Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Vehicle Recompete: Fss 47QSWA22D006M

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This Federal Supply Schedule contract, identified as 47QSWA22D006M, is a full-recompete vehicle managed by the General Services Administration's Multiple Award Schedule Contracting Division. The contract has an IDV ceiling of 1,000,000 dollars and is not subject to any specific set-aside restrictions. The current ordering period is scheduled to conclude on June 28, 2027. The contract primarily supports the procurement of specialized marine vessels, as evidenced by significant task orders awarded to the William E. Munson Company. Key acquisitions include various landing craft and boat replacements, with individual order values ranging from approximately 190,000 to 310,000 dollars. The activities fall under NAICS code 336612, focusing on the manufacturing of boats and harbors.

General Info

Federal marine vessel supply contract, $1M ceiling, expires June 28, 2027, no set-asides.

Agency

Department Of The Interior → Multiple Award Schedule Contracting Division Gsa/fas/gss/qsca

NAICS

336612 - Boat Building

Place of Performance

Not specified

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedDec 28

pre-forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Multiple Award Schedule Contracting Division Gsa/fas/gss/qsca

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Interior → Multiple Award Schedule Contracting Division Gsa/fas/gss/qsca

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fss vehicle 47QSWA22D006M ordering period ends 2027-06-28T00:00:00.000Z. 0 active task orders valued at $0.
Federal supply schedule contract Original Solicitation: 47QSMD20R0001 IDV Ceiling: $1,000,000 Set-Aside: No set aside used. Contracting Office: Multiple Award Schedule Contracting Division Gsa/fas/gss/qsca Agencies: General Services Administration Classification: full-recompete (Confidence: high - 85/100)
Top task orders by value: - 30 FT LANDING CRAFT - KETCHIKAN,AK ($310,523) - WILLIAM E. MUNSON COMPANY - 26' PACKMAN WELDED ALUMINUM HIGH SPEED LANDING CRAFT 2026 MODEL FOB DESTINATION: OCEAN SPRINGS, MS 39564 FIRM-FIXED PRICE INCLUDES BOAT, DUAL-ENGINE, AND TRAILER, SHIPPING PER SPECS PLUS GSA INDUSTRIAL FUNDING FEE ($301,570) - WILLIAM E. MUNSON COMPANY - CALO RM BOAT REPLACEMENT ($189,950) - WILLIAM E. MUNSON COMPANY

Similar Contracts

Same NAICS industry code

SHOE SET,COUNTER CL

Solicitation # N0010426QJC25

This solicitation, issued under Emergency Acquisition Authority, is a request for quotes to perform repair services for a Counter Cl Shoe Set. The contract is structured as a firm-fixed-price agreement with an option for increased quantity that the government may exercise within 365 days of the award. The Navy requires a Repair Turnaround Time (RTAT) of 129 days, measured from the physical receipt of the asset at the contractor's facility to the date of final government inspection and acceptance. Failure to meet this turnaround time may result in a per-unit, per-month price reduction, unless the delay is deemed excusable. Contractors are responsible for all inspection and testing requirements in accordance with original manufacturer specifications and must maintain inspection records for 365 days following final delivery. The repair work must adhere to approved technical orders, drawings, and manufacturer standards, and any changes in design or part numbers require formal written approval from the contracting officer. The solicitation also emphasizes strict compliance with cybersecurity maturity model certification requirements, Buy American provisions, and specific marking and packaging standards. All freight is handled FOB Origin, with the Navy managing freight per the Commercial Asset Visibility Statement of Work.

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

20--WINDOW ASSEMBLY,HEA

Solicitation # N0010426RFG69

This contract is a solicitation for the procurement of a Complete Heated Head Window Assembly, designated as Special Emphasis material due to its critical role in shipboard systems where failure could result in serious injury or loss of the vessel. The scope includes strict adherence to specific technical drawings and materials, such as Fused Silica and various stainless steel grades, with mandatory testing for hydrostatic pressure, optical performance, thermal shock, and intergranular corrosion. The contractor is required to maintain rigorous quality control, including full traceability of raw materials and adherence to federal and military thread inspection standards. Key administrative requirements include the use of the Wide Area Workflow (WAWF) for payment and certification submissions, with a delivery schedule requiring certification data to be submitted 20 days prior to delivery and final material delivery within 365 days of the contract effective date. The order is DPAS DO-rated for national defense use and includes a one-year warranty from the date of delivery. All production and repair welding or brazing must be performed by qualified personnel with approved procedures, and any deviations from the established configuration require formal approval from the Contracting Officer.

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in about 1 month

20--PRAIRIE AIR,STBD, IN REPAIR/MODIFICATION OF

Solicitation # N0010425QUB66

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg under number N0010425QUB66, seeks fixed-price repair services for the PRAIRIE AIR, STBD component identified by NSN 7HH 2010-01-325-5726, with an initial quantity of five units increased to six. The contract requires all repairs to be performed in accordance with strict military standards, including MIL-STD-2073 for packaging and preservation, MIL-STD-130 for marking, and MIL-STD-129 for labeling, with Unique Item Identification (IUID) compliance mandated under DFARS 252.211-7003. The repair turnaround time is fixed at 168 days from the physical receipt of the F-condition asset at the contractor’s facility, as recorded in the Commercial Asset Visibility (CAV) system, with a 365-day induction expiration period after contract award requiring all assets to be received and initiated for repair within that window. The contractor must provide a monthly throughput capacity and is subject to financial penalties for delays not caused by the government, with a negotiated price reduction per unit per month, up to a maximum amount to be specified by the vendor. Only firm-fixed-price, not-to-exceed, or estimated quotes for repair are acceptable; test and evaluation-only submissions are explicitly barred. All quotes must include unit and total prices, RTAT, new unit price, CAGE codes for award, inspection, and facility locations, cost breakdowns with profit rates, and a quote expiration of at least 90 days. The ultimate awardee must be an authorized repair source, and award will not be delayed to obtain such authorization. Inspection and acceptance are the contractor’s responsibility per FAR 52.246-2, with the government retaining the right to inspect at any time. The contract incorporates numerous FAR clauses including Buy American requirements, Trade Agreements Certification, Combatting Trafficking in Persons, Cybersecurity Maturity Model Certification Level Requirements, and provisions for Changes—Fixed Price and Responsibility for Supplies. Payment must be processed electronically via Wide Area WorkFlow using invoice and receiving report combinations. Proposals must be submitted electronically by email to the designated Point of Contact, Taylor R. Arroyo, with a deadline extended to May 27, 2026. Award will be determined through a trade-off process weighing past performance as the primary factor

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Solicitation # SPE7M4-27-T-1862

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Marine-Grade Cable and Connector SupplierThis subcontract agreement involves the supply of specialized, individually configured connectors and cables for prime contractors working on Met Office deep-sea buoy projects. The supplier is responsible for manufacturing or sourcing components that adhere to strict deep-sea pressure and corrosion specifications, utilizing water-blocked or armored cabling and high-grade materials such as titanium or stainless steel. All deliverables must comply with CPV 34930000 marine equipment standards to ensure durability in extreme underwater environments. The opportunity was posted on October 26, 2026, with a response deadline of November 30, 2026. Classified under NAICS code 336612, the contract focuses on the delivery of precision-engineered marine hardware tailored to the specific technical requirements of the Met Office's deep-sea operations.

POSTED

DEADLINE

in about 1 month

PROPELLER,MARINE

Solicitation # N0010427QUA31

This solicitation, issued by the Navsup Weapon Systems Support Mech office, is for the repair, manufacture, inspection, testing, and packaging of a Left Hand (LH) LCU 1600 Class Marine Propeller (NSN 7HH 2010-01-607-6494). The government is seeking a single award based on a firm-fixed price, where past performance is weighted as more important than price. The scope includes the teardown and evaluation of the asset, with a requested Repair Turnaround Time (RTAT) of 118 days after receipt. Failure to meet this RTAT may result in a price reduction per unit per month, to be implemented via a reconciliation modification. The contractor must be an authorized repair source and adhere to strict quality and technical standards, including NAVSEA drawing 245-5110169 and MIL-STD packaging requirements. Key deliverables include inspection system reports and material composition certifications submitted via DD Form 1423. Administrative requirements include electronic invoicing through Wide Area Workflow (WAWF), Commercial Asset Visibility (CAV) reporting, and compliance with Cybersecurity Maturity Model Certification (CMMC) and IUID requirements. The award will be made to the offeror determined to be most advantageous to the government, considering price and past performance as evaluated through the Supplier Performance Risk System (SPRS).

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Boat Hook Fabrication and CastingThis subcontract involves the fabrication and casting of 220 boat hooks under NSN 2040002689252 for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The selected manufacturer is responsible for the end-to-end production process, including the design and production of casting tooling and molds, the metal casting of hook heads and handles, and the fabrication of 12-foot handles with a minimum diameter of 1-9/16 inches. To successfully execute this contract, the provider must possess specialized metal casting foundry equipment and have access to marine-grade raw metals. The work is to be performed in New Cumberland, Pennsylvania, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Watercraft Panel Floor SectionsThis subcontract involves the supply of specialized watercraft floor panel sections for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The contractor is responsible for manufacturing or procuring NSN 2040-01-657-9505, matching part number A3020118 specifications, sourced from either Wing Inflatables or Air Stream General Construction. All deliverables must adhere to RP001 DLA Packaging Requirements for Procurement and be delivered to the designated DLA receiving point. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 336612. The response deadline for this opportunity is November 5, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

COOLER ASSEMBLY

Solicitation # SPE7M4-27-T-1846

Solicitation SPE7M4-27-T-1846 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 2,000 Cooler Assemblies, identified by NSN 2040-15-021-0703 and part number 00E93401. The solicitation was posted on October 25, 2026, with a response deadline of November 5, 2026. This is not a small business set-aside and falls under NAICS code 336612. The required delivery date is July 17, 2027, with a need ship date of April 6, 2027, and a delivery lead time of 151 days after order. Shipping is designated as FOB Origin, with the final destination for inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including the prohibition of Class I Ozone Depleting Chemicals and compliance with the Buy American Act and Berry Amendment. Packaging must follow ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Additionally, the contractor must comply with cybersecurity standards, including NIST SP 800-171 and DFARS 252.204-7012 for safeguarding covered defense information. Quotes must be submitted via the DIBBS system and may not include parts produced through additive manufacturing unless specifically authorized.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

PANEL FLOOR SECTION, WA

Solicitation # SPE7M4-27-T-1816

Solicitation SPE7M4-27-T-1816, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of six panel floor sections for watercraft, identified by NSN 2040-01-657-9505. The requirement specifies part number A3020118, associated with Air Stream General Construction, Inc. and Wing Inflatables Inc. The contract is not a small business set-aside and falls under NAICS code 336612. Delivery is required by April 10, 2027, with a delivery period of 155 days after order. The terms are FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List requirements and RP001 palletization guidelines taking precedence. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. The contract incorporates various FAR and DFARS clauses, notably those concerning the Buy American Act, safeguarding covered defense information, and prohibitions on certain telecommunications equipment. Compliance with the Hazard Communication Standard for any hazardous materials is mandatory.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Marine Window Supplier (NSN 2090-01-324-5694)This subcontract involves the manufacture or procurement of six specialized marine windows for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The windows must strictly adhere to the technical data packages associated with NSN 2090-01-324-5694, utilizing corrosion-resistant framing and seals to ensure marine-grade durability. The supplier is responsible for ensuring all units are packaged according to MIL-STD-2073-1E and marked in compliance with MIL-STD-129. This opportunity falls under NAICS code 336612 and is intended for providers capable of delivering high-specification components to prime contractors fulfilling DLA supply contracts.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

BEARING, STAVE SHAPED

Solicitation # SPE7M4-27-T-0966

Solicitation SPE7M4-27-T-0966 is a fixed-price contract issued by the DLA Weapons Support Fluid Handling Division for the procurement of 14 stave-shaped bearings, identified by NSN 2010-01-546-1535. The bearings must be manufactured from Orkot Grade TXM plastic composite material or an approved equal, adhering to MIL-DTL-2845E specifications. This is a total small business set-aside under NAICS code 336612. The required delivery date is May 11, 2027, with a need ship date of April 6, 2027, for delivery to DLA Distribution San Joaquin in Tracy, California. The contract contains strict technical and safety requirements, including export-control restrictions under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, specifically prohibiting bulk packaging and the direct application of metal strapping to prevent product deformation. Items must be packaged one part per unit package and overpacked in approved wooden or plywood boxes. Inspection will occur at the destination per FAR 52.246-2, utilizing zero-based sampling plans. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

in about 11 hours

More opportunities from Department Of The Interior → Multiple Award Schedule Contracting Division Gsa/fas/gss/qsca

Same awarding agency

Soil Nailing; Coos and Douglas CountiesThe Department of the Interior is seeking a contractor for soil nailing and stabilization projects at six road sites located within Coos and Douglas counties. These sites are critical for public access, fire suppression response, and the transportation of timber from sale haul roads. The scope of work focuses on storm damage repair and involves the installation of soil nails, reinforced shotcrete, and steel mesh. Additionally, the project requires bank fill embankment, the placement of base aggregate, and the application of asphalt pavement to ensure road stability and longevity.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

LOWER CROOKED RIVER SITE PHASE 1The Lower Crooked River Site Phase 1 project, managed by the Department of the Interior, focuses on improving accessibility and the visitor experience at the Crooked River Recreation Site. Funded by the Great American Outdoors Act, the initiative aims to ensure full compliance with the Americans with Disabilities Act by installing accessible pathways, restrooms, and facilities that meet federal standards. In addition to accessibility upgrades, the project involves paving roads within the site to enhance visitor safety, reduce dust, and lower long-term maintenance requirements. This forecast, categorized under NAICS code 236220, is centered in Oregon and is coordinated by Joseph Duncan.

Commercial and Institutional Building Construction

POSTED

DEADLINE

FY26 Northern Spotted Owl Surveys - BLM Siuslaw Field OfficeThe Department of the Interior is forecasting a contract for Northern Spotted Owl surveys to be conducted within Lane, Douglas, and Benton Counties. This project will support the BLM Siuslaw Field Office and is categorized under NAICS code 541620 for environmental consulting services. The performance of these surveys will take place across various locations within the specified counties. Joseph Duncan serves as the primary point of contact and small business specialist for this procurement opportunity.

Environmental Consulting Services

POSTED

DEADLINE

BIL312D Owyhee FR76 BOSH ARCH SurveysThe Department of the Interior is forecasting a contract for the BIL312D Owyhee FR76 BOSH ARCH Surveys to conduct cultural surveys necessary for the future implementation of the BOSH project. The work is scheduled to be performed in Murphy and is categorized under NAICS code 541620. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5. Interested parties can coordinate with Point of Contact Tyson McAlindin or Small Business Specialist Charles Dodson for further information regarding this forecast.

Environmental Consulting Services

POSTED

DEADLINE

GAOA24 WEW BOARDWALK DESIGN BUILDThe Department of the Interior is forecasting a design-build construction project to replace structurally deficient boardwalks at the West Eugene Wetlands in Oregon. This initiative falls under NAICS code 236220 and is managed by the agency's internal procurement office to ensure the restoration of safe and functional pedestrian access within the wetlands area. The project was posted on March 30, 2026, with Joseph Duncan serving as the primary point of contact and small business specialist. Interested parties can find further details through the Acquisition Gateway, as the agency seeks a qualified contractor to handle both the design and construction phases of the boardwalk replacement.

Commercial and Institutional Building Construction

POSTED

DEADLINE

North Cotterel Fuel BreakThe North Cotterel Fuel Break project, managed by the Department of the Interior, focuses on fire prevention and infrastructure maintenance along the north Cotterell Mountain Range in Declo. The scope of work involves clearing vegetation to reduce fuel loads and performing road improvements across approximately 6.7 miles of existing roadways. These efforts include grading and resurfacing to ensure the roads remain accessible for ongoing maintenance of the fuel break. This opportunity is currently listed as a forecast with a posted date of March 30, 2026, and is categorized under NAICS code 561990. Primary points of contact for the project include Hugo Sanchez and Small Business Specialist Charles Dodson.

All Other Support Services

POSTED

DEADLINE

AML Digital InventoryThe Department of the Interior is seeking a contractor to validate a proposed digital inventory process and execute a comprehensive digital inventory for Abandon Mine Land sites on BLM managed land in Idaho. Utilizing GIS technology, the project aims to identify the majority of these sites and establish a prioritization system for those deemed high risk. This opportunity is forecasted as a Total Small Business Set-Aside under NAICS code 541620. Performance will take place across various locations within Idaho, with coordination managed through the Bureau of Land Management.

Environmental Consulting Services

POSTED

DEADLINE

NSO and MAMU 2026 Amendment 1Coos Bay ORThe Department of the Interior is seeking services to conduct mandatory surveys for Northern Spotted Owls and Marbled Murrelets within upcoming timber sale units in Coos Bay, Oregon. These surveys are a federal legal requirement that must be completed to clear the land for operation before any timber harvesting can take place. This opportunity is currently listed as a forecast under NAICS code 813312. Joseph Duncan serves as the primary point of contact and small business specialist for this requirement.

Environment, Conservation and Wildlife Organizations

POSTED

DEADLINE

GAOA - FISHERMAN'S BEND RECREATION FEE SITE GENERAL RECONSTRUCTION Phase 1The Department of the Interior is forecasting a general reconstruction project for Phase 1 of the Fisherman's Bend Recreation Fee Site located in Mill City. This contract focuses on the comprehensive rebuilding of various structures and infrastructure damaged by fire, including restrooms, pavilions, kiosks, showers, campsites, and RV sites. The scope of work also encompasses the restoration of electrical systems, utilities, host sites, signage, and fencing. Additionally, the project involves the reconstruction of operational facilities such as the staff office, workshop, and equipment storage areas, as well as on-site housing. Site accessibility and logistics will be addressed through the repair of asphalt drives and parking areas. This effort is categorized under NAICS code 236220, with Joseph Duncan serving as the primary point of contact for the acquisition.

Commercial and Institutional Building Construction

POSTED

DEADLINE

NSO Northern Spotted Owl SurveysThe Department of the Interior is seeking a contractor to conduct Northern Spotted Owl surveys within Douglas County for the BLM Medford District. The scope of work includes early season spot checks, three-visit monitoring surveys, and full six-visit protocol surveys to ensure comprehensive wildlife monitoring. This opportunity is categorized as a forecast under NAICS code 541620 for environmental consulting services. Interested parties can coordinate with Joseph Duncan, who serves as both the point of contact and the small business specialist for this requirement.

Environmental Consulting Services

POSTED

DEADLINE

GAOA24 LLCF PARKING LOT EXPANSIONThe Department of the Interior is forecasting a construction project for the expansion of the parking lot at the Lower Lake Creek Recreation Site. This initiative aims to increase overall parking capacity to better accommodate visitors at the site, with the work being performed in Oregon. The project is categorized under NAICS code 236220 for street, highway, and bridge construction. Joseph Duncan serves as both the primary point of contact and the small business specialist for this requirement.

Commercial and Institutional Building Construction

POSTED

DEADLINE

GAOA CANYON CREEK - GENERAL CONSTRUCTION BLM Cascades Field Office The Department of the Interior, through the BLM Cascades Field Office, is forecasting a general construction project at the Canyon Creek Recreation Site in Lower Lake Creek. This initiative utilizes GAOA funds to restore site amenities that were damaged or destroyed during a 2020 wildland fire. The scope of work includes repairing the parking lot, replacing the water system, and installing new picnic tables, fire rings, and kiosks. The project is categorized under NAICS code 236220 and is managed by Joseph Duncan.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

PWB LIN SVO V AMPL

Solicitation # N0010425QZE01

Navsup Weapon Systems Support Mech

POSTED

CLOSED

20--BEARING,STAVE SHAPE

Solicitation # SPE7L126Q0562

DLA Land And Maritime

POSTED

CLOSED

20--BEARING,STAVE SHAPE

Solicitation # SPE7M425T353F

DLA Land And Maritime

POSTED

DEADLINE

20--WINDOW,METAL

Solicitation # SPE7M126T3625

DLA Land And Maritime

POSTED

CLOSED

20--HINGE ASSEMBLY,MARI

Solicitation # SPE7M4-26-T-1672

Defense Logistics Agency

POSTED

DEADLINE

20--INFLATABLE TUBE ASS

Solicitation # SPE7L126T5371

DLA Land And Maritime

POSTED

DEADLINE

20--BRAKE SLIDER

Solicitation # SPE7M026P0952

Defense Logistics Agency

POSTED

DEADLINE

Remanufacturing of Resilient Mounts (OEM-Exclusive Work)

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Hull, Mechanical, and Piping (HMP) Overhaul

POSTED

CLOSED

Inland River Towboat

Solicitation # W912ES26QA015

W07V Endist St Paul

POSTED

CLOSED

Marine Propulsion System Repowering

Department Of Commerce Noaa

POSTED

DEADLINE

Solicitation # N0010425QYL95

Navsup Weapon Systems Support Mech

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS