Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Uninterruptible Power Supply (UPS) System Supplier

Active

International

Response Deadline10/06/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement of one plug-and-play Uninterruptible Power Supply (UPS) system for the National Research Council Canada in Boucherville, Quebec. The system must be fully configured for immediate use without the need for on-site installation and delivered to laboratory L6-008/010. The primary objective of the equipment is to ensure compatibility with Biologic BCS-815 battery cyclers to prevent data loss and thermal runaway during power outages. This requirement falls under NAICS code 335910, with a response deadline set for October 6, 2026.

General Info

Procure one plug-and-play UPS for NRC Canada in Boucherville by October 6, 2026.

Agency

Government of Canada → National Research Council of Canada

NAICS

335910 - Battery Manufacturing

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

This scope was carved out of 26-58072-B.

The full solicitation package (10 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Uninterruptible Power Supply (UPS)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 22

subcontract

Response DeadlineOct 6

Submission deadline

Response Deadline

10/06/2026, 07:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → National Research Council of Canada

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies one plug-and-play Uninterruptible Power Supply (UPS) system for prime contractors on National Research Council Canada (NRC) projects in Boucherville, Quebec. Provides a unit compatible with Biologic BCS-815 battery cyclers to prevent thermal runaway and data loss during power outages. Ensures the system is configured for immediate use without on-site installation. Delivers one fully functional UPS system to laboratory L6-008/010.

Similar Contracts

Same NAICS industry code

Long-Duration Energy Storage (LDES) Battery System

Solicitation # INL-26-050

Idaho National Laboratory (INL) and Argonne National Laboratory (ANL) have issued an Expression of Interest (EOI) under solicitation INL-26-050 to identify qualified vendors for non-lithium, rechargeable electrochemical long-duration energy storage (LDES) battery systems. The objective is to acquire systems for benchmark performance testing, specifically requiring two modules with at least 10 kW continuous power and 100 kWh usable energy, and one full-scale system with at least 100 kW continuous power and 1,000 kWh usable energy. All systems must be capable of at least 10 hours of continuous discharge, operate between 0 to 50 degrees Celsius, and possess a minimum field lifetime of 15 years. Acceptable technologies must be pre-built and exclude lithium-ion, lithium metal, lead-acid, and redox flow batteries. Technical requirements include a 3-phase 480 VAC AC interface and an isolated 800-1500 VDC DC interface, with support for SCADA protocols such as Modbus TCP/IP, DNP3, or IEC 61850. Systems must comply with NFPA 855, UL 9540/9540A, and NEC/IEEE standards, and include comprehensive hazard assessments and safety systems. Deliverables involve 70%, 90%, and final design packages, along with Factory and Site Acceptance Testing reports. Modules are to be delivered to INL within approximately three months of design acceptance, while the full-scale system is destined for ANL within six months. This EOI serves as a preliminary screening process to inform a future Request for Proposal (RFP); interested vendors must submit a consolidated response by September 24, 2026, to Chase Egbert.

Battelle Energy Alliance–doe Cntr

POSTED

about 21 hours ago

DEADLINE

RFP for Battery Bank and Chargers - Holyrood

Solicitation # 109633 CM

Newfoundland Labrador Hydro has issued Request for Proposals number 109633 CM for the supply, testing, and delivery of a 125VDC Battery Bank and two redundant Battery Chargers for the Holyrood Thermal Generation Station. The battery bank must consist of 60 Vented Lead-Acid flooded lead-acid cells with an ampacity of 408Amps to achieve a nominal 125VDC output. All deliverables, including the battery bank and chargers, are required by April 30, 2027. The scope includes a mandatory factory acceptance test at the OEM factory, while on-site commissioning by an engineer or technician is offered as an optional service. Shipping must be conducted under DDP Incoterms 2020, and the vendor is responsible for providing a forklift and operator for off-loading at the delivery site. The evaluation process follows a four-stage sequential method: a pass/fail review of mandatory submission requirements, a pass/fail assessment of mandatory technical requirements, a scoring of non-price rated criteria, and finally, a pricing evaluation. The contract award will be based on a ranked scoring system of the combined technical and price scores, with the top-ranked proponent invited to direct negotiations. Proponents must provide an ISO Quality Assurance Program Certification and certified copies of factory acceptance testing protocols and quality control logs. Additionally, the supplier is required to maintain all necessary records for seven years and must adhere to strict packaging standards, including rust-inhibitive coatings on metal surfaces and removable plastic covers for battery terminal protection.

Newfoundland Labrador Hydro

POSTED

DEADLINE

NiMH Rechargeable Storage Battery SupplierThis subcontract through the Department of Defense for DLA DIST SAN JOAQUIN involves the supply of 57 rechargeable NiMH storage batteries for prime contractors. The batteries must feature NiMH chemistry and a 24-month Shelf Life Type I. Performance is based out of Tracy, California, under NAICS code 335910. The supplier is required to adhere to strict quality and safety standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Sampling must be conducted according to MIL-STD-1916 or ASQ H1331. Additionally, the provider must supply all necessary SDS and OSHA hazard labels for the transport and handling of these hazardous materials.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Electrical Receptacle Connectors (NSN 5935-01-423-6809)This subcontract involves the supply of 24 electrical receptacle connectors, identified by NSN 5935014236809, for prime contractors fulfilling Department of Defense supply contracts through the Active Devices Division. The contractor is responsible for providing the units, ensuring packaging adheres to RP001 DLA Packaging Requirements, and shipping the items via FOB Origin. Performance is centered in Patuxent River, Virginia, under NAICS code 335910. The agreement requires strict compliance with DFARS export controls and DFARS 252.223-7008 regarding the restriction of Hexavalent Chromium. The solicitation was posted on September 24, 2026, with a response deadline of October 5, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Maintenance-Free Lead Acid Storage Battery SupplierThis subcontract opportunity with the Defense Logistics Agency involves the supply of maintenance-free lead acid storage batteries for prime contractors. The supplier is responsible for manufacturing or sourcing batteries that maintain a Type I shelf life of 12 months and adhere to MIL-STD-1916 or ASQ H1331 sampling plans. All deliverables must include physical batteries along with required hazardous materials documentation, including MSDS/PSDS per FED-STD-313, while ensuring all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129P(4). The contract falls under NAICS code 335910 and is managed by the Department of Defense. Interested parties must respond by October 5, 2026, for performance at the FPO location. Detailed solicitation information is available through the DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

Manufacture of Cable Assembly (NSN 5995-01-698-2842)This subcontract involves the manufacture and supply of two cable assemblies under NSN 5995-01-698-2842 for prime contractors supporting DLA Aviation supply contracts. The work is managed by the ASC Commodities Division of the Department of Defense and is performed in Tracy, California. All assemblies must be fabricated to military specifications, with bare item marking conducted per RQ017 and quality assurance executed according to MIL-STD-1916 or ASQ H1331. Compliance requirements are strict, necessitating materials that adhere to DFARS 252.223-7008 and quality systems that meet SAE AS9003 or ISO 9001 standards. The opportunity falls under NAICS code 335910, with a response deadline of October 2, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Conductor Bus (NSN 6150-01-336-5078)This subcontract involves the manufacture or sourcing of two conductor bus units meeting NSN 6150-01-336-5078 specifications for prime contractors supporting DLA Aviation supply contracts. The work is managed under the Department of Defense ASC Commodities Division, with performance taking place in Jacksonville. The provider must adhere to strict quality and compliance standards, implementing systems per SAE AS9003 or ISO 9001 and performing sampling according to MIL-STD-1916 or ASQ H1331. All packaging and labeling must strictly follow MIL-STD-129 requirements. The solicitation was posted on September 24, 2026, with a response deadline of October 2, 2026, under NAICS code 335910.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Battery Chargers (NSN 6130-01-706-1206)This subcontract involves the procurement or manufacture of 2,000 units of Battery Chargers under NSN 6130-01-706-1206 for prime contractors supporting DLA Land and Maritime supply contracts. The contractor is responsible for ensuring all items are packaged according to ASTM D3951 and marked and labeled in compliance with MIL-STD-129. Additionally, the supplier must adhere to DFARS 252.223-7008, which prohibits the use of hexavalent chromium. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with the place of performance located in New Cumberland, Pennsylvania. The opportunity falls under NAICS code 335910 and was posted on September 24, 2026, with a response deadline of October 5, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Non-Rechargeable Batteries (NSN 6135014821290)This subcontract is for the supply of 100 non-rechargeable batteries, identified by NSN 6135014821290, to prime contractors supporting DLA DIST SAN JOAQUIN. The contract requires strict adherence to RP001 DLA packaging standards and the provision of Safety Data Sheets and Hazardous Communication Standard labels in compliance with 29 C.F.R. 1910.1200. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335910 for the Department of Defense. Performance will take place in Tracy, California, with a response deadline of October 5, 2026.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Nonrechargeable Batteries (NSN 6135-00-8801026)This subcontract involves the supply of 42 units of nonrechargeable batteries, specifically part number A221/505A matching NSN 6135-00-8801026, for prime contractors supporting the Defense Logistics Agency. The contract is managed by the DLA DIST San Joaquin under the Department of Defense, with the place of performance located in Tracy, California. To be eligible, suppliers must possess a valid CAGE code and complete standard DLA supplier registration. All items must be packaged in strict accordance with the RP001 DLA Packaging Requirements for Procurement. The response deadline for this opportunity is October 5, 2026.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Storage Batteries (NSN 6140-01-338-9155)This subcontract involves the supply of 419 storage batteries under NSN 6140-01-338-9155 for prime contractors supporting DLA Land and Maritime. The required equipment must be provided as either Union Battery MX06040 or Power-Sonic PS-640F1. All units must be delivered FOB Destination to DLA Distribution Cherry Point, North Carolina. The contractor is responsible for adhering to strict packaging and marking standards per MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the handling of hazardous materials must comply with 29 CFR 1910.1200, including the provision of necessary Material Safety Data Sheets. This requirement falls under NAICS code 335910 and is managed by the Department of Defense.

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

Supplier of Electrical Solenoids (NSN 5945-01-611-4246)This subcontract involves the supply of 42 electrical solenoids, specifically NSN 5945-01-611-4246, to prime contractors supporting Defense Logistics Agency supply contracts. The work is managed by the Active Devices Division of the Department of Defense and will be performed in New Cumberland, Pennsylvania. The supplier is responsible for manufacturing or sourcing the components and must adhere to strict military and industry standards. This includes marking per MIL-STD-129, packaging per MIL-STD-2073-1E and RP001, and applying lead finish markings according to IPC/JEDEC J-STD-609. Additionally, the supplier must provide hazard labels in compliance with 29 CFR 1910.1200 and ensure all units are individually packed and palletized for delivery.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

GMP Clean Room Facility Rental/Provision

Lessors of Nonresidential Buildings (except Miniwarehouses)

POSTED

DEADLINE

GMP Biomanufacturing Training Specialist (USP/DSP)

Professional and Management Development Training

POSTED

DEADLINE

Web-based Platform for Whole Building Life Cycle Analysis (WBLCA) and Embodied Carbon emissions in building and infrastructure construction

Solicitation # 26-58047

The National Research Council Canada is soliciting proposals for the design, development, configuration, deployment, and ongoing support of a secure, scalable, and bilingual web-based digital platform. This platform is intended to centralize the reporting, review, analysis, and visualization of embodied carbon emissions for building and infrastructure construction projects, ensuring alignment with carbon disclosure and reduction policies. Key functional requirements include the intake of project-specific embodied carbon submissions, import and export capabilities for whole building Life Cycle Assessment reports, customizable internal analysis dashboards, and the creation of an anonymized public dataset for benchmarking. The platform must support five distinct user types, including submitters, project teams, owners, reviewers, and the general public, while adhering to WCAG 2.1 Level AA accessibility standards. The contract runs from the date of award until September 30, 2028, with an option to extend for up to three additional one-year periods. Selection will be based on the highest combined rating of technical merit, weighted at 70%, and price, weighted at 30%, provided the offer meets all mandatory criteria and achieves a minimum technical score of 60 points. Strict security and data residency requirements are in place, mandating that all data, backups, and administrative files be hosted entirely within Canada and comply with Protected A information standards. Additionally, the contractor must maintain SOC 2 Type 2 compliance, utilize TLS 1.2 or higher for encryption, and ensure that government data is not used to train artificial intelligence models. All deliverables, including training and support, must be provided in both English and French.

Computer Systems Design Services

POSTED

DEADLINE

Roof Replacement Building M-20

Solicitation # 26-58140

POSTED

DEADLINE

Customized and applied Goods Manufacturing Practices (GMP) -Compliance Biomanufacturing Operational Training

Solicitation # 26-58172

The National Research Council of Canada (NRC) is seeking a provider for customized and advanced Good Manufacturing Practices (GMP) compliant biomanufacturing operational training for the Clinical Trial Material Facility (CTMF). This procurement, identified by solicitation number 26-58172, requires the delivery of two 3-day training cohorts for 16 to 20 participants. The training must be conducted in person at a GMP-compliant clean room facility in the Montreal, QC area and focus on the production of monoclonal antibodies and other biotherapeutics. The curriculum must be developed using materials and simulation-based learning methodologies from the National Institute for Bioprocessing Research and Training (NIBRT), specifically targeting staff in upstream processing (USP), downstream processing (DSP), and other GMP-facing operational roles. The selected provider must offer hands-on instruction using pilot-scale equipment, including bioreactor operations, chromatography systems, and tangential flow filtration (TFF) systems. Key requirements include the provision of two qualified trainers with at least five years of experience in GMP-compliant biopharmaceutical operational training and direct industrial experience. Deliverables, which include attendance tracking, post-training feedback summaries, and certificates of completion, must be received by December 31, 2026. While CASTL Canada Inc. has been pre-identified as a potential supplier due to intellectual property and licensing restrictions, other qualified suppliers were invited to submit statements of capabilities by October 9, 2026.

Professional and Management Development Training

POSTED

DEADLINE

South Campus Watermain Replacement

Solicitation # 26-58080

The National Research Council of Canada is soliciting bids for the South Campus Watermain Replacement project, identified as solicitation 26-58080 and project 6845. The scope of work involves the replacement and rehabilitation of the main water pipeline at the 1200 Montreal Road campus in Ottawa, Ontario. The project requires the contractor to provide all labor, materials, testing, and documentation necessary for full system operation, including civil, mechanical, and structural works. Key technical requirements include adherence to the National Building Code of Canada 2020, National Plumbing Code of Canada 2020, and City of Ottawa/AWWA C651 standards for connections and disinfection. The project also includes landscaping requirements and the use of accredited laboratories for soil and water quality testing. The procurement process utilizes a two-envelope submission system with a closing date of August 25, 2026, though subsequent addenda extended certain deadlines to September 8 and 15, 2026. Bidders must comply with stringent security clearance requirements and provide a mandatory Indigenous Participation Plan committing to a 5% procurement target. Evaluation of performance is based on a 100-point scale covering quality of workmanship, project management, health and safety, and contract management. The contract is governed by Canadian General and Supplementary Conditions, including specific clauses for asphalt cement price adjustments and greenhouse gas emission reduction targets. Payment is managed under the Federal Prompt Payment for Construction Work Act, requiring payment within 28 days of a proper invoice.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

High Capacity Load Cell

Solicitation # 26-58130

The National Research Council Canada is soliciting offers for the acquisition of a high-capacity, low-profile tension and compression load cell for use in a structures laboratory. The equipment will serve as a replacement component for large-scale testing of materials, assemblies, and components and must be a ready-to-integrate solution compatible with an existing MTS 201.90 servo-hydraulic actuator. Technical requirements specify a maximum height of 10.5 inches and hub and base threads of 4-8 UN 3B with a minimum depth of 4.25 inches. Deliverables include the load cell, connector protectors for each connector, and calibration documentation featuring a minimum 5-point tension and compression calibration for each bridge. This solicitation is open exclusively to Canadian suppliers under the Policy on Reciprocal Procurement. The contract will be awarded to the lowest evaluated price among offers that meet all mandatory technical criteria. Proposals must be submitted electronically in three separate sections: technical, financial, and administrative forms. The required delivery date is December 1, 2026, with a maximum lead time of 13 weeks from the date of contract award. Shipping is designated as DAP Delivered At Place to the National Capital Region. The contract period extends through December 31, 2026, and is managed by contracting authority Tyler Hanel.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Air Bath for Standard Resistors

Solicitation # 26-58104/A

The National Research Council Canada is soliciting proposals for the procurement of an air bath for standard resistors to replace an existing oil bath system. This equipment is required to provide a clean, stable, and dry temperature-controlled environment for precision resistance standards used in thermometry applications, specifically requiring the capacity to accommodate at least three resistors similar to the Measurements International Model 9331R. The contract is limited to Canadian suppliers under the Policy on Reciprocal Procurement. The successful bidder will be selected based on the lowest evaluated price among those who meet all mandatory technical criteria, which include a temperature stability and uniformity of at least plus or minus 10 mK over 24 hours at an ambient temperature of 23 degrees Celsius plus or minus 2 degrees Celsius. The equipment must be new and possess valid Canadian electrical safety certification, such as CSA approval or recognized equivalents like cUL or cETL, as CE marking alone is insufficient. Deliverables must be received by February 1, 2027, with delivery terms specified as Delivery at Place (DAP) Ottawa, Ontario. The contract includes a one-year warranty period following delivery and acceptance, covering product support and hardware maintenance. Proposals must be submitted in three separate sections—technical, financial, and administrative—by September 28, 2026, ensuring that no financial information is included in the technical submission to avoid disqualification.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Isothermal Calorimeter

Solicitation # 26-58132

The National Research Council Canada is soliciting offers for the procurement of a high-precision isothermal battery calorimeter system, which must include cyclers and an integrated heat-flow and temperature monitoring system. The system is required to support pouch, prismatic, and cylindrical cells with a temperature operating range from -30°C to 80°C, a minimum detection limit of 5 mW, and a maximum power compensation capacity of at least 100 W. The equipment must be delivered to Ottawa, Ontario, under DAP Incoterms, with all deliverables received by December 15, 2026, and the system fully installed, commissioned, and operational by March 31, 2027. The contract will be awarded to the responsive bidder offering the lowest evaluated price among those who meet all mandatory technical criteria. Proposals must be submitted as two separate electronic attachments, consisting of a technical offer and a financial offer, with a strict prohibition against including financial information in the technical volume. The procurement process includes specific requirements for environmentally preferable packaging and adherence to Canada's Code of Conduct for Procurement. Technical evaluation is conducted on a pass/fail basis, and the successful contractor will be responsible for meeting specified insurance and security requirements.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

IM/IT Research and Advisory Services

Solicitation # 25-58314

The National Research Council of Canada is seeking Tier 1 Executive level IM/IT Research and Advisory Services to support the Chief Information Officer Branch. The goal of this solicitation is to provide IT executives, managers, and technical staff with the necessary tools and insights to make strategic and operational decisions based on current industry trends. This will be delivered through an electronic self-service platform offering a wide range of resources, including white papers, blueprints, reports, and strategic planning guides, combined with contractor guidance to implement industry best practices. This opportunity, identified by solicitation number 25-58314, is restricted to Supply Arrangement Holders under EN578 – 260567. Interested parties must submit their responses by the deadline of October 14, 2026. The contract is managed by the Government of Canada and the primary point of contact for this requirement is Shufang Weng.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

CNC Software and Documentation SupplyThis subcontract, titled CNC Software and Documentation Supply, is issued by the National Research Council of Canada to provide essential operating software and technical documentation for prime contractors working on equipment projects. The scope of work includes the delivery of CNC control software licenses, operating manuals, maintenance guides, and technical specifications specifically compatible with lathe hardware. The contract requires the delivery of installed software licenses and a comprehensive set of technical documentation. Performance will take place within the National Capital Region of Canada. The solicitation was posted on September 22, 2026, with a response deadline of September 28, 2026, falling under NAICS code 513210.

Software Publishers

POSTED

DEADLINE

Installation, Commissioning, and Training ServicesThis subcontract for Installation, Commissioning, and Training Services supports prime contractors on machinery projects for the National Research Council Canada. The scope of work involves the physical installation of equipment, including unloading, positioning, leveling, and the connection of electrical and mechanical systems. The service provider is responsible for calibrating the CNC system and delivering a fully operational, commissioned system to the client. In addition to technical setup, the contractor must provide comprehensive operation and maintenance training to NRC staff using specialized rigging equipment and calibration tools. The project is located within the National Capital Region of Canada, with a response deadline of September 28, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS