Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Homeland Security was posted on October 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

USCGC WILLIAM TATE DRYDOCK REPAIRS

Closed
CGC-WILLIAM-TATE-DRYDOCK-REPAIRS Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611
New
Federal
MUNRO DS FQ4
Solicitation # 70ZU02_MUNRO_DS_FQ4
The United States Coast Guard Surface Forces Logistics Center is conducting market research to identify capable firms for dockside repairs and alterations to the USCGC MUNRO (WMSL 755) in Alameda, California. The anticipated period of performance is from July 27, 2027, through October 27, 2027. The scope of work includes a variety of technical tasks, such as inspecting and testing the fire detection system, certifying miscellaneous system relief valves, renewing refrigeration plant flexible hoses, cleaning and testing compressed air receivers, and performing repairs on polymeric and slip-resistant deck coverings. Additionally, the contractor will be responsible for the installation of Elex dry air compressor equipment, the preservation of the helo hangar door curtain assembly, and the grooming of the oily water separator system. The contractor must provide all necessary labor, materials, and equipment, adhering to strict SFLC standard specifications for preservation, welding, and quality control. Key requirements include the submission of a comprehensive preservation plan and the provision of a NACE Level 3 Certified Coating Inspector. All work must comply with safety standards, including CFR Title 29 Part 1915 for shipyard employment and MIL-STD-1689A for ship structure fabrication. Interested parties must submit their capabilities and past performance information by December 11, 2026. This action is currently a sources sought notice for market research purposes, and no set-aside status has been designated.
CG-SEA-C22

POSTED

2 days ago

DEADLINE

in 19 days

AI Contract Overview

Show more

The U.S. Coast Guard is seeking sources for drydock and dockside repairs for the USCGC WILLIAM TATE (WLM 560). The anticipated period of performance is from April 6, 2027, to August 4, 2027, with work to be conducted at the contractor's facility. The extensive scope of work includes hull plating inspection and preservation, ultrasonic testing, tank cleaning, and the renewal of Z-drive propulsion units, transducers, and sea valves. Additionally, the project involves servicing hydraulic winches, anchor windlasses, buoy cranes, and performing various interior and exterior deck preservation tasks. Interested companies must submit their responses to Mr. Iran Walker by October 19, 2026, at 1:00 pm Eastern Standard Time. Submissions must include the company name, unique entity ID, point of contact information, and business size status relative to NAICS code 336611, along with a positive statement of intent to bid as a prime contractor. Depending on the responses received, the Coast Guard will determine if the requirement will be unrestricted or set aside for specific small business categories before posting the final solicitation on sam.gov.

General Info

US Coast Guard seeks drydock and dockside repairs for USCGC WILLIAM TATE by 2027.

NAICS

336611 - Ship Building and Repairing

Place of Performance

DC

Set-Aside

NONE

Documents

0

No documents available

No documents were posted with this contract.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Marine Hatch Fabrication and SupplyOpen now, due in 8 days
  • O-RINGOpen now, due in 8 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → CG-SEA-CA3
Contacts1 person available
OfficeWashington, DC, 20593, USA
Office AddressWashington, DC, 20593, USA

Full Description

Show more

Replies should be sent by 19 October 2026, 1:00 pm Eastern Starndard Time to:


Mr. Iran Walker, Email: Sign up to see this detail


The U.S. Coast Guard is looking for sources which would be interested in performing Drydock Repairs for Coast Guard Cutter WILLIAM TATE (WLM 560)


USCGC WILLIAM TATE (WLM 560) HOMEPORT ADDRESS: 1 Washington Avenue, Philadelphia, PA. 19147


ANTICIPATED PERIOD OF PERFORMANCE: April 6, 2027, to August 4, 2027 (Subject to change)


PLACE OF PERFORMANCE: Contractor Facility    


The scope of this acquisition is for the dockside repairs of various work items for USCGC WILLIAM TATE (WLM 560).  The work will include, but is not limited to:


Fire Prevention Requirements


Hull Plating, U/W Body, Inspect


Hull Plating, U/W Body, Ultrasonic Testing


Hull Plating, Freeboard, Ultrasonic Testing


U/W Body, Preserve, 100 percent


U/W Body, Preserve, Partial, Condition B


Appendages, U/W, Leak Test


Chain Lockers, Clean and


Tanks, MP Fuel Stowage and Overflow, Clean and Inspect


Tanks, MP Fuel Service, Clean and Inspect


Tanks, Ballast, Clean and Inspect


Tanks, Dirty Oil and Waste, Clean and Inspect


Hydraulically Operated Cargo Hatch, Inspect and Service


Z-Drive Propulsion Unit, Renew, Drydock


Fathometer Transducer, Renew


Underwater Speed Log, Transducers, Renew


Sea Valves and Waster Pieces, Overhaul or Renew


Sea Strainers, Duplex, All Sizes, Overhaul


Sea Bay, Clean and Inspect


Thruster Unit (General), Overhaul


Thruster Unit Bearings, Renew


Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test


Hydraulic Chain Stoppers, Inspect and Service


Hydraulic Crossdeck Winches, Inspect and Service


Hydraulic Inhaul Winch, Inspect and Service


Mechanical Chain Stoppers, Inspect and Service


Anchor Windlass, Inspect and Service


Anchor Chains and Ground Tackle, Inspect and Repair 


Warping Capstan (Aft), Inspect and Service


Single Point Davit, Disassemble and Inspect


Buoy Crane, Inspect and Service 


Chain Locker, Preserve, 100 Percent


Decks – Exterior (Buoy or Construction Deck), Preserve 100%


Cathodic Protection, Zinc Anodes, Renew


Drydock


Temporary Services, Provide - Cutter


Sea Trial Performance, Support, Provide


Sewage Service Piping COV, Install


Sewage Vent Piping, Renew


Piping, Renew


Line Locker, Partial Preserve


Deck Covering, Interior, Wet and Dry, Renew


Bilges, Preserve


Cargo Hold Deck Inspection and Repair


Fo'c'sle Bulkhead Inspection and Repair


Shore Power Cable Rack Foundation Renew


Remote Cutoff Valve Deck-box Renew


Sea Strainers, All Sizes, Renew


Z-Drive Input Drive Shaft, Bearings Inspect


Hull Plating Freeboard (Buoy Port Areas), Preserve


Cargo Hold Deck, Preserve 100%


Buoy Deck Pad-Eyes, Repair


Cargo Hatch Hinge, Modify


Anchor Chain Stoppers and Foundations, Renew


Companies which would be interested in submitting a proposal for this requirement should reply to this Sources Sought Notice noting their business size status such as large business, small business, HUBZone, Service-Disabled Veteran-Owned, Women Owned Small Businesses…


Include the following information:


Subject Line: Sources Sought Response for Dockside (DS) Repairs.


1. Company Name, Address, and Unique Entity ID:


2. Point of Contact, Phone number, and Email address:


3. Business Size applicable to the NAICS Code:


• Please state which of the following applies to your company for Business Size:


a. 8(a) Small Business Concern.


b. HUBZone Small Business Concern.


c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC).


d. Veteran Owned Small Business Concern (VOSBC).


e. Economically Disadvantaged Woman Owned Small Business Concern (EDWOSB).


f. Woman Owned Small Business Concern (WOSBC).


g. Small Business Concern.


h. Large Business Concern


4. A positive Statement of your intention to submit a bid for this solicitation as a prime contractor


5. Documentation Verifying Small Business Certification. Please provide the following documentation as it applies to your company:


If claiming 8(a) status, provide a copy of your 8(a) Certification from the Small Business Administration (SBA).


If claiming HUBZone status, provide a copy of your HUBZONE Certificate from the SBA.


If claiming SDVOSBC status, provide documentation that shows the Service-Disabled Veteran (SDV) unconditionally owns 51% of the business, controls the management and daily operations, and holds the highest officer position in the company.  Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs.  Provide documentation that shows the business is small under the NAICS code 336611.


If claiming VOSBC status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, makes long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611.


If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million


If claiming Woman Owned Small Business status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611.


Shortly after receiving responses the Coast Guard will determine if this requirement will be set aside or unrestricted.  After the determination a combined synopsis/solicitation will be posted on this website https://sam.gov


Replies should be sent by 19 October 2026,  1:00pm Eastern Standard Time to Mr. Iran Walker,


Email: Sign up to see this detail.  

Earlier notices in this NAICS code

Posted before this notice, open and closed

Get AI-powered intelligence on the opportunities still open

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS