Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Unable to Decompose Subcontract Opportunities

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled "Unable to Decompose Subcontract Opportunities" was posted on August 4, 2026, with a response deadline of August 31, 2026, at 8:00 PM. It is classified as a subcontract opportunity under the Department of Defense, specifically managed by Navsup Weapon Systems Support Mech. However, critical details including the solicitation number, NAICS code, type of set-aside, organization type, and point of contact are unavailable. The system was unable to retrieve or decompose the prime contract information, which prevented the identification of specific subcontracting opportunities, resulting in incomplete data for place of performance, office address, and contact details. The only actionable information is the UI link for further reference on SAM.gov, with all other fields left blank or null due to system timeouts during data retrieval.

General Info

Subcontract opportunity posted August 4, 2026, deadline August 31, 2026, DoD, Navsup, data incomplete.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

928110 - National SecurityView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
The prime contract details could not be retrieved due to system timeouts, preventing decomposition into subcontract opportunities.

Similar Contracts

Same NAICS industry code

NAICS: 928110
New
DIBBS
LIFT, THRUST DEVICE
Solicitation # SPE7M4-26-Q-0924
The contract is for a LIFT, THRUST DEVICE with NSN/Part Number 4910-01-120-8846, quantity of three units, under solicitation SPE7M4-26-Q-0924, issued by the Department of Defense’s Fluid Handling Division. The technical data associated with this item is subject to strict export controls under either ITAR or EAR, meaning any disclosure to foreign persons, regardless of location or citizenship, requires prior government authorization. Access to this controlled data is strictly limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandated training on handling DOD export-controlled technical data, and have been formally approved by the DLA controlling authority. The place of performance is in Bremerton, Washington, with Freddie Vazquez designated as the primary point of contact. The solicitation was posted on August 4, 2026, with responses due by August 11, 2026, and all handling must comply with DFARS 252.225-7048.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 928110
New
International
W8703-270055 Defence Drone Initiative (DDI) Marketplace
Solicitation # WS5802684496
The Defence Investment Agency, acting on behalf of the Department of National Defence, is inviting Canadian suppliers to apply for the Defence Drone Initiative (DDI) Marketplace under solicitation number WS5802684496. This Supply Arrangement aims to create a pre-qualified pool of vendors capable of delivering Uncrewed and Autonomous Systems, counter-UxS solutions, communications and data systems, engineering and integration services, testing and training, and innovation and experimentation activities. The initial bid submission deadline is 14 August 2026 at 14:00 EDT, with all proposals received after this date considered for future rounds. The agreement will facilitate rapid access to cutting-edge technologies through a streamlined procurement framework designed to meet evolving operational needs. The solicitation is open to companies across Canada, with performance expected throughout the country, and is categorized under NAICS code 928110. An industry engagement session is scheduled for 30 July 2026 at 13:00 EDT to provide further guidance. The contracting authority is Sharon McCartney, reachable at sharon.mccartney@dia-aid.gc.ca, and the supply arrangement's official closing date is 31 July 2031, allowing for long-term participation opportunities.
Department of Public Works and Government Services

POSTED

1 day ago

DEADLINE

in almost 5 years
View Details
NAICS: 928110
New
DIBBS
Unable to Decompose Prime ContractThe contract is a subcontract titled "Unable to Decompose Prime Contract" with a posted date of August 3, 2026, and a response deadline of August 14, 2026. It is associated with the NUCLEAR REACTOR PROGRAM under the Department of Defense, and the place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. No solicitation number, NAICS code, set-aside details, organization type, or point of contact information is available, and attempts to retrieve the prime contract details failed due to system timeouts. The contract can be accessed via the DIBBS portal at the provided URL, but key procurement metadata remains incomplete or unavailable.
NUCLEAR REACTOR PROGRAM

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 928110
New
DIBBS
Small Business / WOSB/SDB Supplier Participation OpportunityCertified Women-Owned Small Businesses and Service-Disabled Veteran-Owned Small Businesses are invited to participate as subcontractors or vendors under a subcontracting opportunity facilitated by the Defense Logistics Agency, a component of the Department of Defense. This opportunity enables eligible small businesses to align with a prime contractor’s small business designation to support future teaming arrangements or supply chain engagements, with the goal of enhancing small business involvement in defense-related contracting. The solicitation is not tied to a specific NAICS code, set-aside designation, or geographic location, allowing broad participation across industries and regions as needed. Interested suppliers should monitor the posted link for updates and activation of specific sourcing events, as opportunities will arise on an as-needed basis tied to the prime contractor’s evolving requirements and performance obligations.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 928110
New
DIBBS
Unable to Decompose Subcontract OpportunitiesThe contract titled "Unable to Decompose Subcontract Opportunities" was posted on August 1, 2026, and is categorized as a subcontract under the Defense Logistics Agency, part of the Department of Defense. Despite its designation, no solicitation number, NAICS code, set-aside information, or organizational details are available. The system was unable to retrieve prime contract data or break down associated subcontract opportunities due to timeouts, leaving key procurement elements undefined. The place of performance and office address lack specific location data, and no point of contact is provided. The only identifiable reference is a DIBBS link, which may contain additional context but is inaccessible without further system access or resolution of the retrieval failure.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 928110
New
DIBBS
No subcontract opportunities identified due to data unavailabilityNo subcontract opportunities have been identified due to limited data availability, with the system unable to decompose the prime contract into sub-opportunities because of gateway timeout errors. The solicitation is listed under the agency name LAND SUPPLY CHAIN, part of the Department of Defense, with a posting date of July 30, 2026, and a response deadline of August 7, 2026. All fields including solicitation number, NAICS code, set-aside type, place of performance, and point of contact are unavailable or null, indicating incomplete or inaccessible contract details. The only accessible reference is a link to the DIBBS system where further information may be available, but no specifics on scope, requirements, or eligibility criteria can be determined from the provided data.
LAND SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 928110
New
Federal
CG-RAPTOR - COASTAL SENTINEL INDUSTRY DAY
Solicitation # CG-Raptor_Industry_Day
The United States Coast Guard, through its Office of Rapid Response and Prototyping, is seeking mature, operationally viable technologies to enhance the Coastal Sentinel maritime surveillance and command-and-control system. This request for information is not a solicitation for contracts or a commitment to procure, but rather a market research effort to identify industry capabilities that can be demonstrated at an invitation-only event on September 29, 2026, in San Diego, California. Respondents are encouraged to submit technologies that are already proven in relevant environments, show measurable operational value, and require no significant government-funded development prior to demonstration. The focus is on solutions that integrate seamlessly with existing systems, particularly the Team Awareness Kit ecosystem, and can operate effectively under real-world conditions such as limited bandwidth, disconnected environments, and austere settings. Technology areas of interest include mature integrations with TAK, advanced maritime track correlation and sensor fusion, alternatives to traditional long-range electro-optical/infrared systems like high-altitude balloons and uncrewed systems, and computer vision applications for autonomous vessel detection, classification, and activity recognition. The Coast Guard prioritizes technologies with high readiness levels, demonstrated operational deployment, modular architecture, strong cybersecurity and data governance, and human-centered design that reduces operator burden. Companies must clearly articulate their technology’s readiness, real-world testing, and integration pathways, with preference given to those already field-tested by users. Responses are due by August 14, 2026, and only up to ten firms will be invited to present at the industry day, where demonstrations will be unclassified and limited to unclassified information. Participation does not imply endorsement, qualification, or future procurement.
C5I Division 3 Portsmouth

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 928110
New
Federal
AFLCMC Armament Directorate Rapid Response (ADRR) Commercial Solutions Opening (CSO) for Innovative Execution
Solicitation # FA8682-24-C-S001
The Air Force Life Cycle Management Center’s Armament Directorate Rapid Response Commercial Solutions Opening (CSO) under solicitation number FA8682-24-C-S001 serves as an umbrella authority for rapidly acquiring innovative commercial weapons technologies and services through flexible contracting pathways including FAR Part 12 and Other Transactions. Authorized under 10 U.S.C. 3458 and implemented via DFARS Subpart 212.70, the CSO is not a request for proposals but a framework enabling future targeted solicitations known as Spirals, which are issued as amendments to address specific capability gaps. The CSO remains active through June 4, 2027, following extensions from its initial 12-month term, and is managed by the AFLCMC Armament Directorate at Eglin AFB, Florida, with administrative oversight provided by Sara Riley. It mandates the use of the Weapons Government Reference Architecture (GRA), delivered in Cameo .mdzip SysML format, incorporating standards like WOSA and UAI, and requires vendors to align with digital acquisition protocols through the iHUB and Government Issued Framework. No funding is currently committed, and unsolicited proposals are not accepted; all submissions must respond to officially posted Spirals. Spirals under this CSO vary in scope and access, ranging from open requests for information to tightly controlled Closed Spirals limited to pre-qualified vendors. Amended multiple times since 2024, the CSO has issued Spirals targeting programs including ERAM, LACM, CAMP, and FAMM-BAR, with detailed requirements, submission procedures, and evaluation criteria specified in each. Closed Spirals, such as the FAMM-P BAR Risk Reduction effort, restrict distribution of Controlled Unclassified Information (CUI) via DoD SAFE to only those vendors down-selected through prior RFI and Industry Day events. Invoicing and payment are processed through WAWF using ALIN and ACRN codes referenced in Attachment 3, with payments administered by DFAS and subject to strict compliance with milestone acceptance by the AOR. Vendors must be registered in SAM, possess a UEI, and comply with federal regulations on non-discrimination, conflict of interest, data rights, export controls, and customs procedures. Deliverables must adhere to Department of Defense packaging and marking requirements, including duty-free entry notices for shipments to military installations, and all work is subject to inspection and acceptance by DCMA. The CSO en
Air Force Life Cycle Management Center

POSTED

6 days ago

DEADLINE

in almost 3 years
View Details
NAICS: 928110
New
DIBBS
Unknown Subcontract Opportunity - Insufficient Scope DataNo actionable scope of work, deliverables, or technical specifications are provided in this solicitation, making it impossible to determine specific subcontract opportunities or evaluate potential bid requirements. The absence of a Statement of Work and incomplete pricing data renders the contract unsuitable for informed participation, as key details necessary for proposing a response are missing. The solicitation is posted under the agency name LSO COMBAT VEHICLES AND ARMAMENT within the Department of Defense, with a place of performance identified as Texarkana, Texas, 75507-5000, but no point of contact or organizational details are available to facilitate clarification. The solicitation has a response deadline of August 10, 2026, and while it is categorized as a subcontract type, there is no set-aside designation, NAICS code, or other classification data to guide potential bidders. Interested parties are directed to the provided UI link for any updates, but the current data offers no basis for meaningful preparation or submission.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 928110
New
DIBBS
Unable to decompose subcontract opportunities due to system unavailabilityNo subcontract opportunities can be identified at this time because system unavailability prevents access to the prime contract details necessary for decomposition. The solicitation is linked to the Defense Logistics Agency under the Department of Defense, with a posted date of July 29, 2026, and a reference to contract SPE7M117D0001 and delivery order SPE7LX26F82V1. However, critical information such as the solicitation number, NAICS code, type of set aside, organization type, place of performance, and point of contact is unavailable. The associated UI link provides access to the DIBBS portal where further details may be found, but currently no subcontracting potential can be assessed due to the lack of accessible prime contract data.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

N/A
View Details
NAICS: 928110
DIBBS
Unable to Decompose Subcontract OpportunitiesA subcontract opportunity titled Unable to Decompose Subcontract Opportunities has been posted with a solicitation number of SPE7M32T7729, under the Department of Defense's FLUID HANDLING DIVISION. The opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, indicating exclusive competition for small businesses. The posting date is July 28, 2026, with a response deadline of August 10, 2026, and the place of performance is listed as Hill AFB, Utah, with a zip code of 84056-5734. Due to a configuration error, critical contract details including the Statement of Work, CLINs, agency-specific information, and NAICS code could not be retrieved, preventing the breakdown of potential subcontracts or supplier opportunities. No point of contact information is available, and the official link for the request for quotation is accessible through the DIBBS platform.
FLUID HANDLING DIVISION

POSTED

8 days ago

DEADLINE

in 5 days
View Details
NAICS: 928110
SLED
USM SSP 27_001 Notice of Proposed Sole Source Purchase of Highpoint. http://www.ms.gov/dfa/contract_bid_search/Bid RFx: 3150006957 Comments/objections will be received as required per Section 31-7-13 (C) of the Mississippi Code until 8:00 a.m. (Central
Solicitation # 9280-27-R-RFIN-00001
The University of Southern Mississippi is proposing a sole source purchase under RFx 3150006957 for a contract titled USM SSP 27_001 Notice of Proposed Sole Source Purchase of Highpoint, with the solicitation number 9280-27-R-RFIN-00001. This procurement is being conducted under the State and Local Education (SLED) category and is being managed by the university’s office in Mississippi. The notice was posted on July 26, 2026, and all comments or objections must be submitted by 8:00 a.m. Central Time on August 12, 2026, in accordance with Section 31-7-13(C) of the Mississippi Code. No set-aside type or NAICS code is specified for this solicitation, indicating a direct sole source determination without competitive bidding. The point of contact for inquiries is Amber Floyd, reachable at amber.floyd@usm.edu or 601-266-4855, and performance of the contract will occur within the state of Mississippi. The official notice and details can be reviewed through the provided state contract search link.
UNIVERSITY of SOUTHERN MISSISSIPPI

POSTED

10 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 332919
New
Federal
STEM DISC BONNET AY
Solicitation # N0010426QEC93
The contract pertains to the procurement of a STEM DISC BONNET AY under solicitation N0010426QEC93, with a response deadline of September 3, 2026, and is issued by the Navsup Weapon Systems Support Mech under the Department of Defense. All technical and quality requirements are governed by the Individual Repair Part Ordering Data (IRPOD), which is mandatory for vendor review and forms the core of compliance. The order of precedence for resolving conflicts prioritizes contract amendments, then the schedule, terms and conditions, and finally referenced documents such as drawings, specifications, and STRs, with all cited documents required to be used in their entirety at the specified revisions unless explicit approval is obtained. The contractor must maintain an inspection system compliant with government standards, submit all test and inspection reports electronically via Wide Area Workflow (WAWF), and adhere to strict packaging standards including those specified in MIL-PRF-23199 and MIL-STD-2073, particularly for items requiring cleanliness controls. No mercury or mercury-containing compounds may be introduced into the product or its packaging. Pricing is valid for 60 days after the closing date, and contractual documents are deemed issued upon electronic transmission or mailing. The contractor is required to submit pre-manufacturing procedure packages within 45 days of award and certified reports of test and inspection per DI-QCIC-8872, with separate documentation required for each unique contract number, NSN, and item nomenclature. Distribution of technical data is restricted, with certain documents labeled NOFORN and subject to export control approval from the Naval Sea Systems Command. Commercial specifications not available through government sources must be obtained from original publishers. All submissions must comply with DD Form 1423 formatting guidelines, including proper Block entries for data type, approval status, distribution level, and delivery frequency. The contract enforces mandatory use of the Workflow PRO module, prohibits deviations from critical technical or delivery requirements without documented justification and government concurrence, and includes full compliance with small business program representations, veteran and disabled worker equal opportunity clauses, cybersecurity maturity certification, and nuclear material handling restrictions. Delivery is FOB destination, and payment instructions must follow Wide Area Workflow protocols.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332919
New
Federal
MANIFOLD, PRESS RED
Solicitation # N0010426QZA56
This contract pertains to the procurement of a Pressure Reducing Manifold assembly designed for critical shipboard systems where material integrity is paramount due to the potential for serious personnel injury, loss of life, or damage to naval vessels. Classified as Level I Special Emphasis material, it demands strict adherence to detailed design specifications, quality assurance measures, and traceability protocols. The manifold must conform to specific Vacco drawings and documents, incorporate precise materials like SAE and ASTM grade stainless steels, and meet rigorous oxygen cleaning and certification standards. Additionally, the assembly contains non-metallic components subject to stringent toxicity and flammability requirements per NAVSEA guidelines, with special off-gassing tests required from approved laboratories. The contractor is responsible for comprehensive quality management systems compliant with ISO and Navy standards, including material traceability from raw stock to finished products, detailed inspection, and certification of chemical, mechanical, and non-destructive testing data. Welding and brazing processes, when required, must be qualified with documented procedures and approvals, and all fasteners must be appropriately marked for identification. The contract also allows for partial and early deliveries with no additional cost and requires full compliance with national defense priority rating regulations. Documentation must be electronically submitted via the Navy’s Contractor Data Submission system, including production test procedures, certifications, and any requests for departures such as waivers or engineering change proposals. The procurement is managed by the Naval Supply Systems Command Weapon Systems Support at Mechanicsburg, PA, with strict government oversight on inspections and supplier audits to ensure conformity with all contractual and regulatory requirements.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 23 days
View Details
NAICS: 336612
New
Federal
HUB,PROPELLER,SHIP
Solicitation # N0010426QTB92
This contract, issued under Emergency Acquisition Flexibilities, seeks repair services for the HUB, PROPELLER, SHIP under solicitation N0010426QTB92, with a mandatory Repair Turnaround Time of 650 days measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. The contract requires strict adherence to MIL-STD-130 for item marking, ABS certification for each repaired unit with original signed certificates delivered with the asset and electronically in PDF format within seven calendar days of inspection, and compliance with all referenced technical standards and contractor-approved repair procedures. All work must be performed in accordance with government-approved drawings and directives, and any design, material, or part number changes require prior written approval by the NAVICP-MECH Contracting Officer, with substitutions categorized and documented under specific code requirements. The procurement is firm-fixed-price and subject to significant penalties for failure to meet the RTAT, with monthly price reductions per unit for unexcused delays up to a maximum amount specified by the contractor, without limiting the Government’s right to terminate for default. Government Source Inspection is mandatory, freight is FOB Origin and managed via the Navy’s Commercial Asset Visibility system, and the contractor must maintain all inspection records for 365 days after final delivery. The contract enforces Buy American provisions, cybersecurity maturity certification requirements, and small business subcontracting obligations, with mandatory use of Workflow Pro for payment and invoice submissions. Only authorized distributors of the original manufacturer may qualify, requiring proof of authorization, and all technical documents received from the Navy must be handled in accordance with designated distribution statements, particularly protecting against unauthorized disclosure. The awardee must also compare repair pricing to new unit cost and delivery lead time, and all deliverables must comply with DD Form 1423 data requirements.
Boat Building

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details
NAICS: 336611
New
Federal
TRAILING EDGE
Solicitation # N0010424QYE28
Ship Building and Repairing

POSTED

about 23 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333998
New
Federal
COUPLING ASSY, 1/4
Solicitation # N0010426QFC38
This contract involves the procurement of a 1/4 Inch Coupler Assembly designed for critical shipboard systems where failure could result in severe personnel injury, loss of life, or major equipment damage. The assembly is classified as Special Emphasis material (Level I, Scope of Certification) and must adhere to stringent material, manufacturing, and quality standards. The coupler includes non-metallic materials that require compliance with NAVSEA toxicity and flammability standards, and all materials and processes such as oxygen cleaning, welding, brazing, and thread inspection must follow detailed military and industry specifications. Thorough documentation, including certificates of compliance and certifications for chemical, mechanical, and non-destructive tests, is mandatory and must accompany shipments. The contract enforces tight traceability controls from raw materials through final assembly to ensure full conformance with approved specifications. Quality assurance requirements are extensive and include mandatory government quality system audits, source inspections, and strict control over subcontractors and government-furnished materials. Sampling plans for inspections follow prescribed standards with zero-defect criteria for lot acceptance. Engineering changes, waivers, or deviations require formal approvals, and all changes affecting product configuration must be documented and controlled. Packaging and marking must meet military standards, and deliveries are subject to acceptance only after certification data is reviewed and approved via the Wide Area Work Flow system. The contract also incorporates priority rating under the Defense Priorities and Allocations System for national defense and embodies emergency acquisition flexibility provisions. The overall intent is to assure the delivery of fully verified, high-reliability components essential to Navy ship safety and operational readiness.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
Federal
DUST COVER ARINC600
Solicitation # N0010426QEC43
The contract pertains to the procurement of a Dust Cover ARINC600 under solicitation number N0010426QEC43, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical (NAVSUP WSS-MECH) within the Department of Defense. The item must be manufactured by TE Connectivity Corporation with part number 213337-1 and must strictly conform to the technical specifications outlined in the contract, including design, materials, and dimensions. Any deviation from these requirements must be formally requested in advance with full justification, technical data supporting the alternative, and demonstration that the proposed change will not affect the part’s quality, form, fit, or function. The contract prohibits the intentional introduction of mercury or mercury-containing compounds into the product and requires full compliance with applicable cleaning and packaging standards, particularly MIL-PRF-23199 and MIL-STD-2073, with specific guidance on the use of heat-sealed envelopes and green poly bags for cleanliness-controlled components. Packaging materials must not include fire retardant, which is no longer required. Quality assurance obligations mandate that the contractor maintain a government-acceptable inspection system with records available throughout contract performance. The contract incorporates multiple standardized clauses including inspection and acceptance procedures, transportation by sea, cybersecurity maturity certification requirements, and mandatory use of Workflow Pro for payment processing. It also mandates adherence to priority rating requirements for national defense and energy programs, applies a total small business set-aside, and enforces security prohibitions as per deviation 2026-O0025. The awarding agency confirms that contractual documents are considered issued upon electronic transmission and that pricing submitted is valid for 60 days post-closing unless otherwise specified. Technical data package requirements are defined via DD Form 1423 with specific blocks for delivery timing, inspection authority codes, distribution statements, and pricing categories. All deliverables must be accompanied by a Certificate of Compliance per DI-MISC-81356 upon material delivery and must adhere to distribution restrictions defined by standardized codes (A–F) for information safeguarding. The response deadline is September 3, 2026, and the NAICS code 335931 identifies the industry as other electrical equipment and component manufacturing. All documents referenced must be used in their entirety unless approved otherwise by the contracting officer, and any request for revision exceptions requires two full-size printed copies for review.
Current-Carrying Wiring Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details
NAICS: 339991
New
Federal
SEAL ASSEMBLY
Solicitation # N0010426QFF88
This contract pertains to the refurbishment and delivery of a SEAL ASSEMBLY under solicitation N0010426QFF88, with a strict focus on safety-critical application in naval shipboard systems. The item is classified as Special Emphasis Level I, requiring full traceability from raw material through every manufacturing and repair step to final delivery, due to the high risk of catastrophic failure if defective. All work must conform to exacting standards including welding requirements under S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, chemical and mechanical testing per MIL-C-15726 and MIL-C-24679 for specific components, and mandatory non-destructive inspection using dye penetrant methods. Contractors must submit comprehensive Objective Quality Evidence including certified test reports, material certifications with electronic signatures, and weld procedure qualifications prior to any production. All deliverables must be accompanied by certifications submitted via WAWF to Portsmouth Naval Shipyard with designated DODAACs N50286 and N39040, and no material may be shipped without prior formal acceptance. The contract mandates a firm fixed-price or not-to-exceed quote covering full teardown, evaluation, inspection, and repair to "like new" or "A" condition, including a separate beyond-economic-repair price. Materials must be free of mercury, and traceability markings must be permanently applied in accordance with MIL-STD-792, with special provisions for small or plated surfaces requiring durable tags. Quality systems must comply with ISO-9001, ISO-10012, and ISO/IEC 17025, or alternately MIL-I-45208 and MIL-STD-45662, and are subject to government quality assurance at source with DCMA oversight. Receiving and final inspections require 100% verification of certification documents, traceability marks, and NDT results, with zero-defect acceptance criteria. Contractors must flow down all quality, certification, and traceability requirements to subcontractors, maintain detailed records, and submit any waivers or deviations through ECDS for contractual approval. Delivery is capped at 365 days from contract effective date, with certification data submissions due 20 days prior to each shipment. The entire process is governed by Buy American, cybersecurity maturity, and security exclusion clauses, with all contractual
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335929
New
Federal
CABLE,COAX ARMOR
Solicitation # N0010426QEC25
The contract pertains to the procurement of COAXIAL ARMOR CABLE under solicitation N0010426QEC25, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical Office. Pricing is valid for 60 days after the closing date unless otherwise specified, and all contractual documents are deemed issued upon electronic transmission or mail delivery. The scope mandates strict adherence to the Individual Repair Part Ordering Data (IRPOD) as the primary technical reference, with precedence given to contract amendments, schedule provisions, and terms and conditions in case of conflicts. Contractors must comply with specified revisions of referenced technical documents obtained via the BPMI e-Commerce portal, and may not mix revisions without written approval. All supplies must meet cleanliness control standards as defined in MIL-STD-767, MIL-STD-2041, or other IRPOD-identified requirements, and packaging must conform to MIL-PRF-23199 with specific provisions for heat-sealed envelopes and green poly bags; fire-retardant packaging is expressly prohibited. Mercury and mercury-containing compounds are strictly excluded from any part of the supplied material. Quality assurance obligations are governed by the IRPOD, requiring contractors to maintain an approved inspection system and retain complete inspection records available for government review throughout contract performance and beyond. Technical Data Packages (TDPs) are referenced through DD Form 1423, with specific instructions on data delivery timing, format, approval requirements, and distribution restrictions governed by DoD codes A through F. The cable must be delivered in 500-foot continuous lengths, accompanied by a Certificate of Compliance per DI-MISC-81356 for each unique NSN and item nomenclature combination, submitted at time of delivery. The contract enforces mandatory use of Workflow Pro, compliance with cybersecurity maturity model requirements, and adherence to small business program representations, veteran and disability equal opportunity mandates, and security prohibitions. A total small business set-aside is in effect, with NAICS code 335929 applicable. Delivery must occur at the specified location with inspection and acceptance governed by government representatives, and all waivers or deviations must be submitted in advance with full technical justification and supporting documentation. The contract is governed by FOB destination terms and requires adherence to priority rating for national defense purposes.
Other Communication and Energy Wire Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details
NAICS: 333914
New
Federal
COMPRESSOR,ROTARY
Solicitation # N0010426QJC06
This contract solicitation, issued under Emergency Acquisition Authority, seeks repair services for a ROTARY COMPRESSOR under a firm-fixed-price structure with a mandatory 636-day Repair Turnaround Time (RTAT), measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. All quotations must include unit and total pricing, confirmed RTAT, and, if unable to meet the required timeline, a detailed explanation of capacity constraints. The Government requires full compliance with MIL-STD-130 Rev N for marking, adherence to manufacturer specifications and technical directives, and performance of all inspections and tests consistent with original design standards. Inspection is mandatory and may be conducted by the Government at any point; contractor records of all inspection activities must be maintained for 365 days post-delivery. Delivery is FOB Origin, with freight handled by the Navy, and the contractor must ensure accurate CAV system reporting within five business days of receipt. Any failure to meet the RTAT will result in a per-unit, per-month price reduction, capped at a specified maximum, without limiting the Government’s right to terminate for default. The contractor must be an authorized distributor of the original manufacturer’s item, providing documented proof of authorization with the quote. The Cage Code for the awardee and any facility where repair occurs must be specified, and pricing must be justified against historical data or commercial market rates if the item has not been previously procured by NAVSUP WSS or if pricing exceeds prior levels. If an item is deemed Beyond Repair (BR), a limited T&E fee not to exceed a specified amount may be negotiated based on incurred costs. All technical documents referenced are to be obtained through official DoD sources, with strict controls on the distribution of materials marked with distribution statements such as C, D, E, or F, in alignment with OPNAVINST 5510.1. Compliance with cybersecurity maturity model certification requirements, small business subcontracting goals, and the mandatory use of Workflow Pro (WFP) Mod Assist are also contractually enforced. This solicitation is bilateral, requiring the contractor’s signed acceptance prior to award, and all responses must verify nomenclature, part number, and NSN prior to submission.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 314999
New
Federal
56--CLOTH, SALMON
Solicitation # N0010426QEB02
The contract is for the procurement of 64 rolls of salmon-colored cloth identified by NSN 1H-5640-016639974-X3 with TDP Version 004, to be delivered to two locations: W25G1U in New Cumberland, Pennsylvania, and W62G2T in Tracy, California, both under DLA Distribution. The Government does not own the data or intellectual property rights necessary to source this item from alternative suppliers, and it has been determined that acquiring those rights or reverse engineering the part would be uneconomical. As a result, the Government intends to proceed with a sole-source procurement under FAR 6.302-1, limiting competition to a single vendor. Although this is not a formal request for proposals, any responsible sources may submit interest, capability statements, or quotations within 45 days of the notice publication, or within 30 days if awarded under an existing Basic Ordering Agreement, and these submissions will be reviewed solely to evaluate whether a competitive procurement is warranted. The final decision to proceed without competition rests entirely at the Government’s discretion. The solicitation number is N0010426QEB02, posted on July 18, 2026, with a response deadline of September 2, 2026. The item is classified under the title “56--CLOTH, SALMON” and the contracting office is the Navsup Weapon Systems Support Mech, part of the Department of Defense, located in Mechanicsburg, Pennsylvania. The primary point of contact for inquiries is Amber C. Long, reachable via email at AMBER.C.LONG3.CIV@US.NAVY.MIL or by phone at (771) 229-0053. No set-aside type or NAICS code is specified, and the place of performance is not further detailed beyond the delivery addresses. All submissions must be received by the deadline to be considered, and no assurance is given that competition will be opened regardless of responses received.
All Other Miscellaneous Textile Product Mills

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details
NAICS: 335313
New
Federal
SWITCH ASSEMBLY
Solicitation # N0010426QYA11
This contract pertains to the repair of a SWITCH ASSEMBLY under a fixed-price arrangement, with requirements governed by military standards and Navy-specific directives. The work must conform to the original manufacturer’s specifications and drawings, and all repairs must be performed using the contractor’s approved technical procedures, manuals, and tooling instructions. The item must be marked in compliance with MIL-STD-130 Rev N and must be completely free of metallic mercury and mercury contamination, as its use is prohibited on submarines and surface ships due to severe corrosion and toxicity risks. Any proposed design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, with substitutions categorized under specific code designations. The contract mandates rigorous quality assurance, with the contractor fully responsible for all inspections and testing, maintaining records for 365 days after final delivery. Preservation, packaging, and marking must adhere to MIL-STD-2073, and all subcontractors must comply with the same mercury-free and quality standards. The solicitation, identified as N0010426QYA11, has a response deadline of June 22, 2026, and is issued under Emergency Acquisition Flexibilities with an estimated RTAT of 125 days, which includes time to repair the item to "A" condition and return it to the Navy. The resultant award requires bilateral acceptance, and contractors must include the option for increased quantity in their proposals. Only authorized distributors of the original manufacturer may submit offers, requiring formal documentation to verify authorization. The contract incorporates Buy American provisions, warranty coverage for one year after delivery, and limitations on pass-through charges. It also includes clauses for annual representations and certifications, priority ratings for national defense purposes, and compliance with the wide area workflow payment system. Technical documents referenced are obtainable through specific Navy and DOD channels, with strict controls on distribution statements to prevent unauthorized dissemination. All correspondence and submissions must be directed to the designated point of contact, Jessica M. Gershenfeld, via email.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332919
New
Federal
PARTS KIT,BALL VALV
Solicitation # N0010426QFG15
This contract requires the supply of a specialized parts kit for a size 5-inch ball valve, including a ball and two seats, intended for use in a critical shipboard system where failure could lead to catastrophic consequences including loss of life or the vessel itself. The materials must meet exacting specifications, with the ball fabricated from SAE-AMS-6931 or centrifugally cast 6AL-4V titanium meeting ASTM-B367 Grade C-5 standards, and the seats made from Torlon 4503, 4203, or 4203L polyamide-imide per Electric Boat Specification 4147. Strict certification and traceability protocols are mandated, requiring full chemical and mechanical documentation linked to unique heat or batch codes permanently marked on each component. The ball must undergo hydrostatic or dye penetrant testing with zero tolerance for leakage or deformation, and ultrasonic inspection is required for the starting material. All welding and brazing must comply with S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with procedures and personnel qualifications submitted for Navy approval prior to execution. The contract imposes a comprehensive quality assurance framework requiring ISO-9001 or MIL-I-45208 quality systems, with government oversight at the manufacturer’s facility, and mandates that all certifications be submitted via the Wide Area WorkFlow system to Portsmouth Naval Shipyard for review and acceptance prior to shipment. Material traceability must be maintained from raw stock through every manufacturing and subcontracted operation, with non-metallic parts requiring batch-specific certifications and metallic parts undergoing re-certification if subjected to processing that alters properties. Deliveries are restricted to one year from contract effective date, with no material allowed to be shipped without formal acceptance by the government. The contractor must maintain detailed records of inspections, defects, and corrective actions, and all waivers or deviations require written approval from the Contracting Officer. The requirement is a total small business set-aside, subject to Buy American and security restrictions, and necessitates a facility clearance for access to classified drawings referenced under DD Form 254. All documentation must be electronically submitted through ECDS, and the contractor is bound by mandatory Navy regulations including mercury-free compliance, configuration control, and non-destructive testing standards.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 27 days
View Details