Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Vehicle Inspection and Acceptance Support

Active

Federal

Response Deadline08/14/2026, 10:30:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires on-site technical inspection and verification of vehicles at either the Dhaka Embassy Annex or Chattogram Port to ensure full compliance with designated specifications before formal acceptance. The work is critical to confirming that all delivered vehicles meet the required standards for performance, safety, and configuration as outlined by the US Embassy Dhaka. Inspections must be conducted thoroughly and documented accurately to support final acceptance decisions, with location flexibility between the two specified sites depending on operational needs. The contract, titled Vehicle Inspection and Acceptance Support, is classified as a subcontract under NAICS code 541330 and was posted on July 29, 2026, with a response deadline of August 14, 2026, at 10:30 AM. Performance is centered in Dhaka, Bangladesh, with the zip code 1212 indicating the primary place of work. Although the contracting agency is listed as US Embassy Dhaka, the associated organization is incorrectly identified as the International Boundary and Water Commission: US-Mexico, which may reflect a data inconsistency. All prospective bidders must submit proposals by the deadline to be considered for this technical support role vital to vehicle procurement integrity.

General Info

On-site vehicle inspections in Dhaka or Chattogram to verify compliance with US Embassy specifications before acceptance.

Agency

International Boundary And Water Commission: Us-Mexico → US Embassy DhakaView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Dhaka, BD-C, 1212, BGD

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 10:30:00 AM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyInternational Boundary And Water Commission: Us-Mexico → US Embassy Dhaka

ContactsNo contacts available

OfficeN/A

Organization / Agency

International Boundary And Water Commission: Us-Mexico → US Embassy Dhaka

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site technical inspection and verification at Dhaka Embassy Annex or Chattogram Port to confirm vehicle compliance with specifications prior to acceptance.

Similar Contracts

Same NAICS industry code

DEP-BWR-RFQ-2027-DWINSA-PRF77 CAT D5 & F

Solicitation # BD-27-1045-BWR00-BWR01-131881

MassDEP is soliciting responses to establish a list of pre-qualified consulting engineering firms to provide specialized services related to drinking water infrastructure through the existing PRF77 Statewide Contract Categories D5 Permitting and Reporting – Water and Wastewater and F Environmental Strategy. The solicitation, identified as DEP-BWR-RFQ-2027-DWINSA-PRF77 CAT D5 & F with solicitation number BD-27-1045-BWR00-BWR01-131881, was posted on July 29, 2026, with responses due by August 31, 2026. Bidders must demonstrate experience and capability in supporting drinking water systems through engineering consulting services within the scope of the referenced contract categories. The contract will be administered by the Bureau of Water Resources under the Massachusetts Department of Environmental Protection, with all work expected to be performed primarily in Boston, Massachusetts. Interested firms should submit their proposals through the designated Commbuys portal and must meet the prerequisites for inclusion on the PRF77 contract. Casey McLaughlin of the Bureau of Water Resources is the primary point of contact for inquiries regarding this procurement.

BWR00 - Bureau of Water Resources

POSTED

about 10 hours ago

DEADLINE

in about 1 month

26RFSQ71 Small Roadway and Drainage Engineering Services

Solicitation # 26RFSQ71

Williamson County is seeking qualified engineering firms to provide services supporting small drainage and roadway projects under multiple county programs including the Road Bond Program, Road and Bridge Division, Development Services & Drainage Division, and County Facilities. The county anticipates selecting approximately three firms to assist staff in the planning, design, and execution of these projects, though the Commissioners Court retains the discretion to choose more or fewer firms based on need and evaluation. Firms must submit their qualifications in response to solicitation number 26RFSQ71, with submissions due by August 18, 2026. The procurement is open to all eligible firms without set-aside restrictions and will be administered by the county’s Purchasing Department based in Georgetown, Texas. Primary points of contact for inquiries are Fernando Ramirez and Joy Simonton, with Kerstin Hancock serving as deputy purchasing agent. All inquiries and proposals should be directed through the official Texas SmartBuy portal.

WILLIAMSON COUNTY

POSTED

about 11 hours ago

DEADLINE

Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires comprehensive quality assurance and inspection services to ensure compliance with military and industry standards for product acceptance. This includes performing first article inspections, in-process quality checks, and final acceptance sampling according to MIL-STD-1916 or ASQ H1331, with strict acceptance quality levels of 0.1 for critical defects, 1.0 for major defects, and 4.0 for minor defects. All inspection activities must be thoroughly documented with detailed test reports and formal non-conformance records to maintain traceability and accountability throughout the production lifecycle. The work is scoped as a subcontract under a total small business set-aside designation, specifically targeting SBA-certified small businesses, and is classified under NAICS code 541330 for architectural and engineering activities. The solicitation was posted on July 29, 2026, with responses due by August 12, 2026, and is managed by the ASC Commodities Division under the Department of Defense. The place of performance and specific office address details are not provided, but all work must be executed in accordance with the referenced standards and reporting requirements outlined in the technical specifications.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Construction Management (CM) & Constructability Review (CR) Services For The North Park| Mid-City Howard Bikeway Project

Solicitation # 20260728034

The contract invites bids for Construction Management and Constructability Review services for the North Park | Mid-City Howard Bikeway Project in San Diego, California, under solicitation number 20260728034. The work is being procured by the San Diego Association of Governments (SANDAG), a SLED-level agency, with a North American Industry Classification System code of 541330, indicating professional, scientific, and technical services related to architectural and engineering activities. The solicitation was posted on July 29, 2026, and responses are due by August 22, 2026. Performance of the contract will occur entirely within San Diego, California, focusing on ensuring the bikeway project’s design is feasible, efficient, and compliant with construction standards through expert review and management. Paola Neira of SANDAG serves as the primary point of contact, reachable via phone at 619-595-5308 or email at paola.neira@sandag.org for inquiries related to the bid. There is no set-aside designation for small businesses or other categories, meaning the opportunity is open to all eligible vendors. The bid amount is listed as $16, which may reflect a nominal fee for accessing the solicitation or a placeholder value, as the actual contract value is not specified. Interested parties must access the full solicitation and submit responses through the provided BidAmerica portal link.

SAN DIEGO ASSOCIATION OF GOVERNMENTS (SANDAG)

POSTED

about 13 hours ago

DEADLINE

Crespi To Anza Sewer Rehabilitation Project

Solicitation # 20260728027

The City of Pacifica, California, has issued a solicitation for the Crespi To Anza Sewer Rehabilitation Project with a contract value of $16, under solicitation number 20260728027. The project falls under NAICS code 541330 and is classified as a state, local, or educational entity procurement. Responses are due by September 4, 2026, at 9:00 PM Pacific Time, with the solicitation posted on July 29, 2026. The work is to be performed in Pacifica, CA, specifically in the 94044 zip code area. Primary points of contact for inquiries are Naomi Fuson and Daniel Patten, both reachable via email and phone through the city’s official channels. No set-aside type is specified for this procurement, and while additional organizational details such as office address are not provided, the place of performance and agency information confirm the project’s local scope and oversight by the City of Pacifica.

The City Of Pacifica

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Design Engineering Services For Niland Sidewalk Improvements

Solicitation # 20260728024

Imperial County Department of Public Works in California is seeking qualified firms to provide design engineering services for sidewalk improvements in Niland, with a solicitation number of 20260728024 and a bid amount of $16. The opportunity is classified under NAICS code 541330, targeting professional architectural and engineering services, and is open to SLED government entities. The request was posted on July 29, 2026, with a strict deadline for responses set for July 30, 2026, at 10:00 PM Pacific Time. All work must be performed at the specified place of performance in El Centro, California, with a zip code of 92243. Primary points of contact for inquiries are David Dale, PE, PLS, and Jessica Carrillo, who serve as the main liaisons for this procurement. The solicitation is accessible online via the BidAmerica platform for further details and submission instructions.

Imperial County Department of Public Works

POSTED

about 13 hours ago

DEADLINE

in about 18 hours

Construction Observation Services McAdams Park Renovation Project

Solicitation # 20260728005

The City of Palmdale Public Works Department is soliciting bids for Construction Observation Services for the McAdams Park Renovation Project under solicitation number 20260728005. The bid has a value of $16 and is classified under NAICS code 541330, indicating professional, scientific, and technical services related to architectural and engineering activities. The opportunity is open to SLED government entities and has a response deadline of August 6, 2026 at 9:00 PM Pacific Time. All work must be performed in Palmdale, California, with a zip code of 93550. Roberto Martinez, P.E., serves as the primary point of contact and can be reached via email at rmartinez@cityofplamdaleca.gov or by phone at 661-267-5535. The solicitation was posted on July 29, 2026, and interested parties must submit their responses through the BidAmerica platform using the provided UI link.

City of Palmdale Public Works Department

POSTED

about 15 hours ago

DEADLINE

Technical Documentation & As-Built Package DevelopmentThe contract pertains to the development of comprehensive technical documentation and an as-built package for a Department of Defense project located at Spangdahelm Air Base, with a NAICS code of 541330 indicating services in architectural, engineering, and related technical services. All technical deliverables must include detailed project plans, network diagrams, rack drawings, and final as-built documentation that precisely reflect the physical configuration of the implemented systems, ensuring accuracy and traceability from design to deployment. The work is structured as a subcontract and requires full alignment between documentation and the actual physical setup upon completion. Responses are due by August 12, 2026, with the solicitation posted on July 29, 2026, allowing vendors a four-week window to prepare and submit proposals. The place of performance is specifically designated at Spangdahelm Air Base, and the documentation must be developed to meet the operational and logistical requirements of the facility. While no set-aside classification or point of contact is provided, the emphasis on precise as-built records suggests a high-stakes environment where documentation fidelity directly impacts maintenance, scalability, and compliance. The contract seeks a vendor capable of delivering precision-engineered technical outputs under the oversight of a federal defense entity.

FA5606 52 Cons Da Lgc

POSTED

about 16 hours ago

DEADLINE

Site and Facility Due Diligence AssessmentThe contract titled Site and Facility Due Diligence Assessment requires the performance of comprehensive structural, seismic, fire safety, and accessibility compliance evaluations necessary for federal lease submissions. The scope includes adherence to the Americans with Disabilities Act Accessibility Guidelines, National Environmental Policy Act requirements, and life safety standards to ensure all facilities meet federal regulatory benchmarks. These assessments are critical to validating the suitability of proposed lease locations and must be conducted with attention to both technical accuracy and regulatory alignment. The work is associated with a subcontract under NAICS code 541330 and is managed by the Department of Agriculture’s FPAC Bus Cntr-Mgmt Svs Division, with performance expected to take place in Derwood. The solicitation was posted on July 29, 2026, with a firm deadline for responses on August 28, 2026, at 8:30 PM. Contractors must be prepared to deliver detailed analyses that support federal leasing decisions, ensuring compliance across multiple domains including accessibility, environmental impact, and building safety without reliance on external documentation or citations.

Fpac Bus Cntr-Mgmt Svs Division

POSTED

about 16 hours ago

DEADLINE

Desktop Data Processing ServicesThe contract titled Desktop Data Processing Services is a subcontract issued by DLA Maritime - Puget Sound under the Department of Defense, seeking post-acquisition processing of mobile mapping data using NavVis software to produce point clouds, 3D models, or annotated deliverables. The work is to be performed in Bremerton, Washington, with a zip code of 98314, and is categorized under NAICS code 541330, which aligns with architectural, engineering, and related services. The opportunity was posted on July 29, 2026, with a strict response deadline of July 30, 2026, at 5:00 PM, indicating a rapid turnaround requirement for proposers. The nature of the task involves specialized technical processing after data collection, requiring expertise in NavVis software to transform raw mobile mapping data into finalized, usable outputs for defense-related applications. No set-aside type or point of contact is specified, suggesting the solicitation may be open to general contractor participation without specific small business preferences.

DLA Maritime - Puget Sound

POSTED

about 16 hours ago

DEADLINE

in about 13 hours

GIS-Based Land Use and Market Area MappingThe contract titled GIS-Based Land Use and Market Area Mapping seeks a small business to develop and maintain geographic information system (GIS) layers that define market areas and analyze land use patterns specifically related to wetland reserve easements. This work involves compiling spatial data and precisely delineating boundaries to support conservation planning and land management efforts. The contractor will be responsible for ensuring the accuracy and integrity of geospatial datasets that inform decisions about land use and environmental protection under federal easement programs. This is a subcontract under a Small Business Set Aside, categorized under NAICS code 541330, and is managed by the Department of Agriculture through the FPAC Bus Cntr-Acq Division. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026. While specific performance locations and point of contact details are not provided, the work is tied to federal conservation initiatives and requires expertise in geospatial analysis, land use modeling, and wetland conservation datasets. All deliverables must align with federal standards for spatial data and support the USDA’s mission in preserving critical natural resources through targeted land use planning.

Fpac Bus Cntr-Acq Division

POSTED

about 16 hours ago

DEADLINE

More opportunities from International Boundary And Water Commission: Us-Mexico → US Embassy Dhaka

Same awarding agency

International Vehicle Transportation and DeliveryThe contract awards international transportation and logistics services for the delivery of procured vehicles to the U.S. Embassy Annex in Dhaka or Chattogram Port in Bangladesh, ensuring full compliance with FAR 52.247-64. The service provider is responsible for end-to-end movement of vehicles from origin to the designated U.S. government locations, handling all customs clearance, documentation, insurance, and regulatory requirements specific to international transport into Bangladesh. The delivery must meet strict timelines and operational standards to ensure the vehicles arrive safely and in compliance with U.S. federal regulations for overseas government procurements. The solicitation is categorized as a subcontract under NAICS code 488410, which classifies it within the support activities for transportation sector. The posting date is July 29, 2026, with a firm response deadline of August 14, 2026, at 10:30 a.m. UTC. The contracting activity is linked to the U.S. Embassy in Dhaka, although the listed organizing entity incorrectly identifies as the International Boundary and Water Commission: U.S.-Mexico, which may indicate a data discrepancy. Performance is required at the Dhaka embassy annex with a designated zip code of 1212, and the provider must be prepared to coordinate with U.S. government representatives to ensure seamless delivery and adherence to all diplomatic and logistical protocols.

Motor Vehicle Towing

POSTED

about 16 hours ago

DEADLINE

Supply of 2.7L Automatic Transmission 4x4 SUVThe contract is for the supply of one new 2.7L automatic 4x4 SUV equipped with a digital dashboard, LED lighting, front and rear cameras, leather seats, and an English-language manual, to be delivered to U.S. government facilities in Dhaka, Bangladesh. The vehicle must meet all specified technical requirements and be delivered to the designated location in Dhaka with the zip code 1212. The solicitation is categorized as a subcontract under the NAICS code 336111, indicating automotive manufacturing, and is issued by the US Embassy Dhaka, though the listed agency organization incorrectly references the International Boundary and Water Commission: U.S.-Mexico, which may reflect an administrative inconsistency. The posting date is July 29, 2026, and responses are due by August 14, 2026, at 10:30 AM, leaving a window of approximately two weeks for submissions. The place of performance is confirmed as Dhaka, and all delivery and compliance obligations are tied to this location.

Automobile Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supply of 2.8L Automatic Transmission 4x4 SUVThe contract requires the supply of a single new 2.8L automatic transmission 4x4 SUV configured for five passengers, equipped with a digital instrument cluster, LED lighting, rear-facing and surrounding cameras, a full leather interior, and an English-language owner’s manual. The vehicle must be delivered to either Dhaka or Chattogram in Bangladesh, with the specified place of performance listed as Dhaka with zip code 1212. The solicitation is classified as a subcontract under NAICS code 336111, which corresponds to motor vehicle manufacturing, and is issued by the US Embassy Dhaka under the organizational umbrella of the International Boundary and Water Commission: US-Mexico, though the actual procurement is intended for use in Bangladesh. The posting date is July 29, 2026, and responses must be submitted no later than August 14, 2026, at 10:30 AM local time.

Automobile Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supply of 2.5L Manual Transmission 4x4 Pick-Up VehicleThe contract calls for the supply of a single new 2.5-liter manual transmission 4x4 pickup truck equipped with specific features including LED headlights, a digital instrument cluster, push-button start functionality, integrated camera systems, and leather interior seating. The vehicle must be delivered to either Dhaka or Chattogram in Bangladesh, with the designated place of performance listed as Dhaka with a postal code of 1212. This is classified as a subcontract under NAICS code 336111, which corresponds to motor vehicle manufacturing, and is issued by the US Embassy Dhaka, though the referenced organization listed for the contract is the International Boundary and Water Commission: US-Mexico, indicating potential administrative or procedural alignment. The solicitation was posted on July 29, 2026, with a response deadline of August 14, 2026, at 10:30 AM, leaving a limited window for interested parties to submit proposals.

Automobile Manufacturing

POSTED

about 16 hours ago

DEADLINE

Brand-New RHD Vehicles 2026

Solicitation # PR16155010

The U.S. Embassy Dhaka is soliciting quotations for the procurement of brand-new right-hand-drive vehicles, including Large SUVs, Mid SUVs, and Pick-ups, under solicitation number PR16155010. This combined synopsis and solicitation is issued under Simplified Acquisition Procedures as outlined in FAR Part 13, inviting all responsible vendors to submit competitive bids. The procurement is targeted for delivery in 2026 and is classified under NAICS code 336110, which pertains to automobile manufacturing. There is no set-aside designated for small businesses or other categories, making the opportunity open to all qualified suppliers. The response deadline for submissions is August 14, 2026, at 10:30 AM Eastern Time, with the solicitation posted on July 29, 2026. The place of performance for this contract is Dhaka, Bangladesh, where the vehicles will be delivered and utilized. Although the contracting office is located at the U.S. Embassy in Dhaka, the official agency listing shows the International Boundary and Water Commission: U.S.-Mexico as the organizational parent, with a mailing address in Washington, D.C. Primary point of contact for inquiries is Shamim Choudhury, reachable via email at choudhurysx@state.gov. Interested parties must comply with all technical and procedural requirements specified in the solicitation and submit their quotations through the SAM.gov platform via the provided UI link before the deadline to be considered for award.

Automobile and Light Duty Motor Vehicle Manufacturing

POSTED

about 16 hours ago

DEADLINE

Technical Compliance & Product Equivalency DocumentationThe contract requires the preparation and validation of technical documentation to prove that non-OEM water distillers perform at or above the level of the specified Durastill model, ensuring equivalency in quality and performance. This effort is critical for demonstrating compliance with the technical standards expected by the US Embassy Dhaka, which is the contracting agency under the Department of State. The deliverables must include detailed testing protocols, performance benchmarks, material specifications, and validation results that clearly align with the Durastill model’s operational parameters and reliability criteria. Subcontractors must submit all documentation by the deadline of August 9, 2026, with work to be performed in Dhaka, Bangladesh, under the NAICS code 541330 for scientific and technical consulting services. The solicitation does not specify a set-aside type or point of contact, and the place of performance is limited to the city of Dhaka with the postal code 1212. Failure to adequately validate equivalency could result in non-compliance, making precision and thoroughness in technical reporting essential. This is a time-sensitive opportunity requiring rigorous data collection and analysis to meet the embassy’s operational needs for reliable water purification systems.

Engineering Services

POSTED

DEADLINE

International Shipping & Logistics (Bangladesh Delivery)The contract entails end-to-end logistics for the international shipment of 34 water distillers from North Brunswick, New Jersey, to Dhaka, Bangladesh, with full responsibility for export documentation, customs clearance at both origin and destination, and final delivery confirmation. The logistics provider must ensure compliance with all U.S. export regulations and Bangladeshi import requirements, delivering the equipment in operational condition to the specified destination in Dhaka with zip code 1212. The scope includes coordination of transportation, handling of all necessary paperwork, and provision of verified proof of delivery upon completion. This is a subcontract under the U.S. Department of State, specifically managed by the US Embassy in Dhaka, with a NAICS code of 488510 indicating it falls under freight transportation arrangement services. The solicitation was posted on July 27, 2026, with a response deadline of August 9, 2026, at 10:30 AM Eastern Time. The place of performance is clearly defined as Dhaka, Bangladesh, and the contractor must adhere to all federal standards for international shipments involving U.S. government-funded equipment. Timeliness, documentation accuracy, and secure transport are critical to fulfilling this obligation.

Freight Transportation Arrangement

POSTED

DEADLINE

Commercial Water Distiller SupplyThe contract entails the supply of 34 commercial-grade water distillation units, specifically the Durastill Model 4696-220V or an equivalent model that meets identical technical standards for performance, durability, and 220V electrical compatibility. These units are required to ensure reliable, high-capacity water purification in alignment with the operational needs of the US Embassy in Dhaka, with all equipment expected to perform under sustained commercial use in a high-demand environment. The technical specifications mandate strict adherence to quality and functional criteria, leaving no room for non-compliant alternatives. The solicitation is issued as a subcontract under NAICS code 335220, indicating classification within the manufacturing of household and commercial water equipment. The opportunity was posted on July 27, 2026, with a firm response deadline of August 9, 2026, at 10:30 AM. The place of performance is clearly defined as Dhaka, Bangladesh, with the zip code 1212, and the contracting agency is the US Department of State through the US Embassy in Dhaka. All units must be delivered and installed at this location, and compliance with local operational and environmental conditions is essential.

Major Household Appliance Manufacturing

POSTED

DEADLINE

Supply of DC POWER SUPPLY 48-63V (Voltage Regulation Unit)The contract pertains to the supply of a regulated DC power supply unit designed for elevator control systems, operating within a voltage range of 48 to 63 volts and fully compliant with original equipment manufacturer specifications for voltage regulation and load requirements. The unit must reliably support critical elevator operations under varying conditions, ensuring consistent power delivery and system stability. The procurement is structured as a subcontract under NAICS code 334318, indicating it falls within the electronic component manufacturing sector, and is issued by the U.S. Department of State through the U.S. Embassy in Dhaka. Performance of the contract is required to take place in Dhaka, Bangladesh, with the delivery of the power supply units localized to meet the operational needs of elevator systems within that region. The solicitation was posted on July 27, 2026, and responses must be submitted no later than August 9, 2026, at 10:30 AM local time. While the contract does not specify a set-aside for small businesses or other socio-economic categories, it is open to qualified vendors capable of meeting the precise engineering and performance standards for the regulated DC power supply. No point of contact is listed, and the physical address details are not provided, though the place of performance is clearly identified as Dhaka with postal code 1212. Interested parties are directed to the SAM.gov link for full documentation and submission guidelines, with the expectation that the supplied units will be integrated into existing elevator infrastructure under the oversight of U.S. diplomatic facilities in Bangladesh.

POSTED

DEADLINE

Supply of EMI FILTER (Electromagnetic Interference Filter)The contract entails the supply of an EMI filter designed to ensure electromagnetic compatibility within elevator control systems, with strict requirements for OEM compliance and comprehensive technical documentation. The product must meet defined standards to mitigate electromagnetic interference and guarantee reliable operation in sensitive environments, aligning with the technical specifications expected by the end user. All submissions must be accompanied by verifiable documentation to prove conformance, manufacturing quality, and compatibility with existing elevator control architectures. The solicitation is issued as a subcontract under NAICS code 334518, with a response deadline of August 9, 2026 at 10:30 AM. The place of performance is listed as Dhaka, with the U.S. Embassy in Dhaka, under the Department of State, acting as the contracting entity. There is no set-aside designation specified, and while no point of contact details are provided, interested parties must submit proposals through the official SAM.gov portal prior to the stated deadline. Compliance with all regulatory, technical, and delivery requirements is mandatory, and failure to provide complete documentation may result in disqualification.

Watch, Clock, and Part Manufacturing

POSTED

DEADLINE

Supply of POWER TRANSFORMER (High-Voltage Transformer)The contract calls for the supply of a high-voltage power transformer specifically designed for elevator system operation, requiring strict adherence to technical specifications to ensure safe and reliable performance. The transformer must be supplied by a qualified manufacturer and include a full manufacturer warranty to guarantee long-term functionality and minimize operational disruptions. The item is intended for deployment in Dhaka, Bangladesh, with the place of performance clearly identified as the 1212 zip code area. This is a subcontract under the U.S. Embassy Dhaka, administered by the Department of State, and the North American Industry Classification System code 335313 confirms the focus on electrical equipment manufacturing. Bidders must submit responses by August 9, 2026, at 10:30 AM, with the solicitation posted on July 27, 2026, providing approximately two weeks for proposal preparation and submission.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Supply of GTI-220SS FAN ASSEMBLY (Cooling System Component)The contract pertains to the supply of two units of the GTI-220SS FAN ASSEMBLY, a critical cooling component designed for elevator power systems, with strict requirements for OEM compliance and a full warranty to ensure reliability and performance. The equipment supports essential infrastructure in Dhaka, where the place of performance is specified with a zip code of 1212, and must meet all technical and quality standards expected for mission-critical applications. The solicitation is issued as a subcontract under NAICS code 333415, which classifies it within the broader category of industrial and commercial machinery and equipment manufacturing. The opportunity was posted on July 27, 2026, with a response deadline of August 9, 2026, at 10:30 AM, indicating a tight timeline for submission. The contracting entity is the US Embassy Dhaka, under the Department of State, signifying the component is intended for use in a U.S. government facility abroad. Although no point of contact or detailed address information is provided, bidders are expected to align with federal procurement guidelines, verify OEM authenticity, and ensure warranty coverage is included as part of the delivery terms. This contract requires precise adherence to specifications without room for deviation, given the operational safety and reliability demands of elevator power systems in a foreign jurisdiction.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE