Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

USCGC SENTINEL-CLASS CUTTERS FY27 QL3 Engine Overhaul Project.

Active
N4033926RF510PSLFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The US Coast Guard is preparing to award a contract for the FY27 QL3 engine overhaul of Sentinel-class cutters, with work scheduled to occur at a contractor’s facility in Singapore from January 4 to February 22, 2027. The primary scope of work involves the 8,000-hour maintenance overhaul of the main diesel engines, with an optional additional task to bore cylinders and install new liners. Technical specifications and drawings will be provided after the solicitation is issued, and all performance must occur outside the United States. The Government intends to release the Request for Proposal in September 2026 through SAM.gov, and only contractors legally authorized to operate in Singapore are eligible to respond, in alignment with DFARS 225.603(3). Prospective bidders must also complete full registration in the JCCS system via JCCS.gov and maintain this access throughout contract performance. There are no socio-economic set-asides for this acquisition, and all responsible and eligible parties may submit proposals once the solicitation is published. Questions regarding the pre-solicitation notice must be directed in writing to the listed contracting officers and specialists.

General Info

USCG to overhaul Sentinel-class cutter engines in Singapore, Jan–Feb 2027, only Singapore-authorized contractors eligible.

Agency

Department Of Defense → Navsup Flc BahrainView Agency

NAICS

336611 - Ship Building and RepairingView NAICS

Place of Performance

AE, SGP

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Flc Bahrain
Contacts2 people available
OfficeFPO, AE, 09834-0001, USA
Organization / Agency
Department Of Defense → Navsup Flc Bahrain
View Agency Profile
Office AddressFPO, AE, 09834-0001, USA
Contacts
Ryan Decena
contact@example.gov
Lisbon Dennis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

Subject: USCGC SENTINEL-CLASS CUTTERS FY27 QL3 Engine Overhaul Project.


Solicitation Number: N4033926RF510PSL



Description:


This is a pre-solicitation notice for an upcoming requirement by United States Coast Guard (USCG) SENTINEL-CLASS CUTTERS which is scheduled for a Dockside repair in January 2027. The Dock Side maintenance availability designed to complete all standard recurring maintenance items for propulsion engine overhauls.


The anticipated scope of work consists of one (1) work item as shown below:


  • WORK ITEM 1:  USCG SENTINEL-CLASS CUTTERS MDE, 8000 Hour Maintenance (QL3)
  • WORK ITEM 2 (Optional):  USCG SENTINEL-CLASS CUTTERS MDE, Cylinder Boring and Installation of New Liners

Technical drawings and specifications will be provided upon request after the solicitation has been issued.


The work will be performed at the contractors facility located at Singapore. The anticipated Period of Performance (POP) is from 04 January 2027 to 22 February 2027.


Projected Solicitation:


The Government anticipates issuing a Request for Proposal (RFP) on September 2026. The solicitation and any subsequent amendments will be made available through the System for Award Management (SAM.gov) website.


Competition and Eligibility:


The solicitation upon issuance is intended only for sources duly authorized to operate and do business in Singapore, as prescribed by DFARS 225.603(3). In addition to the general standards in FAR 9.104-1, to be determined responsible, the prospective contractor must have completed all registration requirements for access to US government installation, equipment, and personnel in the US Government Information Technology (IT) Joint Contingency and Expeditionary Services (JCXS) system containing the Joint Contingency Contracting System (JCCS) module found at www.JCCS.gov. This registration shall be maintained throughout the performance of the contract.


Set-asides:


No socio-economic set-asides will be used for this acquisition.


Point of Contact (POC):


  • Dennis R. Lisbon, dennis.r.lisbon.civ@us.navy.mil (Contracting Officer)
  • Prince K. Joseph, prince.k.joseph.ln@us.navy.mil (Contracting Officer)
  • Ryan A. Decena, ryan.a.decena.ln@us.navy.mil (Contract Specialist)
  • Tracey Daggy, tracey.i.daggy.civ@us.navy.mil (Contract Specialist)

Additional Information:


This notice is NOT a request for proposals. The solicitation, when issued, will be available electronically via the System for Award Management (SAM) website at https://sam.gov/. All responsible and eligible sources may submit a quotation, bid, or proposal, as appropriate, in response to the subsequent solicitation, which will be considered by the agency. It is the responsibility of interested parties to monitor this site for the release of the solicitation and any subsequent amendments.


All questions regarding this pre-solicitation notice should be submitted in writing to the POC’s listed above.

Similar Contracts

Same NAICS industry code

NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
Federal
HIGH PRESSURE AIR COMPRESSOR
Solicitation # N0040626QS173
The contract is for the repair, overhaul, and replacement of two high-pressure air compressors—Unit No. 1 in Main Machinery Room 1 and Unit No. 2 in Main Machinery Room 2—both manufactured by Curtiss-Wright, model 13/20NL20, identified under APL 061900412. The work is to be performed on-site at U.S. Navy facilities in Japan during the period of performance from August 19, 2026, to October 2, 2026, with delivery and acceptance taking place at Sasebo and Yokosuka under FOB Origin terms, meaning risk transfers to the government at the point of shipment. The contract is issued as a firm fixed price purchase order under solicitation N0040626QS173 by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, with performance located in Japan and administrative oversight managed from Bremerton, Washington. The solicitation specifies an urgent timeline, with responses due by July 31, 2026, and requires full compliance with Department of Defense unique item identification (IUID) standards, mandating that all equipment be marked with a machine-readable Data Matrix symbol compliant with ISO/IEC 16022 ECC200, following MIL-STD-130 for data encoding and validation. Packaging and labeling must adhere to MIL-STD-129, and all invoicing must be processed electronically through Wide Area WorkFlow (WAWF), with no alternative systems authorized. Evaluation of proposals will be conducted on a best value trade-off basis, prioritizing delivery performance first, followed by price, past performance, and technical acceptability as a mandatory threshold. Offers with a Supplier Performance Risk System (SPRS) quality rating of Red or Yellow, or a weighted delivery score below 70, will be deemed unacceptable regardless of pricing competitiveness. Technical acceptability is a go/no-go criterion, and failure to meet it disqualifies an offer from further consideration. Contractors must demonstrate past performance through SPRS data and ensure personnel comply with stringent security protocols, including appropriate Tier 3, Tier 5, or NACI background investigations depending on access levels, mandatory registration in the SPOT system for personnel in Japan, and adherence to antiterrorism and cybersecurity directives. Compliance with representations related to foreign-made unmanned aircraft systems, whistleblower protections, prohibitions on improper payments, and electronic
Navsup Flt Logistics Ctr Puget Sound

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336611
New
Federal
LPD-18 AIT Support for S/A-30961 K (Voyage Data Recorder); provide
Solicitation # N6264926Q0502
This solicitation, issued by the NAVSUP Fleet Logistics Center Yokosuka Site Sasebo, is exclusively targeted at holders of a current Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR) authorized to operate in Japan, with mandatory active registration in SAM.gov and compliance with DFARS 225.1103(3). Proposals must be submitted by 10:00 AM Japan Standard Time on August 19, 2026, for AIT support services related to the Voyage Data Recorder system S/A-30961 K aboard the USS NEW ORLEANS (LPD-18), with performance scheduled from October 22, 2026, to January 30, 2027. Access to technical specifications is restricted to DoD SAFE, requiring potential offerors to request access via email to the primary point of contact; once granted, access expires after seven days. Offerors without an existing MSRA or ABR in Japan must explicitly state their intention and plan to apply for one alongside any inquiries, or their submissions will not be considered. The solicitation number is N6264926Q0502, classified under NAICS code 336611, with no set-aside applied, and all communication must be directed to Akiko Tashiro at the designated U.S. Navy email address.
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336611
New
Federal
USS RAFAEL PERALTA (DDG-115) 6JI SIA FARM OUT BUNDLE 2
Solicitation # N6264926RA049
The contract pertains to the ship repair, maintenance, and overhaul of the USS RAFAEL PERALTA (DDG-115) under the 6JI SIA bundle, to be performed at Commander, Fleet Activities Yokosuka Naval Base in Japan, with a period of performance from 28 July 2026 to 22 September 2026. The work is structured around nine Task Group Instructions detailing repair, preservation, and replacement tasks, requiring strict adherence to NAVSEA Standard Items, SRF-JRMC Local Standard Items, and applicable federal and military standards, including MIL-STD-129 and MIL-STD-130 for packaging, marking, and unique item identification using Data Matrix symbols with ISO/IEC 15418 and 15434 encoding. All technical specifications, drawings, and attachments are accessible only through DoD SAFE, requiring offerors to request access via the designated contracting points of contact, Irene Saito and Peter Arrieta. Proposals must be submitted electronically by 29 May 2026 at 10:00 a.m. Japan Standard Time, include a fully completed SF33, Price Proposal Breakdown Form, and current MSRA or ABR certification, and acknowledge all amendments to the solicitation, with Amendment 07 issued on 3 June 2026 incorporating revised technical and pricing information. Contractors must comply with hazardous material identification requirements under FAR 52.223-3 and DFARS 252.223-7001, disclose anticipated sea transportation under DFARS 252.247-7022, and ensure all personnel undergo background investigations, including SF-86 submission and fingerprinting, with results processed through the DoD Central Adjudication Facility, along with annual cyber awareness training for IT access. The contract mandates full compliance with 29 CFR 1915 for occupational and health standards, extends commercial warranties to the Government at no cost, and strictly controls the handling of Controlled Unclassified Information in accordance with SRF-JRMC policies. Final inspection and acceptance occur at the SRF-JRMC facility in Yokosuka, with the Government retaining sole authority to reject non-conforming work under DFARS 252.217-7005. No contract value, CLIN details, or specific evaluation factors are provided in the documentation,
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336611
New
Federal
20--CYLINDER,DUPLEX
Solicitation # N0010426QYA76
This contract pertains to the manufacture of the CYLINDER,DUPLEX for use on SSN 774 Class submarines, specifically as a hydraulic accumulator component governed by NAVSEA Drawing 556-7107927, Find 46. The item must be fabricated from ASTM-A890 Grade 1B duplex stainless steel and conform to exact dimensional and material specifications outlined in the drawing and supporting technical documentation. The contract incorporates stringent quality, configuration, and inspection controls, requiring compliance with MIL-STD-129 for marking, MIL-STD-973 for configuration management, and ISO 9001 for quality systems. All items must be mercury-free and free from contamination, with strict prohibitions against mercury use unless explicitly approved in writing, including the submission of detailed justification and protective measures. Government inspection is mandatory, and the contractor assumes full responsibility for ensuring conformance, even in the absence of explicit inspection clauses. The procurement is issued under Emergency Acquisition Flexibilities and designated as a rated order under the Defense Priorities and Allocations System (15 CFR 700), prioritizing accelerated delivery. All freight is FOB Origin, and the resultant award requires bilateral acceptance by the contractor. The solicitation is open to both small and large businesses, with the closing date for quotes extended to July 31, 2026. Documentation required includes a comprehensive list of referenced drawings, military standards, and technical publications, all of which must be obtained by the contractor. The contract mandates strict adherence to technical inquiries, change proposals, waivers, and deviations through official channels, with unauthorized modifications at the contractor’s risk. The contracting office is located in Mechanicsburg, PA, with the point of contact provided for inquiries, and the NAICS code 336611 confirms the nature of the industrial classification.
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in 26 days
View Details
NAICS: 336611
New
Federal
LHA-7 No.3 JP-5 Purifier and Motor, repair
Solicitation # N6264926Q0500
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 8 hours ago

DEADLINE

N/A
View Details
NAICS: 336611
New
Federal
Homeland Security Cutter - Light Icebreaker (HSC-L) Solicitation
Solicitation # 70Z02326R93280004
The United States Coast Guard is seeking proposals under Solicitation No. 70Z02326R93280004 for the design, fabrication, construction, testing, delivery, and logistical support of Homeland Security Cutter - Light Icebreaker (HSC-L) vessels under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract. The acquisition follows a two-phase advisory down-select process, with Phase 1 proposals due by 12:00 PM U.S. Eastern Time on July 20, 2026. Offerors must submit three volumes of documentation: Volume I includes a Cover Letter, Design and Production Capability (five pages), and Past Performance (six pages total), with at least one of the three past performance references required to demonstrate prime contractor work. Phase 2 proposals, to be submitted by down-selected offerors following a subsequent amendment, will include Project Approach (15 pages), Schedule (5-page narrative), and a Price Proposal. Evaluation is based on five non-price factors—Design and Production Capability, Past Performance, Project Approach, Schedule, and Total Evaluated Price—with award made on a best value basis using a tradeoff approach. The contract is a Firm Fixed Price type with five one-year ordering periods, and the Government will provide a contract design to be matured into a production-ready state by the contractor, including development of a 3D technical data package and weight control. Deliverables include up to seven vessels, long lead time materials, technical data submissions, crew training, insurance spares, and transport, with production limited to no more than four vessels per year unless authorized. The solicitation mandates compliance with specific packaging and marking standards, including MIL-STD-129, 2D barcoding per USCG standards, and Performance Oriented Packaging requirements for hazardous materials under Title 49 CFR, IMDG, ICAO, AFMAN, and DOD 4500.9R. The contract incorporates Buy American provisions, replacing Trade Agreements clauses, and adds the Brand Name or Equal requirement, with engine and major equipment specifications to be defined in Phase 2. Past Performance Questionnaires may be revised until August 3, 2026, and all offerors must acknowledge receipt of amendments, including A00003, which also removes references to foreign contractor disclosures pending Phase 2. The system will be built to the Homeland Security Cutter - Light Specification using standardized systems like S
Hq Contract Operations (CG-912)(000

POSTED

about 8 hours ago

DEADLINE

in about 22 hours
View Details
NAICS: 336611
New
Federal
Sole Source to Innovative Professional Solutions for Conditional Assessment and Repair Events (CARE) Mine Hunting Sonar Set
Solicitation # N61331-26-Q-JK40
The contract is a sole-source award to Innovative Professional Solutions for the provision of Conditional Assessment and Repair Events (CARE) Mine Hunting Sonar Set solutions, exclusively justified and authorized under the specified procurement criteria. It is issued by the Naval Surface Warfare Center under the Department of Defense, with the solicitation number N61331-26-Q-JK40 and a NAICS code of 336611, indicating a focus on ship and boat building and repairing. The opportunity was posted on August 5, 2026, with a response deadline of August 10, 2026, at 4:00 PM, and is classified as a combined contract, meaning it may include various types of procurement actions. Performance will be conducted at Panama City Beach, Florida, 32407, with no set-aside designation applied, and the primary point of contact is Jamell L. Kilgore, reachable via email at jamell.l.kilgore.civ@us.navy.mil.
Naval Surface Warfare Center

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336611
New
Federal
LHA-7 STBD ACCOMMODATION LADDER; ASSESSNONSKID DECK COVERING OIN STBD ACCOM LADDER PLATF; REPLACE
Solicitation # N6264926Q0504
This solicitation, issued by the NAVSUP Fleet Logistics Center Yokosuka Site Sasebo, is exclusively for holders of a current Master Ship Repair Agreement or Agreement for Boat Repair certified in the Sasebo, Japan region, and requires active registration in SAM.gov. Only entities duly authorized to conduct business in Japan under DFARS 225.1103(3) are eligible to respond. Offerors without an existing MSRA or ABR must explicitly state their intent and plan to apply for such an agreement alongside their inquiries; submissions lacking this statement will be disregarded. Access to the detailed work specification package is restricted and can only be obtained via DoD SAFE, requiring a formal request to the primary point of contact, with access limited to seven days once provided. The work involves assessment and replacement of non-skid deck covering on the starboard accommodation ladder of USS TRIPOLI (LHA-7), identified by contract line items 38DJ262301-00-A01 and 38DJ262302-00-A01. Proposals must be submitted no later than August 19, 2026, at 10:00 AM Japan Standard Time. The anticipated period of performance runs from October 13, 2026, to January 29, 2027. The solicitation number is N6264926Q0504, with a NAICS code of 336611, and the place of performance is Sasebo, Nagasaki, Japan. All communications must be directed to Akiko Tashiro at the provided U.S. Navy email address.
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336611
New
Federal
20--TILE
Solicitation # N0010425RYG75
This contract solicitation is for the procurement of SHT Tiles, specifically AD-79 Shape A, identified by NSN 1HS 2090 012244914 ST, with a total quantity of 4,200 units split evenly between two CLINs, each for 2,100 tiles. The contract is firm-fixed-price and requires strict adherence to classified technical drawings 5808346 and 5808344, which are marked Confidential and necessitate a government security clearance and a DD Form 254 for access to sensitive national security information. The tiles are part of the Special Hull Treatment Program for submarines and surface ships and must meet detailed engineering, material, and manufacturing standards outlined in Naval Surface Warfare Center drawing 53711-5808278. Contractors must follow exact specifications for material composition, including a prohibition on mercury contamination, and must ensure all molds meet critical dimensional equivalency. First Article Testing and Production Lot Testing are mandatory and conducted by government facilities, with samples consumed during testing not returned. All deliveries require a Certificate of Conformance or Certificate of Acceptance per unit, with traceability to material batches and documentation submitted according to strict DD Form 1423 data requirements. The contractor is responsible for full inspection compliance, quality assurance under MIL-I-45208 or ISO 9001, and maintaining auditable manufacturing records. The contract includes stringent configuration control per MIL-STD-973, requiring all changes, waivers, or deviations to be formally approved by the Contracting Officer. Packaging, marking, and preservation must comply with MIL-STD-2073 and MIL-STD-129, with special labeling including "SHT" in one-inch black lettering. All materials must have a five-year uninstalled shelf life, and cleaning during production must use butyl acetate in accordance with ASTM D 4615 under strict safety and environmental protocols. The solicitation is subject to the Defense Priorities and Allocations System (DPAS) rating for national defense, the Buy American Act, and requires small business subcontracting and veteran/disability equal opportunity compliance. Delivery is due within 200 days for the first CLIN and 500 days for the second, with the solicitation closing extended to April 17, 2026. All contractual documents are deemed issued upon electronic transmission or
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
Federal
LPD-18, ELM-265061, Repair of Deck in CPS Fan Room Clean Side 02-124-2-Q; accomplish
Solicitation # N6264926Q0499
This solicitation, issued by NAVSUP Fleet Logistics Center Yokosuka Site Sasebo, is exclusively targeted at holders of current Master Ship Repair Agreements or Agreement for Boat Repair certifications in the Sasebo, Japan region, with mandatory active registration in SAM.gov. Only entities legally authorized to operate in Japan under DFARS 225.1103(3) are eligible to respond, and proposers without an existing MSRA or ABR must explicitly state their intent and plan to apply for such an agreement alongside any inquiries—failures to do so will result in no response from the government. Access to the full work specification package is strictly controlled through DoD SAFE, requiring potential offerors to first request access via email to the primary point of contact, Akiko Tashiro, with a seven-day window to download materials once the link is provided. The requirement centers on repairing the deck in the CPS Fan Room Clean Side 02-124-2-Q aboard USS NEW ORLEANS (LPD-18), with proposals due no later than August 19, 2026, at 10:00 AM Japan Standard Time. The performance period is scheduled from October 22, 2026, to January 30, 2027, under contract number N6264926Q0499 and ELM-265061, classified under NAICS code 336611, with performance located at Sasebo, Nagasaki, Japan, and all communications managed through the U.S. government's secure systems.
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336611
New
Federal
USS HIGGINS 6C1 SRA BUNDLE 7
Solicitation # N6264926RA066
The solicitation N6264926RA066 for the USS HIGGINS (DDG-76) Ship Alteration requires contractors to perform a comprehensive repair and maintenance package under a firm fixed price arrangement, with work to be executed aboard the vessel at Commander, Fleet Activities Yokosuka. The primary tasks include corrosion hole repair under TGI 38KB344120-A01 and structural, sheet metal, and false deck work under TGI 38KB344124-A01, along with associated growth work totaling seven percent of each base CLIN’s proposed cost. Technical specifications are detailed in Attachment (I), accessible only through DoD SAFE upon request submitted by August 12, 2026, and include NAVSEA standard items, military standards, builder’s drawings, and technical manuals. Proposals must be submitted by August 19, 2026, at 10:00 AM JST via email to Miwa Takahashi, with all documents in English and formatted for Microsoft Office 2016 or Adobe Acrobat Reader 2017. Only offerors with an active U.S. Navy MSRA or ABR as a prime contractor are eligible, and foreign firms must prove authorization to operate in Japan under DFARS 252.225-7042. All proposals must include certified copies of MSRA/ABR agreements, SAM registration confirmation, a mission-essential services plan not exceeding five pages, and certification of hazardous materials and sea transportation if applicable. The contract is subject to inspection by government representatives at SRF and JRMC Yokosuka, with quality assurance mandated under NAVSEA Standard Item 009-04 and DFARS 252.217-7005, allowing the government to reject work failing to meet the contractor’s own quality system. Work is scheduled to begin October 5, 2026, and conclude by May 11, 2027, under a lowest price technically acceptable evaluation method where technical acceptability and responsibility are pass/fail gates, and award will go to the lowest-priced qualified offeror. Additional requirements include compliance with U.S. Navy security protocols, mandatory crane certifications adhering to OSHA and Japanese standards, and adherence to SOPA directives and OPNAVINST 5530.14 for vessel access.
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details