Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

V-Belt Supply (NSN: 3030017180096)

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract obligates the supplier to provide a single unit of a V-belt identified by National Stock Number 3030017180096, fully compliant with all military packaging, labeling, and hazardous materials documentation standards. The item is required for delivery to a military operational location designated as FPO with ZIP code 09532, and the supplier must adhere to strict defense supply chain protocols to ensure readiness and regulatory compliance. This is a subcontract under the NAICS code 332710, issued by the Department of Defense through its Land Supply Chain organization, with no set-aside provisions applied. The solicitation was posted on July 22, 2026, and responses must be submitted by August 3, 2026, creating a twelve-day window for proposal preparation and submission. The contract is accessible via the DIBBS platform, and while no point of contact is listed, all inquiries must be handled through the official procurement portal. The supplier must ensure that the V-belt meets all technical specifications associated with the NSN, including material composition, dimensional tolerances, and performance under military environmental conditions, with no exceptions permitted for packaging or labeling. Failure to comply with hazardous materials documentation will result in rejection of the offer.

General Info

Supplier must deliver one military-compliant V-belt NSN 3030017180096 to FPO 09532 by August 3, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

FPO, AE, 09532, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of one unit of a V-belt (NSN: 3030017180096) compliant with military packaging, labeling, and hazardous materials documentation requirements.

Similar Contracts

Same NAICS industry code

Precision Metal Shim ManufacturingThe contract requires the manufacture of 42 precision metal shims identified by NSN 5365-00-942-1796, with all production activities—including machining, inspection, and packaging—strictly following Department of Defense technical specifications and military standards. The work must be completed in compliance with the NAICS code 332710, which covers other fabricated metal product manufacturing, and performance is to take place at a designated location in San Diego, California, with ZIP code 92136-3581. The solicitation is structured as a subcontract under the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, with a response deadline of July 30, 2026, and was posted on July 22, 2026. All deliverables must meet exacting quality and documentation requirements to ensure full alignment with military supply chain protocols.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Precision Manufacturing of Rotary FilesThe contract seeks the precise manufacture of rotary files adhering strictly to DLA specifications, demanding exacting control over material composition, dimensional tolerances, and performance benchmarks to ensure reliability and consistency under demanding operational conditions. Compliance with these technical requirements is non-negotiable, as the final products are intended for use within defense applications where failure is not an option. The solicitation was posted on July 22, 2026, with a firm response deadline of August 3, 2026, and is structured as a subcontract under NAICS code 332710, which classifies it within precision manufacturing of metal tools. Performance is required at the New Cumberland facility with a zip code of 17070-5002, and the contracting entity is the Department of Defense through its DDSP New Cumberland Facility. The contract underscores a high-stakes manufacturing environment where adherence to military-grade standards governs every phase of production, inspection, and delivery.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

Precision Machining of Clutch ComponentsThe contract involves the sub-tier precision machining of critical clutch components including pressure plates, diaphragm springs, and hubs, all manufactured to meet stringent military specifications. The work is classified as a subcontract under NAICS code 332710, which pertains to forged and stamped metal product manufacturing, and is solicited by the Department of Defense through its LAND SUPPLY CHAIN organization. Performance of the contract is required at the designated location in Anniston, Alabama, with a zip code of 36201-4199, indicating the need for localized production capabilities aligned with military logistics networks. Responses to the solicitation must be submitted by August 3, 2026, with the posting date initially set for July 22, 2026, leaving a narrow window for qualified subcontractors to prepare and submit proposals. There is no specified set-aside type, meaning the opportunity is open to all eligible contractors regardless of business size or status. The absence of a listed point of contact suggests that all communications and submissions must follow the procedural guidelines provided via the official DIBBS portal link. Compliance with exacting military standards is paramount, and success will depend on demonstrated ability to deliver high-precision, mission-critical components reliably and on schedule.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

PACKING ASSEMBLYThe contract is for the procurement of four packing assemblies identified by NSN 5330-01-430-0232 under solicitation SPE7L4-26-U-0989, with delivery required within 126 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling for simplified acquisitions. The supplier must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization, and packaging must comply with DLA packaging standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless expressly authorized by the specifications. All technical data associated with this item is subject to export controls under ITAR or EAR, and dissemination to foreign persons, including foreign national employees and subsidiaries, is restricted without prior authorization. Access to this controlled data is limited to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DOD training and the DLA export-controlled data questionnaire, and have received specific approval from the DLA controlling authority. The contract is issued by the Department of Defense through LSO Combat Vehicles and Armament, with primary point of contact Heather Kessler, and NAICS code 332710 applies.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 20 hours ago

DEADLINE

Compressor Rotor SLIQ ComponentThe contract is for the manufacture of a specialized compressor rotor component or qualification tool intended for use in E-2D engine rebuild operations, demanding stringent aerospace-grade material specifications and extremely tight dimensional tolerances to ensure performance and reliability under operational stress. This subcontract is part of a broader effort by the Naval Air Warfare Center Aircraft Division to support critical maintenance and sustainment activities for Navy aircraft systems, with the component playing a vital role in engine functionality and longevity. The opportunity was posted on July 22, 2026, with a firm response deadline of August 6, 2026, at 1:00 PM, and is classified under NAICS code 332710, indicating it falls under the precision forging and stamping industry sector. All work must be performed in accordance with defense procurement standards, though specific performance location and point of contact details are not provided. The contract is issued under the Department of Defense, with no set-aside designation specified, making it open to qualified subcontractors regardless of size or certification status.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Fuel Nozzle Flow Check FixtureThe contract is for the development and delivery of a precision fixture designed to validate the flow characteristics of fuel nozzles during engine overhaul and depot-level maintenance operations. This specialized tool is critical for ensuring the proper performance and reliability of fuel delivery systems in aircraft engines, supporting maintenance standards required by the Department of Defense. The fixture must meet exacting engineering specifications to accurately measure and verify fuel flow rates under conditions that simulate real-world engine environments, enabling technicians to identify defects or degradation that could compromise engine efficiency or safety. The contract is classified as a subcontract under NAICS code 332710, which pertains to industrial machinery and equipment manufacturing, indicating the technical and precision manufacturing nature of the work. It was posted on July 22, 2026, with a response deadline of August 6, 2026, suggesting a limited window for qualified vendors to submit proposals. The performing organization is the Naval Air Warfare Center Aircraft Division, a key component of the Navy’s aviation maintenance and engineering infrastructure. While specific delivery locations and points of contact are not provided, the work is expected to support national defense maintenance operations, requiring compliance with stringent quality and documentation standards typical of defense contracts.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Engine Test Cell AdapterThe contract involves the manufacture of a custom adapter component designed to interface engine systems during test cell operations at military depot facilities, specifically under the oversight of the Naval Air Warfare Center Aircraft Division within the Department of Defense. The component must meet precise engineering specifications to ensure safe, reliable, and accurate testing of aircraft engines in controlled environments, and the work is classified under NAICS code 332710, indicating it falls within the precision instrument manufacturing sector. This is a subcontract opportunity with a response deadline of August 6, 2026, and no set-aside provisions are specified, meaning all eligible contractors may compete without restriction based on business size or other classifications. The place of performance and delivery location are not explicitly defined in the provided details, but the nature of the work suggests that final integration and validation will occur at designated military test facilities under Navy oversight. The solicitation was posted on July 22, 2026, and offers a three-week window for interested parties to prepare and submit proposals. No point of contact information is provided within the public data, requiring potential bidders to access the official SAM.gov workspace link to obtain further technical requirements, drawings, compliance guidelines, and submission protocols. The scope demands advanced manufacturing capabilities including precision machining, materials validation, and adherence to defense-grade quality standards to support critical defense test operations.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Turbine Rotor Labyrinth Seals Checking FixtureThe contract calls for the design, fabrication, and delivery of a precision inspection fixture specifically engineered to verify the dimensional accuracy and alignment of turbine rotor labyrinth seals used in the maintenance of the E-2D engine. This fixture must meet stringent engineering tolerances to ensure reliable validation of seal integrity during service inspections, directly supporting maintenance operations critical to aircraft readiness and performance. The work is classified as a subcontract under NAICS code 332710, indicating it falls within the precision instrument manufacturing sector, and is being procured by the Naval Air Warfare Center Aircraft Division under the Department of Defense. The solicitation was posted on July 22, 2026, with a response deadline of August 6, 2026, at 1:00 PM, emphasizing a tight timeframe for proposers to submit technical and commercial offers. The place of performance and agency location details are unspecified, but the work is tied to naval aviation maintenance requirements and is expected to be performed by a qualified subcontractor with experience in precision fixture manufacturing for aerospace applications. No set-aside provisions are indicated, meaning the opportunity is open to all eligible vendors regardless of business size or classification.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

MLG/NLG Cycling FixtureThe Naval Air Warfare Center Aircraft Division is soliciting proposals under Firm Fixed Price terms for the manufacture, assembly, inspection, and delivery of Intermediate & Depot Level Peculiar Support Equipment kits for the V-22 aircraft, including both Domestic and Foreign Military Sales platforms. This solicitation, numbered N68335-26-R-1041 and titled V-22 MLG/NLG Cycling Fixture, is issued as a 100% Small Business Set-Aside under NAICS code 332710, requiring offerors to be certified small businesses with active SAM representations confirming status. Proposals must be submitted electronically through the Procurement Integrated Enterprise Environment by the July 22, 2026 deadline, and must include a signed SF-33, accurate pricing aligned with Section B CLINs, full representations and certifications via SAM, and copies of all applicable amendments. Access to the Government-furnished technical data package containing Controlled Unclassified Information requires prior verification of CMMC Level 2 (Self-Assessment) certification and a certified DD Form 2345 for export-controlled technical drawings, both of which are mandatory prerequisites for proposal eligibility. Failure to meet either requirement results in immediate disqualification. The contract requires compliance with stringent quality and packaging standards, including AS9100D certification at award and throughout performance, adherence to MIL-STD-129R and MIL-STD-130N for marking and Unique Item Identification, and ISPM-15 compliance for all wood packaging. All deliverables must be manufactured to Government-issued drawings and inspected at origin by DCMA before final acceptance at NAWCAD Lakehurst, NJ. Deliveries are due six months after award, covering eight distinct CLINs totaling 30 units across multiple V-22 variants, with FOB terms either Destination or Origin depending on the line item. Invoicing must be processed through the Wide Area Workflow system using required documentation such as DD-250s, and payments are subject to line item-specific proration. The solicitation includes numerous FAR and DFARS clauses governing cybersecurity, subcontracting, anti-kickback, whistleblower rights, and procurement integrity, with all proposals required to be unclassified. The Contracting Officer retains discretion over any deviations, and proposal submission through unauthorized channels, including email or DOD SAFE, will not be accepted unless PIEE is offline.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

CLAMP PLATESThe contract seeks the procurement of clamp plates under a total small business set-aside as defined by FAR 19.5, with the NAICS code 332710, issued by the Department of Energy through its contractor, Berkeley National Laboratory. The solicitation, numbered MG-07142026, was posted on July 15, 2026, and responses are due by July 24, 2026, at 3:00 PM Pacific Time. The requirement is for commercial products as defined in FAR 2.101, and offerors must respond based on the attached RFQ Rev. 1, which includes the exact production unit quantities and associated technical drawings and documents. The place of performance is in Berkeley, California, and all items must be new, free from counterfeit or suspect materials, and comply with applicable federal, state, and local regulations, including DOE and OSHA standards. Electrical components rated at 50 volts or higher must be NRTL-listed, labeled, and certified per OSHA Part 1910. Contractors must adhere to the Buy American Act as modified by DEAR 970.2570-1, and are subject to whistleblower protections, ethical conduct requirements, and prohibitions on contracting with restricted entities such as Kaspersky Lab. The subcontractor assumes full liability for packaging inadequacies and must clearly mark all packages with the university subcontract number and include an itemized packing list, with encouragement to use biodegradable materials. Quality assurance is governed by DOE O 414.1D, and the contractor must comply with the LBNL Health and Safety Manual and 10 CFR 851 for worker safety, including ensuring all personnel requiring site access complete General Employee Radiological Training. Inspection rights are reserved by the University at any time, and acceptance is not implied by inspection or payment; rejection of non-conforming items requires the contractor to correct defects at its own expense, and suspect or counterfeit materials may be impounded and payment withheld pending investigation. Payments are due 30 days after receipt of a properly prepared invoice, issued via check or electronic transfer at the University’s discretion, with full compliance to invoicing requirements mandatory to avoid payment delays.

Berkeley National Labor - DOE Contractor

POSTED

DEADLINE

Manufacturing & Services Acquisition (MASA) Manufacturing SupportThe contract N0017426R1003 for the Manufacturing & Services Acquisition (MASA) Manufacturing Support is a multiple-award, firm-fixed-price, indefinite-delivery indefinite-quantity (IDIQ) vehicle established to procure manufactured parts and assemblies through machine shop processes in support of military programs. The requirement spans five distinct task areas—Production Hardware, Research and Development Hardware (small business set-aside), Plating (small business set-aside), Electronics Assembly, and Advanced Machining—with a total estimated ceiling of $40 million shared among awardees. The solicitation is partially set aside for small businesses under NAICS code 332710, with Task 2 and Task 3 restricted to small business concerns while Tasks 1, 4, and 5 are open to all eligible parties. The period of performance runs from December 16, 2026, to December 15, 2031, with delivery schedules determined at the task order level under F.O.B. Destination terms. Offerors must demonstrate capability to perform at least 50% of the work with their own personnel or first-tier subcontractors and propose for at least one task area to be eligible for award. Proposals must be submitted electronically in three volumes—Technical, Past Performance, and Small Business Subcontracting Plan if applicable—with strict formatting, page limits, and a 240-day validity period. The Contract Data Requirements List (CDRL) DD Form 1423 A001-A010 and compliance with MIL-STD-130 and MIL-STD-129 for item identification and packaging are mandatory, and all deliverables must meet ANSI/ASQC Q9000 through Q9004 quality standards or equivalent. Cybersecurity requirements mandate CMMC Level 2 self-certification and implementation of DFARS 252.204-7012 for systems handling FCI or CUI, with System Security Plans and Plans of Action and Milestones to be made available for government review within 30 days of award. No classified information is anticipated, but OPSEC training per DoD Manual 5205.02-M and NSWC IHD 3070.3D is required, and Government Furnished Property will be provided for Task 3 performance. Invoicing must occur through Wide Area WorkFlow (WAWF), with mandatory email notifications to

Nswc Indian Head Division

POSTED

DEADLINE

53--PACKING ASSEMBLY

DLA Land And Maritime

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Specialized International Military Shipment and FPO DeliveryThe contract requires the specialized transportation and delivery of a military component to FPO AE 09587 under full compliance with Defense Logistics Agency and Department of Defense shipping protocols, specifying FOB destination delivery terms to ensure the item arrives at the designated military postal location without further liability to the vendor. All logistics must adhere strictly to DoD standards for authentication, tracking, packaging, and documentation, with no exceptions permitted for compliance, safety, or chain of custody. This is a small business set-aside subcontract under NAICS code 483110, open exclusively to certified small businesses, with solicitation posted on July 22, 2026, and responses due by August 3, 2026. The performance location is a military postal address in the FPO system, reflecting overseas delivery to a U.S. military installation without a standard civilian address. The contracting agency is the Land Supply Chain under the Department of Defense, and all activities must align with the stringent requirements governing military logistics, supply chain security, and international shipments through the DLA network.

POSTED

about 20 hours ago

DEADLINE

Military-Compliant Packaging, Labeling, and Hazard CommunicationThis contract requires the provision of certified packaging, hazard labeling, and Material Safety Data Sheet (MSDS) submission services to meet stringent compliance standards mandated by OSHA, MIL-STD, and the Defense Logistics Agency. All deliverables must align with federal military specifications to ensure safe handling, transportation, and storage of hazardous materials within Department of Defense supply chains. The work is to be performed at a military postal address in FPO with zip code 09587, and all documentation must adhere to DLA-specific formats and procedural requirements. The solicitation is a small business set-aside under the SBA program, specifically reserved for total small business concerns as defined by FAR 19.5, with a NAICS code of 541690 for other professional, scientific, and technical services. Interested parties must submit responses by the deadline of August 3, 2026, and the contract is structured as a subcontract under the Land Supply Chain division of the Department of Defense. Technical rigor, regulatory precision, and complete traceability in labeling and hazard communication are essential to meet performance expectations and avoid non-compliance penalties.

Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

Supply of Adjustable Linkage Component (NSN 2815011808438)The contract calls for the procurement and delivery of one adjustable linkage component identified by NSN 2815011808438, manufactured to meet military specifications and packaged in accordance with required defense standards. The item must be delivered FOB destination to USS SAN ANTONIO (LPD 17), with the place of performance listed as FPO, ZIP code 09587. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualify to respond, as defined by the SBA and FAR 19.5. The NAICS code 332998 applies, covering other fabricated metal product manufacturing, indicating the component is a specialized metal assembly not falling under more specific categories. The posting date is July 22, 2026, with a response deadline of August 3, 2026, leaving a three-week window for bids. The contracting activity is under the Land Supply Chain organization within the Department of Defense. While no specific point of contact or detailed office address is provided, the procurement is hosted via the DIBBS system, and interested parties must access the official solicitation page through the provided UI link. The requirement is singular and targeted, emphasizing precise compliance with military standards and delivery to an active naval vessel, indicating the component supports critical operational systems aboard the USS SAN ANTONIO.

Enameled Iron and Metal Sanitary Ware Manufacturing

POSTED

about 20 hours ago

DEADLINE

Cybersecurity Compliance and NIST SP 800-171 AssessmentThe contract requires the performance and documentation of a NIST Special Publication 800-171 assessment to ensure the safeguarding of covered contractor information systems. This effort is focused on evaluating and validating compliance with the security requirements outlined in NIST SP 800-171, which are designed to protect controlled unclassified information within nonfederal systems. The assessment must be thorough, methodical, and properly documented to demonstrate adherence to federal cybersecurity standards applicable to contractors working with the Department of Defense. The contract is categorized as a subcontract under NAICS code 541512, indicating it pertains to computer systems design services. It is issued by the Land Supply Chain under the Department of Defense, with a response deadline of August 3, 2026, and was posted on July 22, 2026. The scope centers exclusively on conducting the cybersecurity assessment and delivering the associated documentation; no implementation or remediation services are specified. The place of performance and point of contact details are not provided, suggesting flexibility in execution location and direct coordination to be established upon award.

Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

Domestic and International Freight LogisticsThe contract requires the arrangement of ocean transportation for supplies using U.S.-flag vessels, with strict adherence to domestic shipping regulations. If a U.S.-flag vessel is not available or feasible, the contractor must submit a formal waiver request accompanied by detailed justification outlining the reasons for the exemption. The work falls under NAICS code 488510, indicating it involves support activities for air and water transportation, specifically focused on freight logistics across domestic and international routes. The effort is part of a larger supply chain initiative managed by the Department of Defense through its Land Supply Chain office, ensuring critical materiel is moved reliably and in compliance with federal maritime laws. The solicitation is issued as a subcontract with no set-aside designation, open to qualified entities capable of executing complex logistical operations. Interested parties must respond by August 3, 2026, with all proposals submitted through the DIBBS portal prior to the deadline. Performance will be conducted globally as needed to support defense supply requirements, though no specific place of performance is designated. The contract emphasizes compliance with U.S. maritime statutes and demands rigorous documentation, particularly when waivers are pursued, to maintain transparency and accountability in the movement of government supplies via ocean transport.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract titled Hazardous Materials Handling and Labeling requires the identification, labeling, and documentation of hazardous materials used in manufacturing or packaging processes under a subcontract arrangement. It is associated with the NAICS code 541620 and falls under the Department of Defense’s LAND SUPPLY CHAIN organization, indicating its relevance to defense supply chain operations. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, requiring timely submission of proposals that meet precise compliance standards for hazardous material management. The place of performance and point of contact details are not specified, suggesting the work may be conducted at multiple or undefined locations consistent with broader defense logistics requirements. All activities must align with federal regulations governing hazardous material handling to ensure safety, traceability, and regulatory adherence across the supply chain.

Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

Packaging and Marking Compliance ServicesThe contract seeks providers to deliver packaging, labeling, and marking services aligned with military standards for government shipments, ensuring all materials meet stringent defense logistics requirements. Services must comply with applicable regulations to support the safe, secure, and traceable transport of defense-related supplies across global operational environments, with performance anticipated to be conducted in coordination with Department of Defense logistics networks. The solicitation is classified as a subcontract under NAICS code 561910, indicating the work falls within other support activities for transportation, and is open to qualified subcontractors responsive to the needs of the Land Supply Chain organization. Bidders must submit proposals by the deadline of August 3, 2026, with the solicitation issued on July 22, 2026, through the DIBBS platform. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors regardless of size or certification status. The place of performance and direct point of contact information are not provided in the posting, suggesting logistical coordination will be handled through established government channels or upon contract award. Interested parties must review the full solicitation via the provided DIBBS link to access detailed technical specifications, compliance documentation, and submission instructions required for qualification.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Hardware Manufacturing and AssemblyThe contract calls for the manufacture and assembly of a mounting bracket in strict accordance with military specifications and approved engineering drawings. The work is classified as a subcontract under NAICS code 332510, indicating it falls within the industrial machinery and equipment manufacturing sector, with performance expected to meet rigorous defense standards. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, with the procuring agency identified as the Department of Defense through its LAND SUPPLY CHAIN office. Although specific location details for performance or contact information are not provided, the requirement is linked to the DIBBS platform, indicating federal procurement oversight and adherence to defense supply chain protocols. All deliverables must comply precisely with military drawing requirements, ensuring interoperability, durability, and reliability under operational conditions.

Hardware Manufacturing

POSTED

about 20 hours ago

DEADLINE

Logistics & Transportation to DLA FacilityThis contract requires transportation of goods under FOB origin terms to the DLA Distribution Depot in New Cumberland, Pennsylvania, with full compliance to MIL-STD-129 for packaging and marking standards. All shipments must integrate seamlessly with the Web Automated Workflow system to ensure accurate tracking and receipt processing. The opportunity is structured as a subcontract and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision, meaning only certified small business concerns may submit proposals. The NAICS code 484220 classifies this as a freight transportation arrangement, specifically trucking services. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and performance will be centered at the designated DLA facility with a zip code of 17070-5002. The contracting entity operates under the Department of Defense’s Land Supply Chain, and all bidders must access the full solicitation details through the provided DIBBS link.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Quality Assurance & Inspection ServicesThis contract entails comprehensive quality assurance and inspection services requiring strict adherence to MIL-STD-1916 or ASQ H1331 standards for both in-process and final inspections, with a mandatory zero non-conformance requirement for all delivered items. Successful performance demands rigorous quality control throughout production to ensure absolute compliance, coupled with timely reporting via the Web-based Automated Workflow (WAWF) system to maintain transparency and traceability. The solicitation is a subcontract under a Total Small Business Set-Aside designation, specifically reserved for small businesses as defined by SBA regulations under NAICS code 541380, which covers other scientific and technical consulting services. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the procurement is managed by the Department of Defense through its Land Supply Chain office. Interested parties must submit responses by the deadline of August 3, 2026, with the solicitation originally posted on July 22, 2026, and the full details accessible through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 20 hours ago

DEADLINE

Packaging, Preservation & Labeling ServicesThis contract requires comprehensive packaging, preservation, and labeling services strictly in accordance with military standards MIL-STD-2073-1E and MIL-STD-129, ensuring all items are properly protected, preserved, and marked for military logistics and handling. All packaging must include orientation markings and compliant barcoding to support accurate tracking and identity verification throughout the supply chain. The solicitation is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the NAICS code 561990 indicating it falls under Other Support Activities. Performance of the work is mandated at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The proposal submission deadline is August 3, 2026, with the solicitation posted on July 22, 2026, and is managed by the Department of Defense through the Land Supply Chain organization.

All Other Support Services

POSTED

about 20 hours ago

DEADLINE

Commercial Item Supply & Integration (Specialized Components)The contract awards the supply of 10 commercial units at $8,400 each and 2 specialized units at $12,300 each, all required to meet DLA quality and compliance standards for specialized components. This is a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses as defined by the SBA, with the NAICS code 423830 indicating a wholesale trade focus on miscellaneous durable goods. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and the performance location is specified as New Cumberland, PA, 17070-5002. The contract is managed by the Land Supply Chain organization under the Department of Defense, and all deliveries must adhere strictly to federal procurement guidelines and DLA-specific compliance requirements.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE