USCG SECTOR NEW YORK – RENEW GALLEY STAFF LOCKER ROOMS SECNYHAB01

The U.S. Coast Guard Sector New York is soliciting contractor services for comprehensive repairs and renovations to the male and female staff locker rooms located at 216 Coast Guard Drive, Staten Island, NY 10305. The project includes floor tile replacement with industrial linoleum (minimum 2.5mm thickness) and 4-inch rubber cove base, installation of ten new lockers per room measuring 72”H x 15”W x 24”D, replacement of vanities, sinks, toilets, urinals, and bathroom stalls using HDPE materials, wall painting and patching, and installation of hardwood laminate stainless steel benches. All work must comply with current plumbing, building, and safety codes, as well as federal waste disposal regulations, and must be performed by licensed professionals, particularly for plumbing activities. Material submittals for tiles, paint, lockers, and fixtures are mandatory and require written approval from the Contracting Officer’s Representative prior to procurement. Performance is restricted to weekdays between 0700 and 1530, with any off-hour work requiring 48 hours prior approval, and all work must be completed within 30 days of contract award. Debris and waste must be removed daily, and all personnel must possess and carry a REAL ID while on site. The solicitation, numbered SECNYHAB01 and posted on May 5, 2026, with a response deadline of May 22, 2026, is issued under NAICS code 236220 for commercial and institutional building construction and carries no set-aside classification, making it open to all businesses regardless of size. The contract is administered by the U.S. Coast Guard through Base BOSTON (00024) in Boston, MA, with the COR located at the Staten Island site and reachable via Claire.V.Sullivan@uscg.mil. Prevailing wage rates under the Service Contract Act apply to all labor and must be adhered to throughout performance. No formal contract type, estimated value, or funding details like AAC, TAS, or ACRN are provided, and no specific payment office, invoicing method (e.g., WAWF), or shipping terms such as FOB are defined in the documentation. While the Statement of Work details technical requirements and performance standards, there is no formal Section I listing of FAR clauses, no Section J inventory of attachments beyond the referenced SOW, no