Top

(UTIL) BARGO NEIGHBORHOODS REPLACE SEWER MAINS & MANHOLES (CNIC)

Forecast

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

The Bargo Neighborhoods Replace Sewer Mains and Manholes project, managed by Navfac Southeast for the Department of the Navy, is a design-build contract focused on upgrading the existing sanitary sewer system to meet current UFC construction standards. The scope of work involves the excavation and replacement of approximately 6,800 linear feet of sewer mains using HDPE piping, along with the complete replacement of all associated manholes. To ensure system integrity and prevent the inflow of rain and groundwater, the contractor must provide imported fill material, perform backfilling and compaction according to UFC specifications, install warning tape, and grout and seal all pipe entrances. Additional requirements include adjusting manhole cover elevations up to 2 inches above grade where necessary to prevent stormwater pooling. To maintain continuous service for the neighborhood, the contractor is responsible for providing sanitary sewer by-pass pumping throughout the construction process. The project falls under NAICS code 237110 and specifically addresses the replacement of mains while noting that existing house laterals are constructed of PVC.

General Info

Navfac Southeast design-build contract to replace 6,800 feet of sewer mains and manholes.

Agency

Department Of The Navy → Navfac Southeast

NAICS

237110 - Water and Sewer Line and Related Structures Construction

Place of Performance

USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseForecast

PostedJul 2

forecast

Prepare for this forecast

Research the agency, track this forecast, and prepare your capture plan before the solicitation opens.

Organization & Contact Information

AgencyDepartment Of The Navy → Navfac Southeast

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navfac Southeast

Office AddressN/A

ContactsNo contact information available

Full Description

Replace existing Sewer pipe with HDPE sewer pipe main along with the existing sanitary sewer manholes to bring the system up to current UFC standards of construction. The work shall include: Design build. Excavate and replace approximately 6,800 linear feet of sewer mains. Provide an imported fill material to be placed around the new sewer main piping. Backfill and compact IAW the UFC. Install warning tape. (maximum of 12 inches above new pipe). Excavate and replace all manholes. Grout and seal all pipe entrances into manholes to prevent inflow/infiltration of rain and ground water. If necessary, raise the manhole cover to an elevation of 2 inches above the existing grade to prevent storm water runoff from pooling on and around the covers. Provide sanitary sewer by-pass pumping as required to keep the system fully operational during the construction. Laterals from houses are PVC.