Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on April 11, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

US Navy Virginia Class Submarine EDG Global Repair Services

Closed
N64498-22-R-4054Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333618
New
DIBBS
ENGINE BLOCK ASSEMBLY,
Solicitation # SPE7L1-27-T-3005
Solicitation SPE7L1-27-T-3005 is a federal procurement issued by the DLA Weapons Support Land Supply Chain for four diesel engine block assemblies, specifically Cummins Inc. part numbers 3968733 or 396873300, under NSN 2815013308069. The requirement includes a special mandate for the removal of government identification from non-accepted supplies used in Cummins Diesel Engine Model C8.3. The original required delivery date is November 3, 2026, with a delivery window of five days after receipt of order. Shipping is designated as FOB Origin, with the final destination being the Saudi Arabian Army Ordnance Corps in Al Kharj, Saudi Arabia, via New York Forwarding Service Inc in Wilmington, North Carolina. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including specific requirements for arrow-up labels and mechanical handling notices. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Inspection and acceptance will occur at the point of origin per FAR 52.246-2. This procurement is a total small business set-aside under FAR 19.5 and requires all quotes to be submitted through the DLA Internet Bid Board System. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various DFARS cybersecurity and safeguarding regulations.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 10 days
NAICS: 333618
New
DIBBS
ENGINE BLOCK ASSEMBLY,
Solicitation # SPE7L1-27-T-3003
Solicitation SPE7L1-27-T-3003 is a request for quotations from the DLA Weapons Support Land Supply Chain for the procurement of four diesel engine block assemblies, specifically for use in Cummins Diesel Engine Model C8.3, identified by NSN 2815013308069 and part numbers 3968733 or 396873300. This is a Foreign Military Sales requirement for the Saudi Arabian Army Ordnance Corps, with an original required delivery date of November 3, 2026. Delivery is established as FOB Origin, with shipments routed through New York Forwarding Service Inc in Wilmington, North Carolina, for final delivery to the Al Kharj Depot in Saudi Arabia. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E, and requires compliance with RP001 packaging requirements to ensure the product is securely immobilized for the end user. Technical and quality requirements are governed by the DLA Master List, including specific instruction RQ011 regarding the removal of government identification from non-accepted supplies. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses covering cybersecurity, NIST SP 800-171 assessment requirements, and domestic sourcing restrictions such as the Berry Amendment and Buy American Act. This procurement is not a small business set-aside.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 10 days
NAICS: 333618
New
DIBBS
PUMP, COOLING SYSTEM, EN
Solicitation # SPE7L5-27-T-0438
Solicitation SPE7L5-27-T-0438 is a small business set-aside request for the procurement of 16 engine cooling system pumps, identified by NSN 2930226281225. The requirement specifies compatible part numbers from Overaasen AS (19564), AB Volvo Penta (22195450), and Mono Marine B.V. (22902431). The contract is managed by the DLA Weapons Support Land Supplier Operations Engines, with a required delivery date of April 14, 2027, and a delivery window of 155 days after receipt of order. Shipping is designated as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and the DLA Master List of Technical and Quality Requirements (RA001). Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses covering cybersecurity reporting, the Buy American Act, and prohibitions on certain telecommunications equipment. Offers produced via additive manufacturing are ineligible for award, and the government may apply a HUBZone price evaluation preference.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 12 hours ago

DEADLINE

in 10 days
NAICS: 333618
New
DIBBS
ENGINE BLOCK ASSEMBLY,
Solicitation # SPE7LX-27-U-0225
Solicitation SPE7LX-27-U-0225 is a total small business set-aside for the procurement of 26 diesel engine block assemblies (NSN 2815-01-532-3701) for the DLA Weapons Support Strategic Acq Program Directorate. The requirement is issued as a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000.00 dollars and a performance period of one year. Delivery is required within 99 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Technical compliance requires adherence to reference drawing NR 98752 000993-998 Revision B and quality systems complying with SAE AS9003 or ISO 9001. Strict packaging and marking standards are mandated per MIL-STD-2073-1E and MIL-STD-129, including individual packaging with moisture control and specific immobilization requirements. Due to the nature of the technical data, eligible offerors must possess an approved US/Canada Joint Certification Program certification and DLA authorization to access export-controlled data subject to ITAR or EAR. Additionally, contractors must comply with CMMC Level 2 requirements and various domestic sourcing restrictions, including the Buy American Act and the Berry Amendment. Payment shall be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 12 hours ago

DEADLINE

in 4 days
NAICS: 333618
New
DIBBS
ENGINE BLOCK ASSEMBLY,
Solicitation # SPE7L1-27-T-3004
Solicitation SPE7L1-27-T-3004 is a request for quotations from the DLA Weapons Support Land Supply Chain for the procurement of four diesel engine block assemblies, specifically for use in Cummins Diesel Engine Model C8.3, identified by NSN 2815-01-330-8069 and part numbers 3968733 or 396873300. The contract is a fixed-price acquisition with delivery required within five days after receipt of order, with an original required delivery date of November 3, 2026. Terms are FOB Origin, with inspection and acceptance also occurring at the origin. The items are destined for the Ministry of Defense and Aviation, Saudi Arabian Army Ordnance Corps, via the New York Forwarding Service Inc in Wilmington, North Carolina. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with specific requirements for palletization under RP001 and special marking code ZZ for mechanical handling. Technical and quality requirements are governed by the DLA Master List under RA001, and the contractor must comply with RQ011 regarding the removal of government identification from non-accepted supplies. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity and telecommunications restrictions. This procurement is not a small business set-aside.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 10 days
NAICS: 333618
New
DIBBS
ENGINE BLOCK ASSEMBLY,
Solicitation # SPE7L1-27-T-3002
Solicitation SPE7L1-27-T-3002 is a request for quotations from the DLA Weapons Support Land Supply Chain for four diesel engine block assemblies, specifically Cummins Diesel Engine Model C8.3, identified by NSN 2815-01-330-8069 and part numbers 3968733 or 396873300. This is a total small business set-aside under NAICS code 333618. The required delivery date is November 3, 2026, with a delivery timeframe of five days after receipt of order. While the solicitation mentions conflicting terms, it specifies that regular FOB Origin applies via FAR 52.247-29 as this is a Foreign Military Sales requirement for the Saudi Arabian Army Ordnance Corps. Shipments are to be routed through New York Forwarding Service Inc in Wilmington, North Carolina, for final delivery to the Al Kharj Depot in Saudi Arabia. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including specific requirements for palletization under RP001 and special marking code ZZ for mechanical handling. Inspection and acceptance will occur at the point of origin. Technical and quality requirements are governed by the DLA Master List via RA001, and the use of additive manufacturing is prohibited unless explicitly authorized. Administrative requirements include electronic invoicing through Wide Area Workflow and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and the prohibition of covered telecommunications equipment. Quotes must be submitted via the DIBBS portal.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 10 days

General Info

NAICS

333618 - Other Engine Equipment Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

1

CAT+Sub+EDG+Repair+Contract+SOW-+SS+Notice.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Philadelphia Division
Contacts2 people available
OfficePHILADELPHIA, PA, 19112-1403, USA
Office AddressPHILADELPHIA, PA, 19112-1403, USA

Full Description

Show more
Scope - The Naval Surface Warfare Center, Philadelphia Division (NSWCPD) is seeking sources to provide US Navy Virginia Class Submarine Emergency Diesel Generator (EDG) services to conduct shipboard and in-shop maintenance and repair efforts, and provide emergent technical support on EDG diesel engines and support systems. It is anticipated 4.80 man-years of technical support will be needed in the base year, 4.86 man-years for Year Two, 8.27 man-years for Year Three, 1.55 man-years for Year Four, and 4.83 man-years for Year Five. The total for all five years is 24.31 man-years. Incumbent - This work is not currently being performed under a NSWCPD contract at this time, but Caterpillar, Inc. (CAT) is considered the only company capable of providing these requested services. Contract Type - An Indefinite-Delivery, Indefinite-Quantity (IDIQ) Firm-Fixed Price (FFP) contract is anticipated. Period of Performance - The performance period will span five years. Performance is anticipated to begin around 12 May 2023. Personnel Security Clearance - All personnel performing under this order shall possess a CONFIDENTIAL level security clearance. Interim clearances are acceptable. Facility Requirements - Location - security clearance. Set-Aside/ Additional Sources - This sources sought is being issued for the purpose of identifying additional large businesses and small businesses with the required expertise that might be interested in responding to a formal solicitation. Interested businesses are invited to submit capability statements, not to exceed 5 double spaced, single-sided pages in length, describing their ability to fulfill this requirement. Capability Statements must include the following: (1) A complete description of the offeror's capabilities (including technical, program management, prototyping, etc.) related experience, facilities, techniques, or unique combination of factors that would directly relate to the Government's objectives as stated in the attached draft Statement of Work (SOW), (2) The qualifications, capabilities, and experiences of Contractor employees, who would be available to support this effort, (3) Demonstrated ability to obtain security clearances at the time of contract award for all personnel expected to provide support in accordance with the above requirement; (4) A summary of previous corporate experience relevant to the SOW obtained within at least the last five years together with applicable Government contract numbers and Government technical and contract points of contact with current telephone numbers; (5) A corporate roadmap on how labor categories not currently fulfilled by existing company personnel plan to be filled by the contract award date; (6) Any potential subcontracting arrangements being considered at this time. If subcontracting is contemplated, the capabilities statement shall contain sufficient information concerning the planned subcontracting arrangements to assure the Government that the limitations in FAR 52.219-14 can be met. These limitations require that at least 50% of the cost of contract performance incurred for personnel will be expended for employees of the prime contractor. Note: The requested information is for planning purposes and does not constitute a commitment, implied or otherwise, that a procurement action will be issued nor will the Government pay for the information solicited. All information and data received in response to this sources sought marked or designated a corporate proprietary information will be fully protected and held in strict confidence. Note: No telephone responses will be accepted. No contractor response received after the advertised due date and time will be accepted. No exceptions to this receipt deadline will be granted under any circumstances. Responses must be received no later than 12:00pm EST on 03 May 2022 by e-mail to contact@example.gov. Milestones - It is anticipated that procurement milestones will occur on or around the following dates: Set Aside Determination/Synopsis Issued: 21 July 2022 Solicitation Issued: 08 November 2022 Solicitation Closed: 18 December 2022 Award Date: 12 May 2023 Performance Start: 12 May 2023

More opportunities from Department Of Defense → Nswc Philadelphia Division

Same awarding agency

NAICS: 334513
New
Federal
512_LCS DAU Panels IDIQ_FY27
Solicitation # N6449826R0542
Solicitation N6449826R0542 is a Firm Fixed Price Indefinite Delivery/Indefinite Quantity (IDIQ) contract issued by the Naval Surface Warfare Center Philadelphia Division for the production of Data Acquisition Units (DAU) supporting the LCS Independence Advanced Engineering Control System. The contract features a five-year ordering period with an estimated total value of 50 million dollars and a minimum order of 500 dollars. The scope includes the production and delivery of shipboard DAUs, requiring strict adherence to military standards for shock tests, mechanical vibrations, electromagnetic interference, and environmental engineering. Award selection is based on a subjective tradeoff process prioritizing technical capabilities, past performance, and total evaluated price, with a mandatory acceptable rating for small business participation. Contractors must implement a comprehensive quality management system adhering to ISO 9001:2015 and provide numerous deliverables, including acceptance test plans, reports, certificates of compliance, and technical data packages. Rigorous packaging and marking requirements are mandated per ASTM-D-3951-18 and MIL-STD-2073-1 to ensure equipment protection during transit to the Philadelphia destination. Administrative requirements include electronic invoicing via Wide Area Workflow and mandatory security training for personnel. The solicitation has undergone amendments to extend the response deadline to November 13, 2026, and requires proposals to be submitted in five specific volumes via the PIEE Solicitation Module and SAM.gov.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS