Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Vacuum Chamber Shell Design & Engineering

Active

Federal

Response Deadline08/07/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the mechanical design, structural analysis, and comprehensive engineering documentation for a vacuum chamber shell to meet rigid technical and regulatory standards, including ASME Boiler and Pressure Vessel Code Section VIII and NASA-specific requirements. The work requires the development of engineer-stamped calculations, detailed 3D models, and formal design reports that validate structural integrity, thermal performance, and operational safety under extreme vacuum conditions. All deliverables must align with NASA Glenn Research Center’s specifications and be optimized for the designated performance location in Cleveland, Ohio, with a zip code of 44135. This subcontract, solicited under NAICS code 541330 for engineering services, was posted on July 10, 2026, with a firm response deadline of August 7, 2026, at 4:00 PM. It is managed by the National Aeronautics and Space Administration through its Glenn Research Center and requires full compliance with federal contracting guidelines. The contractor must demonstrate proven expertise in high-vacuum systems and possess the capability to execute all tasks without external oversight, ensuring timely submission of certified engineering artifacts that support mission-critical applications.

General Info

Design and certify vacuum chamber per ASME and NASA standards for Glenn Research Center, Cleveland, Ohio.

Agency

National Aeronautics And Space Administration → NASA Glenn Research CenterView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Cleveland, OH, 44135, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 10

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 04:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Glenn Research Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Glenn Research Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform mechanical design, structural analysis, and engineering documentation for the vacuum chamber shell, ensuring compliance with ASME BPVC Section VIII and NASA standards. Deliverables include engineer-stamped calculations, 3D models, and design reports.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for a range of major construction projects. These services will span all phases of project delivery including planning, design, construction, and closeout, and will support various delivery methods such as Design Build, Progressive Design Build, and other alternative delivery approaches. The contractor will be responsible for ensuring projects are executed within authorized schedules, budgets, and quality standards, acting as a key advisor and manager throughout each phase to maintain efficiency and compliance with Port objectives. This opportunity is classified under NAICS Code 541330 and is targeted at firms with demonstrated expertise in construction management within large-scale infrastructure environments. The point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson, and all communications should be directed through the provided email addresses and phone numbers. The contract forecast was posted on July 27, 2026, and potential offerors are encouraged to access the full solicitation details via the Port’s official portal. The place of performance will be at various Port of Seattle facilities, and all work will be conducted in alignment with the Port’s strategic goals and regulatory requirements.

Construction Management

POSTED

about 3 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services for critical facilities and infrastructure systems at Seattle-Tacoma International Airport, operating within a demanding 24/7/365 environment. The scope encompasses identifying and correcting performance deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, reliability, comfort, and system longevity while ensuring strict compliance with safety and regulatory standards. Work will be executed through Service Directives and conducted in close collaboration with Aviation Facilities and Infrastructure to meet established deliverables and operational requirements. This contract is structured as an Indefinite-Delivery/Indefinite-Quantity instrument under NAICS code 541330, managed by the Port of Seattle’s Aviation Facilities and Infrastructure division. Key point of contact is Jason Gates, with Jim Farris serving as Project Manager, and all communications and project execution will be coordinated through the Port of Seattle. The solicitation was posted in July 2026, with performance expected to occur primarily at Seattle-Tacoma International Airport and no set-aside provisions are identified.

Aviation Facilities & Infrastructure

POSTED

about 3 hours ago

DEADLINE

First Article Testing & Quality Certification ServicesThe contract requires independent execution and comprehensive documentation of First Article Testing in strict accordance with DI-NDTI-80809B, encompassing detailed inspection, precise measurement, and formal reporting to the Defense Logistics Agency. This work must be performed with full adherence to quality assurance standards and delivered results that validate compliance with technical specifications for defense-related components or systems. All testing activities, methodologies, and outcomes must be thoroughly recorded and submitted to DLA for review and certification. This subcontract, issued under a Total Small Business Set-Aside, is classified under NAICS code 541330 and is targeted exclusively at small businesses. The performance location and detailed office address are unspecified, but the contracting entity is the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026, allowing interested small businesses to submit proposals through the DIBBS platform. The requirement emphasizes accuracy, traceability, and regulatory compliance in delivering first article quality certification.

ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Quality Inspection and Conformance ServicesThe contract requires comprehensive quality inspection and conformance testing of shear bolts using zero-defect sampling plans aligned with MIL-STD-1916 or ASQ H1331 standards, ensuring rigorous adherence to defect-free criteria throughout production. Full documentation of all testing procedures, results, and compliance records must be maintained and provided as part of delivery, leaving no room for ambiguity in quality assurance and traceability. This work is critical to confirming that shear bolts meet exacting military and industrial specifications without compromise. This is a total small business set-aside subcontract under NAICS code 541330, awarded by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026. The solicitation is open exclusively to small businesses as defined by the SBA, and performance will be carried out under the direction of the DLA, though the specific place of performance is not detailed. Interested parties must submit responses through the designated DIBBS portal, and all activities must comply with federal subcontracting regulations and the stringent quality protocols defined by the referenced military and quality standards.

ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Quality Assurance & Government Inspection Support ServicesThe contract entails providing advanced inspection systems and comprehensive support services to facilitate government-led quality verification at the point of origin, ensuring full compliance with MIL-STD-1916 and ASQ Z1.4 standards. This includes establishing robust audit readiness protocols, maintaining accurate and accessible recordkeeping systems, and managing nonconformances through structured corrective action processes to uphold defect prevention and continuous quality improvement. The scope demands integration of inspection technologies and procedures that enable real-time data capture, traceability, and reporting to meet rigorous defense quality requirements. The work is classified as a subcontract under NAICS code 541330 and is being administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with responses due by August 27, 2026. While specific performance locations and point of contact details are not provided, the nature of the services implies operations at supplier or manufacturing facilities where government quality verification takes place. Successful proposers must demonstrate experience with military standards, proven quality systems, and the ability to deliver scalable inspection infrastructure capable of supporting high-stakes defense supply chain integrity.

ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in about 1 month

First Article Testing (FAT) Preparation and SubmissionThe contract requires the preparation and submission of First Article Testing (FAT) samples and all associated documentation to the Defense Logistics Agency, ensuring full compliance with military standards including MIL-STD-129 for marking and packaging and DFARS Appendix F for material and process controls. The deliverables must include comprehensive test reports, material certifications, and verified packaging that meets all federal defense procurement requirements. The work is scoped as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 541330 for engineering services. All submissions must be completed and delivered by the response deadline of August 14, 2026, with performance centered at the Anniston, Alabama location, ZIP 36201-4199, under the oversight of the Department of Defense’s Land Supplier Operations Vehicle Support office.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

Widening of CR 511/Brown Bridge Rd Jack Neely Rd to Crowell RdNewton County is seeking qualified firms to provide consulting services for the widening of CR 511/Brown Bridge Road from Jack Neely Road to Crowell Road in Georgia. The solicitation, identified as PE-70700-NONST-2027-000000069, was posted on July 27, 2026, with responses due by August 25, 2026, at 7:00 PM. The project involves improving roadway capacity and safety along this segment, and interested parties must submit Statements of Qualifications demonstrating relevant experience and capabilities. The procurement is managed by the Newton County Board of Commissioners under the state of Georgia’s procurement system, and all submissions must be directed to the designated point of contact, Randi, via email at rfincher@co.newton.ga.us or by phone at 678-625-1237. The work will be performed at the specified location within Newton County, and no set-aside preferences are indicated for this solicitation.

Newton County Board of Commissioners

POSTED

about 4 hours ago

DEADLINE

Facilities Program Part I/Part II Consultant for Outdoor Athletic FacilitiesHagerstown Community College is seeking qualified consulting firms to provide comprehensive services for the planning and design of outdoor athletic facility upgrades under a two-part Facilities Program. The solicitation, numbered 6336, is open for proposals with a submission deadline of August 24, 2026, and was posted on July 27, 2026. The work falls under NAICS code 541330, classifying it as architectural and engineering services, and the project will be performed entirely within Maryland. Interested firms must access all bid documents through the college’s official procurement portal at the provided URL. The primary point of contact for questions and correspondence is Alicia Cullop, reachable via email at bids@hagerstowncc.edu. No set-aside provisions are specified, and submissions must be made in response to the formal solicitation process outlined on the bid locker website.

Hagerstown Community College

POSTED

about 5 hours ago

DEADLINE

Engineering and Technical DocumentationThe contract titled Engineering and Technical Documentation requires the preparation of comprehensive as-built drawings, detailed work plans, Activity Hazard Analyses, a full Safety Plan, and a CPM-based scheduling system to facilitate the safe and compliant execution of construction activities. These deliverables are critical for ensuring regulatory adherence, operational efficiency, and risk mitigation throughout the project lifecycle. The technical documentation must align with industry standards and support seamless coordination between field operations and design teams. This subcontract is issued by the Department of State through the American Consulate in Barcelona, with performance required at the location identified by the zip code 08034. The solicitation was posted on July 27, 2026, and responses are due by August 14, 2026. The NAICS code 541330 classifies this as an engineering services contract, emphasizing specialized technical expertise in construction documentation and safety compliance. While no set-aside provisions are specified, the engagement is structured for submission by qualified contractors capable of delivering precise, timely, and audit-ready engineering deliverables.

American Consulate Barcelona

POSTED

about 8 hours ago

DEADLINE

HAESI 2.0 INDUSTRY DAY 05 AUG 2026The U.S. Army Corps of Engineers, Huntsville Engineering and Support Center, is conducting a virtual industry day on August 5, 2026, at 1430 hours CST to introduce the HAESI 2.0 acquisition, an indefinite delivery contract for architectural and engineering services supporting Redstone Arsenal, Alabama, with work spanning global Department of Defense installations including Germany, Italy, Japan, and Korea. The procurement, identified by solicitation number HAESI2008052026 and classified under NAICS code 541330, targets firms capable of providing comprehensive A-E services such as planning, design, geotechnical investigations, value engineering, cost estimating, and BIM/CADD deliverables compliant with Unified Facilities Criteria, UFGS, LEED, and USACE-specific manuals. The contract structure includes a three-year base period with two optional two-year extensions, totaling a seven-year performance window, with firm-fixed pricing established per individual task order under an aggregated program ceiling of $400 million shared among multiple awardees. Offerors must submit a capabilities questionnaire limited to five one-sided pages via email by August 3, 2026, and are required to self-certify their size status under the $22.5 million small business threshold, potentially qualifying for 8(a), veteran-owned, HUBZone, woman-owned, or other socioeconomic categories. Mandatory compliance includes E-Verify enrollment for all personnel, AT Level 1 and annual OPSEC training, PIV compliance, and the implementation of accident prevention plans aligned with EM 385-1-1 and USACE templates. Contractors with work in Italy must submit Anti-Mafia and SOA certifications, and all manpower must be reported electronically through the ECMRA portal. Key personnel must demonstrate capacity to manage two concurrent $10 million task orders across multiple geographic locations, with professional licensure required for all design certifications. Evaluation will be based on technical qualifications, with no LPTA approach used, and award decisions will follow the traditional trade-off methodology emphasizing expertise and past performance over cost. All deliverables must conform to Tri-Service CADD Standards, be certified by a registered professional engineer, and undergo rigorous quality control via systems like ProjNet Dr. Checks. No pricing, CLINs, or packaging specifications are included in the base contract, as these are defined at the task order level, and the contract does not include formal FAR clauses, with special requirements detailed in Section

US Army Corps Of Engineers

POSTED

about 8 hours ago

DEADLINE

Bridge - NAVSEA Information Technology Support ServicesThe Naval Sea Logistics Center is preparing to award a sole-source, Cost-Plus-Fixed-Fee bridge contract to Orbis Sibro Inc, dba ORBIS, to ensure uninterrupted Information Technology Support Services for the NAVSEALOGCEN Cyber IT & Systems Operations Department. The contract will commence on 9 November 2026, immediately following the expiration of the current task order, and will include a six-month base performance period with an option for an additional six months. The work involves developing, maintaining, and assessing life-cycle support policies and IT applications, along with providing cybersecurity, configuration management, logistics, and technical data services critical to several key Navy programs including Model-Based Product Support, CDMD-OA, Budget Planning System, PARTS, SHIPS3M, ROMIS, and ATIS. These systems underpin essential naval operations such as ship maintenance planning, spare parts funding, digital technical documentation, and outfitting during ship construction and overhauls. The acquisition is classified under NAICS code 541330 with a small business size standard of $25.5 million, and the government has determined that only ORBIS possesses the unique capability to provide these services without disruption. Although this is a non-competitive action based on statutory authority for sole-source procurement, responsible sources may submit capability statements by 11 August 2026 for consideration in case the government decides to pursue competition. The point of contact for inquiries is Michael VanDeMark, with additional support available from Indiana Bolger and Marisa Wirfel.

Navsealogcenkyptdivnuwc Mech Pa

POSTED

about 8 hours ago

DEADLINE

Notice of Change in Acquisition Strategy - FRCSW Technology, Information and Management Support (TIMS) (formerly MAPS)The U.S. Navy’s Fleet Readiness Center has issued a notice revising its acquisition strategy for the Technology, Information and Management Support (TIMS) contract, previously known as MAPS, with a projected award date in FY27 Quarter 2. The procurement is no longer proceeding under the prior woman-owned small business set-aside plan, as the government has reevaluated its approach in alignment with recent federal directives and updated FRCSW requirements, leaving the final contracting vehicle and set-aside status undetermined. The solicitation, identified as N68520-25-RFPREQ-KN00000-0496, was posted on July 27, 2026, with a response deadline of August 15, 2026, and falls under NAICS code 541330 for management consulting services. Performance will be primarily located in San Diego, California, while the contracting office is based at Patuxent River, Maryland. Primary point of contact is Amanda Taylor, with Tiffany Crayle serving as secondary contact for inquiries.

Fleet Readiness Center

POSTED

about 8 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Glenn Research Center

Same awarding agency

NASA Research Announcement (NRA) - Development Plan for Open Fan Flight DemonstrationNASA Glenn Research Center is soliciting proposals for the Development Plan for an Open Fan Flight Demonstration through a Full and Open Competition under solicitation number 80GRC026R0002, with a submission deadline of August 3, 2026, at 5:00 p.m. EDT. The objective is to develop a comprehensive plan that defines the requirements, scope, and feasibility of an open-fan propulsion system for a next-generation single-aisle transport aircraft targeting fleet introduction between 2035 and 2040, with specific parameters including passenger capacity of 150–180, design range of 3,500 nautical miles, cruise Mach of 0.78–0.82, and a gate span no greater than 118 feet. Proposals must include a final plan detailing investment strategies and market analysis, a roadmap for the evolution of the open fan concept toward a future vision product, and comprehensive risk documentation using a 5x5 Likelihood/Consequence scoring method that identifies the top ten risks with mitigation plans. The technical scope requires analysis of aerodynamic integration, structural impacts, noise and emissions, and propulsion reliability, and must be submitted as a single searchable, unlocked PDF with edit permissions enabled, along with a separate Excel-based Price/Cost Volume using Attachment B’s hybrid template and a Business Volume meeting Section VI requirements. Eligibility is restricted to U.S.-organized entities more than 50% owned and controlled by U.S. nationals, requiring completion of the Eligibility Certification and Supplemental Information Form, and proposers must also submit a Data Rights Assertion Table identifying the lowest segregable level of technical development and asserting rights based on private expense development. Proposals must be submitted via NASA’s EFSS Box portal, with pre-submission coordination required at least 48 hours in advance, including notification of intent to submit and a test file submission for new users. The contract includes two CLINs: CLIN 01 on a Firm Fixed Price basis and CLIN 02 on a Cost Plus Fixed Fee basis, with budget justifications required for each. Evaluation is conducted through a best-value trade-off where technical merit is significantly more important than cost, with past experience serving as a mandatory pass/fail gate—failure to demonstrate relevant experience within the last three years disqualifies a proposal. The selected contractor will be required to use the NASA BOX system for deliveries, comply with NASA-HDB

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Technical Documentation & Training DeliveryThe contract requires the development of comprehensive operations and maintenance documentation for a vacuum chamber system and the delivery of hands-on training to up to eight NASA staff members. The documentation must detail procedures for routine operation, troubleshooting common issues, and performing preventive and corrective maintenance, ensuring NASA personnel can independently manage the system after project completion. Training sessions are to be conducted onsite at NASA Glenn Research Center in Cleveland, Ohio, with a focus on practical, real-world application to build competency and confidence in handling the equipment under various operational conditions. The contract is classified as a subcontract with a NAICS code of 541690, indicating it falls under other scientific and technical consulting services. It was posted on July 10, 2026, with responses due by August 7, 2026, and is issued under the National Aeronautics and Space Administration, specifically managed by NASA Glenn Research Center. The place of performance is fixed at Cleveland, Ohio, with no indication of remote work eligibility. The solicitation does not specify a set-aside classification, and there is no designated point of contact listed, which may require proposers to direct inquiries through the SAM.gov portal or general agency channels.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Onsite Installation & CommissioningThe contract requires the contractor to perform final assembly, alignment, leak testing, and commissioning of a vacuum chamber system at NASA Glenn Research Center in Cleveland, Ohio, with all work conducted under government witness. The scope encompasses strict adherence to safety protocols and the completion of final acceptance documentation to ensure the system meets all technical and operational requirements. The work must be executed in full compliance with federal and agency-specific standards, and successful completion will serve as the basis for formal acceptance by NASA personnel. This subcontract is posted under NAICS code 238990 and has a response deadline of August 7, 2026, with the solicitation published on July 10, 2026. The performance location is specifically designated as NASA Glenn Research Center with a zip code of 44135, indicating the physical work site is fixed and must be performed on-site. All activities are subject to government oversight throughout the process, including inspections and documentation review, and the contractor is responsible for ensuring full compliance, proper sequencing of tasks, and timely delivery of certified acceptance records to satisfy contractual obligations.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Thermal Conditioning Unit (TCU) Supply & IntegrationNASA Glenn Research Center is seeking a subcontractor to supply and integrate a Thermal Conditioning Unit capable of achieving extreme thermal conditions within a vacuum chamber. The system must include chillers, heat exchangers, advanced controls, and full PLC/SCADA integration with existing infrastructure to ensure seamless operation and monitoring. The TCU must be engineered to handle rigorous thermal cycling and maintain precise temperature control under high-vacuum environments critical for aerospace testing. Performance specifications demand high reliability, robust thermal management, and compatibility with current facility systems to support mission-critical research and development activities. The contract is posted under NAICS code 333415 for other commercial and industrial machinery and equipment manufacturing, with a response deadline of August 7, 2026. The place of performance is confirmed as Cleveland, Ohio, at the NASA Glenn Research Center facility with a zip code of 44135. This opportunity is structured as a subcontract and does not specify any set-aside provisions. Interested parties must meet technical requirements for thermal performance, control system integration, and compliance with NASA’s infrastructure standards, and submissions must be completed by the stated deadline to be considered.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Thermal Shroud Design & InstallationThe contract entails the design, fabrication, and installation of multi-layer thermal shrouds using cryogenic-grade materials such as aluminum foil and multilayer insulation to maintain precise thermal control in extreme low-temperature environments. The work requires detailed thermal modeling to ensure performance under operational conditions and seamless integration with the Thermal Control Unit to sustain cryogenic temperatures reliably. All components must meet stringent aerospace standards for durability, insulation efficiency, and compatibility with existing systems. Performance is expected at NASA Glenn Research Center in Cleveland, Ohio, with a deadline for responses set for August 7, 2026. This is a subcontract opportunity classified under NAICS code 332430, which pertains to other fabricated metal product manufacturing. The solicitation was posted on July 10, 2026, and while no set-aside designation or point of contact is provided, the requirement is clearly geared toward specialized contractors with expertise in cryogenic thermal systems and aerospace-grade fabrication.

POSTED

DEADLINE

Vacuum Chamber Shell Fabrication & AssemblyThe contract requires the fabrication and assembly of a vacuum chamber shell using either stainless steel or aluminum, with all work must adhere to ASME Boiler and Pressure Vessel Code Sections VIII, IX, and B31.3, and include full welding, non-destructive testing, and certification with the ASME 'U' Code Stamp. The project mandates compliance with NASA Glenn Research Center’s witness requirements, ensuring all manufacturing processes, inspections, and documentation meet stringent aerospace standards. The work must be performed at the designated place of performance in Cleveland, Ohio, with a zip code of 44135, and the solicitation is classified as a subcontract under NAICS code 332420, indicating a focus on metalworking and structural metal fabrication. Responses are due by August 7, 2026, with the solicitation posted on July 10, 2026, and are issued by the National Aeronautics and Space Administration.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Request for Proposal Special Test Equipment (STE) Vacuum Chamber 3 (Chamber Shell, Thermal Shroud, and Thermal Conditioning Unit (TCU)NASA Glenn Research Center is soliciting proposals for the design, fabrication, and delivery of specialized test equipment consisting of one custom rectangular thermal vacuum chamber, one thermal shroud, and one thermal conditioning unit, as part of solicitation number 80GRC026R0011. This combined synopsis and solicitation follows FAR Subpart 12.6 guidelines for commercial items and does not include any set-aside provisions, making it open to all qualified vendors. The equipment is critical for simulating space environmental conditions and must meet stringent performance and reliability standards for use in aerospace research and testing. Proposals must be submitted by August 7, 2026, at 4:00 p.m. Eastern Time, with the contract expected to be awarded following a competitive evaluation process. The place of performance is at the Glenn Research Center in Cleveland, Ohio, and all delivered components must be capable of integration and operation at the designated facility. Primary point of contact for inquiries is Paige Foreman, with Eric DiLisi serving as secondary contact, both reachable via their NASA email addresses. The NAICS code 332420 indicates the procurement is targeted toward companies engaged in the manufacturing of industrial machinery and equipment.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Data Rights ManagementThis contract requires comprehensive management of data rights and software restrictions for technical data and software, with a primary focus on preparing the Data Rights Assertions Table, or DRAT, to accurately document and assert ownership, usage rights, and limitations. The work involves interpreting federal acquisition regulations and government contract provisions to ensure compliance with data rights standards, particularly in contexts involving government-funded research and development. Successful performance necessitates expertise in identifying proprietary information, distinguishing between unlimited, restricted, and government purpose rights, and documenting these distinctions in a legally defensible manner. The contract is issued as a subcontract under NASA Glenn Research Center, part of the National Aeronautics and Space Administration, with a NAICS code of 541611 indicating it relates to management consulting services. The solicitation was posted on June 17, 2026, with responses due by August 3, 2026, at 9:00 PM Eastern Time. While the specific place of performance and point of contact are not specified, the work is expected to support NASA's technical initiatives, requiring close coordination to align data rights management with mission-critical software and data deliverables. There is no set-aside designation noted, meaning the opportunity is open to all qualified contractors regardless of business size or demographic status.

Administrative Management and General Management Consulting Services

POSTED

about 1 month ago

DEADLINE

Information System SecurityThe contract requires the implementation and maintenance of robust cybersecurity measures to safeguard Controlled Unclassified Information (CUI) in accordance with NIST Special Publication 800-171 standards. This includes the development, documentation, and ongoing enforcement of an Information System Security Plan (ISSP) to ensure full compliance with federal cybersecurity requirements. The work involves configuring, monitoring, and updating security controls across information systems to mitigate risks and protect sensitive data from unauthorized access, disclosure, or compromise. All activities must align with the specified security framework and be conducted in a manner that sustains continuous compliance throughout the contract period. This subcontract is issued by NASA Glenn Research Center under the National Aeronautics and Space Administration and is categorized under NAICS code 541512, which pertains to computer systems design and related services. The solicitation was posted on June 17, 2026, with a firm deadline for responses on August 3, 2026, at 9:00 PM Eastern Time. There is no set-aside type specified, and performance location details are not provided. The contract mandates adherence to federal cybersecurity protocols and expects the contractor to possess the technical expertise and institutional capability to manage CUI protection within complex information systems supporting NASA missions.

Computer Systems Design Services

POSTED

about 1 month ago

DEADLINE

Technical Documentation and ReportingThe contract titled Technical Documentation and Reporting requires the preparation of monthly progress reports, detailed technical documentation, and final deliverables that fully comply with NASA's established standards and secure sharing protocols. The work involves ensuring all outputs meet rigorous technical and security requirements set by NASA Glenn Research Center, with an emphasis on accuracy, consistency, and adherence to federal guidelines for handling sensitive information. The contractor must be capable of delivering high-quality, well-organized materials that support ongoing mission objectives and maintain compliance with NASA’s data handling and documentation frameworks. This is a subcontract opportunity with a NAICS code of 541990, indicating it falls under Other Scientific and Technical Consulting Services. The solicitation was posted on June 17, 2026, with a response deadline of August 3, 2026, at 9:00 PM Eastern Time. The place of performance and office address details are not specified, suggesting work may be performed remotely or at multiple locations as needed. All deliverables must align with NASA Glenn Research Center’s expectations for technical rigor and information security, and bidders must be prepared to demonstrate experience with federal space program documentation and secure transmission practices.

All Other Professional, Scientific, and Technical Services

POSTED

about 1 month ago

DEADLINE

Flight Demonstration PlanningNASA Glenn Research Center is seeking a subcontractor to develop comprehensive flight demonstration plans for open fan propulsion technology, focusing on detailed flight test profiles, seamless integration with the host aircraft, and coordination with aviation authorities for safe airspace usage. The work requires technical expertise in propulsion systems and flight testing to define operational parameters, safety protocols, and performance metrics that support real-world validation of open fan concepts. The contract is classified under NAICS code 541330 and is open for proposals with a submission deadline of August 3, 2026, targeting entities capable of delivering advanced aerospace demonstration planning under NASA’s research and development objectives.

Engineering Services

POSTED

about 1 month ago

DEADLINE

Ground Demonstration PlanningNASA Glenn Research Center is seeking a subcontractor to develop comprehensive ground test plans for open fan propulsion technology, focusing on detailed configurations, instrumentation setups, and robust safety protocols to support demonstration efforts. The work requires the design and documentation of test procedures that validate performance under controlled conditions, ensuring accurate data collection and operational safety during high-fidelity engine testing. The contract is classified under NAICS code 541330 and is open for proposals until August 3, 2026, with responses due by 9:00 p.m. Eastern Time. The project is part of a broader initiative to advance next-generation propulsion systems and will involve close coordination with NASA’s technical teams to meet mission objectives and regulatory standards for aerospace testing.

Engineering Services

POSTED

about 1 month ago

DEADLINE