Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

USS HOWARD (DDG-83) 7J1

Active
N6264926RA063Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy, through the Naval Supply Systems Command Fleet Logistics Center Yokosuka, is preparing to issue a presolicitation for the USS HOWARD (DDG-83) 7J1 under solicitation number N6264926RA063, with an anticipated RFP release on or about July 31, 2026. The solicitation will be accessible exclusively through SAM.gov, and all amendments will be posted there as well. This procurement carries no set-aside designation and falls under NAICS code 336611, pertaining to shipbuilding and repairing. The primary point of contact is Risa Sakurai, reachable via email at risa.sakurai.ln@us.navy.mil or phone at 0468168400, with Peter Arrieta designated as the secondary contact. Responses are due by July 31, 2026, at 1:00 AM UTC, and while the place of performance details are unspecified, the office is located in FPO, AP, with a postal code of 96349-1500. All interested parties must monitor SAM.gov for official documents and updates.

General Info

U.S. Navy seeks shipbuilding services for USS HOWARD via SAM.gov, RFP due July 31, 2026, NAICS 336611, no set-aside.

Agency

Department Of Defense → Navsup Flt Logistics Ctr YokosukaView Agency

NAICS

336611 - Ship Building and RepairingView NAICS

Place of Performance

AP

Set-Aside

NONE

Documents

(18)

Attachment III - Request for Information Sheet

DOCX1 pagerfi

N6264926RA063 USS Howard FY27 SIA 7J1 Solicitation

PDF49 pagesrfp

TGI Temporary Staging SF TST A 0 for DDG-83 USS Howard

PDFsow

TGI 38JC363403A01-CH1/2: Replace Stuffing Tube and Nonskid System

PDFtask-group-instruction

ICN 38JC349201 A01 TGI – Flush Cover Plate and ISD Foundation

PDFsow

Attachment 3 - Government Furnished Property (GFP/GFM) Listings

XLSX9654 pagessow

N6264926RA063 Attachment VII QASP for USS Howard SIA 7J1

PDF5 pagesqasp

38JC312304 A01 TGI - Bulkhead Plate Repair, DDG-83 USS Howard

PDFsow

Attachment VIII - Contract Data Sheet

PDF1 pageother

38JC363404 A01 Task Group Instruction - Replace Nonskid System

PDFsow

TGI 02LVL WEA FR 333-396 AY A 0 - Ship repair instructions

PDFsow

Pre-Solicitation Notice N6264926RA063 for USS HOWARD Ship Repair

PDF2 pagespresolicitation

Attachment (VI) Source of Repair Instruction

PDF1 pageother

38JC363401 A01 TGI - Preservation of Array Antenna Enclosure

PDFsow

TGI EQT IN 4-126-0-E, USS Howard DDG-83 Repair Instruction

PDFsow

N6264926RA063 Price Proposal Form

XLSX11 pagesprice-proposal-form

38JC386401 A01 TGI - Temporary Utility Service Work

PDFsow

Attachment (V) Warranty Tracking Information

PDF1 pageother

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhasePresolicitation
Posted

Presolicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Yokosuka
Contacts2 people available
OfficeFPO, AP, 96349-1500, USA
Organization / Agency
Department Of Defense → Navsup Flt Logistics Ctr Yokosuka
View Agency Profile
Office AddressFPO, AP, 96349-1500, USA

Full Description

Show more

This solicitation is intended only for sources duly authorized to operate and do business in Japan as prescribed by DFARS 252.225-7042.


1. REQUIREMENT: NAVSUP Fleet Logistics Center Yokosuka (NAVSUP FLCY) has a new requirement in support of the USS HOWARD (DDG-83). The repair and maintenance package of work items are included as Attachment (I) Work Specification(s) for TGIs.


2. PERIOD OF PERFORMANCE: From 30 Nov 2026 to 8 Mar 2027


3. PLACE OF PERFORMANCE: Commander, Fleet Activities Yokosuka (CFAY) Naval Base


4. OFFER: Offerors must provide all information required by this solicitation no later than 8 Oct 2026 at 10:00 AM Japan Standard Time (JST).


5. WORK ITEM INFORMATION: Access to the work specification package listed in Section J as Attachment (I) may only be accessed through DoD SAFE. DoD SAFE is a secure U.S. Government repository which enables the sharing of large files and requires outside users to receive a drop off request from the U.S. Government. Therefore, any offeror intending to provide a proposal to this solicitation shall request access by sending an email to: risa.sakurai.ln@us.navy.mil, peterjommel.s.arrieta.ln@us.navy.mil by 1 Oct 2026 10:00 AM JST. Once the U.S. Government receives the  offeror's access request, the U.S. Government will provide the offeror with a link and instructions to retrieve Attachment (I). Offerors shall note that access is only available for 14 days once sent.

Similar Contracts

Same NAICS industry code

NAICS: 336611
New
Federal
N0016426RLN04 Shipboard and Facility Installations of Special Warfare and Expeditionary Systems Department Technology Systems
Solicitation # N0016426RLN04
Solicitation N0016426RLN04 is a Cost-Plus-Fixed-Fee, Level of Effort procurement issued by the Naval Surface Warfare Center Crane Division. The contract provides for the Alteration Installation Team service requirements, which include shipboard and facility installations, integration, and support for Electro-Optical, Electronic Warfare, Command and Control, and Counter-Unmanned systems on United States Navy and Coast Guard vessels. The scope of work encompasses the full lifecycle of installation, including procurement of incidental materials, equipment fabrication, engineering, logistics, configuration management, and both pre- and post-installation support. Performance is conducted worldwide at CONUS and OCONUS maritime facilities, shipyards, and ashore sites. The contract structure consists of a base year and four option years, with labor requirements estimated at 73,765 hours per year. Work is distributed across several key locations, with the highest concentrations in Norfolk, VA and San Diego, CA, followed by Bangor/Bremerton, WA, Kings Bay, GA, Crane, IN, and company headquarters. The government will evaluate proposals based on three factors, with Technical approach being the most important, followed by Past Performance and Cost. Key personnel requirements include a Program Manager IV with a bachelor's degree and 10 years of Navy repair and installation experience. Contractors must maintain a quality management system adhering to ISO 9001:2015 and comply with specific NAVSEA and OSHA safety standards.
Nswc Crane

POSTED

about 8 hours ago

DEADLINE

in 27 days
View Details
NAICS: 336611
New
Federal
Overhaul - Barrier Boat
Solicitation # N3904026Q5666
Portsmouth Naval Shipyard (PNSY) is soliciting a firm-fixed-price contract for the depot-level overhaul, maintenance, repair, and preservation of one 30-foot barrier boat, identified as hull 30BB0701. The scope of work includes dry-docking, structural hull repairs, fendering, and comprehensive servicing of the propulsion, electrical, steering, and auxiliary systems, concluding with mandatory dock and sea trials. All work must be completed within three months from the date of award and delivery of the vessel to the contractor's facility. Performance will take place at PNSY in Kittery, Maine, and at the contractor's own facility, with certain portions of the work occurring within a NAVSEA Controlled Industrial Area. This acquisition is a 100% total small business set-aside, specifically targeting HUBZone and Service-Disabled Veteran-Owned Small Businesses. The government will award the contract based on best value, evaluating non-priced factors such as technical approach—including key personnel resumes and a sequential work plan—and past performance over the last three years. The contract includes a not-to-exceed ceiling of 35,500 dollars for over and above work. Strict compliance with Operations Security (OPSEC) and cybersecurity requirements is mandatory to protect sensitive information and controlled unclassified information. Quality assurance will be managed through a Quality Assurance Surveillance Plan (QASP) and a detailed matrix to monitor performance standards and acceptable quality levels.
Portsmouth Naval Shipyard Gf

POSTED

about 8 hours ago

DEADLINE

in 3 days
View Details
NAICS: 336611
New
Federal
USS MCCAMPBELL (DDG-85) EMERGENT MAINTENANCE (6EM), YOKOSUKA, Japan
Solicitation # N6264926RA055
Solicitation N6264926RA055 is an Invitation for Bid for emergent maintenance (6EM) on the USS MCCAMPBELL (DDG-85), to be performed at the Yokosuka Naval Base government facility. The scope of work includes providing all management, technical, procurement, production, testing, and quality assurance necessary to complete two specific Task Group Instructions (38CGA24101-A01 and 38CGA24101-T08) in accordance with NAVSEA and SRF-JRMC local standard items. The contract is structured as a firm fixed price job order, with the award made in Japanese Yen. Following several amendments, the final closing date for proposals is September 2, 2026, at 10:00 AM JST, and the revised period of performance is from December 14, 2026, through January 7, 2027. Eligibility is strictly limited to sources authorized to do business in Japan per DFARS 252.225-7042, and firms must possess an active U.S. Navy Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR) as a prime contractor to be eligible for award. The selection process follows the Lowest Price Technically Acceptable (LPTA) model, where price is the dominant factor provided the offeror meets all technical acceptability and responsibility gates. Key requirements include the use of WAWF for invoicing, compliance with strict security clearance and background investigation standards for personnel, and adherence to specific marking and labeling standards for government furnished property. Access to detailed work specifications is managed securely through DoD SAFE.
Navsup Flt Logistics Ctr Yokosuka

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Yokosuka

Same awarding agency

NAICS: 532490
New
Federal
Lease of Electric Forklift
Solicitation # N6264926QB083
Solicitation N6264926QB083 is a firm-fixed-price request for proposal issued by NAVSUP Fleet Logistics Center Yokosuka for the lease of three 3.0T electric forklifts to support the Puget Sound Naval Shipyard and Intermediate Maintenance Facility Detachment in Yokosuka, Japan. The contract is structured with a base year from September 29, 2026, to September 28, 2027, and two subsequent option years extending through September 28, 2029. The equipment will be deployed at Building 1235 (one unit) and Building 5230 at Berth 12 (two units). The contractor is responsible for delivery, removal, and all scheduled maintenance and repairs to ensure the forklifts remain in peak operational condition. Technical requirements specify that each unit must include a dedicated charging cable and compatible charger, dual rear-view mirrors, turn signals, and an active acoustic backup buzzer, with a high preference for onboard load weight indicators. All operating controls must be labeled in English, and each unit must be provided with operator manuals in both English and Japanese. Marking requirements include the gross vehicle weight, capacity, and the designation USN in five locations using characters at least three inches in height. This solicitation is restricted to sources authorized to operate in Japan per DFARS 252.225-7042, and prime contractors outside of Japan must provide proof of incorporation. Offers are due by September 11, 2026, and will be evaluated based on technical capability and the lowest price quote. Award will be made to the responsible offeror most advantageous to the government, with the total evaluation price including all option years. Invoicing must be processed through the Wide Area WorkFlow system, and payment will be made via Electronic Fund Transfer.
Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

about 8 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
Federal
Fabrication and Installation of Front Seat Isolation Barriers for Four (4) Toyota RAV4 Vehicles at Naval Air Facility Atsugi Security Department
Solicitation # N6264926QJ017
This Request for Quotations (RFQ) is for the custom fabrication and installation of four front-seat isolation barriers for government-owned Toyota RAV4 vehicles at Naval Air Facility (NAF) Atsugi, Japan. The project is being conducted under FAR Part 12 commercial item procedures as a single firm-fixed-price purchase order. The scope of work includes the de-installation of obstructing OEM components, round-trip transportation of vehicles to the fabrication facility via commercial carrier or trailer, and the installation of cages featuring high-strength or standard steel tubing, scratch-resistant polycarbonate, and custom side filler panels compatible with OEM airbag deployment. Per Amendment 0001, the requirements now include a rear seat isolation wall and rear window protection mesh, and a powder-coated finish is mandatory as solvent-based coatings are prohibited. The period of performance is 250 calendar days after the date of award. To be eligible for award, offerors must be authorized to do business in Japan, maintain active registration in the System for Award Management (SAM.gov), and complete a mandatory site visit to verify vehicle dimensions. The solicitation closing date is September 8, 2026, at 11:00 AM JST. Award will be made on an all-or-none basis to the responsible quoter representing the best value, based on technical capability, past performance, and price reasonableness. Contractors must also comply with DFARS item identification and valuation requirements and utilize the Wide Area Workflow (WAWF) system for invoicing.
Other Motor Vehicle Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS