Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

USFWS_KS_Great Plains NC_TITLE III ServicesI

Active
140FGA26R0032Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Fish and Wildlife Service is soliciting Architect-Engineer (A-E) Title III Construction Administration Services for the Great Plains Nature Center Renovation in Wichita, Kansas, under solicitation number 140FGA26R0032, with proposals due by September 7, 2026. The contract is a Firm-Fixed-Price award structured under FAR Part 36, emphasizing technical merit over price in a trade-off evaluation process where the most highly qualified firm will be selected based on key personnel qualifications, relevant project experience, and management capacity. Evaluation is driven by the SF330 form, requiring up to 15 resumes with strict two-page limits for each key position—Cost Engineer, Geotechnical Engineer, Project Manager, and Structural Engineer—all of whom must hold valid state licenses and possess a minimum of ten years of experience. The scope spans approximately 300 days, beginning in October 2026 and concluding by February 29, 2028, encompassing kick-off coordination, review of up to 25 RFIs and 200 submittals, weekly field inspections, commissioning support, and delivery of updated as-built drawings in .dwg and .pdf formats. All work must be performed onsite at the Great Plains Nature Center and supervised by a Kansas-licensed professional. The contractor assumes full liability for design errors regardless of government review, must adhere to ANSI Y-14 drafting standards and ASHRAE guidelines, and comply with NIST SP 800-171 for safeguarding federal contract information. Payment is managed exclusively through the Treasury’s Invoice Processing Platform (IPP), with invoices submitted to a designated Wichita address. Only small businesses are eligible under a total small business set-aside, requiring accurate size representations in SAM, including UEI and CAGE codes, and compliance with non-discrimination and employment verification clauses. Deviations from standard FAR clauses have been authorized for several provisions, including those related to DEI, computer forms, and SAM registration. The contracting officer, Thomas Ikner, and project inspectors from the Great Plains Nature Center provide oversight, with subcontractor personnel required to meet identical qualifications as prime team members and any personnel substitutions needing prior written approval. No pricing data is provided in the solicitation, and the contract value remains unspecified beyond the estimated construction cost range of $1M–$5M, which does not apply to the A-E services being procured.

General Info

USFWS seeks Title III services for Great Plains region via SAM.gov by Sept 7, 2026, open to all vendors.

Agency

Department Of The Interior → Sat Team 1 FwsView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

VA

Set-Aside

NONE

Documents

(3)

Great Plains Nature Center Foundation Rehab Drawings

PDFdrawings

IFB 140FGA26R0032 Great Plains Nature Center Renovations Title III Services

PDFifb

Title III Statement of Work for GPNC Visitor Center Construction Administration Services

PDFsow

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → Sat Team 1 Fws
Contacts1 person available
OfficeFalls Church, VA, 22041, USA
Organization / Agency
Department Of The Interior → Sat Team 1 Fws
View Agency Profile
Office AddressFalls Church, VA, 22041, USA

Full Description

Show more
USFWS_KS_Great Plains NC_A-E Title III Services

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT
Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water
GHD Inc. is soliciting qualified subcontractors to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County, California, with a focus on engaging Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other eligible firms under SBA set-aside programs. The scope of work encompasses a broad range of professional services including engineering, environmental consulting, surveying, geotechnical analysis, permitting, public outreach, and utility location, aligned with NAICS codes such as 541330 and others related to architectural and engineering services, construction, and regulatory support. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents by 5 p.m. PST on August 14, 2026, to receive full project details, with the formal response deadline for proposals set for September 15, 2026. All interactions and submissions should be directed to Charlie Brown at charles.brown@ghd.com, and performance is expected to occur within the service area of the Elsinore Valley Municipal Water District in Southern California.
GHD Inc.

POSTED

about 6 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Corydon Well Replacement (C2305)
Solicitation # C2305
Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under solicitation number corydon-well-replacement-c2305-1. The project entails designing a new municipal groundwater production well to replace and abandon the existing Corydon well, with work divided into two phases: Phase 1 includes technical specifications, civil site design, line-bid items for drilling and abandonment, bidding assistance, and full-time on-site construction management oversight in compliance with Riverside County and California State Water Resources Control Board requirements; Phase 2 involves detailed architectural, civil, mechanical, structural, electrical, and instrumentation and controls design drawings along with a line-item bid schedule for equipping, testing, and commissioning. The new well must meet AWWA standards, utilize a 24-inch diameter stainless steel Ful-Flo louvered screen, match existing vertical turbine equipment, tie into the Corydon Blend station and Malaga blending location, and comply with SWRCB-DDW, DWR, and EVMWD requirements. Key deliverables include a Preliminary Design Report at up to 30% design completion, review of approximately 200 submittals, assistance with a Domestic Water Supply Permit Amendment, and development of Record Drawings reflecting field changes alongside start-up and operator training support. The contract is governed by the Federal Acquisition Regulation with incorporated clauses including 2 CFR Subtitle A, Part 200, 2 CFR 1400 and 1401, DOI Standard Award Terms, and 48 CFR 52.203-17 for subawards over the simplified acquisition threshold. Respondents must complete mandatory certifications in Attachment “2,” including American Iron and Steel Certification, Debarment and Suspension Certification, SAM Information, Executive Order N-6-22 Certification, Conflict of Interest Disclaimer, Insurance Acknowledgment, Public Works Contractor Registration, and DBE Subconsultant Information. The RFP requires strict adherence to Build America Buy America Act compliance, including domestic-content documentation and waiver procedures for non-compliant materials, and prohibits procurement of equipment from Huawei or ZTE. The award will be based on demonstrated competence and professional qualifications, with evaluation factors weighted as follows: Relevant Qualifications/Experience (25%), Understanding of Project and Project Approach (25%), Scope of Work and Schedule (20%),
Ardurra Group, Inc.

POSTED

about 6 hours ago

DEADLINE

in 24 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # WO# C2305
The Corydon Well Replacement Project entails the design of a new municipal groundwater production well to replace and formally abandon the existing Corydon Well on Elsinore Valley Municipal Water District (EVMWD) property, with all work conducted in compliance with California State Water Resources Control Board and Riverside County regulations. The project is divided into two phases: Phase 1 focuses on hydrogeological evaluation, aquifer analysis, well design matching the existing casing depth and sanitary seal standards per AWWA guidelines, civil and site engineering for wellhead facilities, bidding assistance, and full-time on-site construction management and hydrogeological oversight during drilling. Phase 2 involves engineering design for well equipping—including architectural, structural, mechanical, electrical, instrumentation, and controls systems—alongside support during bidding and ongoing engineering oversight during construction. Technical specifications require a 24-inch diameter stainless steel Ful-Flo louvered screen compatible with local geology, and all materials must comply with the Build America, Buy America Act and domestic content requirements under 2 CFR Part 184, with documented efforts to source U.S.-produced iron, steel, and manufactured products. The project spans from initiation in November 2026 through completion in May 2028, with a contract value not exceeding $1,000,000, partially funded by a $400,000 Bureau of Reclamation grant requiring adherence to federal administrative, audit, and procurement rules under 2 CFR Part 200. Proposals must include detailed qualifications, resumes of key personnel, relevant municipal water and groundwater project experience, current California professional licensure, DBE subconsultant participation details, and a comprehensive cost proposal broken down by task with hourly rates and incidental costs. Submissions must be made through EVMWD’s PlanetBids portal by the September 1, 2026 deadline and include mandatory certifications for debarment and suspension, lobbying compliance, American Iron and Steel compliance, executive order N-6-22 sanctions screening, insurance acknowledgment, and non-collusion declarations. Evaluation prioritizes demonstrated technical competence and experience (25%), followed by understanding of project objectives (25%), schedule and risk management (20%), innovation (10%), cost value (10%), and overall proposal quality (10%), with the award based on qualifications rather than lowest cost. The consultant must provide monthly progress reports, detailed invoices, and maintain full records for four years post-final payment subject to audit. All
GEI Consultants, Inc.

POSTED

about 6 hours ago

DEADLINE

in 24 days
View Details
NAICS: 541330
New
SLED
A/E RFQ - Ballistic Aero-Optics and Materials Range Phase 2 - Bryan, Texas
Solicitation # TAMUS-RFQ-01-3489
The Texas A&M University System Office of Facilities Planning & Construction is seeking qualified Architect/Engineer firms to provide professional services for the Ballistic Aero-Optics and Materials Range Phase 2 project at the RELLIS Campus in Bryan, Texas. This solicitation, identified as TAMUS-RFQ-01-3489, is issued on behalf of the Board of Regents and seeks statements of qualifications to select a firm capable of delivering comprehensive design and engineering services tailored to the unique technical and operational demands of the ballistic range facility. Proposals must demonstrate relevant experience, technical capability, and understanding of specialized infrastructure requirements associated with high-speed testing and materials research environments. The deadline for submissions is September 1, 2026, at 8:00 PM Central Time, with the solicitation posted on August 7, 2026. Interested firms should direct all inquiries to Jeff Herring, the primary point of contact, via email at jeffery.herring@tamus.edu or by phone at 979-458-7006. The project is classified under a state and local government (SLED) procurement and will be conducted in accordance with the terms outlined in the attached A/E RFQ Information Sheet. Although no specific NAICS code or set-aside designation is provided, eligibility is open to firms meeting the qualifications outlined in the solicitation, with all work to be performed at the RELLIS Campus in Bryan, Texas.
Texas A&M University System

POSTED

about 11 hours ago

DEADLINE

in 24 days
View Details
NAICS: 541330
New
SLED
Architectural Engineering Services for Texas Department of State Health Services (DSHS) Public Health Laboratory (DPHL2)
Solicitation # 0006457
The Texas Facilities Commission (TFC) is soliciting qualified architectural and engineering firms to provide prime professional services for the design of the new Department of State Health Services Public Health Laboratory 2 (DPHL2) in Austin, Texas. The project, funded by the Texas 89th Legislature, involves the design and construction of a 220,000-square-foot state-of-the-art laboratory facility adjacent to the existing campus, comprising 200,000 GSF of BSL-1 and BSL-2 spaces for newborn screening and a separate 20,000 GSF BSL-3 facility. The estimated construction cost is $200 million, and the total project duration is anticipated to be 1,460 calendar days. Services must begin within ten calendar days of a Notice to Proceed and include full lifecycle A/E services from program development through construction administration, with deliverables such as schematic and construction documents, BIM models, energy compliance statements, and as-built records. The work requires close coordination with DSHS, TFC’s Project Management Firm (Kitchell CEM), the Construction Manager at Risk, and multiple stakeholders to deliver a technically complex, flexible, and future-ready facility supporting the state’s public health infrastructure. Proposals must be submitted electronically via the OpenGov portal by 3:00 PM on September 4, 2026, with mandatory pre-submittal teleconferences scheduled for August 18 and 19, 2026, attendance at which is required for eligibility. Submissions must include three packaged components: required documentation, VetHUB subcontracting plan materials, and scored documentation covering company information, experience, methodology, and quality assurance. Evaluation is based on a best-value approach with 70 points allocated to relevant experience and qualifications, 20 to methodology, and 10 to quality assurance, while mandatory pass/fail criteria include company information, litigation history, and a TFC-approved HUB subcontracting plan. Additional special requirements include pre-approval of key personnel, criminal background checks for all personnel, prohibition of boycotts of energy companies and firearm entities, affirmation of non-affiliation with foreign adversaries, and compliance with Texas-specific codes including CLIA, ADA, and energy conservation standards. Contract execution is planned for November 1, 2026, with award anticipated by October 15, 2026, following a potential interview process for shortlisted firms,
Texas Facilities Commission

POSTED

about 16 hours ago

DEADLINE

in 27 days
View Details

More opportunities from Department Of The Interior → Sat Team 1 Fws

Same awarding agency

NAICS: 493190
New
Federal
ID-KOOSKIA NFH-FORMALIN STORAGE BLDG
Solicitation # 140FS126Q0142
The contract award is for the supply and delivery of one fully assembled outdoor chemical storage locker, specifically designed for formalin storage, to be installed at the Kooskia National Fish Hatchery in Idaho. The unit must meet stringent technical specifications including a 272-gallon leak-tight sump, 12-gauge galvannealed steel construction, UV and chemical-resistant paint, UL-classified locking door, natural draft ventilation, static grounding, and compliance with NFPA 30, FM Approval, OSHA secondary containment standards, EPA regulations, and ASTM, AISI, and AWS manufacturing standards. Delivery is due no later than December 1, 2026, under FOB Destination terms, meaning the contractor bears all costs and risks until the unit is delivered and accepted at the hatchery’s location. The contract is structured as a firm-fixed-price award under FAR Part 12 using a Lowest Price Technically Acceptable evaluation method, where technical acceptability is determined before price, and the technical capabilities and past performance of the offeror are deemed significantly more important than cost. The solicitation requires a three-part proposal with technical, past performance, and pricing volumes, and mandates identification of key personnel, with no page limits specified but full responsiveness required. The contractor must comply with extensive federal regulatory and compliance clauses, including provisions on whistleblower rights, contractor ethics, prohibition of restrictive internal confidentiality agreements, restrictions on subcontractor sales to the government, personal identity verification for facility access, and specific DEI anti-discrimination requirements under deviation clauses issued in March 2026. Payment will be processed electronically via the Invoice Processing Platform (IPP), with no use of WAWF, and all invoices must be submitted through the IPP portal. The contracting officer technical representative is Kurt McCorkle, with Richard Marshall serving as the primary point of contact for submissions. Only small business entities are eligible to respond, as the NAICS code 493190 is set aside in full for small business participation, and all offerors must maintain an active SAM registration with a valid UEI. The contract includes optional features such as pre-wired electrical systems, insulation, lighting, and explosion relief panels, though pricing for these options is not specified and will be evaluated for reasonableness and balance. No packaging, preservation, or marking details beyond general compliance with carrier or contract specifications are provided, and the government will provide no assistance during installation. The contract’s estimated value ranges from $0 to $36.5 million
Other Warehousing and Storage

POSTED

3 days ago

DEADLINE

in 6 days
View Details