Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Used Oil and Fuel Filter Disposal

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract covers the comprehensive collection, draining, crushing, and recycling of used oil and fuel filters with strict adherence to environmental regulations to ensure the safe recovery of residual oil and metal components. All activities must comply with applicable federal and state environmental standards to prevent contamination and promote sustainable practices throughout the process. The scope is focused on the responsible end-of-life management of automotive and industrial fluid-handling components used in defense operations. This subcontract, awarded under the NAICS code 336310 for automotive engine and parts manufacturing, is managed by the Defense Logistics Agency under the Department of Defense. While specific performance locations and contact details are not provided, the work is tied to defense supply chain requirements and must meet the agency's environmental and operational compliance protocols. The contract was posted on July 15, 2026, and is accessible through the DIBBS portal with the indicated award and delivery order identifiers, signaling its integration into existing defense logistics infrastructure.

General Info

Collection, draining, crushing, and recycling of used oil and fuel filters for defense operations under environmental regulations.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SP450026F6426.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TX01C1

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 15

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Collection, draining, crushing, and recycling of used oil and fuel filters, including proper environmental compliance for residual oil and metal recovery.

Similar Contracts

Same NAICS industry code

Supply of Collar Assembly, Valve (NSN 4820-01-362-5883)This subcontract, issued by the DLA Weapons Support Nuclear Reactor Program under the Department of Defense, requires the manufacture or sourcing of eight Valve Collar Assemblies, identified by NSN 4820-01-362-5883. The contractor must ensure all units meet strict technical specifications, specifically excluding the use of additive manufacturing processes. Compliance with MIL-STD 129 for marking and RP001 for DLA packaging is mandatory for all deliverables. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336310, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 12 hours ago

DEADLINE

Engine Crankshaft Supply (NSN 2815-01-717-8078)This subcontract involves the procurement of one Engine Crankshaft to support prime contractors under DLA Weapons Support contracts. The selected provider is responsible for manufacturing or sourcing a crankshaft that strictly conforms to NSN 2815017178078 and the DLA Master List of Technical and Quality Requirements RA001. Additionally, the contractor must ensure all marking is performed in accordance with MIL-STD-129 and deliver the packaged item FOB Origin. Managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, the contract falls under NAICS code 336310. The place of performance is located in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

STEM, NEEDLE VALVE

Solicitation # SPE7MC-27-T-1312

Solicitation SPE7MC-27-T-1312 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of one needle valve stem, identified as NSN 4820016239450 and manufacturer part number D49-8-13-M from Dante Valve Company. Designated as a critical application item, the supply must be delivered to the USS Tripoli LHA 7 within 20 days after receipt of the order, with an original required delivery date of October 22, 2026. The contract specifies FOB Destination for both inspection and acceptance. The procurement includes strict technical and quality requirements per the DLA Master List (RA001) and mandates compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury. The contractor must adhere to various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

REGULATOR, ENGINE GE

Solicitation # SPE7L1-27-T-2899

Solicitation SPE7L1-27-T-2899 is a Women-Owned Small Business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of 155 units of GE Engine Regulators (NSN 2920-01-728-9980). This is a restricted source item requiring engineering source approval by the government design control activity. The required delivery date is November 9, 2026, with a delivery timeline of 40 days after order. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA Master List technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. Key regulatory clauses are incorporated, including DFARS requirements for safeguarding covered defense information, cyber incident reporting, and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

TANK, FUEL, ENGINE

Solicitation # SPE7L1-27-U-0154

Solicitation SPE7L1-27-U-0154 is a request for quotations for the procurement of engine fuel tanks, identified by NSN 2910016453684. This is a total small business set-aside for a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000 dollars. The estimated annual quantity is 20 units, with a guaranteed contract minimum of 3 units. Delivery is required within 123 days after delivery order, and the contract may result in a one-year period of performance. The procurement is subject to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, with specific emphasis on configuration change management and qualified products lists. Inspection and acceptance will occur at the origin, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging must adhere to ASTM D3951 and MIL-STD-129. The award will be made to the responsible offeror whose quote is most advantageous to the government based on price and other factors. Compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements is mandatory.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-2708

Solicitation SPE7L1-27-T-2708 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of six O-rings under NSN 5331-01-515-0324. The requirement specifies that all items must be free of asbestos and cannot contain Class I ozone-depleting chemicals. Hardware must be manufactured according to the current revision of the applicable part standard. Delivery is required by March 8, 2027, with the place of performance and acceptance located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict packaging and quality standards, requiring items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Inspection and acceptance will occur at the destination, with sampling conducted according to MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Berry Amendment and Buy American Act. Evaluation preferences are provided for HUBZone Small Business Concerns, and offers utilizing additive manufacturing are ineligible for award.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

PUMP, FUEL, ELECTRICAL

Solicitation # SPE7M4-27-T-1936

Solicitation SPE7M4-27-T-1936, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of one electrical fuel pump, identified as a critical application item from Cummins Inc. with NSN 2910-01-605-5576. The requirement is managed under NAICS code 336310 and specifies a delivery timeframe of 20 days after order, with an original required delivery date of October 28, 2026. Shipping is designated as FOB Origin, with delivery locations in Italy and a parcel post address in the United States. The contract mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 for palletization. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and specific cybersecurity reporting standards under DFARS 252.204-7012. Quotes are to be submitted through the DIBBS portal.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-2854

Solicitation SPE7L1-27-T-2854 is a request for quotations from the DLA Weapons Support Land Supply Chain for the procurement of two O-rings, identified by NSN 5331-01-687-3913. The items are designated as critical application items and are to be delivered to the USS Cooperstown LCS 23 with an original required delivery date of October 26, 2026. Delivery is specified as FOB Destination, with inspection and acceptance also occurring at the destination. The procurement is governed by NAICS code 336310 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. Due to the potential for ultraviolet ray deterioration, the O-rings must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. General packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively. The items have a non-extendable shelf life of 180 months. The contract includes various federal and defense clauses, including requirements for safeguarding covered defense information, hazardous material identification, and the Buy American Act. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system. Quotations are due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

BURNER, FUEL PUMP

Solicitation # SPE8E6-27-T-0444

Solicitation SPE8E6-27-T-0444, issued by DLA Troop Support Construction and Equipment, is a small business set-aside for the procurement of 11 fuel pump burners under NSN 4230-01-524-6628. The items are to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of May 12, 2027, and a need ship date of April 26, 2027. The delivery window is specified as 167 days after award. Inspection and acceptance will occur at the point of origin, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331 with a zero-nonconformance requirement for acceptance. The contract imposes strict technical and regulatory requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates significant security and export controls, specifically RD002 for covered defense information and RQ032 for the export control of technical data under ITAR and EAR regulations. Contractors must comply with the Buy American Act and the Berry Amendment for domestic sourcing. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to NIST SP 800-171 and CMMC Level 2 cybersecurity standards. Price evaluation preferences are available for HUBZone small business concerns, and the buy may be subject to automated award.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 12 hours ago

DEADLINE

COLLAR ASSEMBLY, VALVE

Solicitation # SPE7M2-27-T-0447

Solicitation SPE7M2-27-T-0447 is a request for quotations issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of eight valve collar assemblies, identified by NSN 4820013625883. This critical application item, specifically Curtiss-Wright Electro-Mechanical part number 12575F18, is subject to a delivery window of 167 days, with a need ship date of April 26, 2027, and an original required delivery date of March 7, 2028. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement includes strict technical and quality requirements, prohibiting the intentional addition of mercury or mercury-containing compounds and banning the use of additive manufacturing unless specifically authorized. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. This is not a small business set-aside, and offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7M0-27-T-0813

Solicitation SPE7M0-27-T-0813 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of two O-rings (NSN 5331-01-669-5446). The requirement is under NAICS code 336310, with a delivery timeline of five days after receipt of order and a required delivery date of October 26, 2026. Delivery is FOB Origin to the Naval Facility in Everett, Washington, with both inspection and acceptance occurring at the destination per FAR 52.246-1. The contract mandates strict adherence to technical and quality requirements, including supply chain traceability documentation and the prohibition of asbestos and class I ozone-depleting chemicals. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 for UV protection, while marking must follow MIL-STD-129 with a specific shelf-life code. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold. All quotations must be submitted through the DIBBS portal by November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

ADJUSTING, SCREW VAL

Solicitation # SPE7MC-27-T-1311

Solicitation SPE7MC-27-T-1311 is a small business set-aside fixed-price contract issued by the Defense Logistics Agency for the procurement of one copper alloy end item angle valve, specifically an adjusting screw valve. The requirement identifies the item under NSN 4820-01-486-4802, referencing Dante Valve Company part numbers B4024 and D4000FF. The item is designated as a critical application item and must be delivered FOB Destination to the USS Makin Island (LHD 8) at FPO AP 96672. The original required delivery date is June 25, 2026, with a delivery lead time of 20 days after award. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and prohibits the intentional addition of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment, and compliance with the Buy American Act and DFARS cybersecurity and telecommunications regulations.

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

MIL-STD Packaging and Logistics ServicesThis subcontract for MIL-STD Packaging and Logistics Services supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves providing specialized military-grade packaging and palletization services, ensuring all items are processed according to MIL-STD-129, RP001, and ASTM D3951 standards. The provider must utilize compliant labeling and industrial equipment to deliver shipments that are fully prepared for FOB Origin transport. The project is managed under NAICS code 561910 for the Department of Defense and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.

Packaging and Labeling Services

POSTED

about 12 hours ago

DEADLINE

Safety Cone Supplier (NSN 6250-00-334-6183)This subcontract involves the procurement of 589 safety cones to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for manufacturing or sourcing cones identified by NSN 6250-00-334-6183, ensuring all materials strictly adhere to the DLA Master List of Technical/Quality requirements and comply with the Buy American Act. The completed order of 589 safety cones must be delivered FOB Origin to Phoenix, Arizona. This requirement falls under NAICS code 339999 and is managed by the Department of Defense for the Defense Logistics Agency.

All Other Miscellaneous Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Toggle Switches (NSN 5930-00-655-1507)This subcontract involves the supply of 11 toggle switches for prime contractors supporting Defense Logistics Agency contracts. The switches must strictly adhere to NSN 5930-00-655-1507 specifications, with a specific prohibition against the use of additive manufacturing. All items must be delivered FOB Destination and must comply with packaging and marking standards established by MIL-DTL-28786, MIL-STD-129, and RP001. The contractor is required to maintain rigorous cybersecurity and data protection standards, specifically ensuring compliance with NIST SP 800-171 and DFARS 252.204-7012. This procurement falls under NAICS code 334419 and is managed through the Department of Defense.

Other Electronic Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

Domestic Electrical Component Supply (Berry Amendment Compliant)This subcontract involves the supply of raw wire, connectors, shielding, and housing for prime contractors working on Defense Logistics Agency procurement projects specifically for NSN 5995-01-696-1261. The provider is responsible for sourcing electrical grade materials that meet strict technical requirements and must include a Certificate of Conformance with all delivered components. A critical requirement of this agreement is the provision of certification of origin to ensure full compliance with the Buy American Act and the Berry Amendment. Managed under NAICS code 335131 for the Department of Defense, the contract ensures that all domestic electrical components meet the necessary federal standards for military application.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 12 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication and assembly of a special purpose electrical cable assembly, specifically NSN 5995-01-696-1261, for prime contractors working on Defense Logistics Agency procurement projects. The manufacturer is required to produce one completed, tested, and packaged assembly in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001), with a specific prohibition against the use of additive manufacturing. All deliverables must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards. This opportunity falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties must respond by November 5, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

Military-Spec Packaging and International Shipping (Guam)This subcontract through the Defense Logistics Agency involves specialized military packaging, marking, and international transportation services for prime contractors delivering supplies to Guam. The scope of work specifically requires the packaging of mufflers in accordance with ASTM D3951, marking per MIL-STD-129, and palletization following RP001 requirements. The selected provider must utilize the fastest traceable shipping methods to ensure delivery to the MESG One Detachment in Guam. This opportunity falls under NAICS code 488330 and is managed by the Department of Defense.

Navigational Services to Shipping

POSTED

about 12 hours ago

DEADLINE

Exhaust Muffler Supply (NSN 2990-01-566-4579)This subcontract involves the manufacture or procurement of one specialized exhaust muffler, identified by NSN 2990-01-566-4579, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The provider must ensure the product complies with DLA Master List of Technical and Quality Requirements RA001 and RQ011, while maintaining strict supply chain traceability documentation as specified in the contract terms. Managed under NAICS code 336390 for the Department of Defense, the agreement requires the delivery of a single completed unit. The solicitation was posted on October 28, 2026, with a response deadline set for November 4, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Sleeve Spacers (NSN 5365-01-566-4847)This subcontract involves the manufacture or sourcing of four sleeve spacer units, identified by NSN 5365-01-566-4847, to support prime contractors under a Defense Logistics Agency supply contract. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. Final delivery of the units is required at Fort Bragg, North Carolina. Strict adherence to technical specifications is mandatory, including packaging according to ASTM D3951, labeling per MIL-STD-129, and palletization following RP001 standards. The opportunity falls under NAICS code 332721 and is managed through the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

Mold Release Agent Supplier (NSN 8030-01-233-1265)This subcontract involves the supply of a specific mold release agent, identified by NSN 8030-01-233-1265, to support prime contractors fulfilling Defense Logistics Agency requirements. The supplier must provide one 5-gallon can delivered FOB Destination to Illinois and US APO AE. To ensure product integrity, the agent must maintain a 12-month shelf life and be stored at temperatures between 60 and 80 degrees Fahrenheit. The contractor is required to adhere to strict regulatory and military standards, including compliance with the Buy American Act, the Berry Amendment, and 29 CFR 1910.1200. Additionally, all shipments must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. This procurement falls under NAICS code 325998 and is managed through the Department of Defense.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Refractory Castable Mix (NSN 9350015694317)This subcontract involves the supply of refractory castable mix to prime contractors supporting Defense Logistics Agency contracts for the USS George H W Bush and USS Abraham Lincoln. The provider is responsible for manufacturing or sourcing material that meets NSN 9350015694317, with strict requirements for packaging according to MIL-STD-2073-1E and marking per MIL-STD-129. The agreement mandates full compliance with the Buy American Act and the Hazard Communication Standard. The scope of work requires the delivery of two units of castable mix on a FOB Destination basis. This procurement falls under NAICS code 327120 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 9, 2026.

Clay Building Material and Refractories Manufacturing

POSTED

about 12 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Headlight Unit Manufacturing and Supply

Defense Logistics Agency

POSTED

CLOSED

Flywheel Engine Manufacturing and Supply

Defense Logistics Agency

POSTED

DEADLINE

Manufacture of Transmission Fluid Cooler (NSN 3040014429069)

LAND SUPPLY CHAIN

POSTED

CLOSED

Engine Water Pump Parts Kit Supply

Defense Logistics Agency

POSTED

DEADLINE

Oil Filter Parts Kit Supply

Defense Logistics Agency

POSTED

DEADLINE

PUMP, FUEL, METERING

Solicitation # SPE7L5-26-T-4468

LAND SUPPLIER OPNS ENGINES

POSTED

CLOSED

IMPELLER, PUMP, CENTRIFU

Solicitation # SPE7LX-26-U-8515

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

CLOSED

Solicitation # SPE7L5-26-T-4412

Defense Logistics Agency

POSTED

DEADLINE

Remanufactured Diesel Engine Supply

DLA Maritime - Portsmouth

POSTED

CLOSED

One RHD large sedan locally made official vehicle

Solicitation # 19TH2026Q0045

US Embassy Bangkok

POSTED

CLOSED

Solicitation # SPE7L5-26-T-4167

Defense Logistics Agency

POSTED

DEADLINE

Supply of Diesel Engine Parts Kit (NSN 2815016898829)

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS