Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

VALVE, PRESSURE ACTU

Active
SPE7MC-26-T-253FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 20 pressure actuated drain valves, identified by NSN 4820011604977. These valves are designated as critical application items for bleed air systems, featuring an open state at 4 PSIG, a close state at 10 PSIG, a maximum operating pressure of 165 PSIG, and a maximum operating temperature of 1000 degrees Fahrenheit. Approved manufacturers and part numbers include The Boeing Company, Northrop Grumman Systems Corporation, and Aerocontrolex Group. The agreement specifies a delivery timeframe of 74 days with a required delivery date of May 9, 2026, shipping FOB Origin to DLA Distribution San Diego. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements and specifies that inspection and acceptance will occur at the destination.

General Info

Procurement of 20 pressure actuated drain valves delivered to San Diego by May 2026.

Agency

Department Of Defense → SAN DIEGOView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

(1)

SPE7MC-26-T-253F.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SAN DIEGO
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → SAN DIEGO
View Agency Profile
Office AddressUSA
Contacts
Benjamin Nevitt
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,PRESSURE ACTU
VALVE, PRESSURE ACTUATED DRAIN.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
BLEED AIR, OPEN AT 4 PSIG, CLOSE AT 10 PSIG. 165 PSIG MAX OPERATING
PRESSURE, MAX OPERATING TEMP: 1000 DEGREES F.
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 76301 P/N 74J508003-201
NORTHROP GRUMMAN SYSTEMS CORPORATION 76823 P/N 74J508003-201
AEROCONTROLEX GROUP, INC. 96736 P/N 12-1001
NORTHROP GRUMMAN SYSTEMS CORPORATION 06892 P/N 74J508003-201
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014263454 0001 EA 20.000
NSN/MATERIAL:4820011604977
DELIVERY (IN DAYS):0074
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
SPE7MC-26-T-253F
SECTION B
PR: 7014263454 PRLI: 0001 CONT’D
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:04/21/2026 Original Required Delivery Date:05/09/2026
SPE7MC-26-T-253F NSN/Part Number: 4820-01-160-4977 Quantity: 20 EA Purchase Request: 7014263454QTY: 20 Delivery: 74 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-254Z
This solicitation, issued by the Defense Logistics Agency under solicitation number SPE7MC-26-T-254Z, is for the procurement of one ball valve, identified by NSN 4820-01-641-6424. The contract requires delivery within 200 days after receipt of order and falls under NAICS code 336310. The agreement incorporates strict technical and quality standards, including DLA packaging requirements and higher level quality controls. Notably, the item contains technical data subject to ITAR or EAR export controls, meaning prior authorization from the Department of State or Commerce is required for export. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
CAP VALVE CYLINDER
Solicitation # SPE7MC-26-T-238R
This contract is for the procurement of two valve cylinder caps, identified by NSN 4820011084271 and part number T192019 from Curtiss-Wright Electro-Mechanical Corp. The order is designated as a critical application item with a delivery requirement of 118 days after receipt of order, targeting a required delivery date of March 30, 2027. Shipping is set as FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions are explicitly stated, prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Technical and quality requirements are governed by the DLA Master List, and any substitute chemicals must be submitted for approval unless already authorized by specification requirements.
DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-08M3
This contract is for the procurement of three O-rings under solicitation number SPE7L1-26-T-08M3 for the Department of Defense Land Supply Chain. The items are identified by NSN 5331017061611 and are associated with part numbers from Berg Manufacturing, Inc. and Danfoss Power Solutions II, LLC. Delivery is required within five days of order, with the final destination and inspection point set as the Sierra Army Depot in Herlong, California. The contract mandates strict adherence to DLA packaging and quality requirements, specifically citing the need for medium duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117 to protect the items from ultraviolet ray deterioration. Shipping must be conducted via the fastest traceable means, excluding parcel post, and must comply with MIL-STD-129 marking and RP001 packaging standards. The original required delivery date is listed as September 8, 2026.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-08T4
This contract is for the procurement of 275 O-rings, identified by NSN 5331-01-710-7201 and Mag Aerospace Industries part number 1760794. The items are designated as critical application components with a non-extendable shelf life of 18 months. Delivery is required within 32 days, with the final destination being the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to technical and quality requirements, including FAA airworthiness approval and supply chain traceability documentation. Due to the risk of deterioration from ultraviolet rays, the items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the shipment must follow DLA packaging requirements for procurement.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
SHROUD, FAN, RADIATOR
Solicitation # SPE7L4-26-U-1138
The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7L4-26-U-1138 for the procurement of two radiator fan shrouds. The items are identified by NSN/Part Number 2930-01-576-8568 and are associated with purchase request 1000240622. This federal solicitation was posted on August 24, 2026, and requires a response by the deadline of September 8, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336310
New
DIBBS
PUMP, FUEL, METERING AND
Solicitation # SPE7L1-26-T-08M1
This contract, identified as SPE7L1-26-T-08M1, is a federal solicitation issued by the Department of Defense Land Supply Chain for the procurement of one fuel metering and distributing pump. The required item is identified by NSN 2910-01-669-0954 and Perkins Engines Inc part number 2644P501. Delivery is required within 20 days, with a required delivery date of September 8, 2026, and the shipping destination is Joint Base Pearl Harbor-Hickam in Hawaii. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-2073-1E and MIL-STD-129. Terms specify that the delivery is FOB Origin, while both inspection and acceptance will occur at the destination. The contract also requires the removal of government identification from any non-accepted supplies and follows specific palletization requirements outlined in RP001.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
FUEL CONTROL, STARTI
Solicitation # SPE7L3-26-T-230F
This contract is a solicitation for the procurement of two fuel control starting units, identified by NSN 2910-01-731-3800 and part number A3318 from Electronic Concepts and Engineering Inc. The order is issued by the Department of Defense Land Supplier Operations Vehicle Support under solicitation number SPE7L3-26-T-230F. Delivery is required within 20 days after receipt of order, with a final required delivery date of August 20, 2026. The items are to be shipped FOB Origin to Assault Craft Unit 4 in Virginia Beach, Virginia, using the fastest traceable means. The agreement mandates strict adherence to DLA technical and quality requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies. There is a strict prohibition on the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific functional requirements such as batteries or sensors. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA packaging requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-Q-1617
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 1,540 O-rings under NSN 5331-01-601-4559. The contract is open for full and open competition with a delivery requirement of 124 days after the order is placed. The place of performance is located in New Cumberland, Pennsylvania, and the procurement falls under NAICS code 336310. The agreement incorporates several technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. A critical material constraint is that all supplied items must be completely free of asbestos, and any alternative materials must be approved according to specific contract clauses. This solicitation was posted on September 9, 2026, with a response deadline of September 18, 2026.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336310
New
DIBBS
COOLLY, FUEL
Solicitation # SPE7L1-26-U-0708
This procurement contract, identified as solicitation SPE7L1-26-U-0708, is issued by the Department of Defense Land Supply Chain for the acquisition of fuel-related components. The contract specifies the procurement of eight units of NSN 2910-12-380-6134, identified as part number 5562000975 from MTU Friedrichshafen GmbH. The delivery requirement is set for 74 days after order, with shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, specifically citing ASTM D3951 and MIL-STD-129 for marking and labeling. All technical and quality requirements are governed by the DLA Master List, which takes precedence over other packaging standards. The contract is managed by Jennifer Payne and falls under NAICS code 336310.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336310
New
DIBBS
PUMP, FUEL, METERING AND
Solicitation # SPE7L4-26-U-1231
This contract, identified as SPE7L4-26-U-1231, is a total small business set-aside solicitation issued by the Department of Defense through the LSO Combat Vehicles and Armament. The procurement is for 20 units of a fuel metering and distributing pump, specifically Textron Ground Support Equipment Inc. part number 20-10-0107 and NSN 2910-01-564-4377. The delivery is required within 74 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-129 for marking and labeling and ASTM D3951 for packaging, though DLA Master List technical and quality requirements take precedence. The contract also specifies the removal of government identification from any non-accepted supplies. This procurement falls under NAICS code 336310 and is managed by the DLA Direct coverage for CONUS.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L3-26-T-229W
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of one O-ring under part number 5331-01-718-7558. The contract requires delivery within five days after receipt of order and mandates strict adherence to technical and quality requirements, including specific DLA packaging standards and the removal of government identification from non-accepted supplies. All supplied items must be completely free of asbestos. Suppliers must comply with the current revision of the source control drawing. Those not listed as approved sources are required to obtain source approval from the original equipment manufacturer and submit the relevant technical data package or certification to the DLA with their offer. The solicitation is open for responses until September 21, 2026, and falls under NAICS code 336310.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
SHROUD, FAN, RADIATOR
Solicitation # SPE7L1-26-T-08F8
This contract is for the procurement of one radiator fan shroud, identified by NSN 2930015819901 and Oshkosh Defense part number 3813240. The order is managed by the Department of Defense Land Supply Chain under solicitation SPE7L1-26-T-08F8. Delivery is required within five days after order, with a required delivery date of September 8, 2026. The item is to be delivered FOB Origin to the III Corps Tactical Area at Fort Hood, Texas. The supplier must adhere to specific DLA technical and quality requirements, including RP001 for packaging and RQ017 for physical item marking in accordance with MIL-STD-130N. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA procurement standards. Inspection and acceptance will take place at the destination. Shipment must be handled via the fastest traceable means, specifically excluding parcel post.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → SAN DIEGO

Same awarding agency

NAICS: 332913
New
DIBBS
VALVE, FLUSH
Solicitation # SPE8E8-26-T-5324
The Defense Logistics Agency under the Department of Defense is soliciting bids for the procurement of 200 flush valves, identified by NSN/Part Number 4510-01-579-3370. This federal requirement is listed under solicitation number SPE8E8-26-T-5324 and falls under NAICS code 332919. The solicitation was posted on August 25, 2026, with a response deadline of September 8, 2026. Interested parties should direct inquiries to the primary point of contact via the provided DLA email or through the DIBBS portal using the solicitation number.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-228F
This contract is for the procurement of 45 check valves, identified by NSN 4820009175350, for use on CH-54A and CH-54B Sikorsky cargo transport helicopters. These valves are designated as critical application items designed for hydrocarbon fuels and oils, featuring a maximum pressure rating of 3000 PSI and a temperature range from minus 65 to plus 275 degrees Fahrenheit. The specifications require 1/4 inch OD tube fittings with 7/16-20 UNF-3A threads, with acceptable material codes C or J. The order is managed by the Department of Defense via DLA Distribution San Diego, with a required delivery date of July 21, 2027. Compliance with DLA packaging requirements, ASTM D3951, and MIL-STD-129 is mandatory. The contract includes specific quality and technical requirements regarding configuration change management and the removal of government identification from non-accepted supplies. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332911
New
DIBBS
VALVE, LIFT-CHECK
Solicitation # SPE7MC-26-T-253V
This contract is for the procurement of 14 lift-check valves, identified by NSN 4820009713567 and part number 128H10107-1. These critical application items feature aluminum bodies with steel seats, a nominal offset distance of 0.515 inches, and are designed for use with hydrocarbons, fuel, and oil. The valves must withstand a maximum operating pressure of 3,000 PSI and a maximum operating temperature of 160 degrees Fahrenheit, utilizing female threaded bosses with 0.437 inch UNJF RH specifications and Class 3 threads. The order is managed under solicitation SPE7MC-26-T-253V with a required delivery date of January 6, 2027, and a need ship date of July 10, 2026. Delivery is FOB Origin with inspection and acceptance occurring at the destination, DLA Distribution San Diego. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001, while adhering to the technical and quality standards set forth in the DLA Master List.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, STOP-CHECK
Solicitation # SPE7MC-26-T-253U
This contract, identified as solicitation SPE7MC-26-T-253U, is for the procurement of two stop-check valves with NSN 4820-01-248-3707. The required hardware features a 14 inch bronze body with flange end connections and a 150 PSI rating, specifically identifying Hunt Valve Company part number ASIB1221E1-14. This is designated as a critical application item. The contract mandates that mercury or mercury-containing compounds shall not be intentionally added or come in direct contact with the supplies, except for specific functional exceptions defined by NAVSEA. The order is managed by the Department of Defense through DLA Distribution San Diego, with a required delivery date of July 1, 2027, and a delivery window of 282 days after the order. Shipping is FOB Origin with inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Technical and quality requirements are governed by the DLA Master List, and the removal of government identification from non-accepted supplies is required per RQ011.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, ANGLE
Solicitation # SPE7MC-26-T-253Q
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-228E
Solicitation SPE7MC-26-T-228E is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of two safety relief valves, identified by NSN 4820014792451 and Dante Valve Company part number BAMAA06MHH. This requirement is designated as a small business set-aside under NAICS code 332911. The delivery timeline is set for 160 days after the order, with shipping terms as FOB Origin and the final destination for both inspection and acceptance located at DLA Distribution San Diego. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with additional palletization requirements specified in RP001. Technical compliance includes the removal of government identification from non-accepted supplies and strict limitations on the use of mercury per NAVSEA 5100-003D. Because the manufacture of these valves may require specific casting or forging tooling that the government does not possess, contractors are directed to the DLA Casting and Forging Assistance Request process for sourcing support. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American and Balance of Payments Program.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 423810
New
DIBBS
Supply of Gate Valves (NSN 4820-01-550-3213)
Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
Supply of Poppet-Precheck Valve Assemblies
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
Storage Battery Supplier (NSN 6140-01-108-2159)
Battery Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 423450
New
DIBBS
Supply of Fireman's Helmets (NSN 4210-01-493-7428)
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
Aircraft Check Valve Supplier (NSN 4820000617878)
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-Q-2383
Solicitation SPE7L7-26-Q-2383 is a Firm Fixed Price request for quotations issued by DLA Land and Maritime for the procurement of storage batteries with F2 terminals, identified by NSN 6140-01-108-2159. The requirement consists of three line items totaling 20 units, distributed across delivery locations including Barksdale AFB, Portsmouth Naval Shipyard, and the USS Jack H. Lucas. Acceptable components include part numbers 4840501 from Hill-Rom, Inc. and PS-1270 or PS-1270 F2 from Power-Sonic Corporation. The batteries must be sealed, charged lead-acid chemistry with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with FOB and inspection/acceptance points set at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a general requirement for zero non-conformances in sample lots. Additionally, the contract mandates compliance with hazardous material shipping regulations under IP025 and prohibits the intentional addition of mercury, except where functionally required. Quotations must be submitted to the DLA Land and Maritime office in Columbus, Ohio, by September 18, 2026.
Battery Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS