Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Valve Component Pressure and NDE Testing

Active

Federal

Response Deadline10/23/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This 8(a) sole source subcontract for the NASA Shared Services Center involves providing specialized quality assurance inspection and pressure testing services for prime contractors. The scope of work focuses on valve component testing, specifically requiring hydrostatic pressure testing at 350 psi and Non-Destructive Evaluation to identify cracks and voids using ultrasonic, X-ray, or dye penetrant equipment. All inspections must be performed in strict accordance with MSS-SP-55 requirements. The selected contractor is responsible for delivering comprehensive inspection reports and formal pressure test certifications. This opportunity falls under NAICS code 541380 and is designated as a set-aside for 8(a) certified firms.

General Info

8(a) subcontract for NASA valve quality assurance, pressure testing, and MSS-SP-55 inspections.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MS, USA

Set-Aside

8A

Documents

This scope was carved out of 80NSSC26940131Q.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

6" Flex Flo Bodies

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 08:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs quality assurance inspection and pressure testing for prime contractors on NASA Shared Services Center projects. Conducts hydrostatic pressure testing at 350 psi and Non-Destructive Evaluation (NDE) for cracks and voids using X-ray, Ultrasonic, or Dye Penetrant equipment. Performs inspections according to MSS-SP-55 requirements. Delivers inspection reports and pressure test certifications.

Similar Contracts

Same NAICS industry code

Ballistic Production Control Testing (PCT) ServicesThis subcontract opportunity is for Ballistic Production Control Testing (PCT) Services supporting the DLA Weapons Support Land Supply Chain within the Department of Defense. The selected provider will perform ballistic testing for prime contractors on DLA and Army projects, specifically conducting Production Control Testing and Ballistic Coupon Testing. All work must be executed in accordance with ATPD 2352 utilizing precision impact analysis tools and high-velocity projectile firing equipment to deliver final Ballistic PCT Test Reports and Certifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380. Due to the nature of the work and the requirement to handle classified drawings, the contractor must possess a facility clearance and meet CMMC Level 2 compliance standards. Interested parties must submit their responses by November 18, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material from floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area, totaling approximately 4,200 square feet if confirmed. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone small businesses, under NAICS code 541380. Bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026, at 3:00 PM CT. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes various FAR clauses regarding small business utilization, minimum wages, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis.

Joliet Job Corps

POSTED

about 11 hours ago

DEADLINE

in about 17 hours

Soil and Compaction TestingThis subcontract opportunity involves providing professional soil and compaction inspection and testing services for the Government of Ontario Ministry of Environment, Conservation and Parks. The selected provider will support prime contractors on facility projects, specifically focusing on road and parking upgrades. Key responsibilities include conducting field testing of soil compaction and inspecting sub-grade materials utilizing nuclear densitometers. All resulting soil and compaction test reports must be certified by a Professional Engineer. The solicitation was posted on October 20, 2026, with a response deadline of November 20, 2026. This project falls under NAICS code 541380 and is managed by the Ministry of Environment, Conservation and Parks.

Environment, Conservation and Parks

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Environmental Laboratory ServicesThis subcontract for Environmental Laboratory Services supports prime contractors working on projects for the Confederated Tribes of the Colville Reservation. The primary scope of work involves performing laboratory analysis on groundwater samples collected from the Nespelem Post and Pole site, which includes comprehensive data verification and validation processes. To ensure compliance, the service provider must maintain laboratory certification for all specific analytes required by the Quality Assurance Project Plan. The selected contractor is responsible for delivering all analytical reports and laboratory data in an electronic format. This opportunity is categorized under NAICS code 541380 and is centered in Nespelem, Washington. Interested parties should note the response deadline of November 5, 2026.

Confederated Tribes of the Colville Reservation

POSTED

about 12 hours ago

DEADLINE

SCBA System Installation and Air Quality Certification SpecialistThis subcontract opportunity is for an SCBA System Installation and Air Quality Certification Specialist to support prime contractors on fire department projects for the Wilcox County Board of Commissioners in Georgia. The selected specialist will be responsible for the physical installation of systems, performing comprehensive leak testing, and conducting system startups and operational demonstrations. A critical component of the scope involves using specialized equipment to perform air quality sampling to ensure compliance with Grade E breathing air standards. The final deliverables for this engagement include a fully leak-tested system and a formal Air Quality Certification report. Interested parties must respond by November 19, 2026.

Wilcox County Board of Commissioners

POSTED

about 12 hours ago

DEADLINE

Construction Materials Testing LaboratoryThis subcontract opportunity is for a Construction Materials Testing Laboratory to provide independent testing services for prime contractors working on City of Hollywood Public Utilities projects. The scope of work focuses on the compression testing of repair mortars and cement-based grouts in accordance with ASTM C109, as well as the testing of adhesive dowels. The selected provider will be responsible for delivering certified test reports verifying the strength of both grout and concrete. The solicitation is categorized under NAICS code 541380 and was posted on October 20, 2026. Interested parties must submit their responses by the deadline of November 25, 2026. This contract supports infrastructure quality assurance for public utility projects within the state of Florida.

Public Utilities

POSTED

about 14 hours ago

DEADLINE

in about 1 month

OGRA Approved LPG Cylinder Inspection ServicesThis subcontract opportunity with Pakistan State Oil Company Ltd involves providing third-party safety and compliance inspections for LPG cylinders used by prime contractors on PSO projects. The selected provider will be responsible for conducting technical inspections, quality assurance checks, and safety certifications utilizing pressure testing equipment and non-destructive testing methods to ensure all cylinders meet the standards set by the Oil and Gas Regulatory Authority. A mandatory requirement for this contract is that the service provider must be OGRA Approved. The scope of work includes the delivery of detailed inspection reports and official safety certifications. Interested parties must respond by October 26, 2026, to be considered for these specialized technical services.

Pakistan State Oil Company Ltd

POSTED

about 14 hours ago

DEADLINE

RFP GF-32077-AS (OGRA Approved Third Party Inspection Services for LPG Cylinders)

Solicitation # GF-32077-AS

Solicitation GF-32077-AS is issued by the Pakistan State Oil Company Ltd for the procurement of OGRA Approved Third Party Inspection Services for LPG Cylinders. The procurement process is conducted in accordance with PPRA Clause 42 b, with electronic bids submitted through the SAP Ariba portal. The response deadline is October 26, 2026, at 09:15 AM. Eligible bidders must be active taxpayers and provide valid NTN, GST/PST certificates, and the CNIC of the owner or authorized representative. To be considered, vendors must demonstrate adequate past relevant experience and financial capabilities, certify that they have not been blacklisted by any public or private entity, and confirm they have not been involved in any fatal accidents during project execution within the last two years. Conditional or partial proposals will be rejected, and any incomplete or false information provided will result in immediate disqualification.

Pakistan State Oil Company Ltd

POSTED

about 14 hours ago

DEADLINE

RFI Testing and Certification ServicesThis subcontract, titled RFI Testing and Certification Services, is issued by the Navsup Weapon Systems Support under the Department of Defense. The contractor is responsible for performing final testing and inspection of repaired Mounting Bases, specifically part number 822-1708-001, to ensure they meet Ready For Issue specifications for US Navy projects. Using specialized test and tooling equipment and following established repair and overhaul manuals, the contractor must validate serviceability and document all results to facilitate government acceptance. The primary deliverables for this engagement include the Final Test Report and the RFI Certification. This opportunity falls under NAICS code 541380 and was posted on October 20, 2026, with a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

about 15 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Quality ValidationThis subcontract for Non-Destructive Testing (NDT) and Quality Validation supports prime contractors on DLA Aviation F-118 engine projects for the Department of Defense. The scope of work involves performing specialized testing and inspections, including pressure testing, leak testing, and dimensional inspection. These tasks are executed using advanced equipment such as CMM, X-ray, and ultrasonic tools to ensure rigorous quality standards. To qualify for this engagement, providers must hold NADCAP and AS9100 certifications. The primary deliverables include certified test reports and Inspection Method Sheets. This opportunity is categorized under NAICS code 541380 and is managed by DLA Aviation in Oklahoma City.

Ok DLA Aviation At Oklahoma City

POSTED

about 15 hours ago

DEADLINE

Marine Non-Destructive Testing (NDT) ServicesThis subcontract for Marine Non-Destructive Testing (NDT) Services involves performing specialized inspections on underwater hull components for the US Navy USNS SACAGAWEA projects. The scope of work focuses on testing welded seams, butts, and critical hull stress points utilizing underwater-rated magnetic particle or ultrasonic equipment. The selected provider is responsible for delivering comprehensive technical test reports and data logs to the prime contractors. Managed by the Department of Defense through Mschq Norfolk under NAICS code 541380, the contract mandates strict qualification standards. Personnel must hold NDT Level II or III certification and possess SECNAV 5512/1 access to perform the required duties. The solicitation was posted on October 20, 2026, with a response deadline of October 26, 2026.

POSTED

about 15 hours ago

DEADLINE

System Testing and RFI CertificationThis subcontract opportunity, titled System Testing and RFI Certification, involves providing final testing and inspection services for overhauled Distributing Systems supporting prime contractors on US Navy projects for the Navsup Weapon Systems Support agency. The selected provider will be responsible for conducting operational and reliability testing using Special Test Equipment to verify that all items function correctly within their intended operational environments and adhere strictly to Navy inspection standards. Key deliverables for this engagement include the submission of a Final Test Report and RFI Certification. The project falls under NAICS code 541380, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

about 15 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Remote Installation and Technical SupportThis subcontract, managed by the NASA Shared Services Center, focuses on providing specialized technical support for the remote installation of modernized software for prime contractors working on NASA Marshall Space Flight Center projects. The primary objective is the successful deployment and operationalization of VibePro software within the NASA environment. This process involves managing remote hands installation and offering technical guidance through the use of remote access tools. The scope of work requires the contractor to coordinate closely with remote personnel at the Marshall Space Flight Center to ensure a seamless final build deployment. Classified under NAICS code 541519, the opportunity was posted on October 20, 2026, with a response deadline of October 23, 2026.

Other Computer Related Services

POSTED

about 15 hours ago

DEADLINE

Java Framework Modernization DeveloperThe Java Framework Modernization Developer subcontract supports prime contractors on NASA Marshall Space Flight Center projects by upgrading Java frameworks and runtime environments. The scope of work includes updating Java runtimes, resolving bugs resulting from framework migrations, and managing production builds using JRE and JDK to ensure compatibility with the NASA deployment pipeline. The successful provider must demonstrate proficiency in Java framework migration and production build management to deliver a final production build incorporating all Phase 2 upgrades. This opportunity is associated with NAICS code 541511 and is managed through the NASA Shared Services Center.

Custom Computer Programming Services

POSTED

about 15 hours ago

DEADLINE

Identity and Security Modernization SpecialistThis subcontract opportunity, titled Identity and Security Modernization Specialist, focuses on updating identity management and security protocols for prime contractors working on NASA Marshall Space Flight Center projects. The primary objective is to implement required authentication methods and modernize identity management frameworks to ensure full alignment with NASA IT security standards. The project requires the delivery of a modernized security and authentication module integrated specifically into the VibePro software. All work must be performed in strict compliance with NASA IT security requirements and frameworks to ensure the integrity and security of agency systems.

Custom Computer Programming Services

POSTED

about 15 hours ago

DEADLINE

Precision Machining of Valve Bodies and HousingsThis 8(a) sole source subcontract through the NASA Shared Services Center involves the precision machining and finishing of cast stainless steel valve components. The scope of work requires the production of seven 6 inch 150 lb flange valve main bodies and seven end housings, strictly adhering to drawings LM-7778 and LM-7776. Utilizing precision CNC milling and turning equipment, the contractor must maintain tight tolerances ranging from plus or minus 1/16 inch to plus or minus .010 inches. The final deliverable for this project consists of fourteen fully machined valve components.

POSTED

about 15 hours ago

DEADLINE

CF8 Stainless Steel Valve Body CastingThis 8(a) sole source subcontract with the NASA Shared Services Center involves the casting of high-pressure industrial water valve components for prime contractors. The scope of work requires the production of fourteen rough-cast stainless steel components, specifically seven 6 inch 150 lb flange valve main bodies and seven end housings. All parts must be manufactured using CF8 Stainless Steel in accordance with ASTM A351 and ISO 8062-4:2017 Grade P and S tolerances. The contractor will utilize government-furnished molds to complete the fabrication process. This project falls under NAICS code 332911 and is managed by the National Aeronautics And Space Administration.

Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

heavy‑duty pallet rack components

Solicitation # 80NSSC26947036Q

Solicitation 80NSSC26947036Q is a firm-fixed-price, small business set-aside procurement issued by the NASA Shared Services Center for heavy-duty pallet rack components to support warehousing at the Stennis Space Center in Mississippi. This is a materials-only procurement that strictly excludes all installation, assembly, anchoring services, and on-site labor. The required deliverables include 15 starter frames, 90 add-on frames, 210 beams, 630 galvanized wire decks, 60 steel column guards, and 960 concrete anchor bolts. All metal frames, beams, and guards must be finished in NASA Blue, while wire decks and anchors must retain their galvanized or zinc-plated finishes. The components must have a load capacity of 6,800 pounds and be constructed from welded I-6 gauge steel. The contract is being awarded based on the lowest price technically acceptable (LPTA) method. Delivery is FOB Destination to the SSC Logistics Warehousing facility, with a final delivery deadline of December 15, 2026. Offerors must be registered in the System for Award Management and submit quotes by October 22, 2026. All materials must be delivered new and in original manufacturer packaging, accompanied by packing lists, product data sheets, and warranties. The procurement is subject to various FAR and NFS clauses, including specific requirements for sustainable products and strict adherence to U.S. export control laws such as ITAR and EAR.

Wood Container and Pallet Manufacturing

POSTED

about 15 hours ago

DEADLINE

GTI VibePro Modernization Service

Solicitation # 80NSSC26943499Q

NASA Shared Services Center is seeking capability statements for GTI VibePro Modernization Services FY26 to align VibePro software with NASA information technology security requirements. The project is divided into two primary phases: Phase 1 focuses on Identity and Security Modernization by replacing legacy SiteMinder and LDAP authentication with an OAuth2/OIDC identity framework for web and iPad applications, while Phase 2 involves Java and Framework Modernization to bring the back-end application up to current technology standards. Key deliverables include a tested web application, updated iPad source code, an AWS Cognito proof-of-concept environment, and a final production build for the NASA deployment pipeline. The government intends to award a sole source contract to Setco Sales Co under the authority of FAR 12.102(a), as they have been determined to be the sole provider of these services. This procurement follows FAR Part 12 for commercial items and services, utilizing NAICS code 333517. Performance is slated for the NASA Marshall Space Flight Center in Huntsville, Alabama, with a period of performance of four weeks after receipt of order. Interested organizations must submit capability statements by 11:00 a.m. CST on October 23, 2026, for the purpose of determining if the procurement will be conducted on a competitive basis. Price quotes will not be accepted or reviewed at this time.

Machine Tool Manufacturing

POSTED

about 15 hours ago

DEADLINE

IBM AIX and Linux Server Consulting Service

Solicitation # 80NSSC26947032Q

Other Computer Related Services

POSTED

about 15 hours ago

DEADLINE

"Provide specialized piping expertise overseeing the Craft Labor/Corrosion Control subcontractor for field modifications at KSC including but not limited to fabrication and installation of piping spool pieces, piping & tubing supports, flared & welded tub

Solicitation # 80NSSC26945986Q

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 15 hours ago

DEADLINE

6" Flex Flo Bodies

Solicitation # 80NSSC26940131Q

NASA Shared Services Center is seeking the procurement of 6 inch Flex Flo Bodies for the A1 test stand at the Stennis Space Center in Mississippi. The requirement involves the casting and machining of seven 6 inch 150 lb flange valve main bodies per drawing LM-7778 and seven 6 inch 150 lb flange valve end housings per drawing LM-7776. The items must be constructed from CF8 Stainless steel conforming to ASTM A351 standards, with casting tolerances adhering to ISO 8062-4:2017 Grade P and S General Tolerance 10. All components must be inspected according to MSS-SP-55 requirements and will undergo pressure testing at 350 psi, with potential non-destructive evaluation for cracks and voids by NASA. The government intends to award a sole source contract to Laurel Machine and Foundry Company under the authority of FAR 12.102(a) and FAR 19.8 as an 8(a) set-aside, as they have been determined to be the sole provider. This procurement is classified under NAICS code 332996 and follows FAR Part 12 procedures for commercial items. The estimated lead time for the project is 12 weeks, and NASA will provide the necessary molds, which must be returned upon completion. Interested organizations were requested to submit capability statements by October 23, 2026, to determine if the procurement should be conducted on a competitive basis.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of NCS Customized Flex-11 Security CabinetThis small business set-aside subcontract through the NASA Shared Services Center involves the procurement of one customized Flex-11 Security Cabinet. The selected contractor is responsible for manufacturing or sourcing the unit, applying specific customizations according to NCS requirements, and managing shipment FOB Destination to the Stennis Space Center in Mississippi. Strict adherence to export control regulations is mandatory, specifically compliance with ITAR 22 CFR Parts 120-130 and EAR 15 CFR Part. The project falls under NAICS code 332322 and requires the delivery of a single, fully completed security cabinet meeting all specified technical standards.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Proprietary Haynes Alloy Sheet SupplyThis subcontract, managed by the NASA Shared Services Center, involves the procurement of proprietary Haynes International alloy sheet materials to support prime contractors on projects at the NASA Glenn Research Center in Cleveland. The scope of work specifically requires the sourcing and provision of Haynes 230, 233, 282, and 244 alloys. The supplier is responsible for delivering the physical alloy sheets along with comprehensive certifications of compliance. This includes verification of AMS specifications regarding mechanical properties and chemistry, as well as the provision of OEM names and lot numbers. This opportunity is designated as a total Small Business Set Aside under NAICS code 331110.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS