Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

University of Alberta - Advanced Contract Award Notice / Notice of Proposed Procurement - SIHIdry Vacuum pump model CD S460

Active

AB-2026-06506International

Response Deadline10/02/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The University of Alberta is issuing a pre-solicitation notice for the procurement of SIHIdry Vacuum pump model CD S460 to be used by the Trades and Infrastructure Maintenance department. This purchase is intended to ensure compatibility with existing equipment and to maintain specialized goods that require manufacturer-specific upkeep. TDH Fluid System Inc. has been identified as the sole authorized distributor for SIHI gas products within Alberta and Saskatchewan. The solicitation, numbered AB-2026-06506, was posted on September 24, 2026, with a response deadline of October 2, 2026.

General Info

University of Alberta procuring SIHIdry Vacuum pump CD S460 from TDH Fluid System Inc.

Agency

University of Alberta

NAICS

333912 - Air and Gas Compressor Manufacturing

Place of Performance

AB, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation

PostedSep 24

Presolicitation

Response DeadlineOct 2

Submission deadline

Response Deadline

10/02/2026, 08:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyUniversity of Alberta

Contacts1 person available

OfficeN/A

Organization / AgencyUniversity of Alberta

Office AddressN/A

Contacts

Rashmi SharmaSupply Consultant

contact@example.gov

Full Description

Show more

In order to ensure compatibility with existing goods and to maintain specialized goods that must be maintained by the manufacturer, Trades and Infrastructure Maintenance department is requesting to purchase SIHIdry Vacuum pump model CD S460 from the same supplier. Moreover, TDH Fluid System Inc. is the sole and authorized distributor for the SIHI gas product in Alberta and Saskatchewan.

Similar Contracts

Same NAICS industry code

Supply of Intake Air Cleaner Filter Elements (NSN 4310-01-523-6643)This subcontract involves the supply of intake air cleaner filter elements for prime contractors under DLA Land and Maritime supply contracts. The contractor is responsible for manufacturing or sourcing elements according to NSN 4310-01-523-6643 and DLA Master List RA001, with a total delivery requirement of 9 packaged and marked units. The agreement mandates strict adherence to MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking. Additionally, the contractor must comply with the Buy American and Balance of Payments Program. The performance of this contract is centered in Tracy, California, under the oversight of the Department of Defense Maritime Supply Chain.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Supplier of Compressor Parts Kits (NSN 4310-00-366-8639)This subcontract opportunity is for the supply of 12 compressor parts kits identified by NSN 4310-00-366-8639 to support prime contractors delivering DLA Land and Maritime supply contracts. The selected supplier must ensure all kits are packaged according to RP001 DLA Packaging Requirements and marked in accordance with MIL-STD-129. Delivery is required FOB Destination, and the provider must strictly adhere to DFARS 252.225-7001 Buy American standards. The contract is issued by the Department of Defense under the Maritime Supply Chain agency and is designated as a Total Small Business Set-Aside. It falls under NAICS code 333912, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 5, 2026.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Compressor Plate Assembly (NSN 4310014071865) SupplierThis subcontract involves the manufacture and supply of 167 compressor plate assemblies under NSN 4310014071865 for the Department of Defense Maritime Supply Chain. The supplier is responsible for producing or sourcing the assemblies according to a specific technical data package, utilizing precision machining equipment and adhering to all DLA packaging and marking standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333912, with the place of performance located in San Diego, California. Interested parties must respond by October 5, 2026, to support prime contractors in fulfilling these DLA supply requirements.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-378X

This contract, identified as SPE7M1-26-T-378X, is a solicitation by the Department of Defense Maritime Supply Chain for the procurement of 12 units of a breather, identified by NSN 4310-01-606-7614 and RIX Industries part number 77-94. The agreement specifies a delivery timeframe of 168 days after the order, with a required delivery date of March 10, 2027. Shipping is set as FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction is included, prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions such as batteries or sensors as specified by NAVSEA. Inspection and acceptance of the supplies will occur at the destination point.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

REPAIR KIT, COMPRESSOR

Solicitation # SPE7M1-26-T-376N

This contract is a solicitation for one compressor repair kit, identified by NSN 4310-01-509-4708 and part number 204-35413 from Rix Industries. The procurement is issued by the Department of Defense Maritime Supply Chain and is designated as a total small business set-aside under NAICS code 333912. Delivery is required within 168 days after the order, with a final required delivery date of October 27, 2027, shipped FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a critical application designation and a prohibition on the intentional use of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Inspection and acceptance will take place at the destination.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

PARTS KIT, COMPRESSOR

Solicitation # SPE7M1-26-T-372Z

Solicitation SPE7M1-26-T-372Z, issued by DLA Land and Maritime, is for the procurement of 60 compressor parts kits designated for 1/2 and 3/4 HP dual units, identified by NSN 4310-01-146-5919. The requirement is for a critical application item, specifically Altec Air, LLC part number P3865. The contract specifies a delivery period of 168 days, with an original required delivery date of February 12, 2027, and a need ship date of March 23, 2027. Delivery is FOB Origin, with the destination for both inspection and acceptance being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is governed by NAICS code 333912 and requires adherence to several technical and quality standards. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. The DLA Master List of Technical and Quality Requirements, including RA001, takes precedence over ASTM standards. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, and mandates compliance with hazardous material labeling under the Hazard Communication Standard.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

VACUUM PUMP UNIT, ROTAR

Solicitation # SPE7M1-26-T-377T

Solicitation SPE7M1-26-T-377T is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of five rotary vacuum pump units under NSN 4310016034720. Approved sources for the required part number G5TWIN include Tequipment Inc, Supply House LLC, and Appion Industries Inc. The procurement is categorized under NAICS 333912 and requires submission of quotes via the DIBBS system. The contract specifies a delivery window with an original required date of January 4, 2027, and a need ship date of March 23, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates several federal regulations, including the Buy American and Balance of Payments program, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Compliance with the Hazard Communication Standard for any hazardous materials is mandatory.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

PLATE, COMPRESSOR

Solicitation # SPE7M1-26-T-375D

Solicitation SPE7M1-26-T-375D is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of 167 compressor plate assemblies, identified by NSN 4310014071865. This is a total small business set-aside under NAICS 333912. The required plates must be constructed from titanium and include installed NBR gaskets, adhering to hex model number UX-056-UJ-031 and pierce number 1234. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. Delivery is required by March 19, 2027, with a need ship date of March 23, 2027, and is designated as FOB Origin. Inspection and acceptance will occur at the destination, specifically DLA Distribution San Diego. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Additionally, the contractor must meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and utilize the Wide Area WorkFlow (WAWF) system for invoicing. All quotes must be submitted via the DIBBS portal.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-373Q

This contract is a solicitation for the procurement of 48 piston rings under NSN 4310-01-324-4319, identified as a critical application item. The items must be manufactured and tested according to source-controlled drawing 23008234, with approved sources including Rolls-Royce Corporation and Sargent Aerospace and Defense. Because this is a source-controlled item, only vendors with access to the limited rights data or those who can provide traceability to approved sources are eligible to quote. The delivery is set for 522 days after order, with a required delivery date of June 19, 2028, shipping FOB Origin to DLA Distribution San Diego. Quality assurance follows MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must comply with ASTM D3951 and MIL-STD-129. Additionally, the contract strictly prohibits the use of Class I ozone-depleting chemicals in the production of these items.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

CYLINDER, RECIPROCATING

Solicitation # SPE7M1-26-T-373P

Solicitation SPE7M1-26-T-373P is a Request for Quotations issued by the DLA Land and Maritime Maritime Supply Chain for the procurement of two reciprocating compressor cylinders, identified by NSN 4310-01-314-9171. The requirement is classified under NAICS 333912, and the items are designated as critical application items. The delivery period is set at 168 days after the award, with a need ship date of March 23, 2027, and an original required delivery date of April 30, 2027. Delivery is FOB Origin, and the shipping destination is DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List, and there is a specific prohibition against the intentional use of mercury or mercury-containing compounds. Additionally, additive manufacturing is prohibited unless specifically authorized. Inspection and acceptance will occur at the destination per FAR 52.246-2. Offerors must submit quotes via the DIBBS system and comply with the Buy American Act and DFARS 252.225-7001 for materials exceeding the micro-purchase threshold. Payment will be processed electronically through the Wide Area Workflow system.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

CYLINDER SLEEVE

Solicitation # SPE7M1-26-T-379K

The Department of Defense, through DLA Land and Maritime, is seeking quotes for the procurement of two cylinder sleeves under National Stock Number 4310123318495. This request for quotation, identified by solicitation number SPE7M126T379K, specifies an approved source of 1KWT0 061 825 and requires delivery to DLA Distribution within 168 days after receipt of the order. Interested and responsible sources must submit their quotes electronically by the deadline of October 5, 2026. The procurement falls under NAICS code 333912 and is managed by the office located in Columbus, Ohio. No hard copies of the solicitation or technical drawings are available, and all inquiries should be directed to the buyer via the DLA Dibbs portal.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

CYLINDER HEAD, COMPRESS

Solicitation # SPE7M1-26-T-375H

Solicitation SPE7M1-26-T-375H is a fixed-price request for quotation issued by DLA Land and Maritime for the procurement of three compressor cylinder heads, identified by NSN 4310-01-365-2608. This procurement is designated as a total small business set-aside under NAICS 333912. The required delivery period is 168 days after award, with shipments delivered FOB Origin to DLA Distribution San Diego. The item is classified as a critical application item, and the contractor must adhere to strict material restrictions, including the prohibition of intentionally added mercury and compliance with the Buy American Act and Berry Amendment. Technical and quality requirements are governed by the DLA Master List, and packaging must comply with MIL-STD-2073-1E and RP001 requirements, while marking must follow MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-2. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by October 5, 2026, and must be submitted to the Maritime Supply Chain office in Columbus, Ohio.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

More opportunities from University of Alberta

Same awarding agency

University of Alberta - Request for Proposal - Ice-Resurfacer

Solicitation # AB-2026-06509

The University of Alberta, through Campus Services and Campus and Community Recreation, is seeking proposals for the procurement of an ice resurfacer machine. This contract includes the supply of the equipment along with essential ancillary services, specifically delivery, setup, and training. Interested parties must submit their responses by October 8, 2026, at 8:00 PM. The solicitation, identified as AB-2026-06509, was posted on September 24, 2026, and is managed by Satinder Atwal, the Senior Supply Consultant. Performance of the contract will take place in Alberta.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

University of Alberta - Advanced Contract Award Notice / Notice of Proposed Procurement - SIHIdry CD S160 Systems for ESB

Solicitation # AB-2026-06505

The University of Alberta is issuing a pre-solicitation notice for the procurement of SIHIdry CD S160 systems for the ESB. This request is managed by the Trades and Infrastructure Maintenance department to ensure compatibility with existing equipment and to maintain specialized goods that require manufacturer-specific upkeep. TDH Fluid System Inc. has been identified as the sole authorized distributor for SIHI gas products within Alberta and Saskatchewan. The solicitation, numbered AB-2026-06505, was posted on September 24, 2026, with a response deadline of October 2, 2026. Rashmi Sharma serves as the primary point of contact for this procurement process.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

University of Alberta - Advanced Contract Award Notice / Notice of Proposed Procurement - LECO Pegasus BTX Mass Spectrometer with a Paradigm Shift GC×GC Modulator

Solicitation # AB-2026-06476

The University of Alberta is seeking a Competitive Bidding Exception to direct-award the procurement of a LECO Pegasus BTX Mass Spectrometer equipped with a Paradigm Shift GCxGC Modulator. This acquisition is intended to replace an aging LECO Pegasus IV system from 2009. The request for a direct award is based on the necessity of maintaining technical compatibility with the laboratory's current fleet of LECO BT and HRT+ systems. A critical driver for this specific procurement is the continued use of proprietary ChromaTOF software, which currently manages over 12 acquisition and more than 50 processing methods. This solicitation, identified as AB-2026-06476, was posted on September 23, 2026, with a response deadline of October 1, 2026.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

University of Alberta - Request for Proposal - RFP 2026-0112 Marketing, Communications and Web Development Services

Solicitation # AB-2026-06368

The University of Alberta, on behalf of the Faculty of Engineering, is seeking a qualified proponent for RFP 2026-0112 to provide marketing, communications, and web development services for the Alberta Create Centre. The project focuses on supporting two new initiatives: a sovereign and cybersecure certified compute environment for data-regulated industries and an incubator innovation program for early-stage entrepreneurs and startups. The selected provider will be responsible for four primary workstreams, including an integrated marketing strategy, brand identity development, the creation of three web surfaces, and comprehensive launch support. Interested parties must submit their responses by the deadline of October 2, 2026.

Advertising Agencies

POSTED

DEADLINE

University of Alberta - Request for Proposal - Vehicles

Solicitation # AB-2026-06325

The University of Alberta is seeking proposals for the supply of multiple vehicles to be integrated into the university's vehicle pool. This solicitation, identified as AB-2026-06325, is open for submissions until the response deadline of October 1, 2026, at 8:00 PM. The procurement process is being managed by Satinder Atwal, a Senior Supply Consultant, and the performance of the contract will take place within Alberta. Interested parties can find further details and submit their proposals through the official Alberta purchasing portal.

Automobile and Other Motor Vehicle Merchant Wholesalers

POSTED

DEADLINE

University of Alberta - Request for Proposal - Arc Flash Studies Heating Plant, Central Cooling Plant and Cooling Plant on Campus

Solicitation # AB-2026-06308

The University of Alberta is seeking proposals from experienced Industrial and Utility Engineering Consultants to conduct Arc Flash Studies for three specific facilities: the Heating Plant, the Central Cooling Plant, and the Cooling Plant on campus. These plants are integrated into the university's 14.4 kV electrical distribution system and include a wide range of equipment operating at various voltage levels, including 14.4 kV, 4.16 kV, 600 V, 208 V, 120 V, and battery banks exceeding 150 VDC. Interested proponents must submit their responses electronically through the designated public portal website by the deadline of October 1, 2026. This solicitation, identified by number AB-2026-06308, is managed by the University of Alberta with Joshua Cunningham serving as the primary point of contact.

Engineering Services

POSTED

DEADLINE

University of Alberta - Request for Proposal - Point-of-Care Ultrasound Devices, Eight (8)

Solicitation # AB-2026-06270

The University of Alberta, specifically the Faculty of Medicine and Dentistry's Department of Undergrad Medical Education, is seeking proposals for the supply and installation of eight Point-of-Care Ultrasound Devices. These devices are intended to support the training of undergraduate medical students by improving clinical decision-making through enhanced information gathering at the point of patient care. This solicitation, identified as AB-2026-06270, was posted on September 14, 2026, with a response deadline of October 9, 2026, at 8:00 PM. The project will be performed in Alberta, and interested parties can contact Senior Supply Consultant Satinder Atwal for further information.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

University of Alberta - Request for Proposal - CFI High-Performance Liquid Chromatography-Mass Spectrometer (HPLC-MS) and Ultra High Performance Liquid Chromatography (UHPLC) System

Solicitation # AB-2026-06236

The University of Alberta is seeking proposals for the supply, installation, and ongoing support of a High-Performance Liquid Chromatography-Mass Spectrometer (HPLC-MS) and Ultra High-Performance Liquid Chromatography (UHPLC) system. This equipment will be utilized by the Faculty of Science, Department of Chemistry, specifically within the Mass Spectrometry Facility to support various projects involving ESI-HRMS, LC-MS, and LC-MS/MS analyses. This solicitation, identified by number AB-2026-06236, was posted on September 11, 2026, with a response deadline of October 6, 2026. Interested parties should direct inquiries to the primary point of contact, Satinder Atwal, the Senior Supply Consultant.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS