Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

VALVE ASSEMBLY, DRIV

Active
SPE7MC-26-T-150RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a valve assembly, part number AA-A089BEP-4D6A manufactured by PALL AEROPOWER CORPORATION, identified by NSN 4820012989351, with a total quantity of 20 units. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and be packed in accordance with ASTM D3951 unless superseded by the DLA Master List. The unit of issue is each (EA), with no variance allowed in quantity—zero percent plus or minus. Delivery is FOB origin with inspection and acceptance occurring at the destination after a 168-day lead time, with an original required delivery date of May 25, 2027. The ship date is set for January 19, 2027. All packaging and palletization must meet DLA’s RP001 requirements, and transportation is governed by DLAD Proc Note C19 and C20. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. The solicitation number is SPE7MC-26-T-150R, issued under NAICS code 332111, with a response deadline of August 3, 2026, and a primary point of contact at DLA is Paula McClary, reachable via email and phone provided.

General Info

Procure 20 valve assemblies AA-A089BEP-4D6A, NSN 4820012989351, FOB origin, deliver to New Cumberland, PA by May 25, 2027.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7MC-26-T-150R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE ASSEMBLY,DRIV
VALVE ASSEMBLY, DRIV.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CRITICAL APPLICATION ITEM
PALL AEROPOWER CORPORATION 18350 P/N AA-A089BEP-4D6A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017602513 0001 EA 20.000
NSN/MATERIAL:4820012989351
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129.
SPE7MC-26-T-150R
SECTION B
PR: 7017602513 PRLI: 0001 CONT’D
The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/19/2027 Original Required Delivery Date:05/25/2027
SPE7MC-26-T-150R NSN/Part Number: 4820-01-298-9351 Quantity: 20 EA Purchase Request: 7017602513QTY: 20 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332111
New
DIBBS
BAR, METALThe contract covers the procurement of 202 linear feet of corrosion-resistant cold-finish annealed round steel bar , 3 inches in diameter, with lengths strictly in whole feet between 10 and 12 feet, and a weight of approximately 24.03 pounds per foot. The material must conform to SAE AMS-QQ-S-763D Revision D and be classified as Class 304, CF, Annealed, Descal, with full compliance to referenced standards including ASTM A700-14, MIL-STD-129R, and SAE AMS2806. All units must be marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling methods that are legible, waterproof, and non-contaminating; adhesive labels are required for bars under 0.250 inches nominal OD. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with preservation methods compliant with ASTM A700 and special codes Z and ZZ for marking and packaging. Mercury and mercury-containing compounds are strictly prohibited in the material, preservation, packaging, and marking, except for exempted functional applications as specified by NAVSEA. Class I ozone-depleting chemicals are also banned. The supplier must be on the Qualified Suppliers List for Distributors (QSLD) under DLA Troop Support requirements, and non-compliance constitutes an unauthorized substitution with possible criminal penalties. The contract waives source inspection requirements for approved QSLD suppliers, and all deliveries are FOB origin with inspection and acceptance at destination. The shipment must be delivered within 168 days to the designated DLA distribution facility in New Cumberland, PA, with a permitted quantity variance of plus or minus 10%.
NUCLEAR REACTOR PROGRAM

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332111
New
DIBBS
Domestic Component Supplier (Bearing Sub-Assemblies)
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332111
New
DIBBS
Precision Machining and Metal Fabrication of Steering Column HousingThe contract calls for the precision manufacturing of a military-grade steering column housing, requiring advanced metalworking processes including CNC machining, forging or casting, heat treatment, and meticulous finishing to ensure compliance with stringent dimensional tolerances and operational durability requirements. The component must meet exacting military standards for performance under extreme conditions, with all fabrication steps rigorously controlled to guarantee structural integrity and reliability in combat vehicle applications. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to bid, as defined by SBA regulations under NAICS code 332111, which pertains to forged steel and steel forging operations. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and is managed by the Department of Defense under LSO COMBAT VEHICLES AND ARMAMENT. The place of performance and specific office address are not provided, but the work is intended to support defense systems and must be performed in compliance with federal acquisition guidelines. Interested parties must submit proposals through the official DIBBS portal prior to the deadline, and all manufacturing capabilities must be fully accredited to handle classified or controlled military hardware without compromise to security, quality, or traceability standards.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332111
New
DIBBS
Supply of Ring Spacer Components (NSN: 5365016624377)The contract is for the manufacture and delivery of precision metal ring spacer components with National Stock Number 5365016624377, intended for use in defense logistics or mechanical systems. It is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualify to respond, as defined by the SBA and governed by FAR 19.5. The North American Industry Classification System code is 332111, indicating the work falls under forgings and stampings manufacturing. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, and the place of performance is specified as San Diego, California, with a ZIP code of 92136-3581. The contracting office is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, though specific contact information is not provided in the data. The full solicitation can be accessed via the DIBBS portal using the provided UI link.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332111
New
DIBBS
Heavy Industrial Forging and MachiningThe contract requires the precision forging, heat treatment, and machining of a 90-ton snatch block to meet the rigorous mechanical properties specified by ASTM A128, ensuring structural integrity and performance under extreme loads. The component must successfully pass proof load testing as a mandatory requirement, validating its safety and reliability for heavy industrial use. All manufacturing processes must adhere to strict quality control standards to achieve the desired material characteristics and dimensional accuracy. Work is to be performed at a designated location in Anniston, Alabama, with a response deadline of August 3, 2026, and the solicitation was posted on July 22, 2026. The contract is classified as a subcontract under NAICS code 332111 for forged steel product manufacturing, and it is procured by the Department of Defense through the Construction & Equipment Manufacture & Con organization. Performance must align with defense-grade specifications, emphasizing durability, traceability, and compliance with applicable military and industrial standards.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332111
New
DIBBS
Precision Copper Alloy Pipe Fitting Manufacturing (Casting)
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 332111
New
DIBBS
Precision Metal Casting ManufacturingThe contract requires the manufacture of ten precision metal castings designated for defense applications, adhering to zero-defect quality standards and the use of custom tooling specifically developed for this project. Each unit must meet exacting tolerances and performance specifications inherent to military-grade components, with production processes subject to rigorous inspection and verification protocols. The work is scoped under NAICS code 332111, classifying it as a subcontract for metal casting, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, indicating a direct alignment with national defense supply chain priorities. The solicitation is open with a response deadline of July 30, 2026, and is accessible via a public DIBBS portal, though no solicitation number or point of contact is provided. There is no set-aside designation, meaning the contract is open to all qualified suppliers regardless of business size or certification status. The place of performance is not specified, allowing flexibility in manufacturing location, but all components must be delivered to meet defense logistics timelines and standards. The emphasis on precision casting and zero defects underscores the critical nature of the components, likely intended for high-stress or mission-critical defense systems where failure is not an option.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332111
New
DIBBS
Precision Hardware Manufacturing – Lock Washer ProductionThe contract pertains to the manufacture of lock washers in strict compliance with military specifications, ensuring adherence to the National Stock Number NSN 5310015523971. The product must meet precise material composition standards, dimensional tolerances, and mechanical performance criteria to guarantee functionality and reliability in defense applications. The work is classified as a subcontract under NAICS code 332111, indicating a focus on forging and stamping operations, and is issued by the Aviation Supply Chain ESOC Buys division of the Department of Defense. All production activities are expected to align with the stringent quality and consistency demands inherent to military hardware. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, giving interested parties a limited window to submit proposals. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS platform for full documentation and submission requirements. There is no set-aside designation, meaning participation is open to all eligible subcontractors, and the agency is seeking capable manufacturers capable of delivering certified lock washers on schedule to support defense supply chain needs.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332111
New
DIBBS
ANGLE, STRUCTURALThis contract specifies the procurement of structural steel angle shapes with exact dimensions of 3.000 inches in height and width, 0.375 inches in thickness, and lengths ranging from 30 to 40 feet, weighing approximately 7.200 pounds per foot. The material is identified as steel UNS K02600 and must comply with ASTM A6 Table A2.7 for equal-legged L-shapes, with all requirements aligned to ASTM A6/A6M-24B and ASTM A36/A36M-19. Material must be supplied in whole-foot lengths only and marked with continuous identification including the DLA contract delivery order number, NSN, specification revision, alloy details, manufacturer name, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contamination, and adhesive labels are required for items under 0.250 inches nominal OD. Certification of quality compliance, including mill material certification, is mandatory with each shipment, and copies must be forwarded to the DLA Troop Support Contracting Officer. The procurement is governed by strict compliance with the Qualified Suppliers List for Distributors (QSLD), permitting only suppliers listed on the official QSLD to be considered for award; any deviation constitutes an exception and must be explicitly declared. The government waives source inspection requirements for qualified suppliers, and failure to comply with QSLD terms may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129R, with special codes Z and ZZ as defined by ASTM A700, and palletization must meet DLA packaging requirements. The item is designated a critical application, and the total quantity is 768 linear feet to be delivered within 69 days FOB origin to Tracy, CA, with a permitted quantity variance of plus or minus 10 percent. The contract references multiple technical data packages and quality assurance protocols, including CDRL-METALSCERT, and requires strict adherence to all DLA procurement notes and technical requirements as published in official DLA documentation.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332111
New
DIBBS
SHAFT, TURBINE, AIRCRAFTThe contract pertains to the procurement of two aircraft gas turbine engine turbine shafts, identified by NSN 2840-00-837-2071 and part number 3011095, manufactured by Pratt & Whitney Canada Corp and sourced through the Canadian Commercial Corporation. This is a Critical Safety Item designated by the Air Force, subject to stringent quality and cybersecurity controls including CMMC Level 2 self-assessment and compliance with SAE AS9100 for non-tailored higher-level quality requirements. Manufacturing must follow a forging process, requiring specialized tooling, and all supplies must adhere to MIL-STD-129 marking standards with lot and serial numbers, contractor and manufacturer cage codes, and part numbers included on each unit pack. Inspection and acceptance occur at origin under zero-defect sampling principles per MIL-STD-1916 or comparable zero-based plans, with attributes classified as critical, major, or minor assigned specific verification levels or AQLs. Tooling and sourcing inquiries must be directed to designated DLA supply chain teams. The item must be packaged per MIL-STD-2073-1E with specified preservation methods and materials, and palletized according to DLA packaging requirements. Delivery is due in 88 days after award under a firm fixed price structure with no tolerance for quantity variance. All waivers or deviations require formal approval from the DSC Contracting Officer, and the item is subject to Covered Defense Information protocols and government identification removal procedures for non-accepted items.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332111
New
DIBBS
END PLATE, COOLERThe contract is for the procurement of six END PLATE, COOLER units with NSN 9520-01-612-5770, under solicitation SPE8E4-26-T-1921, issued by DLA District San Joaquin on behalf of the Department of Defense. The delivery requirement is for shipment FOB origin within 167 days of award, with no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at the receiving warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and marking instructions provided, including the use of D3 intermediate containers and no special marking. Metal certification requirements are mandated through CDRL-METALSCERT, and all technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The unit price is $6.00 per item for a total contract value of $36.00. The contract mandates adherence to DLA packaging, marking, and shipping protocols, including RP001 and IP083 for metal products, with all materials requiring proper preparation and labeling before delivery. The shipping and delivery address is standardized to the DLA receiving facility at 25600 S Chrisman Road, Tracy, CA 95304-5000. The original required delivery date is February 7, 2027, with a need ship date of January 18, 2027, allowing minimal buffer for logistics. Transportation and freight details follow DLAD Proc Note C19 and C20. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and the NAICS code 332111 identifies the industrial category as forged steel and stampings. Primary point of contact is Pamela Duffey, with phone and email provided for coordination, and procurement is conducted under the DoD's authorized unit of issue system with referenced ANSI X12 mappings available via official DLA links.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332111
New
DIBBS
BAR, METALThis contract specifies the procurement of steel bar stock composed of UNS K23080 alloy, supplied in round form with a 3.000 inch diameter and lengths between 10 and 12 feet in even-foot increments only, weighing 24.03 pounds per foot. The material must meet stringent technical and quality standards outlined in referenced specifications including SAE AMS6427P, ASTM A700-14, and MIL-STD-129R, with all requirements governed by the DLA Master List of Technical and Quality Requirements. A Certificate of Quality Compliance, or mill-material certification, is mandatory and must accompany each shipment, with a copy forwarded directly to the DLA Troop Support Contracting Officer. Continuous identification markings are required on every unit, including the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s name, heat and lot number, and dimensions, all applied via stamping or stenciling using non-contaminating, waterproof inks that remain legible under normal handling. Adhesive labels are permitted for bars under 0.250 inch nominal diameter, while tags are acceptable for wires. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement constitutes an exception that must be explicitly declared; failure to comply may result in criminal penalties. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with special codes Z and ZZ applied in accordance with ASTM A700, and all marking must follow MIL-STD-129 specifications. Items are to be shipped FOB origin, with a 10% variance allowed in quantity, inspected and accepted at destination. The delivery timeframe is 167 days from solicitation issue, with an original required delivery date of January 22, 2027. The product is designated a critical application item, and all documentation including CDRL-METALSCERT is required unless waived under QSL program compliance. No source inspection is required for QSL-compliant suppliers, and preservation methods must align with ASTM A700 standards. All shipments must be labeled with the specified parcel post address and delivered to the DLA Distribution facility in New Cumberland, Pennsylvania.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332911
New
DIBBS
DISK, VALVEThe contract specifies the procurement of a disc assembly for a 2-1/2 inch relief valve, identified by NSN 4820-00-467-2913 and part number 07915005000 from Emerson Automation Solutions, classified as a critical application item. The requirement is for a single unit with no allowable quantity variance, to be delivered FOB origin within 168 days, with a required ship date of January 19, 2027, and an original delivery deadline of July 8, 2027. All packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and unit containment, with marking adhering strictly to MIL-STD-129 and no special marking codes applied. The item must be palletized per DLA standards and shipped to the DDSP New Cumberland Facility in Pennsylvania. The contract prohibits the intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Acceptance and inspection are both designated at the destination, and the contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the solicitation number SPE7MC-26-T-146G was issued under the NAICS code 332911 with a response deadline of August 3, 2026, and the contracting office contact is Paula McClary at DLA.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVEThe contract pertains to the supply of a SEAT, VALVE with part number 264080102-45CD and NSN 4820014789171, limited to Electric Boat Corporation with no foreign suppliers permitted. The item must comply with stringent DLA packaging and technical requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements, and mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, lamps, sensors, or weapons systems specified by NAVSEA, with additional safeguards required for portable mercury-containing devices. Delivery is set for 168 days after award, FOB origin, with zero tolerance for quantity variance, and the full shipment of 67 units must be packaged per MIL-STD-2073-1E and marked in accordance with MIL-STD-129 without special markings. Palletization follows DLA packaging guidelines, and the delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania; the original required delivery date is October 7, 2027, with a need ship date of January 19, 2027. The solicitation number is SPE7MC-26-T-152H, issued under NAICS 332911 by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact Paula McClary, and the contract is subject to DLA transport and freight procedures as outlined in specific procurement notes.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLYThe contract is for the procurement of two butterfly valves without operators, identified by NSN 4820-01-259-5719 and part number 144-703-035-360-036, furnished under solicitation SPE7MC-26-T-148D. Delivery is required within 168 days of contract award, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and packaging codes. All packaging, preservation, and marking must be free of mercury or mercury compounds, except for functional uses in approved items like batteries or sensors as defined by NAVSEA, and portable devices containing mercury must have a secondary containment system. The use of Class I ozone-depleting chemicals is entirely prohibited, with any substitute chemicals requiring prior approval. The valves must conform to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, controlled by the revision in effect on the solicitation issue date. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the unit of issue is each. The contract sets a required ship date of January 19, 2027, with an original delivery deadline of March 19, 2027, and is managed by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact Paula Mcclary.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBEThe contract is for the procurement of 14 globe valves with NSN 4820-01-506-9986 and part number 166B-011H, manufactured by Milwaukee Valve Co., Inc., under solicitation SPE7MC-26-T-150S. The item is classified as a critical application product requiring strict adherence to DLA’s Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the valve unless specifically exempted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable mercury-containing devices must feature shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Tooling for casting or forging processes may be required for production, and vendors are directed to contact DLA’s Casting and Forging Assistance team for sourcing support. Packaging must comply with MIL-STD-129 and DLA’s RP001 packaging requirements, with all items delivered FOB origin in accordance with the specified Unit of Issue. The delivery schedule requires fulfillment within 168 days, with a mandatory ship date of January 19, 2027, and delivery destination set at the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur upon arrival at the destination, with zero tolerance for quantity variance. The contract was posted on July 23, 2026, with responses due by August 3, 2026, under NAICS code 332911, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333515
New
DIBBS
FILE, ROTARYThis contract pertains to the procurement of 481 units of a rotary component identified by NSN 3455-01-232-8413 and purchase request 7017586174, with a unit price of $481.00 and a total value of $231,361. Delivered FOB origin, the item must be delivered within 167 days of contract award, with a required delivery date of October 19, 2026, and a need ship date of January 18, 2027. No quantity variance is permitted, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 as supplemented by all applicable DLA Master List of Technical and Quality Requirements, with labeling and marking conforming to MIL-STD-129 and palletization following RP001 guidelines. The unit of issue is each (EA), and the delivery destination is the DLA Distribution DDSP New Cumberland Facility at 2083 Normandy Drive, Doors 113 to 134, New Cumberland, PA 17070-5002. Transportation and freight instructions are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E5-26-T-3682, issued under NAICS code 333515, and all requirements referenced in the DLA Master List take priority over any general commercial or technical specifications including CID A-A-51146C Revision C dated 04/11/2022. The point of contact is Khue Nguyen at khue.nguyen@dla.mil or 215-737-2076.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVEThe contract specifies the procurement of a disk valve made of corrosion-resistant steel, identified by NSN 4820-01-361-4999 and part number 236461 from Marotta Controls Inc, with a quantity of 11 units required. Delivery is due within 168 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and container types, and marking must adhere to MIL-STD-129 without any special markings. The item is classified as a critical application item, and mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the valve, except for approved functional uses such as in batteries, instruments, or weapons as defined by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment per NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the applicable revision is determined by the solicitation or award date depending on acquisition size. Packaging and palletization follow DLA’s procurement requirements, and the delivery destination is the DLA Distribution Center at New Cumberland, Pennsylvania. The contract’s solicitation number is SPE7MC-26-T-148E, with an original required delivery date of June 23, 2027, and a need ship date of January 19, 2027. The unit price is $11.00 per unit, totaling $121.00, with zero tolerance for quantity variance. The contracting office is the Department of Defense, and primary point of contact is Paula McClary, reachable through the provided email and phone number.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339920
New
DIBBS
LIFE PRESERVER, VESTThe contract specifies the procurement of 150 life preserver vests, identified by NSN 4220-01-415-9817 and part number MV3192, to be supplied exclusively by Mustang Survival Mfg., Inc. under CAGE code 8GFM5. The item is designated as a critical application item with no shelf life requirement and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Strict restrictions prohibit the use of asbestos and the intentional addition of mercury or mercury-containing compounds, with narrow exceptions for specific functional components such as batteries and instruments, which must meet additional containment and safety standards per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129, including no special marking codes. The delivery point is the DLA Distribution DDSP New Cumberland Facility, with FOB origin terms and a firm delivery deadline of 120 days after award. Inspection and acceptance occur at destination, with zero tolerance for quantity variance. Transportation and shipping instructions follow DLA procedural notes C19 and C20, and the purchase request is linked to a specific material need date of May 19, 2026.
Sporting and Athletic Goods Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336310
New
DIBBS
GUIDE, DISK, VALVEThis contract specifies the procurement of a bronze GUIDE, DISK, VALVE that must be rough machined, with final machining to be performed at the installation site. The item is designated as a critical application item with strict compliance requirements including adherence to DLA packaging standards under RP001 and technical/quality specifications referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are explicitly prohibited from direct contact with the hardware except under narrowly defined exceptions for specific functional components, and compliance with NAVSEA 5100-003D is mandatory including requirements for shock-proof containment in permitted cases. A Certificate of Quality Compliance is required. The item is identified by NSN 4820-01-042-9683 with a quantity of four units, to be delivered FOB origin within 168 days. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. The unit of issue is each, priced at $4.00 per unit, totaling $16.00. Palletization, intermediate containment, and packaging methods are clearly defined per specified codes, and the delivery address is DDSP New Cumberland, Pennsylvania. The contract mandates sourcing coordination via the DLA Casting and Forging Assistance Request process due to potential tooling and manufacturing complexities. The required ship date is January 19, 2027, with an original delivery deadline of September 25, 2027.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBEThe contract specifies the procurement of 12 units of a 3/4 inch globe valve with an in-line stop type and Class A rating, manufactured through a metal casting process requiring specialized tooling. Each valve must include a securely attached identification plate displaying CID 882059926 and conform to Naval Sea Systems Command drawings, with the exception of the BUNA-N bonnet O-ring, which must be individually packed in a bag and affixed to the valve. The item is identified by NSN 4820-01-258-7210 and is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements, requiring the supplier to be certified by an accredited C3PAO. Delivery is mandated within 168 days after award, with the place of performance located in New Cumberland, Pennsylvania, 17070-5002. The solicitation, issued under SPE7MC-26-T-147V, was posted on July 23, 2026, with responses due by August 3, 2026, and is classified under NAICS code 332911. Primary point of contact is Paula Mcclary at fmda3302@dla.mil or 614-692-0417. Sourcing and tooling inquiries should be directed to DLA’s Aviation or Land & Maritime Supply Chains depending on application.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
BODY, VALVEThis contract pertains to the procurement of a valve body identified by NSN 4820-01-535-4414 and part number 3268126-C1, with a total quantity of three units to be delivered FOB origin within 168 days. The item is supplied by FMC Technologies Inc DBA FMC Fluid and must comply with strict packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, cushioning materials, and unit containment requirements. All packaging and labeling must adhere to DLA’s procurement guidelines, with no special marking required. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance are to occur at the destination. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for limited exceptions including functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA, with portable devices containing mercury requiring double containment and shock resistance per NAVSEA 5100-003D. The solicitation is a total small business set-aside under NAICS code 332919, with a response deadline in August 2026 and an original required delivery date of February 1, 2027. The unit of issue is each, priced at $3.00 per unit, with zero variance allowed in quantity. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined by the solicitation or award date. Transportation and shipping instructions follow DLAD procedural notes C19 and C20.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332323
New
DIBBS
HEATER, SPACE, ELECTRThe contract is for the procurement of three electric space heaters with NSN/Part Number 4520-01-595-9096 from VALAD ELECTRIC HEATING CORP., identified by CAGE code 17032 and located in Tarrytown, NY. The procurement is being conducted under solicitation number SPE8E8-26-T-4839, issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with a required delivery date 167 days after award. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. This acquisition falls under NAICS code 332323 and is classified as a federal procurement with no set-aside designation. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance determined by the revision in effect on the solicitation issue date. All non-accepted supplies must have government identification removed prior to return. Primary point of contact for the solicitation is Alexis Selby, reachable via email and phone provided in the contract data. The place of performance is specified as New Cumberland, PA, with a zip code of 17070-5002.
Ornamental and Architectural Metal Work Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLUIDThis contract issued by the Defense Logistics Agency specifies the procurement of two units of a fluid pressure regulating valve, identified by NSN 4820-01-524-6739 and part numbers 7560, 7615-G501, and 7615C-G501, manufactured by Howell Laboratories Inc. The delivery is due in 168 days from the contract award with a firm delivery deadline of January 19, 2027, and the items must be shipped FOB origin with no variance allowed in quantity. The valve must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and mercury or mercury-containing compounds are strictly prohibited unless expressly exempted for functional components such as batteries, sensors, or controlled instruments, with additional containment requirements for portable devices. Packaging must follow MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special markings required, and palletization must meet DLA packaging standards. Shipment must be made to the DDSP New Cumberland Facility in Pennsylvania, and transportation logistics are governed by specific DLA procedural notes. The contract is awarded under solicitation SPE7MC-26-T-151B, issued to meet defense supply chain needs, with the primary point of contact being Paula Mcclary at DLA.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details