Top

Ultrasonic Vapor Degreaser System Supply & Integration

Active

Federal

Response Deadline08/24/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → FA8227 Afsc Ol H PzimView Agency

NAICS

333248 - All Other Industrial Machinery ManufacturingView NAICS

Place of Performance

Hill Air Force Base, UT, 84056, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 11:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → FA8227 Afsc Ol H Pzim

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8227 Afsc Ol H Pzim

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of a fully integrated turnkey ultrasonic vapor degreasing system including cleaning chamber, solvent recycling, crane, and control systems.

Similar Contracts

Same NAICS industry code

NAICS: 333248

New

Federal

Rapidia Conflux 1The contract action pertains to the sole-source procurement of a Rapidia Conflux 1 printer, along with its accessories, training, and support services, intended for the 580th Software Engineering Squadron at Robins Air Force Base in Georgia. The acquisition is being conducted under RFO 6.103-1 due to the determination that only Rapidia, the original equipment manufacturer with Cage code L0N00, can satisfy the government’s unique requirements. The solicitation has been amended to incorporate the R-DFARS clause 252.225-7013 regarding Duty-Free Entry and to extend the response deadline from July 22, 2026, to July 28, 2026, at 10 a.m. EST, with the final response deadline now set for 2:00 p.m. UTC. Additionally, the contract term extension clause at 52.217-9(a) has been updated to allow the Government to extend the contract term by written notice delivered within one day. The award will be a Firm-Fixed Price contract, and all other terms and conditions of the original solicitation remain unchanged. The contracting office is located at Robins AFB, Georgia, with Adriana Lytle listed as the primary point of contact. No set-aside provisions apply, and the NAICS code 333248 identifies the procurement within the Other Commercial and Industrial Machinery Manufacturing category. No detailed pricing, delivery schedules, performance periods, inspection criteria, or specific packaging requirements are provided in the available documentation, and no attachments or additional evaluations are referenced.

FA8579 Software Sprt Afsc Pzim

POSTED

DEADLINE

2-Head Embroidery MachineA commercial-grade 2-Head Embroidery Machine is being procured to support the NTC Sewing Shop in producing military nameplates, unit patches, and other required insignia for service members’ ODU uniforms. The machine must feature two sewing heads, each with 15 needles, and be built on a heavy-duty steel frame weighing approximately 1168 lbs to ensure durability under continuous use. It must achieve a maximum sewing speed of 1,100 stitches per minute for flat fabrics and 1,000 stitches per minute for caps, utilizing a positive needle drive system suitable for thick, layered materials. The embroidery area must be at least 450mm x 520mm, and the system must include a minimum 10.4-inch LCD touch screen with LAN and USB connectivity for seamless file transfer and operation. Essential capabilities include a quick-change cap system, integrated laser pointer for precise tracing, automatic hoop centering, and a dedicated function for creating military nametapes to meet specific service standards. The solicitation is a total small business set-aside under NAICS code 333248, managed by the Department of Defense at Fort Irwin, California, with responses due by July 30, 2026. Offerors are directed to review Attachment 1 for full physical, functional, and performance salient characteristics, as well as warranty and delivery terms, and must submit quotes through the designated portal.

POSTED

DEADLINE

DNM 6700 4TH GENERATIONThe U.S. Department of Defense, through DLA Maritime - Puget Sound, is soliciting a sole-source, firm fixed-price supply contract for one DNM 6700 4th Generation 3-Axis Vertical Machining Center from Ellison Technologies under commercial item procedures outlined in FAR Parts 12 and 13.5. The item, classified under NAICS code 333248 and Product Service Code 3417, will be delivered FOB Destination to Puget Sound Naval Shipyard in Bremerton, Washington, with final acceptance performed by the Government at Building 514 D1. The contract requires full compliance with commercial packing standards ASTM-D-3951, military marking standards MIL-STD-129 and MIL-STD-130, including mandatory two-dimensional Data Matrix barcodes encoding Unique Item Identifiers in accordance with ISO/IEC 16022, ISO/IEC 15434, and ANSI MH10.8.2. Wood packaging must be heat-treated to 56°C for 30 minutes and certified by an ALSC-recognized agency, while prohibited materials include asbestos, excelsior, loose fill polystyrene, and hygroscopic substances. The equipment must be OSHA-certified by a nationally recognized testing laboratory, accompanied by three hard copies and one searchable electronic copy of comprehensive operating and maintenance manuals, and include on-site training by a U.S. citizen representative. All offerors must be registered in SAM.gov, provide a valid CAGE code, complete all representations and certifications, and indicate whether the item qualifies as Commercial Off-The-Shelf, which exempts it from NIST SP 800-171 cybersecurity requirements. The solicitation mandates adherence to clauses covering child labor, whistleblower rights, prohibited contractors, supply chain security, and anti-discrimination policies, with a requirement that offers include delivery lead times and pricing for each CLIN. Offers must be submitted via email to Naomi Larson at naomi.larson@dla.mil by 27 July 2026, with delivery scheduled for 30 September 2026. Invoicing must be processed through WAWF, and the payment office is located at the same DLA Maritime facility in Bremerton. The award will be based on a trade-off analysis of technical merit, price, and performance, without specifying the relative weight of non-price factors. No contract

DLA Maritime - Puget Sound

POSTED

DEADLINE

Solicitation - Brand Name or Equal to DMP Flex 200 Direct Metal 3D Printer System

244-NETWORK Contract Office 4 (36C244)

POSTED

DEADLINE

Industrial Sewing Machine SupplyThe contract requires the supply of three industrial sewing machines that meet military specifications outlined under NSN 3530-00-892-4652, with all units manufactured in full compliance with applicable military standards. Delivery is mandated to be FOB Origin, meaning the seller assumes responsibility until the machines are loaded onto the carrier at the manufacturing or shipping point, and the entire fulfillment must be completed within 167 days from the contract award. This is a subcontract positioned as a Total Small Business Set-Aside under the SBA program, ensuring exclusive eligibility for small businesses as defined by the Federal Acquisition Regulation. The NAICS code 333248 identifies the industry as Sewing Machine Manufacturing, and the performing location is specified as Texarkana, Texas, with a ZIP code of 75507-5000. The solicitation is managed by the Department of Defense through the agency named Construction & Equipment Containers, with responses due by August 3, 2026, and the opportunity was posted on July 22, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

WATER SAMPLING TESTThe contract pertains to the procurement of a single unit of a Water Sampling Test Kit for Chlorine, identified by NSN 6640-01-681-0587, which includes a photometer, four cuvettes, four cuvette caps, and a well cover. Delivery is required FOB destination within 20 days to APO AE 09898, with the final delivery point specified as Al Udeid Air Base in Qatar under the shipping address FB5897 USAF PREPOSITIONING P. The item is categorized under NAICS code 333248 and procured through a solicitation issued by the Department of Defense’s Medical Supply Chain FSH. The contract mandates strict compliance with DLA’s Master List of Technical and Quality Requirements, including specific packaging, marking, and labeling standards such as MIL-STD-129, MMS No. 1, ASTM D3951, and FED-STD-313, with hazardous material provisions governed by 29 CFR 1910.1200 and DFARS 252.223-7001. All items must be sealed in unit containers and enclosed in commercial shipping containers compliant with RP001 for palletization, and labeling must include the government shipping address, RDD number, and other contract-specific identifiers. Quality inspection and acceptance are the Government’s responsibility at the destination under FAR 52.246-2. Invoicing must be conducted exclusively through Wide Area WorkFlow (WAWF), and the contractor is required to provide a Unique Entity Identifier and CAGE code. The solicitation includes numerous FAR and DFARS clauses covering employment eligibility, trafficking in persons, sustainable products, cybersecurity safeguarding, small business subcontractor payments, and whistleblower protections, with clause 52.227-1 Alternate I authorizing a waiver notice for specific terms. Historical pricing indicates an estimated contract value of $1,200.68 based on prior award data, though no unit price is specified in the current CLIN. Proposals must be submitted electronically via DIBBS by July 29, 2026, with technical inquiries directed through the designated cFolders portal and procurement handled by Tina Vu at Tina.Vu@dla.mil. No evaluation factors, weights, or award methodology are explicitly stated, and no contract type is specified, leaving the award basis ambiguous

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

SEWING MACHINE, INDUThe contract seeks three industrial sewing machines under NSN 3530-00-892-4652, with a delivery deadline of 167 days after award, and is issued as a full and open competitive solicitation in accordance with federal and military specifications. The procurement is designated as a Total Small Business Set-Aside, ensuring eligibility is restricted to small businesses as defined by the SBA, with the NAICS code 333248 applying to the category of industrial machinery manufacturing. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements unless an amendment supersedes it. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed prior to return. The solicitation number is SPE8ED-26-T-1160, published on July 22, 2026, with responses due by August 3, 2026. The point of contact is Takawira Ndiripo, reachable via email and phone, and performance is required at a location in Texarkana, Texas, with the contract administered under the Department of Defense through the Construction & Equipment Containers organization.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Ultrasonic Vapor DegreaserThe U.S. Government, through the 309th Electronics Maintenance Group at Hill Air Force Base, Utah, is conducting market research to identify capable vendors for a turnkey ultrasonic vapor degreaser system with integrated automated parts handling and solvent recycling/distillation. This sources sought notice, identified by solicitation number FA8227-26-SS-VAPORDEGREASER and posted on July 22, 2026, does not constitute a solicitation or commitment to award a contract; no quotes, bids, or proposals are being requested at this time, and the government will not reimburse any costs incurred in response. Respondents are required to provide detailed information including company name, CAGE/UEI, point of contact, business size under NAICS code 333248 (750-employee size standard), and socioeconomic status such as small business, 8(a), HUBZone, WOSB, or SDVOSB. Additionally, respondents must clarify whether they are the manufacturer, authorized dealer, or reseller of a comparable system, provide capability statements demonstrating recent installations—particularly at government or DoD sites—and confirm their ability to meet all technical requirements including solvent compatibility with Kyzen SLV901, closed-loop recycling, backup power functionality, OSHA-compliant safety features, and delivery and installation within 30 days of delivery. The system must be installed at Building 843 at Hill AFB, requiring coordination for utility hookups, facility infrastructure, and strict compliance with base access rules that mandate U.S. citizenship for all personnel and advance submission of identification and vehicle information. Respondents must also detail their GSA or federal contract vehicle holdings, typical lead times, facility prerequisites such as power and ventilation, and any recommended NAICS code changes. While no formal evaluation factors, contract clause references, pricing data, or award basis are defined at this stage, the technical depth of the Draft SOW suggests that any future solicitation will prioritize technical compliance and past performance through a trade-off process, not LPTA. All responses must be submitted electronically via SAM.gov by August 24, 2026, and failure to respond will not exclude entities from future opportunities. The government will set aside the requirement for small businesses only if at least two qualified small businesses respond with sufficient information, and any future solicitation will be posted on SAM.gov.

FA8227 Afsc Ol H Pzim

POSTED

DEADLINE

Manufacture of FILTERGRAM Diagnostic DevicesThe contract calls for the full-scale production of 45,000 FILTERGRAM diagnostic devices under NSN 6640-01-677-9591, encompassing all phases from component sourcing and assembly to final calibration, quality control, and packaging. All work must adhere strictly to Department of Defense technical specifications and MIL-STD-129 labeling requirements to ensure uniformity and compliance across the medical supply chain. The production is required to be completed at the designated place of performance in New Cumberland, PA, with zip code 17070-5002, and must meet the stringent quality and documentation standards expected for military medical equipment. This is a small business set-aside contract under the SBA program, classified under NAICS code 333248, and is structured as a subcontract solicitation open for response until July 28, 2026. The solicitation was posted on July 21, 2026, and is managed by the Medical Supply Chain FSH under the Department of Defense. The production effort is critical to maintaining operational readiness and requires a qualified small business capable of scaling manufacturing to meet the large-volume demand while maintaining consistent product integrity throughout the entire lifecycle from raw materials to delivered units.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

COVER GLASS, MICROSCOPEThe cover glass for microscope slides is made from high-quality, clear, non-fogging, non-corrosive borosilicate glass with parallel surfaces and uniform homogeneity to ensure consistent wetting and optical clarity. It is colorless, exhibits low auto-fluorescence, and is thoroughly cleaned and washed for immediate use across all levels of microscopy. Each cover glass measures 22mm by 22mm with a thickness of #1, ranging from 0.13mm to 0.17mm. The product is sold by weight in 1-ounce containers, with ten containers per package, and the unit of issue is each. The NSN is 6640-01-718-7221, and the contract is issued under solicitation SPE2DH-26-T-5374 with a response deadline of July 28, 2026. The requirement is for two units, with delivery expected within five days of award, and the place of performance is APO, 96328-5225. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and packaging, handling, and government identification removal must comply with applicable DLA standards. The contracting office is part of the Department of Defense’s Medical Supply Chain, with Tina Vu as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

WINCH, DRUM, POWER OPThe contract is for the procurement of one unit of a winch, drum, power operated, identified by NSN 3950-01-568-9781 and part number 12B-9.6-S8C-RH-27-LP-GALV, manufactured by BLOOM MANUFACTURING, LLC. Delivery is required within 20 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and packaging must be labeled per MIL-STD-129. Palletization must comply with DLA Packaging Requirements, and the item must not be shipped via parcel post; traceable freight methods are mandatory. The delivery address is Puget Sound Naval Shipyard IMF, Building 514, in Bremerton, WA, with a required delivery date of July 16, 2026. The contract number is SPE8EE-26-T-2127, and the purchase request number is 7017554742, with a unit price of one dollar and no variance allowed in quantity. Government-specific identifiers and codes are included for tracking and administrative purposes, and technical and quality standards referenced are controlled by the DLA Master List as of the solicitation issue date.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

SCOOP, LABORATORYThe contract is for the procurement of sterile, disposable, individually sealed laboratory scoops manufactured from polystyrene plastic, intended for retrieving samples from larger sources. The product is white in color and packaged in boxes of ten units per box, with a total order quantity of three boxes. The item is identified by NSN 6640-01-722-5866 and is subject to DLA technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the time of solicitation or award. Packaging must meet DLA standards, and non-accepted supplies must have all government identification removed as per RQ011. Delivery is required within five days of award, to JBER, Alaska, with a zip code of 99506-3702. The solicitation, numbered SPE2DH-26-T-5373, was posted on July 21, 2026, with responses due by July 28, 2026. The procurement is managed by the Department of Defense under the Medical Supply Chain FSH office, and inquiries should be directed to Tina Vu at the provided contact information.

MEDICAL SUPPLY CHAIIN FSH

POSTED

3 days ago

DEADLINE

in 4 days

View Details

More opportunities from Department Of Defense → FA8227 Afsc Ol H Pzim

Same awarding agency

NAICS: 333318

New

Federal

Solvent Recycling Distillation Unit Manufacturing

Other Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

OEM Training & System Verification Support

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Backup Power System Integration

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Solvent Supply & Compatibility Management

Other Chemical and Allied Products Merchant Wholesalers

POSTED

DEADLINE

On-Site Installation & Utility Hookup Services

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

15340 - Mezzanine & Modular OfficeThe solicitation FA8227-26-A-1002 seeks a Total Small Business Set-Aside for the design and construction of a 1,200 square foot enclosed mezzanine in the South Center section of Building 238 at Hill Air Force Base, Utah. The project involves creating a fully functional space featuring an office, break room, and multi-purpose area serving as both a computer lab and general meeting space, with strict requirements to minimize support columns to a maximum of nine and avoid new footings unless unavoidable. The scope includes fabrication and erection of a steel structure with decking and stairs, wall and ceiling framing, installation of flooring and cabinetry, and integration of structural, electrical, lighting, data, and fire alarm/suppression systems. All work must comply with Unified Facility Criteria, Hill Air Force Base Design Standards, and applicable local and national building, electrical, plumbing, mechanical, and fire safety codes. Steel components must be painted light grey using industrial-grade primer and paint, and the structure must maintain a minimum 11-foot clear height from the ground floor. Lighting must be LED with dimmer switches, and all systems must be code-compliant. The solicitation is classified under NAICS code 236210 and is exclusively reserved for small businesses. Key contacts for all correspondence are SSgt Ruano Gutierrez and Hideo Mera, and all emails must include the notice ID and project name in the subject line. The response deadline has been extended multiple times, with the final submission due on August 3, 2026, following a site visit scheduled for July 14, 2026, and a question submission window closing on July 17, 2026. No pricing details, contract value, delivery schedule, or formal inspection and acceptance procedures were provided in the documentation.

Industrial Building Construction

POSTED

DEADLINE

Advanced Training for Air Force PersonnelThis contract involves providing specialized, hands-on training to Air Force personnel focused on the operation, maintenance, and troubleshooting of the CT X5000 system. The training aims to equip military staff with advanced skills to effectively manage this specific technology, ensuring operational readiness and technical competence within the Air Force. The contract is classified as a subcontract under the NAICS code 611430, which pertains to professional and management development training services. Issued by the Department of Defense under the office code FA8227 Afsc Ol H Pzim, this contract supports the Air Force's ongoing educational and technical development initiatives. Specific details such as the solicitation number, type of set-aside, location of performance, and point of contact were not provided. The official information and updates regarding this contract can be accessed through the government’s SAM website.

Professional and Management Development Training

POSTED

DEADLINE

On-Call Technical Support & Emergency RepairsThis contract entails providing continuous, around-the-clock technical support for the CT X5000 system, addressing system failures through both remote diagnostics and on-site repair services. The scope ensures rapid response to any issues that arise, minimizing downtime and maintaining operational functionality. It is a subcontract arrangement under the Department of Defense, specifically managed by the FA8227 Afsc Ol H Pzim office. The contract falls under the NAICS code 811212, which relates to computer and office machine repair and maintenance. Although specific location details and points of contact are not provided, the emphasis is on emergency repair services and technical assistance to support the system's reliability. The posting date is February 2, 2026, highlighting a forthcoming operational timeline. This ensures that the CT X5000 system will receive dedicated maintenance support in critical situations, reinforcing its availability for mission-essential activities.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Replacement of efx-CT 4G and efx-DR WorkstationsThe contract involves the supply and installation of new efx-CT 4G and efx-DR workstations, including the decommissioning of existing legacy units and the integration of the new systems. This effort focuses on replacing older equipment with updated workstations to enhance operational capabilities and ensure seamless system functionality. The work includes both hardware deployment and the technical integration required to support continued mission requirements. Issued as a subcontract by the Department of Defense under NAICS code 334111, the contract was posted on February 2, 2026. It falls under the oversight of the FA8227 Afsc Ol H Pzim office within the Department of Defense. While specific details regarding the place of performance and point of contact are not disclosed, the contract reflects a critical modernization initiative aimed at upgrading defense systems equipment.

Electronic Computer Manufacturing

POSTED

DEADLINE

CT X5000 Software Updates & Version UpgradeThe contract involves upgrading and configuring the CT X5000 system software from version 1.9 to 2.4. This update includes the implementation of new features as well as necessary security patches to ensure the system's integrity and performance. Following the upgrade, validation is required to confirm that all new functionalities and security enhancements operate correctly. This subcontract, issued by the Department of Defense under the NAICS code 541512, focuses on software development services. Although specific location and contact details are not provided, the contract posting date is February 2, 2026, and it is intended to enhance the operational capabilities of the existing CT X5000 system used by the agency.

Computer Systems Design Services

POSTED

DEADLINE

CT X5000 System Preventive Maintenance & CalibrationThis contract involves on-site preventive maintenance, calibration, alignment, and operational testing of the CT X5000 system to ensure its continued optimal performance. The services aim to sustain the reliability and accuracy of the equipment, minimizing downtime and potential malfunctions through regular and thorough upkeep activities. The scope is focused on maintaining the technical integrity and operational readiness of the CT system. The contract is a subcontract under the Department of Defense, specifically through the FA8227 Afsc Ol H Pzim agency. It falls under the NAICS code 811211, which pertains to equipment maintenance and repair services. The agreement was posted on February 2, 2026. While details such as location or points of contact are not specified, the emphasis lies on preventive service to support the operational functionality of the CT X5000 system.

Consumer Electronics Repair and Maintenance

POSTED

6 months ago

DEADLINE

N/A

View Details