Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Unable to Retrieve Subcontract Opportunities

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled "Unable to Retrieve Subcontract Opportunities" was posted on August 3, 2026, with a response deadline of August 14, 2026, and relates to a subcontract opportunity under the ACTIVE DEVICES DIVISION of the Department of Defense. Despite the classification as a subcontract, no specific subcontract opportunities could be identified due to a system error that rendered the knowledge base inaccessible, resulting in repeated gateway timeouts during attempts to retrieve details. The place of performance is listed as New Cumberland, Pennsylvania, with a zip code of 17070-5002, though no city, state, or country code was provided for the office address, and the point of contact information is unavailable. The NAICS code is marked as NA, and no set-aside type or description is specified. The official UI link for the solicitation is provided as https://www.dibbs.bsm.dla.mil/rfq/rfqrec.aspx?sn=SPE7M526T366N, but no solicitation number is present in the record.

General Info

Contract posted August 3, 2026, for DoD subcontract in New Cumberland, PA, but no opportunities retrievable due to system error.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Due to a system error, no subcontract opportunities could be identified at this time. The knowledge base was inaccessible because of repeated gateway timeouts.

Similar Contracts

Same NAICS industry code

Unable to Decompose Subcontract OpportunitiesThe contract is a Small Business Set Aside - Total opportunity under the Department of Defense, classified as a subcontract with no identifiable prime contract details due to system limitations. It was posted on August 4, 2026, and responses are due by September 7, 2026, at 2:00 PM. The North American Industry Classification System code is not provided, and no specific organization type or point of contact is listed. The place of performance is tied to a zip code of 68123, though no city, state, or country details are available. The solicitation number is null, and the agency name appears as FA4600 55 Cons Pkp, with no office address information provided. The opportunity can be viewed online through the SAM.gov workspace link.

FA4600 55 Cons Pkp

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Unable to Retrieve Subcontract OpportunitiesThe contract titled "Unable to Retrieve Subcontract Opportunities" was posted on August 4, 2026, with a response deadline of August 18, 2026, at 3:00 PM. It is categorized as a subcontract opportunity managed by DAS Procurement under the Connecticut agency office. No solicitation number, NAICS code, type of set-aside, or organizational details are provided, and key location information including city, state, zip code, and point of contact is missing. The system was unable to decompose the prime contract or retrieve associated subcontract opportunities due to gateway timeouts. All relevant information to pursue this opportunity must be obtained through the official portal link provided.

DAS Procurement

POSTED

about 15 hours ago

DEADLINE

Unable to Decompose Prime ContractThe contract pertains to a subcontract opportunity posted by the County of Santa Barbara Department of Public Works Transportation Division, with a place of performance in Eastern Goleta Valley, California, ZIP code 93111. The solicitation was posted on August 4, 2026, and responses are due by August 18, 2026, at 9:00 PM Eastern Time. The prime contract details could not be retrieved due to system timeouts, which has prevented the full decomposition of the opportunity into specific subcontract components. As a result, key information such as the solicitation number, NAICS code, type of set aside, organization type, and point of contact is unavailable. The contract type is listed as a subcontract, but no further classification or funding details are provided. Interested parties can access the posting through the provided uiLink for additional context, though essential specifications remain obscured.

COUNTY OF SANTA BARBARA DEPARTMENT OF PUBLIC WORKS TRANSPORTATION DIVISION

POSTED

about 15 hours ago

DEADLINE

Unable to Decompose Subcontract OpportunitiesA system outage has prevented the retrieval of any data related to the prime contract, making it impossible to decompose or identify potential subcontract opportunities. The solicitation, posted on August 4, 2026, with a response deadline of August 27, 2026, is classified as a subcontract under the agency designation DTMB, specifically the Michigan office. There is no valid NAICS code, set-aside information, or organizational type provided, and no point of contact or physical address is available. The place of performance is listed as various locations without specific city or state details, and the official portal for this posting is accessible via a Michigan government website link, though no further bid details can be inferred due to the missing prime contract data.

POSTED

about 23 hours ago

DEADLINE

Unable to Decompose Subcontract OpportunitiesThe contract titled "Unable to Decompose Subcontract Opportunities" was posted on August 3, 2026, with a response deadline of August 18, 2026, at 1:30 PM. It is categorized as a subcontract opportunity under the Florida Department of Transportation, specifically linked to the Florida agency office. No solicitation number, set-aside type, NAICS code, or organizational details are provided, and key information such as the office address, place of performance location, and point of contact is incomplete or unavailable. The system was unable to retrieve prime contract details, preventing the breakdown of potential subcontract opportunities. All further information must be accessed through the provided vendor portal link.

Florida Department of Transportation

POSTED

DEADLINE

Unable to Decompose Subcontract OpportunitiesThe contract titled "Unable to Decompose Subcontract Opportunities" was posted on August 3, 2026, with a response deadline of August 17, 2026, and is classified as a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5. It is associated with the Maritime Supply Chain organization within the Department of Defense and is designated for performance in San Diego, California, with a ZIP code of 92136-3581. Due to gateway timeouts, critical data necessary for subcontract decomposition—such as the prime contract’s scope, CLINs, and metadata—could not be retrieved, preventing any meaningful identification of supplier or subcontractor opportunities. The NAICS code is listed as NA, and no point of contact or organizational type is provided. The solicitation number is null, and the only available access point is a URL linking to the DIBBS platform for further reference.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

No subcontract opportunities identifiedNo subcontract opportunities have been identified under this solicitation, which was posted on August 3, 2026, with a response deadline of August 18, 2026. The opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, intended exclusively for small businesses, though the NAICS code is not provided and no specific details about the work scope, location, or point of contact are available. The action is managed by the Strategic Acquisition Program Directorate within the Department of Defense, but no office address or place of performance has been specified. Interested parties can access additional information through the provided DIBBS link, though no subcontractor or supplier opportunities are currently discernible.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Data Retrieval UnavailableThe contract titled Data Retrieval Unavailable was posted on August 3, 2026, with a response deadline of August 14, 2026, and is categorized as a subcontract under the Defense Logistics Agency within the Department of Defense. No solicitation number, set-aside details, NAICS code, or organizational type is provided, and system limitations have prevented access to essential prime contract data, subcontract decomposition, or supplier opportunity analysis. The office address, place of performance, and point of contact information are all unspecified, and no details regarding performance location or procurement preferences are available. Interested parties can access further information through the provided DIBBS link, though critical data necessary for bid preparation remains unavailable due to system constraints.

Defense Logistics Agency

POSTED

DEADLINE

Data Retrieval FailedThe contract opportunity, identified by solicitation number SPE8E826Q0445, was posted on August 3, 2026, with a response deadline of August 10, 2026, and is classified as a subcontract under the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. No details regarding the prime contract, set-aside type, NAICS code, or organizational structure are available, preventing any assessment of eligibility criteria or contracting scope. The place of performance and point of contact information are also unspecified, limiting clarity on location or communication channels. Despite the lack of decomposable subcontract details due to system unavailability, the opportunity remains active within the DIBBS platform, and interested parties are expected to reference the provided UI link for further procedural guidance, though no substantive contract requirements or specifications are currently accessible.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Unable to Decompose Subcontract OpportunitiesThe contract solicitation titled "Unable to Decompose Subcontract Opportunities" was posted on August 3, 2026, with a response deadline of August 14, 2026, and is categorized as a subcontract opportunity under the Department of Defense, specifically managed by the LAND SUPPLY CHAIN. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, though no specific city, state, or country details are provided beyond that. The NAICS code is listed as NA, and no set-aside type or description is available, indicating a lack of designated small business or special programming criteria. The agency has not identified any subcontract opportunities within this solicitation, and no point of contact information is provided, limiting direct communication pathways. The official solicitation can be accessed via the DIBBS platform at the provided URL, though system limitations have prevented the retrieval of detailed contract data or decomposable subcontract opportunities.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Unable to decompose prime contract due to system unavailabilityThe contract opportunity is labeled as a subcontract under a Total Small Business Set-Aside, intended exclusively for small businesses as defined by the SBA. It was posted on August 3, 2026, with a response deadline of August 18, 2026, and is managed by the Strategic Acq Program Directorate within the Department of Defense. The solicitation number is SPE7LX26U9176, and the associated system was unable to retrieve the parent prime contract details due to a gateway timeout, preventing any decomposition or identification of subcontracting opportunities. No NAICS code, place of performance, point of contact, or organizational details are available, and key fields such as city, state, and zip code for the office or performance location remain unspecified. The opportunity is accessible only through the provided DIBBS link.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Unable to Retrieve Subcontract OpportunitiesA system error prevented the retrieval of detailed subcontract opportunities under the prime contract, rendering the specific scope, deliverables, and subcontract structure unavailable for analysis. The solicitation, posted on August 3, 2026, with a response deadline of August 14, 2026, is categorized as a subcontract solicitation managed by the Department of Defense under the Albany Transportation Officer office. The place of performance is listed as Albany, Georgia with a zip code of 31704-1128, though no further details on the physical location, point of contact, or set-aside status are provided. The NAICS code is marked as NA, and no organization type or set-aside description is available. Interested parties must refer to the official DIBBS link for any potential updates or additional information, as the current data is incomplete due to the technical failure.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

RESISTOR, FIXED, WIRE

Solicitation # SPE7M5-26-T-367E

This contract specifies the procurement of a fixed wire resistor with part number RER55F36R5R and NSN 5905-01-134-1187, meeting technical specifications MIL-PRF-39009/2C and MIL-PRF-39009E, both dated August 5, 2022. The item is classified as a critical application component, and all manufacturing, testing, and processing procedures are prohibited from using Class I ozone-depleting substances unless explicit written approval is obtained from the Contracting Officer. The resistor must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which mandates clear identification of lead content on every unit package. Delivery is required within ten days of contract award, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination. The sole quantity ordered is one unit, shipped via traceable freight methods excluding parcel post to the designated military address at Fort Benning, Georgia. All performance, material, and marking requirements are governed by referenced military specifications and DLA master lists, with no exceptions permitted unless formally approved.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 10 hours ago

DEADLINE

CONNECTOR BODY, RECE

Solicitation # SPE7M5-26-T-367P

This contract specifies the procurement of a connector body receptacle with part number 5935-00-892-3059, requiring one unit to be delivered within 20 days to the destination FPO AE 09578 aboard the USS McFaul DDG74. The item is classified as a critical application and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless explicit written approval from the contracting officer is obtained, and mercury or mercury-containing compounds are banned from direct contact with the hardware except in limited, specially defined cases such as functional mercury in batteries or fluorescent lights, which must include a secondary containment boundary. Compliance with MIL-STD-1916 or equivalent zero-based sampling plans is required for inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or corresponding AQLs, and acceptance must result in zero non-conformances unless otherwise stated. Packaging, marking, and preservation must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-55330, with special marking code 00-00 indicating no additional requirements. The delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur upon receipt at the destination. The contract also mandates adherence to Department of Defense transportation protocols, including specific procedures for vessel and DLA vendor shipments, and includes designated government-use fields for tracking and logistics compliance.

Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

COVER, ELECTRICAL CO

Solicitation # SPE7M5-26-T-367F

The contract specifies the procurement of three electrical cover units with NSN 5935-01-534-4832 and part number 660-012NF15U6-106, under solicitation SPE7M5-26-T-367F, with a required delivery within 20 days of award. The item is to be delivered FOB destination, with no tolerance for quantity variance, and inspected and accepted at the delivery point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is not classified as hazardous per FED-STD-313, it must be commercially packaged per SPE7M5-26-T-367F and palletized per RP001 requirements. Government identification must be removed from non-accepted supplies, and all items must be physically identified per RQ017. Delivery is directed to MALS-12 at MCAS Iwakuni, Japan, with a secondary parcel post address at FPO AP 96310-7161. Transportation logistics follow DLAD Proc Note C19 for vessel shipment and C20 for first destination transport. The original required delivery date is July 30, 2026, and the contract is issued under a federal solicitation managed by the Department of Defense’s Active Devices Division with point of contact Margaret Smith.

Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

RADOME, POLARIZER

Solicitation # SPE7M5-26-Q-0829

The contract is for the procurement of 12 units of a RADOME, POLARIZER with NSN/Part Number 5985-01-157-5180 under solicitation SPE7M5-26-Q-0829, which is a total small business set-aside under NAICS code 334220. The offering is issued by the Department of Defense’s Active Devices Division, with a response deadline of August 19, 2026, and requires delivery within 463 days after order. The technical and quality requirements governing this acquisition are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Access to the controlled technical data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been approved by DLA. Configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. The contract also mandates CMMC Level 2 certification from third-party assessment organizations for cybersecurity compliance and incorporates DLA packaging standards for procurement.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE7M5-26-T-367K

The contract pertains to the procurement of twelve antennas under NSN 5985-99-671-2175, with a delivery requirement of 234 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision active on the RFP issue date unless amended. Alternate offerors must submit a complete data package including documentation for both the approved and alternate parts. The solicitation numbers SPE7M5-26-T-367K was posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 334220, and is managed by the Department of Defense’s Active Devices Division. The point of contact is Matthew Stanko, reachable at fmtewiq@dla.mil or 312-850-7245, and performance is to occur in New Cumberland, Pennsylvania, 17070-5002.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

FUSE, CARTRIDGE

Solicitation # SPE7M5-26-T-367D

This contract is for the procurement of one cartridge fuse, identified by NSN 5920-01-368-3718 and commercial part numbers JJN-60 from Cooper Bussmann, LLC and 128311013 from Eaton Corporation, categorized as a commercial off-the-shelf item. The requirement is governed by DLA packaging standards under MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required and packaging configured for dry storage without cushioning or intermediate containers. Delivery is due within 20 days from the contract date, FOB origin, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be shipped to the designated military logistic site in Soto Cano, Honduras, and is subject to DLA transport protocols, including procurement notes C19 and C20 for freight handling. The procurement is issued under solicitation SPE7M5-26-T-367D, with a response deadline of August 17, 2026, and a required delivery date of July 30, 2026. Technical and quality requirements referenced via R and I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. The unit of issue is each, priced at $1.00, totaling $1.00 for the single unit. The point of contact is Matthew Stanko, and the solicitation is managed by the Department of Defense’s Active Devices Division. Government-use identifiers and logistical codes are embedded in the shipment data, and the item must comply with all hazardous materials transportation guidelines as outlined in DLA procedural notes, despite not being classified as hazardous.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

SEMICONDUCTOR DEVICE, T

Solicitation # SPE7M5-26-T-366Y

The contract specifies the procurement of a semiconductor device, specifically a thyristor, identified by NSN 5961-01-480-5281, with a quantity of two units. The item is classified as a commercial off the shelf product, and the procurement is governed by stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The supplier must comply with qualified suppliers and testing lists for Federal Supply Class 5961 and 5962, as defined in Procurement Note M01, and adhere to physical marking standards for bare items. Packaging must meet DLA-specific requirements, and the contractor is obligated to retain full supply chain traceability documentation as mandated by DLAD Procurement Note C03 from August 2016. Additionally, government identification must be removed from any non-accepted supplies. The solicitation is issued under SPE7M5-26-T-366Y, with a response deadline of August 17, 2026, and delivery is required within 20 days after award. The place of performance is Keyport, WA, and the contracting office is the Department of Defense's Active Devices Division, with Margaret Smith as the primary point of contact.

Semiconductor and Related Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

COVER, ELECTRICAL CO

Solicitation # SPE7M5-26-T-367G

This contract involves the procurement of a cover for an electrical connector with part number 660-012NF21U6-208 and NSN 5935-01-549-5224, for a quantity of four units at a unit price of four dollars, totaling sixteen dollars. Delivery is required within twenty days to the destination FPO AP 96310-7161 under FOB destination terms, with no tolerance for quantity variance. The item must comply with strict packaging and preservation standards as defined by MIL-STD-2073-1E and MIL-DTL-55330 for connectors, and marking must conform to MIL-STD-129 with no special marking code. All packaging and palletization must meet DLA’s procurement requirements, and the use of any Class I ozone-depleting substances in manufacturing, testing, or cleaning is strictly prohibited unless written approval is secured from the contracting officer—a restriction that overrides any conflicting specification but does not lessen performance obligations. The item is subject to inspection and acceptance at the delivery point, and transportation logistics follow specific DLA procedural notes C19 and C20. The solicitation number is SPE7M5-26-T-367G, issued by the Department of Defense’s Active Devices Division, with a response deadline of August 17, 2026, and an original required delivery date of July 30, 2026. Technical and quality requirements referenced under R or I numbers are governed by the DLA Master List, and the applicable revision depends on whether it is a simplified or large acquisition as defined by solicitation and award timelines.

Current-Carrying Wiring Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRI

Solicitation # SPE7M5-26-Q-0830

The contract is for the procurement of three electrical plug connectors identified by NSN 5935-01-374-7034 and part number M83723/86W2028N, conforming to MIL-DTL-83723H Rev H and MIL-DTL-83723/86E Rev E specifications dated January and March 2024 respectively. This is a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, and all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence. The product is designated as a critical application item and must not contain any Class I ozone-depleting chemicals, with any substitute chemicals requiring prior approval. All items must be marked and labeled per MIL-STD-129, packaged in accordance with DLA packaging standards RP001, and shipped commercially per ASTM D3951 unless classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. Palletization must follow RP001 guidelines, and the unit of issue is each, with zero variance allowed in quantity. Delivery is required within 90 days after award, with FOB origin terms and inspection and acceptance occurring at destination. The shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania and the contract is managed by the Department of Defense’s Active Devices Division with Andrew Bracken as the primary point of contact. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, and the material is needed by March 19, 2027.

Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

CLAMP, CABLE, ELECTRI

Solicitation # SPE7M5-26-T-366W

The contract pertains to the procurement of two electrical cable clamps with part number 620FS003NF10 and NSN 5935-01-624-8720, supplied by Glenair, Inc. Delivery is required within 20 days to RAF Lakenheath, United Kingdom, under FOB origin terms with no tolerance for quantity variance. The items must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, without any special marking codes. Packaging must adhere to DLA packaging requirements, and the use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicit written approval is obtained from the contracting officer; this restriction does not apply to commercial items as defined by FAR 11.001. Inspection and acceptance occur at the destination, and the shipment must follow DLA transport procedures noted in C19 and C20 with aRDD identifier of 777. The contract references the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The unit of issue is each, priced at $2.00 per unit, totaling $4.00 for the order. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Active Devices Division through Margaret Smith, with the primary point of contact provided.

Other Building Material Dealers

POSTED

about 10 hours ago

DEADLINE

SWITCH, SEQUENCING

Solicitation # SPE7M5-26-T-367L

This contract solicitation, identified by SPE7M5-26-T-367L, is for 185 units of SWITCH, SEQUENCING with NSN 5930-00-246-9757, under a Women-Owned Small Business Set-Aside, and requires delivery within 93 days after order. Mandatory source inspection must occur at the manufacturer’s facility, and surplus materials are not acceptable. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item must conform to both the cited technical data and the specified part number, and vendor control drawings apply. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with supplied hardware, except in specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract mandates CMMC Level 2 certification by a third-party assessment organization for cybersecurity compliance. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior governmental authorization for any disclosure to foreign persons, regardless of location. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and formal DLA authorization may access restricted technical data. The contract is managed by the Department of Defense’s Active Devices Division, with performance to be delivered to Jacksonville, Florida, and inquiries directed to Lea Dawn Robertson.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

CONTACT, ELECTRICAL

Solicitation # SPE7M5-26-T-366U

This contract pertains to the procurement of electrical contacts identified by NSN 5999-01-457-0915 and part number Molex LLC 1UX99 P/N 16-02-0117, with a quantity of 24 units to be delivered within 20 days under solicitation SPE7M5-26-T-366U. The items must be furnished in strict compliance with DLA packaging standards, including MIL-STD-2073-1E and MIL-STD-129 for marking, and must not contain mercury or mercury compounds unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or weapons systems as defined by NAVSEA. Any exempted mercury-containing devices must include a secondary containment to prevent leakage and meet NAVSEA 5100-003D requirements. Packaging and shipping instructions specify that delivery must be FOB origin, inspected at destination, and shipped via the fastest traceable method without parcel post, with freight directed to the Naval Station Newport address and a separate parcel post address for administrative purposes. The contract enforces zero variance in quantity, requires adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and includes detailed packaging codes, containment methods, and special handling directives. The required delivery date is July 31, 2026, with the solicitation issued on August 4, 2026 and responses due by August 17, 2026, under a federal procurement framework governed by the Department of Defense and managed by the Active Devices Division.

Current-Carrying Wiring Device Manufacturing

POSTED

about 10 hours ago

DEADLINE