Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Solicitation opportunity from Texas was posted on October 15, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

VALVE,PRESS REDUCING - ref 2095138

Awarded
2095138State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332919
New
DIBBS
Fixed Wire-Wound Inductive Resistor SupplierThis subcontract involves the supply of fixed, wire-wound inductive resistors for prime contractors supporting the Department of Defense under the DLA Weapons Support Active Devices Division. The contractor is responsible for manufacturing or sourcing resistors that strictly adhere to MIL-PRF-39007/6H and MIL-PRF-39007K specifications, with specific requirements for lead finish marking per IPC/JEDEC J-STD-609. Additionally, the supplier must ensure all components comply with restrictions regarding mercury and ozone-depleting substances. The specific deliverable consists of two resistors under NSN 5905-01-052-7182, which must be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. Performance for this contract is centered at Hill AFB. Interested parties must respond by November 11, 2026, regarding this opportunity categorized under NAICS code 332919.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 6 days
NAICS: 332919
New
DIBBS
Supply of Ball Valve Parts Kits (NSN 4820014370644)This subcontract involves the procurement of ball valve parts kits for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The selected provider must source or manufacture kits that strictly adhere to the technical specifications of NSN 4820014370644. All deliverables must comply with MIL-STD-2073-1E for packaging and preservation, as well as MIL-STD-129 for marking requirements. Eligible bidders must be identified as an original equipment manufacturer or distributor with a valid CAGE code and UEI. The performance of this contract will take place in Pearl Harbor, Hawaii. Interested parties must submit their responses by November 16, 2026, under NAICS code 332919.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 11 days
NAICS: 332919
New
DIBBS
MANIFOLD, HYDRAULIC SYS
Solicitation # SPE7M3-27-T-0884
Solicitation SPE7M3-27-T-0884, issued by the DLA Weapons Support Fluid Handling Division, is a small business set-aside for the procurement of one hydraulic system manifold, identified by NSN 4730-01-579-9600 and Caterpillar part number 2518256. The required delivery date is May 24, 2027, with a delivery period of 188 days after order. The item is to be delivered FOB destination to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will also occur at the destination per FAR 52.246-2. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Palletization must follow RP001 guidelines. Offerors must comply with the Buy American Act, the Berry Amendment, and various DFARS regulations regarding cybersecurity, the prohibition of covered telecommunications equipment, and the handling of hazardous materials. Notably, the government will not evaluate or award contracts to offers containing parts produced via additive manufacturing unless specifically authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
NAICS: 332919
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M8-27-T-0532
Solicitation SPE7M8-27-T-0532 is a small business set-aside procurement issued by the DLA Weapons Support Electrical Devices Division for the acquisition of five pressure switches. The items are identified by NSN 5930012187956 and are designated as critical application items, specifically associated with United Electric Controls Co part number E45C-80. Delivery is required within 184 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination, specifically DLA Distribution San Diego. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and labeling and RP001 for palletization. Non-hazardous materials must be packaged per ASTM D3951, while hazardous materials require compliance with FED-STD-313 and TQ requirement IP025. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots under MIL-STD-105/ASQ Z1.4. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 cybersecurity assessments, and HUBZone price evaluation preferences.
DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

in 11 days
NAICS: 332919
New
DIBBS
QUIT CONNECTOR ASSE
Solicitation # SPE7M3-27-T-0847
Solicitation SPE7M3-27-T-0847 is a small business set-aside request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of three Quick Disconnect Assemblies, identified by NSN 4730015929308 and Griswold Industries part number 24319G. The required delivery date is April 22, 2027, with a delivery window of 156 days after the order is placed. The items are to be delivered FOB destination to DLA Distribution San Joaquin in Tracy, California, where both inspection and acceptance will occur. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Compliance with the Buy American Act, the Berry Amendment, and various cybersecurity regulations, such as DFARS 252.204-7012, is mandatory. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 16, 2026, and must include all required representations and certifications, including SAM validation and disclosures regarding covered defense telecommunications equipment.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
NAICS: 332919
New
DIBBS
FITTING, LUBRICATION
Solicitation # SPE7M3-27-T-0889
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
NAICS: 332919
New
DIBBS
AIR DRIER AND COOLER, P
Solicitation # SPE7M3-27-T-0848
Solicitation SPE7M3-27-T-0848 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of eight air drier and cooler pipeline units, identified by NSN 4730-01-576-6805 and part number R955205. The required delivery date is May 20, 2027, with a delivery window of 184 days after the order is placed. Shipping is directed to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951, MIL-STD-129, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. Offerors must comply with the Buy American Act and the Berry Amendment, and any items produced via additive manufacturing are ineligible for award. Administrative requirements include electronic invoicing through Wide Area WorkFlow and registration in the System for Award Management. The procurement is managed by William Cain and falls under NAICS code 332919.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
NAICS: 332919
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M3-27-T-0844
Solicitation SPE7M3-27-T-0844 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of 59 units of pipe elbows, identified by NSN 4730-01-605-1402. The requirement is designated under NAICS code 332919, with a required delivery date of February 12, 2027, and a delivery timeline of 87 days after award. Shipping is established as FOB Origin, with the destination for inspection and acceptance located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 for palletization and MIL-STD-129 for marking and labeling, with ASTM D3951 serving as the general packaging standard. Technical and quality requirements are governed by the DLA Master List, which takes precedence over other packaging standards. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act, cybersecurity reporting requirements under DFARS 252.204-7012, and a prohibition on the use of additive manufacturing unless specifically authorized.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
NAICS: 332919
New
DIBBS
SWITCH ASSEMBLY
Solicitation # SPE7M8-27-T-0533
DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

in 11 days
NAICS: 332919
New
DIBBS
NRP, VENT, VALVE D340
Solicitation # SPE4A7-27-R-X126
Solicitation SPE4A7-27-R-X126 is an Indefinite Delivery Contract (IDC) issued by DLA Aviation for the procurement of one unit of NRP, VENT, VALVE D340 (NSN 1680-01-647-4796). This item is designated as a critical application item and must be manufactured in accordance with TDP Rev A Gen 1. The contract is intended for a base period of five years with a guaranteed minimum of 200 units and a maximum total dollar value not to exceed $349,999.99. Delivery is required 180 days after receipt of order, with both inspection and acceptance occurring at the destination under Firm Fixed Price terms. The contractor must adhere to stringent quality and security standards, including ISO 9001 2015 compliance and a CMMC Level 2 self-assessment. Packaging and marking must comply with MIL-STD-129 and RP001, and sampling shall follow MIL-STD-1916 or ASQ H1331. Award is based on best value, weighing price, past performance via SPRS assessments, and quoted delivery. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. This procurement is not a small business set-aside and incorporates various DFARS and FAR clauses regarding Buy American preferences and prohibitions on contracting with certain foreign entities.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 6 days
NAICS: 332919
New
DIBBS
ADAPTER, STRAIGHT, PIPE
Solicitation # SPE7M3-27-T-0891
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
NAICS: 332919
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-27-T-1464
Solicitation SPE7MC-27-T-1464 is a federal procurement issued by the DLA Weapons Support Maritime Hardware/Electrical for the supply of two safety relief valves. The items are identified as critical application items under NSN 4820016197241 and part number Griswold Industries 86184 P/N 208787-01H. Delivery is required within 285 days after order, with the destination serving as both the inspection and acceptance point. The shipment is to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Environmental restrictions are significant, prohibiting the use of Class I ozone-depleting chemicals and requiring compliance with NAVSEA 5100-003D regarding mercury containment. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, such as the Buy American Act and cybersecurity reporting standards under DFARS 252.204-7012. The solicitation allows for automated award and incorporates a price evaluation preference for HUBZone concerns.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 11 days

AI Contract Overview

Show more

Dallas Area Rapid Transit has issued solicitation number 2095138 for the procurement of pressure reducing valves under NAICS code 332919. The solicitation was posted on October 15, 2025, with a response deadline of October 20, 2025. The place of performance is located in Texas, and the contract is governed by the laws and venue of Dallas County, Texas. The agreement is governed by the Dallas Area Rapid Transit Authority Purchase Order Terms and Conditions, which emphasize strict adherence to technical specifications, drawings, and manufacturer part numbers. Key provisions include destination-based inspection and acceptance, a 30-day payment term for invoices submitted in triplicate, and the Authority's right to terminate for either default or convenience. Sellers must provide certifications confirming they do not participate in the boycott of Israel and are not listed on the Texas Comptroller’s list of entities doing business with foreign terrorist organizations. Additionally, the contract requires compliance with equal opportunity employment practices and prohibits the offering of gratuities to public officials.

General Info

Agency

Texas → Dallas Area Rapid Transit

Contract Value

$3,674.65

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

TX, USA

Set-Aside

NONE

Awardee

EASTERN CIRCLE LLC

Award Issued Date

Documents

1
PDF, High priority: read this first4 pages · contract-document
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Solicitation

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyTexas → Dallas Area Rapid Transit
ContactsNo contacts available
OfficeTX, USA
Organization / AgencyTexas → Dallas Area Rapid Transit
Office AddressTX, USA
ContactsNo contact information available

Full Description

Show more
VALVE,PRESS REDUCING - ref 2095138

More opportunities from Texas → Dallas Area Rapid Transit

Same awarding agency

NAICS: 423450
New
SLED
Trane Duct Furnace SupplyThis subcontract involves the procurement and delivery of heating hardware for prime contractors working on Dallas Area Rapid Transit projects. The scope of work specifically requires the provision of one 150,000 Btu/hr Trane Duct Furnace gas-fired unit heater, which must be delivered to a designated DART facility. The contractor is responsible for managing all freight and delivery logistics to ensure the unit reaches the project site. In addition to the hardware supply, the contractor must provide the most favorable commercial manufacturer warranties available for the equipment. This project falls under NAICS code 423450 and is associated with the Dallas Area Rapid Transit authority in Texas.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 238220
New
SLED
Gas-Fired Unit Heater InstallationThis subcontract involves the removal of an existing duct heater and the installation of a new 150,000 Btu/hr Trane Duct Furnace for prime contractors working on Dallas Area Rapid Transit projects. The scope of work includes the full installation process, functional testing, and verification to ensure the unit is fully operational, concluding with the delivery of a completed service report. Qualified bidders must hold a valid mechanical or HVAC contractor license and strictly adhere to OSHA and DART Safety Protocols. The solicitation was posted on October 31, 2026, with a response deadline of November 6, 2026.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 238220
New
SLED
Remove & Replace Duct Heater
Solicitation # 2098340
Dallas Area Rapid Transit is soliciting bids for the removal and replacement of one 150,000 Btu/hr gas-fired duct heater at the Rail TES Shop Facility located at 3021 Oak Lane, Dallas, Texas. The contract is structured as a Blanket Purchase Order and will be awarded to a qualified firm offering the lowest acceptable pricing. The selected contractor must provide all necessary tools and materials, utilizing certified technicians skilled in heater installation and gas system handling. Performance is expected to be completed within one business day, subject to parts availability and coordination with maintenance personnel. Key requirements include strict adherence to OSHA, DART safety protocols, and mandatory lockout/tagout procedures. Deliverables consist of a fully installed and operational unit, functional testing and verification, and a detailed service report. Bids must reflect FOB Destination shipping terms with freight costs included. Payment terms are Net 30, and the contract includes standard clauses regarding termination for default or convenience. Additionally, vendors must certify that they do not boycott Israel, are not associated with foreign terrorist organizations, and have no conflicts of interest with public officials.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 484110
New
SLED
Specialized Freight & LogisticsThis subcontract for Specialized Freight and Logistics involves providing freight transportation and delivery services for prime contractors working on Dallas Area Rapid Transit projects. The primary scope of work focuses on the transport of conversion kits under FOB Destination terms, requiring the contractor to ensure all materials maintain merchantable quality and strictly adhere to critical delivery schedules. The contractor is responsible for delivering these kits to designated DART facilities for final inspection and acceptance. This opportunity falls under NAICS code 484110 and is associated with the Dallas Area Rapid Transit agency in Texas.
General Freight Trucking, Local

POSTED

6 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 332710
New
SLED
Precision Component Manufacturing (Conversion Kit)This subcontract for Precision Component Manufacturing involves the fabrication and supply of specialized conversion kits for prime contractors working on Dallas Area Rapid Transit projects. The scope of work requires the manufacture of components designed to transition equipment from M.A. to S.I. standards, strictly adhering to provided technical drawings and manufacturers' part numbers. To ensure all S.I. tolerances are met, the contractor must utilize precision CNC machining and rigorous quality control measurement tools. The final deliverable consists of completed and inspected conversion kits. This opportunity is associated with NAICS code 332710 and is managed through the Dallas Area Rapid Transit agency in Texas.
Machine Shops

POSTED

6 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 423860
New
SLED
KIT, CONVERSION, M.A. TO S.I. | 2101625
Solicitation # 2101625
Solicitation number 2101625 is issued by the Dallas Area Rapid Transit Authority for a conversion kit from M.A. to S.I. The procurement requires all bids to reflect FOB Destination shipping terms with freight costs included in the overall price. Time and rate of delivery are critical, as failure to meet specified schedules may result in rejection or termination for default. The contract is governed by the laws of the State of Texas, and the Authority is exempt from state and local sales and use taxes. Payment terms are Net 30, with invoices paid 30 days from the receipt of the invoice or the order, whichever is later. Invoices must be submitted in triplicate and include detailed information such as the purchase order number, item descriptions, quantities, and unit prices. The seller must certify that they do not boycott Israel, are not associated with foreign terrorist organizations, and have not provided gratuities to Authority officials. Additionally, the seller must adhere to equal opportunity employment standards and ensure all deliverables meet the specified drawings and technical requirements.
Transportation Equipment and Supplies (except Motor Vehicle) Merchant Wholesalers

POSTED

6 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 333415
New
SLED
Brake Cylinder Pressure Gauge SupplierThis subcontract involves the supply of specialized brake cylinder pressure gauges for prime contractors working on Dallas Area Rapid Transit projects in Texas. The selected supplier is responsible for manufacturing or sourcing gauges that strictly adhere to designated part numbers and technical drawings, ensuring all components meet the necessary specifications for transit braking systems. The scope of work includes performing rigorous inspections and accuracy tests to verify compliance and guarantee merchantable quality. All verified gauges must be delivered FOB Destination. This opportunity is categorized under NAICS code 333415, with a response deadline set for November 5, 2026.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

6 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 334513
New
SLED
PRESS.GAUGE,BRAKE CYL. | 2101615
Solicitation # 2101615
Solicitation 2101615 is a procurement request by the Dallas Area Rapid Transit Authority for brake cylinder pressure gauges. The contract requires the seller to provide supplies of merchantable quality that conform to all specified drawings, technical requirements, and manufacturer part numbers. Bidders must provide quotes based on FOB Destination shipping terms, with all freight costs included in the overall price. Time and rate of delivery are critical, and failure to meet specified delivery schedules may result in rejection or termination for default. Payment terms are Net 30, with invoices paid 30 days from the receipt of the invoice or the order, whichever is later. Invoices must be submitted in triplicate to the designated email address and include the purchase order number, item descriptions, quantities, and extended totals. The Authority is exempt from Texas state and local sales and use taxes. The agreement is governed by the laws of the State of Texas, with venue in Dallas County. Sellers must certify compliance with various ethical and legal standards, including the prohibition of boycotts against Israel, the absence of interests involving public officials, and the certification that they are not associated with foreign terrorist organizations. Additionally, the seller must adhere to equal opportunity employment practices.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

6 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 332722
New
SLED
Hex Head Cap Screw SupplierThis subcontract agreement establishes a partnership for the supply of hex head cap screws to prime contractors working on Dallas Area Rapid Transit procurement projects. The selected supplier is responsible for the sourcing or manufacture of screws based on specific size and quantity requirements, ensuring all products meet merchantable quality standards and strictly conform to technical specifications and manufacturer part numbers through rigorous inspections. Logistical responsibilities include managing FOB Destination shipping to ensure the timely delivery of conforming hardware to designated locations. This opportunity falls under NAICS code 332722 and is managed by the Dallas Area Rapid Transit agency in Texas, with a response deadline set for November 5, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

6 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 541380
New
SLED
Third-Party Quality Assurance and Testing for Coil UnloaderThis subcontract involves providing third-party quality assurance and testing services for the Dallas Area Rapid Transit agency. The primary objective is to perform independent inspections and technical tests for prime contractors to ensure that Coil Unloader Assemblies conform strictly to all technical drawings and specifications. The selected provider will utilize precision measurement and testing equipment to verify conformity and will be responsible for delivering detailed inspection reports and certificates of conformance. This opportunity falls under NAICS code 541380 and is associated with procurement projects managed by the agency in Texas.
Testing Laboratories and Services

POSTED

6 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 333998
New
SLED
Coil Unloader Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of a complete Coil Unloader Assembly for prime contractors working on Dallas Area Rapid Transit projects in Texas. The selected provider is responsible for manufacturing the assembly in strict accordance with provided technical drawings and manufacturer part number specifications to ensure merchantable quality and suitability for its intended use. The contract requires the completed assembly to be delivered FOB Destination. Interested parties must respond by the deadline of November 5, 2026, for this procurement opportunity categorized under NAICS code 333998.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

6 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 332510
New
SLED
Specialized Pins SupplyThis subcontract involves the sourcing and manufacture of specialized pins for prime contractors working on Dallas Area Rapid Transit procurement projects. The selected provider is responsible for producing hardware components that adhere strictly to exact technical specifications and drawings, ensuring all materials conform to specific manufacturer part numbers through rigorous quality inspections. The scope of work includes the delivery of completed and inspected hardware components shipped FOB Destination. This opportunity is categorized under NAICS code 332510 and is associated with the Dallas Area Rapid Transit agency in Texas.
Hardware Manufacturing

POSTED

6 days ago

DEADLINE

in about 9 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332919
Closed
SLED
Mop and mop refills Bid
Solicitation # B2625497
Philadelphia Health Department

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 332919
Awarded
SLED
ELBOW 90° -8MP- 10T P2C BRASS - REF 2095136
Solicitation # 2095136
Dallas Area Rapid Transit

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 332919
Closed
SLED
Traffic Model Fire Hydrants January 1, 2026 through December 31, 2026
Solicitation # 10082025TrafficModelFireHydrants
Metropolitan Utilities District

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 332919
Closed
SLED
Vacuum Breakers
Solicitation # 25-041-IFB
Lewis County Public Utility District

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 332919
Closed
SLED
Plug Valves
Solicitation # RFQ-WC250765
Westchester County

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 332919
Closed
SLED
Air Release Valves
Solicitation # INF-2025-0359
City of Houston

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 332919
Awarded
SLED
Clow or American Darling Underground Valves
Solicitation # TAMU-ITB-26-4896
Texas A&M University

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 332919
Closed
SLED
Ductile Piping, Couplings, & Valves
Solicitation # 12096
City Of Greensboro

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 332919
Closed
SLED
Combo Air Valves for CC and RC PL
Solicitation # 25-188
Tarrant Regional Water District

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 332919
Closed
SLED
Precision Machined Fitting Supply (Rear Air Ride 90° Fitting)
Dallas Area Rapid Transit

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 332919
Awarded
SLED
FITTING, REAR AIR RIDE 90 DEG - REF 2094850
Solicitation # 2094850
Dallas Area Rapid Transit

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 332919
Closed
SLED
407862 - Dorr-Oliver Check Valves
Solicitation # 407862
Hampton Roads Sanitation District

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS