This Pre-Solicitation opportunity from Department Of Defense was posted on February 18, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

VALVE,FUEL PRESSURI

Awarded

SPE4A520R0258Federal

Submission Closed03/04/2020, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336412

New

Federal

TURBO SUPERCHARGER / NSN 2950-01-714-4392 / JOINT LIGHT TACTICAL VEHICLE

Solicitation # SPE4A727R0102

POSTED

DEADLINE

Solicitation # SPRPA127QXA54

Solicitation SPRPA1-27-Q-XA54 is a fixed-price request for the procurement of 91 units of Shroud Segment, Turb (NSN 2840-01-700-3955), designated as a critical application item. The requirement is managed by the Department of Defense through the DLA Aviation office in Philadelphia, with Sean Geiger serving as the primary point of contact. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Technical acceptability requires compliance with ISO 9001 or a higher quality management system. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073 and MIL-STD-129, with inspection and acceptance occurring at the origin. Shipping is FOB Destination, and all payment processing must be conducted through the Wide Area WorkFlow (WAWF) system using combined invoice and receiving reports. Key regulatory requirements include the Buy American and Balance of Payments Program, the safeguarding of covered defense information per DFARS 252.204-7012, and a one-year warranty for non-complex supplies. Offerors must be registered in the System for Award Management and provide detailed pricing and commercial status documentation with their proposals.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # N0038327QTA11

Solicitation N0038327QTA11, issued on October 8, 2026, by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the procurement of a Gasoline Engine Guard, identified by NSN 2810-01-737-5535. The government intends to make a single award to a responsible offeror based on a best-value determination where past performance is considered more important than price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System to assign color ratings, while price serves as a secondary factor. Quotations are due by November 9, 2026, and the required delivery period is 90 days FOB Destination to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1 and MIL-STD-129, with specific requirements for domestic and overseas shipments. Contractors must comply with cybersecurity standards outlined in NIST SP 800-171 and DFARS 252.204-7012. Quality management compliance with ISO 9001 or SAE AS9100 is required, and inspection and acceptance will occur at the origin. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment, and compliance with the Buy American and Balance of Payments Program. Offerors must also provide hazardous material certifications and safety data sheets if applicable.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # SPRMM127QMA08

Solicitation SPRMM127QMA08, issued by the DLA Weapons Support Mechanicsburg and NAVSUP Weapon System Support, seeks the manufacture and delivery of one Turbosupercharger, E (NIIN 013298504). The award will be granted to the responsible offeror providing the lowest price technically acceptable offer, evaluated based on technical compliance, price, and supplier risk via the Supplier Performance Risk System. Offerors must provide a 60-day quote validity and identify the Original Equipment Manufacturer if they are a distributor. The item must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073-1 or ASTM D3951-18 depending on the destination. The contract requires electronic submittal of invoices and receiving reports through PIEE-WAWF. Inspection and final acceptance will occur at the origin, specifically at the contractor or subcontractor plant. Key regulatory requirements include compliance with the Buy American Act, cybersecurity maturity model certification, and ISPM 15 for wood packaging. Any changes in design or part numbers require government approval and supporting documentation. The item is destined for the USNS SUPPLY T AOE 6, and all contractual communications and documents are handled electronically via email, facsimile, or the PIEE-EDA web tool.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # SPRPA127QXA28

Solicitation SPRPA1-27-Q-XA28 is a fixed-price request for the procurement of three aircraft turbine frames, identified by NSN 0RH 2840-01-699-6916. Issued by the Department of Defense through the Pa DLA Aviation office in Philadelphia, the requirement is designated as a critical application item and is issued under EAF authority. The delivery timeline is set for 90 days with FOB Destination terms. Inspection and acceptance will occur at the origin, and the contractor must adhere to ISO 9001 or higher quality management standards. The government intends to make a single award based on a best-value determination where past performance is considered more important than price. Past performance will be evaluated using the DoD Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for Item Unique Identification (IUID) and hazardous materials compliance. Payment and invoicing are to be processed electronically via the Wide Area Workflow (WAWF) system. The solicitation also includes strict adherence to Buy American policies and various security prohibitions, including those related to Chinese military companies.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Supply of Combustion Liners (NSN 2840-01-709-1523)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Turbine Engine Blade Supplier (NSN 2835-01-4575652)

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Manufacturing of Seal Retaining Plates (P/N 3014893)This subcontract involves the manufacturing of four precision-machined seal retaining plates for aircraft engine projects under the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for fabricating the plates according to Pratt & Whitney Canada Corp P/N 3014893 specifications, utilizing specialized precision machining equipment suitable for critical application items. Strict quality assurance and inspection protocols must be followed, adhering to MIL-STD-1916, ASQ H1331, and MIL-STD-105/ASQ Z1.4 standards. Additionally, the provider must ensure full compliance with DFARS 252.225-7001 regulations. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Oil Pressure Cover SupplyThis subcontract through the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division involves the manufacture or sourcing of six oil pressure covers under NSN 2840-01-029-5266. The selected provider will supply these components to prime contractors, ensuring all units meet strict quality standards. Compliance requires the use of MIL-STD-1916 for quality inspections and MIL-STD-105/ASQ Z1.4 for determining sample lot sizes, with a mandate for zero non-conformance acceptance. Eligible bidders must possess a valid UEI and CAGE code to participate in this procurement effort.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Heatshield Stiffener Fabrication (NSN 2835-01-324-4956)This subcontract involves the fabrication of 90 heatshield stiffeners for non-aircraft gas turbines to support DLA supply contracts. The manufacturer must produce the units in strict accordance with Basic Drawing NR 53711 5750011 Rev G and Reference Drawing NR 53711 0900-LP-060-4010 Rev 2. All finished and inspected stiffeners must be delivered according to MIL-STD-1916 standards, and the use of additive manufacturing is explicitly prohibited. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. The project falls under NAICS code 336412 and is managed by the DLA Weapons Support ASC Commodities Division within the Department of Defense. Performance for this contract is located in Tracy, California, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Sheet Metal Fabrication - Engine Shroud AssemblyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, involves the precision fabrication of Engine Shroud Assemblies for prime contractors. The scope of work requires specialized sheet metal fabrication adhering to MA-122, surface texture finishing per ASME B46.1, and marking in accordance with MIL-STD-130. To successfully execute the contract, the provider must utilize precision forming equipment and surface texture verification tools to deliver completed assemblies and First Article units. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336412. Strict compliance standards are mandatory, including the maintenance of CMMC Level 2 certification and adherence to Northrop Grumman Licensing Agreements. Interested parties must respond by November 3, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Certification for Aircraft Connector AssembliesThis HUBZone set-aside subcontract, issued by the DLA Weapons Support Fluid Handling Division, involves First Article Testing and Certification for aircraft connector assemblies, specifically for NSN 1710-00-831-6821. The selected contractor will support prime contractors by executing FAT protocols, performing detailed measurements and inspections, and generating formal validation reports to verify manufacturing processes. Performance of these services requires the use of certified metrology equipment and CSI-standard testing capabilities. The project is based in New Cumberland, Pennsylvania, and requires the delivery of one tested unit along with a comprehensive FAT report. Interested parties must respond by November 9, 2026, under NAICS code 336412.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

in 11 days

General Info

Agency

Department Of Defense → DLA Aviation

Contract Value

$459,044

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

Richmond, VA, 23297, USA

Set-Aside

NONE

Awardee

PARKER-HANNIFIN CORPORATION

Award Issued Date

08/11/2020, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedFeb 18

Presolicitation

AwardedAug 11

Contract was awarded

Submission Closed

03/04/2020, 08:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / AgencyDepartment Of Defense → DLA Aviation

Office AddressRICHMOND, VA, 23237, USA

Contacts

Marisa Berestecky

contact@example.gov

+1 (555) 000-0000

Full Description

SYNOPSIS NSN: 2915-01-650-6034 Nomenclature: VALVE,FUEL PRESSURI P/N: 100-0484-02 PR: 80946704 This is not a Critical Safety Item (CSI). It is not a commercial item. Higher Level Quality Management applies. The acquisition is unrestricted other than full & open competition. This is a sole source item coded 3P. This agency does not possess the technical data package for this National Stock Number to evaluate alternate offers. Any manufacturer, other than the approved source, Parker Hannifin, CAGE 99321, interested in submitting a proposal for this item must submit a complete source approval request (SAR), package for evaluation for future procurements. The SAR package will not be considered for the current procurement. Submit SAR packages to: Defense Logistics Agency-Aviation Office of the Competition Advocate ATTN: DSCR-DU 8000 Jefferson Davis Highway Richmond, VA 23297-5100 DELIVERY: 610 days after receipt of order. QUANTITY: 635 each. INSPECTION/ACCEPT: Origin. FOB Origin. The Government intends to place a firm-fixed price, no options delivery order against the OEM's current BOA. The letter solicitation will be issued on or around 04 March 2020 and will close on or around 03 April 2020. The solicitation will not be available via the DLA-BSM Internet Bid Board System (DIBBS) website. You may request a copy by contacting the Acquisition Specialist.