Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Vehicle Recompete: Idc N0042121D0016

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This is an Indefinite Delivery Contract (IDC) managed by the Naval Air Warfare Center Air Division under the Department of Defense, with an overall ceiling of 28,164,076.85 dollars. The vehicle is classified as a full-recompete and is focused on labor services, specifically covering procurement and research, development, test, and evaluation. The ordering period for this contract is scheduled to end on June 30, 2026. While there are currently no active task orders listed, historical data shows significant activity with J.F. Taylor, Inc., including a procurement labor order valued at 10,972,889.02 dollars and an RDT&E labor order valued at 4,594,604.30 dollars. The contract falls under NAICS code 541330 and was issued without a specific set-aside.

General Info

Naval vehicle recompete contract through June 2026, $28.16M ceiling, focused on labor services.

Agency

Department Of The Navy → Naval Air Warfare Center Air Division

NAICS

541330 - Engineering Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedDec 30

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Naval Air Warfare Center Air Division

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Naval Air Warfare Center Air Division

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Idc vehicle N0042121D0016 ordering period ends 2026-06-30T00:00:00.000Z. 0 active task orders valued at $0.
Labor (ceiling for clins 1001-1003) Original Solicitation: N0042120R0117 IDV Ceiling: $28,164,076.85 Set-Aside: No set aside used. Contracting Office: Naval Air Warfare Center Air Division Agencies: Department of Defense Classification: full-recompete (Confidence: high - 85/100)
Top task orders by value: - LABOR - PROC ($10,972,889.02) - J.F. TAYLOR, INC. - LABOR - RDT&E ($4,594,604.3) - J.F. TAYLOR, INC.

Similar Contracts

Same NAICS industry code

Pure Water Southern California Direct Potable Reuse Testing Facility

Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility

Kiewit Infrastructure West Co. is soliciting proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This opportunity is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330. The solicitation was posted on October 29, 2026, with a response deadline of November 3, 2026. Interested parties should coordinate with the primary point of contact, Sepideh Aria, for further details regarding the submission process and project requirements.

Kiewit Infrastructure West Co.

POSTED

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified DBE and SBE sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. This opportunity is targeted toward firms specializing in administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. The project falls under several NAICS codes, including 541611, 541330, 541512, and 541820. Primary coordination for this solicitation is handled by Liz Jordan-Wettstein at Aanko Technologies Inc.

Aanko Technologies Inc.

POSTED

DEADLINE

Programmable Logic Controller (PLC) Parts

Solicitation # 26-SIMACQ-PD-51-0189

Nswc Philadelphia Division

POSTED

about 2 hours ago

DEADLINE

Yucca Trail Widening Project – Palomar Avenue To La Contenta Road

Solicitation # 20261028047

Town of Yucca Valley

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Civil Engineering Services Hart Street Development Site

Solicitation # 20261028035

Housing Authority of the County of Kern

POSTED

about 4 hours ago

DEADLINE

Orange County Managed Lanes Segment Advancement Study

Solicitation # 20261028007

Orange County Transportation Authority

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Engineering And Traffic Surveys Supporting The Town's Speed Limits To Continue Radar Enforcement

Solicitation # 27-004

The Town of Los Gatos, through its Parks and Public Works agency, is soliciting proposals for solicitation number 27-004 to conduct engineering and traffic surveys across 65 designated roadway segments and all existing school zones. The primary objective is to renew the surveys supporting prima facie speed limits to ensure continued legal radar enforcement in compliance with the California Vehicle Code and AB 382. The selected consultant, who must be a California-licensed Professional Engineer qualified in traffic engineering, will perform speed data collection on 31 high-volume segments using radar and 34 low-volume segments using 24-hour mechanical counters. The scope also requires a review of three years of accident history, field checks of each segment, and the delivery of a final engineering report in searchable PDF format containing 85th-percentile speeds and a speed-limit recommendation matrix. The contract is for a one-year term beginning in January 2027 with no option for renewal. Proposers must submit electronic bids by November 27, 2026, and will be evaluated through a two-phase process consisting of a pass/fail responsiveness check followed by a 100-point scoring system based on qualifications, work plan, price, and references. Awardees must maintain significant insurance coverage, including 2 million dollars in general liability, 1 million dollars in automobile liability, and 1 million dollars in professional liability. The agreement includes strict non-discrimination requirements with potential liquidated damages of 100 dollars per day for non-compliance and allows for termination by either party with 15 days written notice. Payment is structured as monthly invoicing with net 30-day terms.

Parks and Public Works

POSTED

about 7 hours ago

DEADLINE

Surge & Transient System Detailed DesignThis subcontract opportunity with Garney Companies, Inc. involves providing detailed engineering and design services for a municipal wastewater effluent force main surge and transient system for projects within the Charles County Government. The scope of work includes the design of surge tanks, standpipes, and large diameter ductile iron and prestressed concrete cylinder pipe force mains exceeding 36 inches. Additionally, the contractor will perform engineering for bypass pumping, line stops, and pipe tapping, ultimately delivering final stamped design drawings and specifications through 60, 90, and 100 percent submission phases. The procurement is specifically set aside for SBA certified Women-Owned Small Businesses and Department of Transportation Disadvantaged Business Enterprises under NAICS code 541330. Interested parties must submit their responses by November 9, 2026.

Garney Companies, Inc.

POSTED

about 8 hours ago

DEADLINE

City of Thornton 9500 Civic Center Drive Thornton, CO 80229-4326 The City of Thornton

Solicitation # 26-593

The City of Thornton is soliciting proposals for the design of the Quebec Street Widening project, specifically for the area north of 136th Avenue. Identified as Project No. 26-593 and CDOT Project No. SPFF M286-064, this solicitation seeks professional design services to facilitate the infrastructure expansion. Interested proposers can obtain the necessary solicitation documents through the Business section of the official City of Thornton website under Contracts and Purchasing. It is critical for bidders to acknowledge all addenda within their submittals to avoid being deemed non-responsive. The public notice for this opportunity was published in the Northglenn-Thornton Sentinel between October 15 and October 29, 2026.

City of Thornton - Support Services

POSTED

about 14 hours ago

DEADLINE

On-Call Structural and Seismic/Disaster Engineering Services

Solicitation # FAS 2026-037

The City of Seattle Finance and Administrative Services Capital Development division is seeking to establish two on-call contracts for professional structural and seismic/disaster engineering services under solicitation FAS 2026-037. The selected consultants will provide technical expertise on an as-needed basis for small to medium projects throughout the planning, design, procurement, and construction phases, utilizing delivery methods such as Design-Bid-Build, Job Order Contracting, and the Small Works Roster. The scope of work includes structural engineering studies, seismic evaluations, confidence testing, fall protection design, and the preparation of construction documents stamped by a licensed engineer. All deliverables must adhere to specific CAD standards, including software compatibility with AutoCAD 2025.1.3 and AIA/US National CAD Standard V5. Eligible firms must be licensed to practice in Washington State and the City of Seattle, demonstrate experience with current code compliance, and provide three relevant projects completed within the last seven years. The contract features an initial one-year term with up to four optional one-year renewals, for a maximum duration of five years. Evaluation of proposals is based on relevant technical experience (40 percent), approach and methodology (30 percent), and an inclusion plan (15 percent) focusing on women and minority-owned businesses. Responses are due by December 2, 2026, via the OpenGov portal, with a target contract execution date of December 15, 2026. Consultants are required to maintain Commercial General Liability insurance and comply with various local and federal regulations, including ADA and City of Seattle labor ordinances.

Finance and Administrative Services

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Geotechnical Analysis and Stability ModelingThis subcontract for Geotechnical Analysis and Stability Modeling involves providing professional engineering analysis for prime contractors working on Upper Thames River Conservation Authority dam projects in Canada. The scope of work focuses on reviewing structural data and seepage at armour stone retaining walls, confirming embedment depths, and updating slope stability analyses utilizing the Slope/W model. The final deliverables for this engagement include comprehensive Geotechnical Reports and updated Slope/W models. To qualify for this contract, the service provider must hold a valid P.Eng license and ensure all work complies with the Ontario Accessibility Standards and the LRIA Technical Bulletin. Interested parties must submit their responses by November 18, 2026.

Upper Thames River Conservation Authority

POSTED

about 17 hours ago

DEADLINE

R.T. Orr Dam Geotechnical Investigations

Solicitation # 2026-05

The Upper Thames River Conservation Authority is soliciting proposals for geotechnical investigations and assessments of the R.T. Orr Dam located in Stratford, Ontario. The project, which initiates in 2026 and must be substantially completed by March 15, 2027, is based on recommendations from a 2023 Dam Safety Review by D.M. Wills Associates Limited. The scope of work includes reviewing existing structural data, conducting a detailed seepage investigation at the downstream left armour stone retaining wall, performing supplementary field investigations for embankment slope stability, installing two nested monitoring wells in both earth embankments, and updating stability analyses for armour stone structures. All work must adhere to the LRIA Technical Bulletin for Geotechnical Design and Factors of Safety and meet Ontario Accessibility Standards for electronic deliverables. Proposals must be submitted electronically via the bids and tenders platform by 3:00 PM Eastern Daylight Time on November 18, 2026. The selection process utilizes a two-envelope system where technical qualifications in Envelope A are evaluated before the cost proposal in Envelope B is opened. Award decisions are based on best value, considering experience, understanding of the work, proposed methodology, schedule, and cost reasonableness. Selected consultants must provide proof of professional licensing, WSIB standing, and required insurance policies, while maintaining strict confidentiality regarding project information.

Upper Thames River Conservation Authority

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of The Navy → Naval Air Warfare Center Air Division

Same awarding agency

Next Generation Tactical Radio (NGTR)

Solicitation # N00421-27-RFPREQ-TPM209-0199

The Naval Air Systems Command (NAVAIR) is conducting market research to identify potential sources for the Next Generation Tactical Radio (NGTR), a modular Software Defined Radio (SDR) intended for U.S. Navy and Marine Corps aircraft. The NGTR is designed as a form, fit, and function backwards-compatible replacement for the ARC-210 Generation 5 and 6 radios. Key technical requirements include support for voice and data waveforms in the VHF and UHF bands with operational capabilities up to 6 GHz, including specific support for SINCGARS, MUOS, and SATURN. The system must feature a small form factor weighing less than 12.2 pounds, a conduction-cooled unit, and a modular Open architecture utilizing OpenVPX and VNX+ standards to facilitate rapid upgrades and obsolescence management. Security is a critical component of the NGTR, requiring a modular High Assurance Device (HAD) to meet NSA cryptographic and Security Evaluation Requirements Document (SERD) standards, as well as compliance with Zero Trust architecture and Risk Management Framework (RMF) controls. The system must also adhere to NSTISSAM TEMPEST 1-92 and CNSSAM standards. Prospective contractors must demonstrate expertise in agile development, Model-Based Systems Engineering (MBSE), and the ability to obtain Top Secret security clearances. The anticipated acquisition timeline includes an Industry Day in the first quarter of FY27, a final RFP release in the fourth quarter of FY27, and a contract award in the second quarter of FY28, with target fleet delivery scheduled for mid-2034.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

MARINE AIR-GROUND TASK FORCE AGILE NETWORKING GATEWAY LINK (MANGL) CUSTOM SOFTWARE DEVELOPMENT

Solicitation # N00421-27-RFPREQ-TPM209-0212

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Project Management & Systems Engineering SupportThis subcontract opportunity involves providing project management and systems engineering oversight for prime contractors supporting US Navy NAWCAD WOLF radar projects. The selected provider will be responsible for coordinating hardware and software teams through project scheduling, requirements management, and the execution of systems engineering processes. Key deliverables include the production of project schedules, systems engineering management plans, and regular status reports. The role requires specialized expertise in Navy program management lifecycles and a PMP certification. Performance will take place in Sparks, and the contract falls under NAICS code 541611. Interested parties must submit their responses by the deadline of November 12, 2026.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Systems Integration & Qualification TestingThis subcontract for Systems Integration and Qualification Testing supports US Navy NAWCAD WOLF radar projects under the Department of Defense. The selected provider will perform integration and test services, qualification testing, and the development of Engineering Development Modules for prime contractors. Key deliverables include comprehensive test reports and functional modules, requiring the contractor to possess specialized testing facilities capable of simulating radar system components and a deep understanding of Navy qualification protocols. The project is categorized under NAICS code 541380 and will be performed in Sparks. Interested parties must adhere to the response deadline of November 12, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Hardware Engineering & Component DesignThis subcontract for Hardware Engineering and Component Design supports the Naval Air Warfare Center Air Division on US Navy NAWCAD WOLF radar projects. The selected provider will perform critical hardware engineering and design services for prime contractors, focusing on circuit design, component selection, and the creation of hardware specifications to support the LSUP. Key deliverables include prototype components, detailed schematics, and comprehensive hardware design documents. The project requires a partner with specialized manufacturing knowledge regarding OEM components and the capability to manage production-level data. Performance will take place in Sparks, and the opportunity is categorized under NAICS code 334413. Interested parties must submit their responses by the deadline of November 12, 2026.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Embedded Software Engineering & DevelopmentThis subcontract focuses on embedded software engineering and development to support prime contractors on US Navy NAWCAD WOLF radar projects. The primary objective is the development of software components for the AN/SPN-35E Landing System Upgrade, which encompasses software architecture design, coding, and full integration into the radar system. The successful provider must deliver validated source code and software builds while adhering to strict Navy aviation landing system standards. Managed under the Department of Defense for the Naval Air Warfare Center Air Division, the project requires specialized expertise in embedded systems. Performance of the work is located in Sparks, and the opportunity is categorized under NAICS code 541511. Interested parties must submit their responses by November 12, 2026.

Custom Computer Programming Services

POSTED

DEADLINE

Presolicitation Notice – Sole-Source Requirement for SNC Precision Approach Radar (PAR) AN/SPN-35E Landing System Upgrade Program (LSUP) Basic Ordering Agreement (BOA) Task Order (TO).

Solicitation # N00421-26-RFPREQ-TW00000-1864

The Naval Air Warfare Center Aircraft Division Webster Outlying Field Air Traffic Control and Landing Systems Division is seeking a sole-source contractor to execute the Precision Approach Radar PAR AN/SPN-35E Landing System Upgrade Program LSUP. This effort involves comprehensive project management, systems, hardware, and software engineering, as well as integration, testing, and the development of Engineering Development Modules. The scope further includes qualification testing, analysis, and logistics support to facilitate the fabrication, modification, repair, replacement, and upgrade of critical components. The intended source for this requirement is Sierra Nevada Corporation, identified as the Original Equipment Manufacturer with the necessary technical data and expertise to perform the work. The contract is structured as a Cost Plus Fixed Fee arrangement with completion CLINs and is anticipated to run from May 2027 through May 2032. All work is expected to be performed entirely at the contractor site. Under the authority of Title 10 U.S.C. Section 3204 and FAR 6.103-1, the acquisition is designated as other than full and open competition. Interested parties must submit capability statements by November 12, 2026, detailing their technical experience, access to intellectual property, and ability to meet the performance schedule.

Engineering Services

POSTED

DEADLINE

T-6/T-34 Aircraft Maintenance and Contractor Logistics Support (CLS): Request for Proposal (RFP)

Solicitation # N0042126R1011

Solicitation N0042126R1011 is a Request for Proposal issued by the Naval Air Warfare Center Air Division for T-6 and T-34 aircraft maintenance and contractor logistics support. The scope of work includes organizational, intermediate, and on-site depot-level maintenance for T-6 aircraft at NAS Corpus Christi, NAS Pensacola, and NAS Whiting Field, as well as O, I, and D-level support for T-34 aircraft at MCAS Miramar, NAF El Centro, NAS Lemoore, and NAS Oceana. Key deliverables encompass general aircraft maintenance, preservation and depreservation services, detachment mobilization and demobilization, and the provision of functional check flight and aircraft recovery pilots. The contract utilizes an indefinite quantity structure with a mix of firm fixed price and cost-reimbursable CLINs. The government will select a single awardee based on best value using a tradeoff process, with technical capability as the most important factor, followed by past performance, and then price. Technical evaluations are rated from Blue (Outstanding) to Red (Unacceptable), while small business participation is rated on a pass/fail basis. Proposals must be submitted electronically via the PIEE Solicitation Module and must adhere to strict formatting requirements, including the use of specific templates for manning, pricing, and corporate experience. Performance periods are scheduled across multiple years, beginning September 1, 2027. Compliance with various FAR and DFARS clauses is required, including strict adherence to cybersecurity reporting and military marking standards for shipments.

Other Support Activities for Air Transportation

POSTED

DEADLINE

ASTARS III Simulation Lab Engineering SupportThis subcontract focuses on providing specialized engineering services and technical support for the Naval Air Warfare Center Aircraft Division. The primary objective is to support the Airborne Systems Training and Research Support system within the ASTARS III aircraft and simulation lab infrastructure. The scope of work involves delivering critical engineering outputs and technical assistance to prime contractors to ensure the operational success of the simulation lab. The project falls under NAICS code 541330 and requires strict adherence to federal regulations, specifically FAR 52.204-26 concerning the prohibition of certain telecommunications equipment. Managed under the Department of Defense, the contract is centered on high-level technical deliverables essential for naval aviation research and training.

Engineering Services

POSTED

DEADLINE

in about 5 hours

Restricted Site Delivery ServicesThis subcontract for Restricted Site Delivery Services involves the final transport and delivery of equipment for prime contractors supporting Naval Air Warfare Center Air Division projects. The selected provider will haul materials to Building 8115 at the Webster Field Annex in Saint Inigoes, Maryland, ensuring all deliveries are coordinated within designated receiving dock hours and providing confirmed receipt of items upon arrival. Due to the delivery location being within an operational restricted area, all truck drivers must be U.S. citizens to gain access. This opportunity is designated as a total Small Business Set Aside under NAICS code 484220. Responses are due by November 2, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Air-Gas Desiccant Drier SupplyThis small business set-aside subcontract involves the procurement and supply of three brand-name Air-Gas Desiccant Driers for prime contractors supporting the Naval Air Warfare Center Air Division. The specific requirement is for Manufacturer Part Number 0024998501, produced by Kijero, LLC. To be eligible, the provider must maintain authorized distributor status for Kijero, LLC and ensure all items are Trade Agreements Act compliant. The scope of work includes applying Department of Defense unique identification in accordance with DFARS 252.211-7003. Performance for this contract will take place in Saint Inigoes, with a response deadline set for November 2, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Air-Gas Desiccant Driers for AN/SPN-50

Solicitation # N0042127Q1005

Solicitation N0042127Q1005 is a firm fixed-price procurement issued by the Naval Air Warfare Center Air Division for the purchase of Air-Gas Desiccant Driers for the AN/SPN-50, specifically manufacturer part number 0024998501 and national stock number 4440-01-227-2693. This is a brand name procurement for Kijero, LLC, and no substitutions are accepted. The requirement is a total small business set-aside, and the award will be granted to the lowest evaluated price that meets all technical and acceptability standards. All quotes must be submitted via email to Gabrielle King by 4:00 PM Eastern Time on November 2, 2026. To be considered, offerors must be registered in the System for Award Management and provide signed documentation verifying they are an authorized distributor or reseller of the original equipment manufacturer. Submissions must be Trade Agreements Act compliant, include the country of origin, and provide sufficient technical data such as specifications or data sheets. Delivery is required by July 2, 2027, to the facility in Saint Inigoes, Maryland, with the requirement that delivery drivers be U.S. citizens. The contract mandates strict adherence to MIL-STD-130 and MIL-STD-129 for unique item identification and packaging, and invoicing must be processed through Wide Area WorkFlow.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Vehicle Recompete: Idc W58RGZ21D0006

POSTED

almost 2 years ago

DEADLINE

Vehicle Recompete: Idc 140P2023D0008

Dsc Contracting Services Division

POSTED

almost 2 years ago

DEADLINE

Vehicle Recompete: Idc 1305M221DNMAN0007

Department Of Commerce Noaa

POSTED

almost 2 years ago

DEADLINE

Technical Data Package (TDP) and Drawing Compliance

DLA Land Warren

POSTED

almost 2 years ago

CLOSED

over 1 year ago

Vehicle Recompete: Idc 19MJ1922D0001

U.S. Embassy Podgorica

POSTED

almost 2 years ago

DEADLINE

Vehicle Recompete: Idc 19MJ1922D0001

U.S. Embassy Podgorica

POSTED

almost 2 years ago

DEADLINE

Technical Documentation and Compliance Reporting

Aviation Logistics Center (ALC)(00038)

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

PV System Performance Monitoring & Reporting

American Consulate Merida

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

Part Numbers Sole Source to L3 Harris

Solicitation # SPRRA225R0027

Al DLA Aviation At Huntsville

POSTED

almost 2 years ago

CLOSED

over 1 year ago

On-Site Fuel System Diagnostics and Operational Testing

260-NETWORK Contract Office 20 (36C260)

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

C1DA--(612-206) Construct and Renovate for Sterile Processing and Clean Storage Design - Mather VA

POSTED

almost 2 years ago

DEADLINE

Vehicle Recompete: Idc 36C24523D0120

245-NETWORK Contract Office 5 (36C245)

POSTED

almost 2 years ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS