Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Vacuum Bleed Filter Supply (NSN: 2990-01-513-6153)

Active

Federal

Response Deadline07/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the supply of thirteen Vacuum Bleed Filters with part number 23055917-28 and national stock number 2990015136153, manufactured to meet stringent Department of Defense technical, quality, and traceability standards for use in critical aerospace systems. All units must comply with exacting performance and documentation requirements to ensure reliability and safety in high-stakes operational environments. The procurement is classified as a subcontract under NAICS code 332996, indicating it falls under other miscellaneous manufacturing. Performance is required at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026, with the contract awarded by the Land Supplier Operations Engines division under the Department of Defense. Interested parties must submit proposals through the designated DIBBS portal before the deadline to be considered.

General Info

Thirteen vacuum bleed filters for DoD aerospace use, due July 29, 2026, in New Cumberland, Pennsylvania.

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineJul 29

Submission deadline

Response Deadline

07/29/2026, 05:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINES

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 13 units of a Vacuum Bleed Filter (P/N: 23055917-28, NSN: 2990015136153) meeting DLA technical, quality, and traceability requirements for critical aerospace applications.

Similar Contracts

Same NAICS industry code

28--LEVER PLATE SPECIALThe Government is seeking to procure three units of the NSN 1H-2825-014815072-X3, identified as a 28–LEVER PLATE SPECIAL, under a sole-source contract authorized by FAR 6.302-1 due to the unavailability of competitively sourced alternatives. The Government does not own or have access to the technical data rights necessary to procure repairs or replacements from other sources, and both acquiring those rights and reverse engineering the part have been deemed uneconomical. Deliveries are required to two designated locations: W25G1U at DLA Distribution in New Cumberland, Pennsylvania, and W62G2T at DLA Distribution in Tracy, California. Although this notice is not a request for competitive bids, interested parties may submit capability statements or proposals within 45 days of the publication date, or 30 days if awarded under an existing Basic Ordering Agreement, to be considered for award. The Government reserves the right to determine whether competition is feasible based on submissions and will only award if the offeror, product, or manufacturer meets all qualification requirements at the time of award, as per FAR clause 52.209-1. Market research confirms that the acquisition does not fall under FAR Part 12 commercial item procedures, though vendors may still indicate if they can provide an equivalent commercial item within 15 days of notice. All inquiries and qualification details must be directed to the primary point of contact, Melissa A. Farness, at NAVSUP Weapon Systems Support Mech in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Mechanical Seal and Gasket SupplyPetrojam Limited, acting on behalf of the Government of Jamaica, has issued a subcontract for the supply of high-performance mechanical seals, O-rings, gaskets, and sealing materials designed specifically for use in pump systems operating in petroleum and chemical service environments. The contract is classified under NAICS code 332996, indicating it pertains to other fabrication industries related to machinery and components, and emphasizes the need for durable, chemically resistant, and high-pressure-rated sealing solutions that meet the rigorous demands of industrial processing and offshore operations. All materials must be fully compatible with aggressive fluids, elevated temperatures, and continuous operational conditions typical in energy and petrochemical applications. The contract was posted on July 25, 2026, and is accessible via the Government of Jamaica’s electronic procurement portal, with no set-aside or small business preferences indicated. Performance is expected to support operations within Jamaica’s energy infrastructure, though specific delivery locations or performance metrics are not detailed in the available data. Contractors must ensure compliance with industry standards for material integrity, leakage prevention, and long-term reliability, with no point of contact listed for inquiries, suggesting all communications must be handled through the official e-procurement platform linked in the notice.

Petrojam Limited

POSTED

DEADLINE

Manufacturing of Quick Disconnect Coupling Half (NSN 4730-01-399-0241)The contract entails the full-scale manufacturing of a military-specification quick disconnect coupling half, adhering strictly to Army Drawing 19207-12342947 and SQAP013990241, ensuring compliance with all defense-grade quality and performance standards. Production must encompass not only the fabrication of the component but also integrated surge and sustainment planning to support long-term operational readiness and logistics requirements for the U.S. military. The item is designated by NSN 4730-01-399-0241 and falls under NAICS code 332996, indicating specialized manufacturing within the defense supply chain. This is a subcontract opportunity issued by LAND SUPPLIER OPERATIONS SMSG under the Department of Defense, with a response deadline of August 23, 2026, and a posted date of July 24, 2026. The contract does not specify a set-aside designation, meaning it is open to all eligible contractors, and no point of contact or place of performance details are provided. All production activities must meet rigorous military specifications, and successful proposers are expected to demonstrate capacity for consistent, high-volume output, quality assurance, and supply chain reliability to sustain operational needs over time.

LAND SUPPLIER OPERATIONS SMSG

POSTED

DEADLINE

Defense-Grade O-Ring Supply and DeliveryThe contract requires the manufacture or procurement, packaging, and delivery of 130 defense-grade O-rings identified by NSN 5331015349099, meeting exact military specifications for use by the Department of Defense. The delivery must be made FOB origin to DLA New Cumberland, with a strict deadline of 161 days from the date of order issuance. The procurement is categorized as a subcontract under NAICS code 332996, indicating a specialized manufacturing process aligned with defense standards. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, 17070-5002. All work must ensure full compliance with defense-grade requirements and be completed within the established timeline to satisfy operational needs.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling (Supplier Opportunity)The contract requires suppliers to provide PIN-RIVET hardware components that meet stringent military packaging and labeling standards, ensuring full compliance with federal regulations for hazardous materials. All shipments must include accurate hazardous materials disclosures and proper GHS labeling where applicable, aligning with Department of Defense requirements for safety and traceability throughout the supply chain. The components are destined for performance at Hill Air Force Base with a zip code of 84056-5734, and the supplier must be prepared to comply with all technical, documentation, and logistical specifications tied to military-grade procurement. This subcontract opportunity is open for response until July 29, 2026, and falls under NAICS code 332996, indicating it involves other fabricated metal product manufacturing. The contracting office is the ASC Commodities Division under the Department of Defense, and while no set-aside designation is specified, the solicitation is publicly accessible via the DIBBS platform. Suppliers must ensure their capabilities include not only manufacturing or sourcing compliant hardware but also rigorous adherence to labeling, packaging, and disclosure protocols as mandated by military standards, with no flexibility for non-compliant deliveries.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Filter Assembly and ManufacturingThe contract requires the manufacture and assembly of a RETURN FILTER ASSY with National Stock Number 1680-01-583-4352, following authorized source specifications tied to CAGE code 18350 and part number CE01233F1. This includes end-to-end production responsibilities such as sourcing raw materials, precision machining, integration of filtration media, and strict configuration control to ensure compliance with technical standards. All work must be performed in accordance with the defined quality and procedural requirements to meet defense-grade performance criteria. This is a small business set-aside contract under the SBA program, classified under NAICS code 332996 for other fabricated metal product manufacturing, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 24, 2026, with a response deadline of August 7, 2026, and is structured as a subcontract opportunity. The place of performance and point of contact details are not specified, but the procurement is accessible through the DIBBS platform using the provided reference link.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Aerospace Connector Supply (NAS554-8)Six units of the MULTIPLE CONNECTOR, part number NAS554-8, are required to be supplied and delivered in full compliance with SAE AS4841 and NAS554 Rev 4 technical specifications. Each unit must be packaged according to MIL-STD-2073-1E standards and marked in accordance with MIL-STD-129 requirements to ensure proper identification, handling, and logistics integration within the Department of Defense supply chain. The contract is structured as a subcontract under the NAICS code 332996, issued by the Maritime Supply Chain ESOC Buys division of the Department of Defense, with a response deadline of July 29, 2026, and a posted date of July 24, 2026. All deliverables must meet rigorous aerospace connector performance and documentation criteria to support mission-critical applications.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Crimped Expander Piston Ring SupplyThe contract requires the manufacture and supply of four crimped expander piston rings that must meet rigorous military specifications, ensuring full compliance with Defense Logistics Agency technical standards and packaging guidelines. These components are critical for high-performance applications and must be produced to exacting tolerances in accordance with DLA requirements to guarantee reliability and operational readiness under demanding conditions. Precision manufacturing, material certification, and adherence to approved quality control protocols are essential to satisfy the technical demands of the procurement. The solicitation, issued under the NAICS code 332996 for other fabricated metal product manufacturing, is structured as a subcontract opportunity with a response deadline of July 29, 2026. It is associated with the Land Supply Chain organization within the Department of Defense, and performance is to be delivered to a military postal address in FPO with ZIP code 09564. While no specific point of contact or set-aside classification is provided, all bidders must ensure their proposals align with the stated DLA technical and logistical criteria, and the submission must be made through the designated DIBBS platform to be considered valid.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Fastener ManufacturingThe contract mandates the precision manufacturing of collar and pin-rivet components to stringent military specifications for use in a critical application, requiring adherence to exact engineering and quality standards. These components are essential for mission-critical systems and must be produced with zero tolerance for deviation, ensuring reliability under extreme operational conditions. The work is classified as a subcontract under the NAICS code 332996, indicating specialized fabrication of other metal products, and performance is required at Hill Air Force Base with the zip code 84056-5734. The solicitation was posted on July 24, 2026, with a firm response deadline of July 29, 2026, allowing a tight five-day window for qualified vendors to submit proposals. The contracting entity is the ASC Commodities Division within the Department of Defense, which oversees procurement for defense-related fastener systems. Although no set-aside designation or point of contact is listed, the contract’s high-stakes nature implies rigorous evaluation of technical capability, quality control processes, and production scalability. Subcontractors must demonstrate proven experience in military-grade fastener fabrication and compliance with all applicable defense manufacturing protocols.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CONNECTOR, MULTIPLE,The contract pertains to the procurement of a MULTIPLE CONNECTOR, identified by part number NAS554-8 and NSN 4730-01-625-7039, with a requirement for six units to be delivered within five days of award. The item must comply with non-government standards NAS554 Revision 4 dated 08/26/2011 and SAE AS4841 Revision D dated 04/01/2021, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E, with specific packaging codes, materials, and methods outlined, and marking must conform to MIL-STD-129 without special marking codes. Palletization follows DLA packaging requirements, and the delivery is FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at origin, and a Certificate of Conformance is authorized unless superseded by a Quality Assurance Letter of Instruction. The contract specifies the freight forwarder as Northrop Grumman Corp at a staging area in Melbourne, FL, with a final delivery destination in France. The purchase request number is 7016347413, unit price is $6.00 per each, totaling $36.00, and the original required delivery date is July 25, 2024. The solicitation number is SPE7M0-26-T-6925, issued under full and open competition with no set-aside, and the NAICS code is 332996. The contract is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

BOLT, FLUID PASSAGEThe contract solicitation SPE7M4-26-T-256H calls for 14 units of BOLT, FLUID PASSAGE with NSN 4730-01-460-5325, a restricted-source item manufactured exclusively to OEM drawings, with only prequalified sources eligible to respond. Delivery is required within five days of order placement to Tinker AFB, Oklahoma, with FOB Origin terms and inspection and acceptance also performed at origin. The item must comply with stringent marking requirements per MIL-STD-130, including NSN, part number, manufacturer’s CAGE code, date of manufacture, and the “FOR MILITARY USE ONLY” designation, while packaging and labeling adhere to ASTM D3951, RP001, and MIL-STD-129 with standardized barcoding for logistics automation. Safety and environmental compliance is mandated through DFARS clauses prohibiting hexavalent chromium, hazardous material storage, and toxic substance disposal, alongside mandatory submission of Safety Data Sheets aligned with OSHA HazCom standards. Cybersecurity requirements are extensive, including implementation of NIST SP 800-171 controls via clause 252.240-7997, safeguarding covered defense information per 252.204-7012, and reporting cyber incidents immediately; the contractor must be CMMC Level 2 certified. Prohibitions extend to acquisition of telecommunications equipment from designated Chinese military companies and use of mandatory arbitration agreements. The contract mandates electronic invoicing via WAWF and requires offerors to provide their UEI and CAGE code, with full socioeconomic and small business status representations submitted. All submissions are strictly electronic through DIBBS by the July 29, 2026 deadline, and while pricing data is unspecified, historical unit costs suggest a variable range. The contract type remains undetermined pending award, but it includes standard FAR and DFARS clauses on payment acceleration, subcontracting, changes, defaults, and contractor liability, with administrative details like DoDAAC and point of contact to be finalized upon award.

FLUID HANDLING DIVISION

POSTED

DEADLINE

LATERAL, PIPEThe contract specifies the procurement of two cast bronze lateral pipe fittings with a 45-degree branch, each having a nominal pipe size of 2-1/2 inches and an outside diameter of 2.875 inches, with all ends designed as sockets. Brazing rings must be separately packaged and physically attached to each parent component, not grouped collectively in a single container. The product must comply with the Supplemental Quality Assurance Provision SQAP 4730-0003 and adhere to DLA packaging requirements as outlined in RP001. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The supplier is required to provide one Certificate of Quality Compliance (COQC) per manufacturing lot, prepared in strict accordance with SQAP, and must have it ready for Government review at the point of inspection. An electronic copy of each COQC must be uploaded to the iRAPT system via the Receiving Report’s Attachment tab for Government records retention. The item is identified by NSN 4730-00-542-5293 and is subject to configuration change management, variance requests, and removal of government identification from non-accepted supplies as specified in RQ011, RQ002, and RQ001. Delivery is due in 254 days from order, and the contract was issued under solicitation SPE7M3-26-T-7462 by the Department of Defense’s Fluid Handling Division, with William Cain as the primary point of contact.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

Hazardous Materials Compliance & Packaging ServicesThe contract requires comprehensive packaging, labeling, and regulatory documentation services for the Vacuum Bleed Filter, strictly aligned with MIL-STD-2073-1E for defense item packaging, MIL-STD-129 for labeling of military shipments, and the OSHA Hazard Communication Standard to ensure proper identification and handling of hazardous materials. All work must adhere to federal military standards for durability, traceability, and safety in transportation and storage, with particular emphasis on accurate hazard labeling, material safety data sheets, and compliance documentation to support DoD logistics and supply chain integrity. The performance location is specified as New Cumberland, PA, with a zip code of 17070-5002, indicating the need for on-site or locally coordinated fulfillment activities. The solicitation, issued under NAICS code 561990 for other support services, is classified as a subcontract opportunity posted by the Department of Defense under LAND SUPPLIER OPNS ENGINES with a response deadline of July 29, 2026. The contract demands strict adherence to federal regulations governing hazardous materials, requiring the vendor to demonstrate expertise in military packaging protocols and OSHA compliance, including updated SDS formatting, container labeling, and documentation audit readiness. This contract is not subject to a specific set-aside and is accessible through the DIBBS platform, requiring proposals to fully address technical and regulatory obligations to qualify for award.

All Other Support Services

POSTED

DEADLINE

Quality Inspection and Compliance DocumentationThe contract requires comprehensive in-process and final inspection of rocker arms to ensure full compliance with Federal Acquisition Regulation 52.246-2, mandating rigorous quality control throughout manufacturing stages. All inspection activities must be thoroughly documented to meet audit-ready recordkeeping standards, with detailed records maintained for potential government review and verification. The work is to be performed at the specified place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and is classified as a subcontract under NAICS code 541690, indicating it falls within other scientific and technical consulting services. Responses are due by August 8, 2026, and the contract is issued by the Department of Defense through LAND SUPPLIER OPNS ENGINES, emphasizing the critical nature of quality assurance for defense-related components.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

First Destination Transportation (FDT) / Domestic FreightThe contract pertains to the transportation of packaged rocker arms under the Department of Defense’s First Destination Transportation program, requiring movement from an FOB origin point to a destination within the contiguous United States. Performance is specifically designated for New Cumberland, Pennsylvania, with the NAICS code 484220 indicating the scope involves truck transportation of freight. The contractor must comply with DLA’s FDT program requirements, which include using the Wide Area WorkFlow system for electronic reporting throughout the shipment process. This is a subcontract opportunity with a solicitation response deadline on August 8, 2026, and the posting date is July 24, 2026, indicating a standard procurement timeline for planning and bid submission. The contracting activity falls under Land Supplier Operations Engines, a component of the broader Department of Defense logistics infrastructure.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military-Compliant Marking and LabelingThis contract requires the application of durable, scannable labels and markings in strict compliance with MIL-STD-129 to support military logistics operations and seamless integration with the Wide Area Workflow system. The work must ensure that all markings are legible, weather-resistant, and machine-readable to facilitate accurate tracking and inventory management across the Department of Defense supply chain. The labels and markings must meet all technical specifications for content, placement, and material resilience mandated by the standard to guarantee uninterrupted operational readiness. The solicitation is issued as a subcontract under the NAICS code 323111 for printing and related support activities, with a response deadline of August 8, 2026. Performance is expected to occur at New Cumberland, Pennsylvania, with a zip code of 17070-5002. Although the agency and point of contact details are not provided, the contracting organization is listed as LAND SUPPLIER OPNS ENGINES within the Department of Defense. Participation is open without a specific set-aside designation, and all submissions must adhere to the technical and procedural requirements tied to MIL-STD-129 and WAWF interoperability to be considered.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Defense-Compliant Packaging and Preservation ServicesThe contract requires comprehensive packaging and preservation services for rocker arms in strict accordance with MIL-STD-2073-1E standards, covering all aspects of protective wrapping, cushioning, and containerization to ensure survival during military shipment and storage. All procedures must meet rigorous defense-grade requirements for moisture resistance, shock protection, corrosion prevention, and long-term durability under operational conditions. The work is to be performed at the designated place of performance in New Cumberland, PA, with a ZIP code of 17070-5002, and must be completed in alignment with the military’s logistical and supply chain protocols. This is a subcontract opportunity under NAICS code 493190, issued by the Department of Defense through the Land Supplier Operations Engines organization. The solicitation was posted on July 24, 2026, and responses are due by August 8, 2026. Interested parties must ensure full compliance with the federal packaging standard and be prepared to demonstrate capability in handling defense-critical components through certified methods. The contract does not specify set-aside classifications or point of contact details, and all submissions must be routed through the official DIBBS portal linked in the posting.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Machining of Rocker ArmsThe contract requires the manufacture of 13,000 rocker arms for engine poppet valves to meet military specifications and the National Stock Number 2815-01-373-6526, ensuring strict adherence to defense-grade quality and performance standards. These components are critical for engine operation and must be produced with precision machining to fulfill operational demands in military applications. The work is classified as a subcontract under NAICS code 332999, indicating it falls under other fabricated metal product manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of August 8, 2026, and performance will take place at New Cumberland, Pennsylvania, with zip code 17070-5002. The contracting agency is LAND SUPPLIER OPNS ENGINES under the Department of Defense, and while no specific point of contact or set-aside details are provided, the requirement is tied to a specific NSN, emphasizing the need for certified compliance and traceability. The official solicitation can be accessed via the provided DIBBS link for full technical and procedural details.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

MOUNT, RESILIENT, WEAPONThe contract is for the procurement of 306 units of a resilient weapon system mount, identified by NSN 5342-01-353-5216 and part number 2HL527, supplied by OSHKOSH DEFENSE LLC. The item is classified as a TYPE I (CODE Z) shelf-life item with a non-extendable shelf life of 240 months, and compliance with shelf-life requirement RS001 is mandatory. Packaging must adhere to MIL-STD-2073-1E with specific packaging codes and procedures, including unit packaging as A1, intermediate containment as E5, and packaging code U. Marking is required per MIL-STD-129 with special code 32 indicating the Type I shelf-life classification, and palletization must meet DLA packaging requirements. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the full quantity must be delivered within 168 days from the award date. The contract permits no variance in quantity, and the required delivery date is June 12, 2027, with a need ship date of January 5, 2027. The delivery address is DLA Distribution Red River in Texarkana, TX, and transportation follows DLA procedural notes C19 and C20. The solicitation number is SPE7L5-26-T-4354, issued under a federal procurement with NAICS code 332994, and the procurement is managed by the Department of Defense’s Land Supplier Operations Engines office, with Bradley Evans as the primary point of contact.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

VACUUM BLEED FILTERThe contract is for the procurement of 13 units of a Vacuum Bleed Filter with NSN 2990-01-513-6153 and part number 23055917-28 supplied by Sargent Aerospace & Defense, LLC. The item is classified as a critical application item and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The contract explicitly prohibits the use of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for specific functional exemptions such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and certain chemical reagents specified by NAVSEA; any portable devices containing mercury must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. All supplies must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking required. Delivery is FOB origin, with an 87-day delivery window ending on October 21, 2026, and inspection and acceptance occur at the destination. The quantity variance is strictly zero percent, and packaging must adhere to DLA’s packaging standards including palletization guidelines. The delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and the item must be shipped using the transportation protocols outlined in DLAD Proc Note C19 and C20. The solicitation was issued on July 24, 2026, with a response deadline of July 29, 2026, under contract number SPE7L5-26-T-4457, classified under NAICS code 333618.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

ROCKER ARM, ENGINE PThis contract specifies the procurement of 13 rocker arms for an engine poppet valve, identified by NSN 2815-01-373-6526 and part number 73304F93, designated as a critical application item for use on the Isotta Fraschini eight-cylinder diesel engine model 2953F01. The item is subject to strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except in specified cases such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents approved by NAVSEA; when used, portable devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using unit container D3, intermediate container DO, and packing code U, with no special marking required. The contract is firm fixed price with zero variance allowed in quantity and requires delivery to the destination with inspection and acceptance occurring upon arrival. The FOB point is origin, and delivery must occur within 134 days after contract award. All shipments must adhere to DLA packaging and transportation guidelines, including the designated parcel post and freight shipping address at the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is part of a federal solicitation issued by the Department of Defense under solicitation number SPE7L5-26-Q-0158, with a response deadline in August 2026 and a material need date of March 13, 2027.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

DISTRIBUTION BOXThe contract specifies the procurement of a Distribution Box with NSN 6110-01-591-6486 and part number 3961281, under solicitation SPE7L5-26-T-4591, for a quantity of 8 units at a unit price of $8.00, totaling $64.00. Delivery is required within 168 days after award, with FOB origin terms, and inspection and acceptance are to occur at the destination. The packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including mandatory marking and labeling per MIL-STD-129. The Unit of Issue is each (EA), and the Quantity per Unit Pack is 1. Palletization must adhere to DLA Packaging Requirements for Procurement, and the shipment must be delivered to the designated receiving warehouse in Tracy, California. The original required delivery date is March 17, 2027, with a needed ship date of January 19, 2027. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, under NAICS code 335312, and is issued by the Department of Defense through Land Supplier Opns Engines. Transportation and shipping instructions reference DLAD Proc Notes C19 and C20, and the point of contact is Bradley Evans, reachable via email and phone.

Motor and Generator Manufacturing

POSTED

DEADLINE

BELT, VThe contract specifies the procurement of a V-belt with part number P463-BX29 and NSN 3030-01-689-4957, totaling 17 units at a unit price of $17.00, for a total contract value of $289.00. Delivery is required FOB origin within 168 days from the contract award, with no tolerance for quantity variance—exactly 17 units must be delivered. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, container types, and packaging codes. Marking requirements follow MIL-STD-129 with no special markings, and palletization adheres to DLA’s packaging standards. The shipment must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, using the provided parcel post and freight addresses. The contract incorporates technical and quality requirements from the DLA Master List, with revisions governed by the solicitation issue date. Transportation guidelines reference DLAD Proc Note C19 for general shipping and C20 for first destination routing. The original required delivery date was October 18, 2026, with a need ship date of January 19, 2027, and the solicitation was issued under contract SPE7L5-26-T-4587 with a response deadline of August 3, 2026.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

BELT, VThis contract specifies the procurement of a BELT, V with NSN 3030-01-555-4750 and part numbers including 3590294, 3715973, 3715979, K080897, and MRP11068 from multiple suppliers including OSHKOSH DEFENSE LLC, Gates Corporation, and AMZ ALABAMA INC. The requirement is for 169 units to be delivered in 63 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occurring at the destination. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes required. The product is classified as a TYPE I (CODE I) item with a non-extendable shelf life of 72 months. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The contract incorporates technical and quality standards referenced in the DLA Master List, and requires compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Covered defense information provisions and transportation guidelines as outlined in DLAD PROC NOTES C19 and C20 apply. Deliveries must be sent to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of July 14, 2026, and original delivery deadline of December 19, 2026. The unit of issue is each, with a unit price of $169.00, totaling $28,561. The solicitation number is SPE7L5-26-T-4605, issued by the Department of Defense under NAICS code 326220, with responses due by August 3, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE