunity is for the supply of 14 units of Adaptive Diagnostic Electronic Portable equipment to support prime contractors under the DLA Weapons Support Maritime Supply Chain. The selected supplier is responsible for manufacturing or sourcing the diagnostic devices while ensuring strict adherence to the DLA Master List of Technical and Quality Requirements and all regulations prohibiting the use of covered defense telecommunications equipment. All 14 units must be delivered for formal government inspection. The contract is designated as a Women-Owned Small Business set-aside under NAICS code 334516 and is managed by the Department of Defense. Performance for this contract will take place in Texarkana, Texas. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 8 days

AI Contract Overview

Austin Community College District is seeking qualified firms to submit sealed proposals for the procurement of an Ultra-High Resolution Optical Microscope System under solicitation number 490-26-260-00-S-RF-RFP. The project aims to acquire advanced microscopy equipment to support the college's scientific and educational initiatives. Proposals must be electronically submitted to the Procure to Pay Department by October 14, 2025, at 12:00 AM CST, with all relevant documentation available through the ACC procurement website and the Workday Spend portal. An optional virtual solicitation conference is scheduled for October 1, 2025, at 1:30 PM CST via Zoom, providing an opportunity for interested parties to clarify details and ask questions. The contract size is estimated to be between 500,000 and 1,000,000 dollars, and the project falls under NAICS code 334516, which pertains to optical and photographic equipment manufacturing. The primary contact for inquiries is Ryan Fetter, whose contact details include an email and phone number, ensuring direct communication for any clarifications or submissions.

General Info

Agency

Texas → Austin Community College

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

TX, USA

Set-Aside

NONE

Documents

rfp

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedSep 19

Solicitation

Response DeadlineOct 14

Deadline has passed

Submission Closed

10/14/2025, 12:00:00 AM CDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas → Austin Community College

Contacts1 person available

OfficeN/A

Organization / AgencyTexas → Austin Community College

Office AddressN/A

Contacts

Ryan Fetter

contact@example.gov

+1 (555) 000-0000

Full Description

AUSTIN COMMUNITY COLLEGE (ACC) DISTRICT is requesting sealed proposals, from interestedor qualified firms for the purposes of selecting a respondent to provide an Ultra-High Resolution Optical MicroscopeSystem for the following solicitation. · Request for Proposal (RFP)> No. 490-26-260-00-S-RF-RFP All sealedproposals must be submitted to the Procure to Pay (P2P) Department by nolater than on Tuesday, October 14, 2025at 12:00 AM Central Standard Time (CST). See solicitation for details.Solicitationdocuments are available on the ACC P2P’s websiteat:· https://offices.austincc.edu/procurement/advertised-solicitations/ or at · https://us.workdayspend.com/rfps/public/965723If you are not able to view thissolicitation, please send an email tothe Buyer/Sole Point of Contact for the solicitation as soon as possible.SOLE POINT OF CONTACT:· Ryan Fetter, Buyer· Email: contact@example.gov · Telephone Number: 512-223-1086Onlyelectronically transmitted responses will be accepted by the date and timeindicated above, unless otherwise stated in the solicitation documents.ACC will hostan optional solicitation conferenceon October 1, 2025 at 1:30 p.m., CST viaZoom Virtual Meeting. See solicitation documents for details.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS