This Solicitation opportunity from Nevada was posted on June 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

UNR - Construct ADA Door Openers at Argenta Hall and Dining Commons and William J. Raggio Building

Closed

ITB 9115State & Local

Submission Closed07/23/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290

New

ACT-1033-01 NAS Perimeter Door Replacement Bldg. 300 at the William J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city

This contract, solicitation number act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city, involves the provision and installation of two sets of interior commercial door assemblies at the NAS laboratory facility, Building 300, located within the William J. Hughes Technical Center at Atlantic City International Airport in New Jersey. The scope of work includes replacing existing door sets as well as performing necessary modifications, reframing, and finishing of the existing metal stud gypsum wall board door openings. The estimated magnitude of construction for this project is between 250,000 and 500,000 dollars. This opportunity is set aside for small businesses, including certified veteran-owned, service-disabled veteran-owned, women-owned, and HUBZone small businesses. Managed by PTSI Managed Services Inc., the solicitation was posted on October 29, 2026, with a response deadline of November 18, 2026.

PTSI Managed Services Inc.

POSTED

DEADLINE

Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)

Solicitation # Panic Hardware (Electrical Room Egress Doors)

Management & Training Corporation (MTC) is soliciting bids for the installation of commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The scope of work includes conducting site surveys to verify door dimensions and fire ratings, procuring Grade I heavy-duty panic bars, exterior trim, rim cylinders, strikes, and door closers, and performing installation and testing. All work must adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and ADA standards. To ensure fail-safe operation, contractors must perform at least 10 consecutive cycle tests on all installed hardware. This is a fee-for-service subcontracting opportunity open to small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities under NAICS code 238290. Bidders must be licensed in the State of Idaho and provide three references for similar projects. Required submission documents include a completed bid sheet with lump sum and individual deficiency pricing, a W-9, a self-certification form, and acceptance of terms and conditions. All bids must be submitted via email to Sandra Clore by December 1, 2026, at 3:00pm MST. The contract is subject to various federal regulations, including the Davis-Bacon Act for prevailing wage rates and fringe benefits, as well as FAR clauses regarding Buy American preferences and combating trafficking in persons. Contractors are required to comply with DOL records management, mandatory training, and privacy breach notification requirements. Payment will be issued upon the submission of invoices for materials and services that have been delivered and accepted by MTC. Final inspection and acceptance will occur at the MTC designated point of delivery.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

Kitchen Elevator Upgrade and Repair Service - NHSP-M

Solicitation # RFP NHDOC 2027-07

The New Hampshire Department of Corrections is soliciting proposals for a firm fixed price or not-to-exceed contract to provide comprehensive upgrades and repairs for a 1985 Dover Corporation passenger elevator at the New Hampshire State Prison for Men. The elevator, which serves two floors of the kitchen and has a 4,000-pound capacity, requires a new power unit including the motor, hydraulic valve, pump, oil reservoir, and muffler, as well as the installation of four security key switches and eight keys. All work must be performed by New Hampshire licensed professionals and comply with all local, state, and federal elevator codes, with final safety test results submitted to the New Hampshire Department of Labor. The project is expected to start in January, with a final completion deadline of June 30, 2027. Proposals are due by 2:00 PM EST on November 13, 2026, and must be submitted as separate sealed technical and cost proposals. Evaluation is based on a combined score of the technical proposal, which focuses on organizational experience, correctional facility expertise, and approach, and the cost proposal. Award selection may involve a Best and Final Offer process. Selected vendors must maintain significant insurance coverages, including commercial general liability of at least 1 million dollars per occurrence, and adhere to strict correctional facility security protocols, including tool inventories and compliance with PPD 371. Payment will be issued within 30 days of receiving approved monthly itemized invoices.

Department Of Corrections

POSTED

DEADLINE

Window Installation & Supply

POSTED

DEADLINE

Utility Duct Bank & Trenching

POSTED

DEADLINE

UIL Generator Replacement

Solicitation # 1305M327Q0009

Department Of Commerce Noaa

POSTED

DEADLINE

N099--JLM Roll Up Door Replacement

Solicitation # 36C25627Q0092

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

J039--561A4-25-500 Elevator Repair Building 6 and 53

Solicitation # 36C24226R0097

Solicitation 36C24226R0097 is a Request for Proposal issued by the Department of Veterans Affairs for the emergency upgrade and modernization of four elevators at the VA New Jersey Healthcare System Lyons Campus, specifically targeting one passenger elevator in Building 6 and one service and two passenger elevators in Building 53. The scope of work requires the contractor to provide all labor, materials, and supervision to install non-proprietary microprocessor-based control systems, new geared machines, car operating panels with braille markings, hall fixtures at ADA compliant heights, and complete shaft wiring. All work must adhere to current safety codes, including fire recall features and door lock monitoring, and comply with the Davis-Bacon Act for prevailing wage rates. This procurement is a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 238290. To be eligible, the prime contractor must be a licensed elevator maintenance company with a full-time mechanic on staff and a clean safety record, certifying no more than three serious, one repeat, or one willful OSHA or EPA violation in the last three years. Proposals are evaluated based on technical capability, past performance, and price, with a requirement to submit a current Experience Modification Rate (EMR) and certifications for the Buy American Act and limitations on subcontracting. Following several extensions to accommodate requests for information, the final deadline for proposal submission is 1:00 PM on Thursday, October 29, 2026.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

Playground Equipment InstallationThis subcontract involves the supply and installation of playground and sport equipment for prime contractors working on City of Tustin public works projects. The scope of work specifically includes the installation of units such as the Goblin's Climbing and Play Planetarium, encompassing the construction of foundations and the application of safety labels. All delivered playground structures must be provided with a manufacturer warranty. The project is categorized under NAICS code 238290 and is managed by the Public Works agency in California. Interested parties must submit their responses by the deadline of December 10, 2026. Further details regarding this opportunity can be accessed through the official procurement portal.

POSTED

DEADLINE

Outdoor Fitness Equipment InstallationThis subcontract opportunity involves the supply and installation of outdoor fitness equipment for prime contractors working on public works projects for the City of Tustin. The scope of work includes the installation of fitness pods and the necessary coordination of foundations and anchors to ensure proper placement and stability. To maintain warranty standards, the project requires the use of manufacturer-certified installers. The final deliverable is the provision of fully completed and warranted fitness equipment. Interested parties must respond by December 10, 2026.

POSTED

DEADLINE

Overhead Door Maintenance and Repair ServicesThe Overhead Door Maintenance and Repair Services subcontract involves providing semi-annual preventative maintenance and on-call repair services for Maryland State Highway Administration facility projects. The scope of work includes executing 20-point inspections, adjusting spring tension and door alignment, and lubricating rollers and bearings to ensure doors remain fully operational. All services must be performed by technicians with at least two years of professional experience and must strictly adhere to MOSH and OSHA safety regulations. The contractor is responsible for delivering maintained operational doors and detailed inspection reports. This opportunity is categorized under NAICS code 238290 and was posted on October 28, 2026, with a response deadline of November 18, 2026.

State Highway Administration

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0463

Solicitation SPE8E6-27-T-0463 is a small business set-aside request for quotation issued by the Defense Logistics Agency Troop Support, Construction and Equipment office. The contract is for the procurement of one unit of thermal insulation pipe fitting and sleeving, identified by NSN 5640-01-146-1898. The required delivery date is March 27, 2026, with a delivery timeframe of five days after receipt of order. The items are to be delivered FOB Origin to the Anniston Army Depot in Alabama, with inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and technical standards, including ISO 9001:2015 and DLA master list requirements such as RP001 for packaging and RQ032 for export control of technical data. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129. Invoicing and payment processing are required through the Wide Area WorkFlow system. Additionally, the contract incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and cyber incident reporting.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 11 days

AI Contract Overview

BCN Purchasing requires all responses to this solicitation to be submitted electronically through the NGEM system, with no physical documents accepted under any circumstances. Bidders are encouraged to use the system’s save-and-return functionality to build submissions in advance and avoid last-minute technical issues. The solicitation, identified as ITB 9115, pertains to the installation of ADA-compliant door operators and buttons at two multi-story University of Nevada, Reno buildings—Argenta Hall and the William J. Raggio Building. Work includes replacing double doors with sliding doors, installing a card reader at Argenta Hall, and performing selective demolition and refinishing of two restrooms in Raggio to ensure accessible entry. The project is assigned UNR Project #25MNC03160, Labor Commissioner #WA-2026-439, and SPWD Project #26-B036 for Argenta and #26-B040 for Raggio. The estimated cost range is $53,398 to $153,398, with liquidated damages of $500 per day for delays in completion. The required insurance coverage includes Commercial General Liability, Business Automobile Liability, Workers’ Compensation, and an Installation Floater, with specific limits outlined in the Owner-Contractor Construction Agreement template. Argenta Hall construction is restricted to a fixed window from December 17, 2026, to January 18, 2027, while work at Raggio must begin as soon as possible, with overall project completion mandated by January 18, 2027, subject to owner approval of schedule changes. Proposals are due by July 23, 2026, and bidders will be posted publicly after the bid opening.

General Info

Bid for ADA door upgrades at two UNR buildings due July 23, 2026, via NGEM, cost $53K–$153K, completion by Jan 18, 2027.

Agency

Nevada Government Marketplace

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

NV, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJun 25

Solicitation

Response DeadlineJul 23

Deadline has passed

Submission Closed

07/23/2026, 10:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNevada Government Marketplace

Contacts1 person available

OfficeNV, USA

Organization / AgencyNevada Government Marketplace

Office AddressNV, USA

Contacts

Jamie Serrao

contact@example.gov

+1 (555) 000-0000

Full Description

BCN Purchasing does not accept physical documents in response to any solicitation including but not limited to: ITB, RFP, RFQ, or CMAR solicitations. All documents must be submitted electronically via this website. The NGEM system allows for bidders to start and save work/uploads without submitting. Please make use of this capability to begin building your bid early and reduce the chances of internet connectivity or upload issues causing a last-minute inability to submit. Once the ITB/RFP/RFQ/CMAR closes and the responses are unsealed electronically, the list of bidders/responders will be posted online shortly thereafter and available to the public for viewing. This document can be accessed by clicking on Closed Bid Opportunities, selecting the specific opportunity, and scrolling down to Bid Documents. The Bid Tabulation document will be available for review there. Description of Work: Install ADA door operators and buttons at two 5+ story UNR buildings—Argenta Hall and Raggio. Scope includes replacing double doors with sliding doors, adding a card reader at Argenta, and selective demolition and refinishing of two Raggio restrooms for accessible entry. UNR Project#: # 25MNC03160 Labor Commissioner #: WA-2026-439 SPWD Project #: 26-B036 (Argenta) and 26-B040 (William J. Raggio) Estimated Cost Range: $53,398 to $153,398 Liquidated Damages: $500 per day Required Insurance if Awarded: Commercial General Liability, Business Automobile Liability, Workers' Compensation, and an Installation Floater will be required. Please refer to the TEMPLATE-Owner-Contractor Construction Agreement on the Attachments tab for limits and additional information and in compliance with the requirements set forth here: https://www.unr.edu/bcn-nshe/risk/contracts. Special Considerations: Over 3 stories. Argenta Hall: CONSTRUCTION TO OCCUR FROM 12/17/2026 THROUGH 01/18/2027 ONLY. William J. Raggio: CONSTRUCTION TO START AS SOON AS POSSIBLE. Completion of Work: Subject to change by Owner, Work is scheduled to begin on "November 2, 2026" and shall be fully complete by "January 18, 2027."