This Sources Sought opportunity from Department Of Homeland Security was posted on June 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

USCGC HAMMER (WLR-75405) DRYDOCK REPAIR FY27

Closed

70Z08526RIBCT25789Federal

Submission Closed07/11/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

DIBBS

PANEL, VEHICULAR OPERAT

Solicitation # SPE7M4-27-T-1904

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1892

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

WINDSHIELD WIPER ASSEM

Solicitation # SPE7M4-27-T-1887

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

USNS SALVOR (T-ARS 52) VOYAGE REPAIR AVAILABILITY (VRA)

Solicitation # N6264927QL003

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

TSV4 NARR MESSING AND MODERNIZATION

Solicitation # N0018927QL008

NAVSUP FLT LOG CTR Norfolk is soliciting a firm-fixed-price contract for the development of a drawing package and Bill of Materials (BOM) to support habitability upgrades for the TSV4 Narragansett. The scope of work focuses on the vessel's messing, berthing, stateroom, and sanitary spaces at Joint Expeditionary Base Little Creek-Fort Story in Virginia Beach, Virginia. This effort is strictly limited to assessment and documentation; it specifically excludes any procurement, fabrication, removal, or installation of shipboard components. The project is a total set-aside for small businesses, including service-disabled veteran-owned small businesses, under NAICS code 336611. Key deliverables include a draft drawing package and BOM due 40 calendar days after award, with the final delivery of two electronic files and two full-size paper copies in NAVSEA format due within 61 calendar days. Contractors must adhere to several technical standards, including MIL-STD-2003 for electric plants, MIL-STD-777 for piping, and General Specifications for Overhaul of Surface Ships. A mandatory ship check at Colonna's Shipyard in Norfolk is required for eligibility, and failure to attend will result in disqualification. Award will be based on the best value, evaluating the mandatory ship check on a pass/fail basis and the technical approach on an acceptable/unacceptable basis, with the final selection going to the lowest total evaluated price.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

BIG BLUE 3 MAC - N64498-26-Q-5284

Solicitation # N6449826Q5284

The BIG BLUE 3 MAC solicitation, identified by number N6449826Q5284, is issued by the Department of Defense through the Naval Surface Warfare Center Philadelphia Division. This procurement opportunity falls under NAICS code 336611 and is managed out of the agency's office located in Philadelphia, Pennsylvania. The solicitation was posted on October 27, 2026, with a response deadline set for November 2, 2026. Interested parties may coordinate with the primary point of contact, Anthony Ricciardi, for further inquiries regarding the requirements of this contract.

Nswc Philadelphia Division

POSTED

DEADLINE

CGC-HENRY-BLAKE-DRYDOCK-REPAIRS

Solicitation # CGC-HENRY-BLAKE-DRYDOCK-REPAIRS

POSTED

DEADLINE

Maintenance, Repair, and Preservation of YT-812

Solicitation # N4523A27Q1003

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

Solicitation # N6817127QN006

Solicitation N6817127QN006 is a request for a firm fixed price contract to perform voyage repairs for the USS RAFAEL PERALTA (DDG 115) in Mombasa, Kenya. The period of performance is scheduled from November 12, 2026, to November 19, 2026. The scope of work includes hull maintenance such as high-pressure washing and corrosion removal, systems repair involving the cleaning and inspection of refrigeration and air conditioning plant condensers, and general services including the provision of rigging, scaffolding, and furniture upholstery replacement. All work must adhere to NAVSEA Standard Items (FY27 CH-2) and specification package #NAPL-009-27, with safety standards governed by OSHA Part 1915 for shipyard employment. The contract will be awarded to the Lowest Priced Technically Acceptable offeror, with technical capabilities evaluated on an acceptable or unacceptable basis. Prospective contractors must be registered in the System for Award Management and submit quotes in English and US dollars by October 30, 2026. Required submission documentation includes Standard Forms 18 and 30, a completed price breakdown, and a signed non-disclosure agreement. Administration is managed by the Navsup Flc Sigonella Naples Office, with electronic invoicing processed through Wide Area WorkFlow. Key compliance requirements include the Defense Base Act for workers compensation and the submission of a detailed Test and Inspection Plan prior to the commencement of work.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

Solicitation # N0016727Q0001

POSTED

DEADLINE

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified marine contractor to perform a complete propulsion repower and helm system integration for a 30 foot Munson Packman landing craft. The project involves a six-phase process including the decommissioning and removal of two existing Honda BF250A outboard engines, a structural assessment of the transom, and the installation of two new Honda BF250D Drive-by-Wire outboards. Key technical requirements include the installation of new-generation Honda iST electronic control heads at primary and secondary helm stations, integration with the existing NMEA 2000 backbone and SeaStar PA1315-2 Power Assist Steering system, and a comprehensive fuel system upgrade using USCG Type A1-15 lines. The project concludes with static diagnostics and a minimum two-hour sea trial to validate performance and safety protocols. The Tribe will deliver the vessel to the contractor's facility, which must provide a secure, fenced yard or indoor shop. Proposals are due by November 13, 2026, and must be submitted in PDF format. Evaluation is based on a 100-point scale with significant preference given to Colville Business Enterprises and other Indian-owned businesses. Award criteria prioritize reliability and effectiveness over the lowest cost. Selected contractors must provide proof of Honda Marine Authorized Dealer status, maintain appropriate liability insurance, and agree to either a 25 percent retainage or a performance bond, with a bond being mandatory for contracts exceeding 100,000 dollars. All payments are subject to the Tribes appropriation process and availability of funds.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

Solicitation # SPE7M8-27-T-0462

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The U.S. Coast Guard, through the Surface Forces Logistics Center in Alameda, California, is issuing a Sources Sought Notice to identify capable contractors for drydock maintenance of the USCGC HAMMER (WLIC-75302) and its accompanying barge, with work scheduled for a 70-day period between January 6 and April 6, 2027. The requirement is scoped to include nearly 100 distinct work items covering hull plating inspection and renewal using various steel plate thicknesses, underwater appendage preservation and leak testing, propulsion shaft removal and reinstallation, rudder and propeller inspection and overhaul, tank cleaning and preservation for fuel and sewage systems, cathodic protection renewal with zinc anodes, deck and superstructure preservation with MIL-PRF-24667 non-skid system, and specialized vessel services such as sea trials, temporary utilities, and welding repairs. Work is to be performed entirely at the contractor’s facility, and the same comprehensive requirements extend to the barge, including spud winch overhaul, spud well preservation, pusher knee repair, door replacements, and engine system renewals. An independent NACE Level 3 inspector and tenting services are also required to ensure quality and environmental compliance. The North American Industry Classification System code is 336611 with a size standard of 1,300 employees, and no geographical restrictions apply. Contractors must register in the System for Award Management and are required to verify their business size classification, including 8(a), HUBZone, SDVOSB, VOSB, EDWOSB, WOSB, or small/large business status, with supporting documentation from the SBA or other relevant authorities. Respondents must submit a formal statement affirming their intent to submit a proposal if a solicitation follows and must provide past performance evidence demonstrating comparable experience on similar projects. The government will consider all received information for market research purposes only, and submission does not constitute a commitment to award a contract or entitle respondents to compensation, with responses due by 8:00 AM Pacific Time on July 11, 2026, to the designated points of contact.

General Info

Sources sought for drydock maintenance of USCGC HAMMER, 70-day work window, Jacksonville homeport.

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)

NAICS

336611 - Ship Building and Repairing

Place of Performance

CA, USA

Set-Aside

NONE

Documents

Sources Sought Notice for USCGC Hammer Drydock Repair FY27

sources-sought

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 11

Sources Sought

Response DeadlineJul 11

Deadline has passed

Submission Closed

07/11/2026, 03:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Contacts2 people available

OfficeALAMEDA, CA, 94501, USA

Organization / AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Office AddressALAMEDA, CA, 94501, USA

Contacts

Ou Saephanh

contact@example.gov

SANDRA MARTINEZ

contact@example.gov

Full Description

This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations.

The applicable NAICS Code is 336611, Ship Building and Repairing, and the size standard is 1,300 employees.

REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Forces Logistics Center, and Alameda, CA to identify sources capable of providing the following: Contractor shall provide all necessary labor, materials, services, equipment, supplies, power, accessories, special tools and such other things as are necessary to perform DRYDOCK maintenance to the U.S. Coast Guard Cutter, USCGC HAMMER (WLIC 75302) and it’s barge.

ANTICIPATED NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,300 employees.

GEOGRAPHICAL RESTRICTION:

N/A

PLACE OF PERFORMANCE: Contractor’s Facility

DESCRIPTION OF WORK:

This requirement is for the contractor to provide all necessary facilities, materials, equipment, personnel, and other such things necessary to perform Dry-dock repairs to the U.S. Coast Guard Cutter (USCGC) HAMMER (WLIC-75302) and its barge. This vessel’s homeport is 10426 Alta Drive Jacksonville, FL 32226. All work is to be performed at the Contractor’s facility. The required performance period is 70 days. The performance period is 06 January 2027 – 06 April 2027 to accommodate Coast Guard cutter operational needs.

Description: This Dry Dock will consist of approximately ninety-eight (98) work items, not limited to: hull plating ultrasonic testing, underwater body preserve, propeller removal and inspect, propulsion shaft remove, inspect and reinstall, rudders remove, inspect, reinstall and preserve, construction deck 100% preserve, tanks clean and inspect, and boat davit inspect.

ITEM

DESCRIPTION

D-001

Fire Prevention Requirements

D-002

Hull Plating, Side Scan, Ultrasonic Testing - Tender

D-003

U/W Body, Preserve, 100 percent - Tender

D-004

Hull Plating Freeboard, Preserve, Partial - Tender

D-005

Hull Plating Freeboard, Preserve, 100 Percent - Tender

D-006

Hull and Structural Plating, General, 10.2 lbs. Steel, Renew - Tender

D-007

Hull and Structural Plating, General, 12.75 lbs. Steel Plate, Renew - Tender

D-008

Hull and Structural Plating, General, 15.3 lbs. Steel Plate, Renew - Tender

D-009

Hull And Structural Plating, General, 20.4 lbs. Steel Plate, Renew - Tender

D-010

Hull and Structural Plating, General, 7.5 lbs., 3/16 in. Steel Plate, Renew - Tender

D-011

Hull and Structural Plating, General, 7.65 lbs. Steel Plate, Renew - Tender

D-012

Hull And Structural Plating, General, Cracked Steel Welds, Repairs - Tender

D-013

Hull and Structural Plating, General, Degraded Weld, Steel, Repair - Tender

D-014

Appendages, U/W, Leak Test - Tender

D-015

Propulsion Shaft Rope Guards, Inspect

D-016

Appendages, U/W, Internal, Preserve - Tender

D-017

Voids, Non-Accessible, Leak Test - Tender

D-018

Voids, Non-Accessible, Internal Surfaces, Preserve

D-019

Tanks, MP Fuel Service, Clean and Inspect - Tender

D-020

Propulsion Shafting, Strain Gage Alignment, Inspect

D-021

Propulsion Shafting; Remove, Inspect, and Reinstall

D-022

Propulsion Shaft Seals, Mechanical Clean and Inspect

D-023

Propulsion Shaft Seals, Mechanical Overhaul and Inflatable Renew

D-024

Propulsion Shaft Bearings, External, Check Clearances

D-025

Propulsion Shaft Bearings, External, Renew

D-026

Stern Tube Interior Surfaces, Preserve, 100 Percent

D-027

Propeller s, Remove, Inspect, and Reinstall

D-028

Propeller, Minor Repairs and Reconditioning, Perform

D-029

Keel Coolers, Clean, Inspect and Hydro

D-030

Fathometer Transducer, Renew – Tender

D-031

Sea Valves and Waster Pieces, Overhaul Or Renew

D-032

Sea Strainers, All Sizes, Renew

D-033

Rudder Assembly, Remove, Inspect And Reinstall

D-034

Rudders, Preserve, 100 Percent

D-035

Hull Fittings (Mooring and Towing), Inspect and Test - Tender

D-036

Sewage Holding Tanks, Clean and Inspect - Tender

D-037

Tanks (Sewage Holding), Preserve, 100 percent - Tender

D-038

Tanks (Sewage Holding), Preserve, Partial - Tender

D-039

Tanks, Fuel, Preserve, 100 Percent - Tender

D-040

Tanks, MP Fuel Service, Preserve, Partial - Tender

D-041

Decks - Exterior, Preserve, Non-Skid MIL-PRF-24667 System,

D-042

Superstructure, Preserve, 100 Percent

D-043

Superstructure, Preserve, Partial

D-044

Exhaust Stacks, Exterior, Preserve

D-045

Exhaust Stacks (Exterior), Preserve - Partial

D-046

Cathodic Protection, Zinc Anodes, Renew, - Tender

D-047

Drydock - Tender

D-048

Temporary Services, Provide - Tender

D-049

Sea Trial Performance, Support, Provide

D-050

Main Mast, Preserve, 100%

D-051

Main Mast, Preserve - Partial

D-052

Hull Plating, Side Scan, Ultrasonic Testing, Barge - Barge

D-053

Hull and Structural Plating, General, 10.2 lbs. Steel, Renew - Barge

D-054

Hull and Structural Plating, General, 12.75 lbs. Steel Plate, Renew - Barge

D-055

Hull and Structural Plating, General, 15.3 lbs. Steel Plate, Renew - Barge

D-056

Hull And Structural Plating, General, 20.4 lbs. Steel Plate, Renew - Barge

D-057

Hull and Structural Plating, General, 7.5 lbs., 3/16 in. Steel Plate, Renew - Barge

D-058

Hull and Structural Plating, General, 7.65 lbs. Steel Plate, Renew - Barge

D-059

Hull And Structural Plating, General, Cracked Steel Welds, Repairs - Barge

D-060

Hull and Structural Plating, General, Degraded Weld, Steel, Repair - Barge

D-061

Appendages, U/W, Leak Test - Barge

D-062

Appendages, U/W, Internal, Preserve - Barge

D-063

Voids (Accessible, Weather Deck Exposed), Inspect- Barge

D-064

Tanks, MP Fuel Service, Clean and Inspect - Barge

D-065

Voids, Accessible, Clean and Inspect - Barge

D-066

Accessible Voids, Preserve, 100 Percent - Barge

D-067

Tanks, Fuel, Preserve, 100 Percent - Barge

D-068

Tanks, MP Fuel Service, Preserve, Partial - Barge

D-069

Accessible Voids, Preserve, Partial - Barge

D-070

U/W Body, Preserve, 100 percent - Barge

D-071

Hull Plating Freeboard, Preserve, Partial - Barge

D-072

Hull Plating Freeboard, Preserve, 100 Percent - Barge

D-073

Superstructure, Preserve, 100 Percent - Barge

D-074

Superstructure, Preserve, Partial - Barge

D-075

Cathodic Protection, Zinc Anodes, Renew - Barge

D-076

Temporary Services, Provide - Barge Barge

D-077

Sea Trial Performance, Support, Provide - Barge

D-078

Sea Valves and Waster Pieces, Overhaul Or Renew - Barge

D-079

Sea Strainers, Duplex, All Sizes, Overhaul - Barge

D-080

Spuds, Overhaul - Barge

D-081

Spud Wells, Preserve - Barge

D-082

Spud Winches, Inspect & Service - Barge

D-083

Spud Winch es, Renew - Barge

D-084

Spud Wells, Inspect - Barge

D-085

Decks – Exterior (Buoy or Construction Deck), Preserve 100%

D-086

Drydock - Barge

D-087

Boat Davit Winch, Shrink Wrap

D-088

Buoy and Cargo Handling Crane, Shrink Wrap

D-089

Pusher Knee Repair

D-090

Fiddley Door, Replace

D-091

Passageway Door, Replace

D-092

Galley Door, Replace

D-093

Crew Head Door, Reinstall

D-094

Engine Coolant System Piping, Renew [Barge]

D-095

Bulwark Repair

D-096

Barge Engine Exhaust Piping, Renew

D-097

Independent NACE Inspector (Level 3), Provide

D-098

Tenting, Provide

ANTICIPATED PERIOD OF PERFORMANCE:

06 January 2027 through 06 April 2027 (Subject to change at the discretion of the Government). If the company is unable to meet this period of performance, it is incumbent upon the company to propose an alternative 70 calendar day period of performance.

SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to POC listed in the Sam.Gov announcement with the following information/documentation: Ou Saephanh @ contact@example.gov and Sandra Martinez @ Sandra.A.Martinez@uscg.mil no later than 8:00 AM Pacific Time 11 July 2026, with all of the following information/documentation:

1. Name of Company, Address and DUNS Number.

2. Point of Contact and Phone Number.

3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HUBZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern

4. Documentation Verifying Small Business Certification: Please provide the following documentation as it applies to your company.

a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA.
b. If claiming HUBZone status, provide a copy of your HUBZone Certificate from SBA.
c. If claiming SDVOSB status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611.
d. If claiming VOSB status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611.
e. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million.
f. If claiming Woman Owned Small Business (WOSB) status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611.
g. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611.

5. Statement of Proposal Submission: Statement that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice.

6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant.

SAM: Interested parties should register at the System for Award Management (SAM) website as prescribed in FAR Clause 52.204-7 System for Award Management (OCT 2018). SAM can be obtained by accessing the internet at https://www.sam.gov/SAM/ or by calling +1 (555) 000-0000.

Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition.