USCG PBPL DRYDOCK REPAIRS WPB 87' AND WPB 110' IDIQ

The United States Coast Guard Surface Forces Logistics Center (SFLC) intends to issue a Commercial Request for Proposal (RFP) that will result in the award of an Indefinite Delivery/Indefinite Quantity (IDIQ) Firm-Fixed-Price Multiple Award Task Order Contract (MATOC), for Dry Dock Maintenance and Repairs on 87' and 110' Patrol Boats, in the four (4) Regions: West Coast (Continental US), West Coast (Hawaii), Northeast Coast, and Southeast Coast. The West Coast (Continental United States) Region will encompass the entire West Coast from Washington to California. The West Coast (Hawaii) Region will encompass the entire state of Hawaii. The Northeast Coast Region will encompass the states of Maine to North Carolina. The Southeast Coast Region will encompass all states from South Carolina to Texas to include the territory of Puerto Rico. The Government intends to award multiple awards. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Part 15, Contracting by Negotiation. This acquisition will be solicited in accordance with FAR Part 19.502-2 Total Small Business Set-Asides. This acquisition is limited to small businesses firms located within the regions; West Coast (Continental United States), West Coast (Hawaii), Northeast Coast, and Southeast Coast. The solicitation will be issued electronically, on or about April 15, 2013, via the Federal Business Opportunity web page at http://www.fbo.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for the RFP release and all subsequent amendments. Hard copies of the specification and solicitation will not be issued. The NAICS Code is 336611. GEOGRAPHIC RESTRICTION: Geographic restriction may be implemented at the Task Order level due to operational requirements and/or urgent repairs. Any geographic restrictions will be identified at the Task Order level and implemented accordingly. All work will be performed at the contractor's facility. The performance period for this requirement includes one base year and four option years. From date of contract award through one year for the base period, and additional one year periods for each option exercised. The Performance Period for each individual requirement will be designated on each Task Order. The scope of the acquisition for the WPB 87' and WPB 110' will include, but is not limited to: Perform Ultrasonic Thickness Measurements Tank(s), Clean and Inspect Tank(s), Potable Water, Clean and Inspect Tank(s), Preserve 100% Drydocking Emergency Drydocking Tank(s), Air Test Depth Sounder, Capastic Fairing, Renew Propulsion Shaft Strain (Strain Gage Alignment), Drydock, Measure Propulsion Shaft Strain (Strain Gage Alignment), Waterborn, Measure Main Engine(s)/Reduction Gear(s), Realign Propulsion Shaft(s), Remove, Inpsect and Reinstall Propulsion Shaft(s), Repair Propulsion Shaft(s), Straighten Propulsion Shaft(s), Renew Intermediate Water-Lubricated Propulsion Shaft Bearing(s), Renew Aft Water-Lubricated Propulsion Shaft Bearing(s), Renew Intermediate Bearing Carrier(s), Renew Aft Bearing Carrier(s), Renew Stern Tube(s), Interior Surfaces, Preserve 100% Stern Tube(s), Interior Surfaces, Repair Propeller(s), Remove, Inspect, and Reinstall Propeller(s), Minor Repair(s), Perform Propeller(s), Renew Fathometer Transducer, Renew (Drydock) Fathometer Transducer, Renew (Waterborn) Speed Log, Skin Valve Assembly, Clean and Inspect Rudder Assembly (or Assemblies), Remove, Inspect and Reinstall Rudder Assembly (or Assemblies), Renew RHIB Notch Skid Pad(s), Renew RHIB Notch Skid Pad Studs, Renew Stern Launch Door, Remove, Inspect and Reinstall Grey Water Piping, Clean and Flush Sewage Piping, Clean and Flush Grey Water Piping, Renew Sewage Piping, Renew Sea Water Piping, Renew Potable Water Piping, Renew Fuel Piping, Renew Hydraulic Lines, Renew Hydraulic Pump(s), Renew Potable Water Pump, Renew Pump(s), Miscellaneous, Renew Hull Plating (Side Scan), Underwater Body and Freeboard, Ultrasonic Testing U/W Body, Preserve ("100%") Hull Plating Freeboard, Preserve ("100%") Superstructure, Preserve ("100%") Mast, Preserve ("100%") - USCG Interference Removal Mast, Preserve ("100%") - Contractor Interference Removal Decks - Exterior (Main Deck), Preserve Bilge Surfaces (Engine Room), Preserve ("100%") Galley and Mess Deck, Preserve Bilges ("100%") and Renew Joiner Deck Forward Passageway, Preserve Bilges ("100%") and Renew Joiner Deck Lazarette, Preserve Bilges ("100%") Machinery Space(s), Preserve Bilges - Partial Non-Machinery Space(s), Preserve Bilges - Partial Forepeak Compartment, Preserve - 100% Forepeak Compartment, Preserve - Partial DC Locker Deck, Preserve Interior Deck Covering System(s), Reseal Interior Deck Covering System, Cosmetic Polymer Epoxy Resin/Epoxy Flake, Renew Interior Deck, Carpeting, Renew Ship's Office (1-10-0-Q), Deck Covering System, Renew Main Diesel Engine(s), Renew Ships Service Diesel Generator(s), Renew Window(s), Renew Door and/or Hatch Assembly (or Assemblies), Weather/Watertight, Renew Joiner Door(s), Renew HVAC System, Ducting, Clean Gaylord Hood System, Ducting, Clean Steel Hull/Structural, Crack, Weld Repair - 1 foot increment(s) Steel Hull/Structural, Eroded Weld Repair - 1 foot increment(s) Aluminum Plating/Structure, Crack, Weld Repair - 1 foot increment(s) Aluminum Plating/Structure, Eroded Weld Repair - 1 foot increment(s) Bulkhead/Sideshell Acoustic Insulation, Renew Bulkhead/Sideshell Thermal Insulation, Renew Overhead Acustic Insulation, Renew Overhead Thermal Insulation, Renew Steel Hull, Weld Repair, Overlay (Clad) - 4 sq in increment(s) Steel Plating/Framing, Renew Aluminum Plating/Framing, Renew Cathodic Protection/Zincs, Renew Anchor Windlass, Renew Auxiliary Foundation(s), Renew Auxiliary Foundation(s), Repair Engine Exhaust Hanger(s), Renew Engine Exhaust Blanket System(s), Renew Engine Exhaust Cooling Water Jacket(s), Renew Engine Exhaust Shielding, Renew Exhaust Concentric Ring(s), Main Diesel Engine (MDE), Renew Exhaust Concentric Ring(s), Ship's Service Diesel Generator (SSDG), Renew Aluminum Deck Plating/Grating, Renew Sea Water System Strainers and Piping, Clean and Inspect Sea Water Valve(s), Clean and Inspect Sea Water Valve(s), Renew Steering HPU System - Clean, Inspect, and Perform Maintenance Auxiliary HPU System - Clean, Inspect, and Perform Maintenance Ventilation System, Engine Room Supply and Exhaust Fan Assemblies, Clean and Inspect Ventilation System, Engine Room Supply and Exhaust Fan Assemblies, Clean and Inspect, Preserve Propulsion Shaft Fairing Plate(s) and Rope Guard(s), Renew Temporary Services, Provide Joiner Bulkhead Panels, Renew Galley Equipment, Renew HVAC System, Repair Stanchion(s) and/or Handrail(s), Renew Ladder(s), Renew Sounding Tube(s), Renew Tank Vent(s), Renew Main Deck Soft Patch Seal(s), Renew Interference(s), Removal and Reinstall Interior Furnishing(s), Locker(s), and/or Berth(s), Renew Data Services, Provide Forepeak, Modify (EC 087-A-33) Stern Light, Relocate (EC 087-B-041) Forward RHIB Notch Skid Pad, Install (EC 087-A-038) Weather Tight Door, Fuel Station, Install (TCTO TB6000) Hatch Cover(s) and Coaming(s), Renew (EC 087-A-027) Propulsion Shaft Guards, Fabricate and Install (TB1000) Battery Charger, Modify (TD8000.1) Ships Service Diesel Generators (SSDG), Idle Circuit, Install (TD 1000.0) Law Enforcement Strobe Light, Upgrade (EC 087-C-030) Fire Hose Rack "Camelbacks", Modify (TCTO TB3000) Handrails, Modify (TB3020) Install Stainless Steel Hull Inserts (TCTO TB1010 Interior Compartment(s), Preserve Hull Plating (Side Scan), Ultrasonic Testing Hull Plating, U/W Body, Inspect Hull Plating, Ultrasonic Testing Aluminum Hull and Structural Repairs - 1/4" Plate Aluminum Hull and Structural Repairs - 3/16" Plate Aluminum Hull and Structural Repairs - 5/16" Plate Hull and Structural Plating Repairs - Crack (Steel) Hull and Structural Plating Repairs - Eroded Weld (Aluminum) Steel Hull and Structural Plating Repairs (5-Pound) Steel Hull and Structural Plating Repairs (7.0 Pound, 7.5 Pound or 7.65 Pound) Steel Hull and Structural Plating Repairs, Corrugated Plate (4.0-Pound) Hull and Structural Plating Repairs (6.0-Pound or 5.63-Pound) Hull and Structural Plating - 10.0-Pound Steel, Repair Appendages (U/W), Leak Test Appendages (U/W) Internal, Preserve Voids (Non-Accessible), Leak Test Voids (Non-Accessible), Preserve Internal Surfaces Main Mast, Preserve, 100% (With ESD Support) Main Mast, Preserve, 100% (Without ESD Support) Main Diesel Engine, Renew ("A" & "B" Class) Main Diesel Engine, Renew ("C" Class) Main Reduction Gear Assembly, Renew ("A" & "B" Class) Main Reduction Gear Assembly, Renew ("C" Class) Main Reduction Gear Flexible Coupling, Renew ("A" & "B" Class) Main Reduction Gear Flexible Coupling, Renew ("C" Class) Exhaust System, MDE, Inspect ("A" & "B" Class) Exhaust System, MDE, Inspect ("C" Class) Propulsion Shafting, Remove, Inspect, and Reinstall Propulsion Shaft(s), Straighten Propulsion Shafting, Renew Propulsion System, Alignment Check Propulsion Shafting, Strain Gage Alignmnet Inspections Propulsion System, Full Alignment Mechanical Shaft Seal Assemblies, Overhaul Propulsion Shaft Bearings (External), Renew Propulsion Shaft, Stern Tube Forward Bearing, Renew Propulsion Shaft, Forward Bearing Housing, Renew Propulsion Shaft Strut(s), Renew Stern Tube(s) Interior Surfaces, Preserve 100% Stern Tube(s), Renew Propellers; Remove, Inspect, and Reinstall Propeller(s), Minor Repair(s), Perform Propeller(s), Renew Heat Exchangers; Clean and Inspect Ship Service Diesel Generator(s) (CAT), Renew Ship Service Diesel Generator(s), (CAT) Clean and Inspect Ship Service Diesel Generator(s) (John Deere), Renew Ship Service Diesel Generator(s) (John Deere), Clean and Inspect Fathometer Transducer, Renew Speed Doppler, Renew, Doppler Valve, Overhaul Sea Valve(s), Overhaul, Renew Sea Strainer(s) (All Sizes), Renew Sea Strainer(s) - Duplex (All Sizes), Overhaul Through-Deck Packing Gland(s), Renew Grey Water Piping, Renew Sewage Piping, Renew Oil Content Meter, Calibrate Hot Water-On-Demand Units, Renew Fuel Manifold Valves, Renew Fuel Valve Reach Rod Assemblies, Renew Steering Gear (General), Overhaul Rudder Assembly, Remove, Inspect and Reinstall Rudder Assembly (or Assemblies), Renew Rudder, Bearing Housing(s), Renew Fin Stabalizer(s) (General), Overhaul Towing Bitt(s), Chock(s), Kevel(s) and Fair Lead(s), Renew Electr Hydraulic Crane, Renew Single Point Davit (Appleton SEB) Level 2 Inspection and Repairs Grey Water Piping, Clean and Flush Sewage Piping, Clean and Flush Joiner Bulkhead Panel(s), Renew Forward Peak Compartment, Preserve Forward Head, Preserve Forward Berthing, Preserve CPO Head, Preserve CPO Stateroom, Preserve Aft Berthing Head, Preserve Aft Berthing, Preserve Furniture, Racks and Lockers, Renew Battery Space, Preserve and Insulate Aft Steering Compartment, Preserve and Insulate Pilothouse Deck (Aluminum), Renew and Inspect Forward Void, Preserve Forward Sound Locker, Preserve Aft Sound Locker, Preserve Strut Cofferdam(s), Preserve Tanks (MP Fuel Service, Stowage, and Overflow). Clean and Inspect Tanks, Air Test Tanks (Potable Water), Clean and Inspect Tanks, (Grey Water) Clean and Inspect Tanks (Sewage Holding) Clean and Inspect Tanks (Dirty Oil and Waste), Clean and Inspect Tank (Sewage Holding), Preserve "100%" Tank (Sewage Holding), Preserve "Partial" Tank(s) (Aft Grey Water), Preserve "100%" Tank(s) (Aft Grey Water), Preserve "Partial" Tank (Dirty Oil), Preserve "100%" Tank (Dirty Oil), Preserve "Partial" Hull, Structural Closures, Renew Tank (Oily Water), Preserve "100%" Tank (Oily Water), Preserve "Partial" Tank(s) (Potable Water), Preserve "100%" Tank(s) (Potable Water), Preserve "Partial" Engine Room, Preserve 100% Bilge Surface(s), (Machinery Space), Preserve Partial U/W Body, Preserve "100%" U/W Body, Preserve ("100%") Used with Side Scan U/W Body, Preserve "Partial - Condition A" Hull Plating Freeboard, Preserve - "100%" Hull Plating Freeboard, Preserve "100%" Used with Side Scan Hull Plating Freeboard, Preserve - Partial Superstructure, Preserve "100%" Superstructure, Preserve "Partial" Cathodic Protection System (Bilge and Sea Chest), Renew Cathodic Protection System, Inspect and Maintain Impressed Current Cathodic Protection System, Inspect and Maintain Impressed Current Cathodic Protection System Reference Cell(s), Renew CAPAC Anode Assembly Renew Insulation, Bulkhead/Sideshell/Overhead, Renew Floating Deck System (Galley and Mess Deck), Renew Renew Floating Deck System in Aft Berthing Drydocking Temporary Services, Provide Data Service, Provide Sea Trial Performance, Provide Support Searchlight, Install New Law Enforcement Blue Light, Replace Oily Water Seperator Piping, Modify Main Diesel Engine Duplex Sea Strainers, Install Reverse Osmosis Watermaker, Replace MDE Seawater Recirculation Valves, Install Fire Suppression System, Upgrade Dishwasher, Upgrade Ventilation System(s), Commercial Cleaning Structural, Fire Hose Racks, Renew CCTV Security System, Install (EC-110-C-111) Install New Fire Alarm System (EC-110-C-137) Deck Covering (Interior Wet/Dry), Renew Deck Covering (Carpeting), Renew Deck Covering (Electrical Matting), Renew Deck Covering (Wet/Dry), Seal Anchor Windlass, Renew Decks - Exterior, Preserve ("Non-Skid Broadcast Grit" System) Decks - Exterior, Preserve ("Non-Skid Broadcast Grit" System) Partial Tank and Void Cover(s), Renew Sea Water Piping, Renew Seawater and A/C Piping, Clean and Inspect Potable Water Piping, Renew Fuel Piping, Renew Piping Insulation, Renew Bilge Piping, Renew Hydraulic Lines, Renew Ladder(s) and Stairwell(s), Renew Sounding Tube(s), Renew Interference(s), Remove and Reinstall Pyrotechnic Locker - Ready Use Locker(s) Renew Auxiliary Equipment Foundation(s), Renew Floor Plates, Machinery Space(s), Renew Window(s), Renew Floor Plate Grating, Gun Deck, Renew Gooseneck Vent(s), Renew Stanchion(s) and/or Handrail(s), Renew HVAC Air Handler(s), Renew Copper Tubing, Refrigerant, A/C System, Renew Depth Sounder, Capastic Fairing, Renew Engine Exhaust Blanket System(s), Renew Deck Covering System in Galley and Mess Deck, Renew A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests via e-mail to: contact@example.gov. The CD-ROM sets are available of all cutters and will be free of charge to contractors upon request. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). For further information or questions regarding this solicitation, please contact Susan Kreider at +1 (555) 000-0000, or by email at contact@example.gov.