This Sources Sought opportunity from Department Of Defense was posted on March 8, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Virginia Class Propulsor - Most Aggressive Feature (MAF) Follow-On

Closed

N00167-23-D-XXXXFederal

Submission Closed03/22/2024, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation is soliciting proposals for the complete repower of a 30 foot Munson landing craft. The selected contractor will be responsible for the decommissioning and removal of two existing Honda BF250A outboard engines and the procurement and installation of two new Honda BF250D Drive-by-Wire outboards. The scope of work is divided into six phases, encompassing structural transom inspections, the installation of Honda iST electronic control heads at dual helm stations, integration with the SeaStar Power Assist steering system, and a comprehensive fuel system overhaul using USCG Type A1-15 lines. The project concludes with NMEA 2000 network integration, digital gauge installation, and a minimum two hour sea trial to validate performance and safety protocols. To ensure factory warranty coverage, the contractor must maintain active Honda Marine Authorized Dealer or Service Center status. The vessel will be delivered via trailer to the contractor facility, which must provide a secure, fenced yard or indoor shop. Award evaluation is based on a weighted criteria of cost, technical expertise, and TERO status, with a preference for Colville Business Enterprises. Proposals must be submitted in PDF format by November 13, 2026. Final contracts are subject to tribal appropriation and may require a performance bond for values exceeding 100,000 dollars or a 25 percent retainage.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

CONSOL Station InstallationThis subcontract involves the engineering, fabrication, and installation of three Cargo Operations at Sea receiving stations for prime contractors supporting Military Sealift Command tanker projects. The scope of work includes the installation of receiving stations equipped with ROBB or NATO couplings, as well as the integration of swivel joint assemblies, cleats, staples, and line paddley in accordance with drawing 803-2213159G. Additionally, the contractor is responsible for installing hard points for span wires to ensure full operational functionality. Managed by the Department of Defense through Mschq Norfolk under NAICS code 336611, the project culminates in the delivery of three fully installed and tested receiving stations. The solicitation was posted on October 20, 2026, with a response deadline of November 3, 2026.

POSTED

DEADLINE

Deck Equipment & Towing SystemsThis subcontract opportunity, titled Deck Equipment and Towing Systems, involves providing specialized maintenance and installation services for towing and deck hardware. Working under prime contractors for USCG Surface Force Logistics Center dry-dock projects in San Francisco, the selected provider will be responsible for inspecting towline reels and towing system components, as well as the removal and installation of tow reels utilizing heavy lifting gear. The project is issued by the Department of Homeland Security under agency CG-SEA-C23 and is designated as a total Small Business Set Aside. Interested parties must respond by October 29, 2026, for this requirement categorized under NAICS code 336611.

POSTED

DEADLINE

Engine & Machinery InstallationThis subcontract, titled Engine and Machinery Installation, involves providing specialized technical services for prime contractors on USCG Surface Force Logistics Center dry-dock projects in San Francisco. The scope of work focuses on the removal and installation of primary propulsion and power generation machinery, specifically main diesel engines and reduction gears. Additionally, the contractor is responsible for performing precise laser alignment of engines to MEPS generators and jet drives, ensuring all installed machinery is delivered with completed open and inspect reports. Managed by the Department of Homeland Security under agency CG-SEA-C23, this opportunity is designated as a total Small Business Set Aside under NAICS code 336611. The solicitation was posted on October 20, 2026, with a response deadline of October 29, 2026.

POSTED

DEADLINE

Propulsion & Mechanical Systems (Jet Drives)This small business set-aside subcontract involves the inspection, service, and maintenance of water jet propulsion systems for prime contractors supporting USCG Surface Force Logistics Center dry-dock projects. The scope of work includes the renewal of jet drive anodes and the preservation of water jet drives utilizing specialized tooling, culminating in the delivery of serviced equipment accompanied by detailed open and inspect reports. Managed by the Department of Homeland Security under agency CG-SEA-C23, the work is to be performed in San Francisco, California. The opportunity is categorized under NAICS code 336611, with a response deadline set for October 29, 2026.

POSTED

DEADLINE

USCG STA SAN FRANCISCO (45667) FY27 DD REPAIRS

Solicitation # 70Z04027SSBPL27408

The Department of Homeland Security, through the U.S. Coast Guard Surface Force Logistics Center in Norfolk, Virginia, has issued a Sources Sought Notice under solicitation number 70Z04027SSBPL27408 for market research purposes. The objective is to identify capable sources for the FY27 dry-dock repairs of the USCG STA SAN FRANCISCO (45667), with work scheduled to begin on April 19, 2027. The project is anticipated to have a period of performance of approximately 92 calendar days and must be executed at the contractor's own dry dock facility. If a formal solicitation is issued, the government intends to award one contract on a firm-fixed price basis. This opportunity is designated as a Small Business Set Aside under NAICS code 336611. Interested respondents must submit their capabilities by October 29, 2026, to Troy Elliott. Required submission details include company identification, UEI number, business size certifications, a technical statement on how the work will be performed, and evidence of past performance on projects of similar scope. The government will consider economic factors such as crew lodging, messing, fuel, and travel as part of the award evaluation. Respondents are cautioned that no proprietary or sensitive information should be included in their responses.

POSTED

DEADLINE

Intent to Sole Source: INSTALL RETROFIT KIT ON HPAC #1&2

Solicitation # N4215827QS0002

Norfolk Naval Shipyard intends to sole source solicitation N4215827QS0002 for the installation and testing of input module replacements on the #1 and #2 High Pressure Air Compressors (HPAC) onboard a Virginia Class Submarine. The work is scheduled for a period of performance in March 2027 and will be performed in Portsmouth, Virginia. Award will be based on the Lowest Price Technically Acceptable (LPTA) basis, requiring vendors to be registered in the System for Award Management (SAM) and provide a detailed, unpriced capabilities statement for technical review. Quotes must be submitted in Microsoft Word, Excel, or PDF format and include pricing, business size, payment terms, and a point of contact, with shipping terms specified as FOB Destination. The requirement incorporates various FAR and DFARS clauses, including strict cybersecurity and information safeguarding standards such as NIST SP 800-171 and DFARS 252.204-7012. All technical work must adhere to the provided Statement of Work, and responses are due by October 21, 2026.

Norfolk Naval Shipyard Gf

POSTED

DEADLINE

USCGC CROCODILE DD2 FY27 #1 MDE W5

Solicitation # 70Z08027PBPLCROCODILE

The Department of Homeland Security, through the U.S. Coast Guard Surface Forces Logistics Center, has issued a Sources Sought Notice under solicitation number 70Z08027PBPLCROCODILE to conduct market research for the dockside repairs of the USCGC CROCODILE (WPB-87369). This notice is not a formal solicitation but aims to identify capable sources, determine the availability of commercial items, and understand industry practices to inform future competition and set-aside decisions. The anticipated scope of work includes a wide array of ship repair tasks such as hull plating ultrasonic testing, tank cleaning and inspection, propulsion shaft and bearing renewal, main diesel engine W-5 maintenance, rudder assembly renewal, and drydock support. The project is expected to have a performance period of 63 calendar days, tentatively scheduled from April 20, 2027, to June 22, 2027. All work is to be performed at the contractor's facility with no geographical restrictions. Interested firms must submit their capability statements, business size certifications under NAICS code 336611, and past performance evidence to the designated points of contact by October 21, 2026. Respondents must confirm their intent to submit a proposal as a prime contractor and provide detailed company identification and contact information.

POSTED

DEADLINE

TRANSMITTER, RUDDER ANG

Solicitation # SPE4A6-26-T-30WD

Solicitation SPE4A6-26-T-30WD is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of two rudder angle transmitters. The required hardware is identified by NSN 6320002389973 and specifically references Dynalec Corporation part number 2N12TA (IC4BG20-3). This is designated as a critical application item with a required delivery date of January 25, 2028, and a delivery timeline of 487 days after order. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and technical standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance will be conducted using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. A significant environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with the Buy American Act and Berry Amendment. Offers involving additive manufacturing are ineligible for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

WINDSHIELD WIPER ASSEM

Solicitation # SPE7M4-27-T-0338

Solicitation SPE7M4-27-T-0338 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for one windshield wiper assembly, NSN 2090-01-196-0072, part number KS-9180-G. The requirement specifies a need ship date of February 21, 2027, with an original required delivery date of October 31, 2027. Delivery is established as FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Warner Robins at Robins AFB, Georgia. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001, with ASTM D3951 serving as the general packaging standard unless superseded by the DLA Master List of Technical and Quality Requirements. Special environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. Compliance is required for various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-1746

Solicitation SPE7L1-27-T-1746 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 37 angle valves, identified by NSN 4820002789870. This is a restricted source item designated for critical application, requiring engineering source approval by the Government Design Control Activity. The procurement references Milwaukee Valve Company part numbers 1023-001H-1 1/2 and 1023-001J-1 1/2. Delivery is required within 152 days, with the destination for both inspection and acceptance being the Distribution Depot Puget Sound in Bremerton, Washington. The contract mandates strict adherence to quality and environmental standards, including the prohibition of Class I ozone depleting chemicals and specific restrictions on mercury and mercury-containing compounds per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic material preferences, and the prohibition of covered defense telecommunications equipment. The acquisition falls under NAICS code 336611.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

CYLINDER, HYDRAULIC ACC

Solicitation # SPE7M0-27-T-0456

This fixed-price solicitation, issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys, is for the procurement of one hydraulic accumulator cylinder (NSN 2090-01-450-1199). The item is to be delivered to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, with an original required delivery date of September 28, 2026. The procurement requires adherence to Technical Data Package Rev A Gen 2 and Basic Drawing NR 53711 6405530 Revision E. Delivery must be made via the fastest traceable means, and the contract specifies destination inspection and acceptance under FAR 52.246-2. The contract mandates strict compliance with several technical and regulatory standards, including MIL-STD-129 for marking, MIL-STD-130 for Item Unique Identification (IUID), and RP001 for DLA packaging requirements. There are significant restrictions on the use of mercury and a requirement for the safeguarding of covered defense information per DFARS 252.204-7012. Additionally, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved JCP certification and specific DLA authorizations. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days

General Info

Agency

Department Of Defense → Nswc Carderock

NAICS

336611 - Ship Building and Repairing

Place of Performance

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseClosed

PostedApr 5

Sources Sought

Deadline changedMar 8

Response deadline changed from May 2, 2023 to Mar 22, 2024.

Response DeadlineMar 22

Deadline has passed

Submission Closed

03/22/2024, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Nswc Carderock

Contacts2 people available

OfficeBETHESDA, MD, 20817-5700, USA

Organization / AgencyDepartment Of Defense → Nswc Carderock

Office AddressBETHESDA, MD, 20817-5700, USA

Contacts

Jordan Good

Jonathan Mauro

Full Description

N00167-23--XXXX - Request For Information: VIRGINIA Class Propulsor Most Aggressive Feature (MAF) Follow-On. 1. This is not a Request for Proposal (RFP) and an award of a contract will not be made as a result of this posting. The Naval Surface Warfare Center, Carderock Division is hereby issuing a Request for Information (RFI) from all potential sources to provide information regarding the below requirement: The U.S. Navy has fielded an Improved Advanced Hybrid (IAH) Propulsor on a VIRGINIA Class Submarine (VCS). The performance of the IAH warrants the construction of additional IAH Propulsors for installation on future new construction, or backfit, VCS hulls. Part of the IAH Propulsor includes production of the Most Aggressive Feature (MAF) that has considerable long-lead time material (LLTM) associated with its production. This Statement of Work (SOW) is for the procurement of IAH Propulsor MAF, as well as shipping installation fixtures, installation support, and associated engineering services for the Naval Surface Warfare Center, Carderock Division. Reference Title Dwg No. (a) (CONFIDENTIAL) PMAF Interface Control Drawing UTAS Dwg 000-00008161-000 (b) (CONFIDENTIAL) Rotor Type HYDEM Assembly NAVSEA Drawing 245-8328551 (c) (CONFIDENTIAL) PMAF Shipping Fixture Assembly UTAS Drawing 173-00008161-000 2. Interested parties shall identify their manufacturing capabilities in order to support the following requirements: a. Engineering Support Services The contractor shall perform engineering services in support of Hybrid Multi-Material (HMM) propulsor cost reduction tasking, review and design change incorporation, design and drawing creation, or other engineering design-related tasking. b. Installation and Maintenance Support Services The contractor shall perform installation and maintenance support services on VIRGINIA Class Propulsor (HMM) and composite hardware. The contractor shall provide support to the Navy to install the component in Reference (a) into the assembly shown in Reference (b). Government furnished repair procedures will be executed in the installed condition in dry dock when feasible, or with the component uninstalled from the submarine and in a shipyard or industrial environment. c. Manufacturing Plan The contractor will be required to develop a manufacturing plan to address the following items: Manufacturing processes/procedures Versalink Casting Process/Procedure Surface Preparation Process/Procedure Part movement and subcontractor processes/plans d. Quality Management and Quality Assurance Plan The Contractor will be required to maintain a certified Quality Management System in accordance with the requirements of ISO 9001:2015. The contractor will be required develop a Quality Assurance Plan to address how the contractor shall test and inspect material delivered under this contract. The Quality Assurance Plan shall adhere to the requirements of the certified Quality Management System. e. VIRGINIA Class Propulsor MAF The Contractor shall manufacture a maximum of fifteen (15) MAFs within a 5 year contractual period of performance in accordance with reference (a). Each MAF will be manufactured in accordance with an approved Manufacturing Plan and inspected and tested in accordance with the approved Quality Assurance Plan prior to delivery. Installation fasteners, including all bolts, studs, bushings, multi-jack fasteners, and fairing caps as shown on Reference (b) shall be procured and shall be kitted and crated separately. The Contractor shall have the ability to develop or be in agreement with the current vendor for non-metallic material formulation and process specification referenced in HYDEM Assembly requirements or sub-referenced in the PMAF Interface Control Drawing (Reference (a)). This non-metallic material formulation and process specifications are asserted by the contractor to be proprietary. f. Manufacture and Deliver Shipping and Installation Fixture (SIF) The Contractor shall manufacture a maximum of three (3) SIFs within a 5 year contractual period of performance in accordance with Reference (c). Each SIF will be manufactured in accordance with the approved Manufacturing Plan and inspected and tested in accordance the approved Quality Assurance Plan prior to delivery. g. Security The work requires access to classified documents and industrial work areas. The contractor personnel will be required to hold CONFIDENTIAL clearances and the contractor will be required to have a CONFIDENTIAL Facility Security Clearance. This work requires implementing and integrating cybersecurity requirements into the management, administration, and normal safeguarding of system details for a Major Defense Acquisition Program. h. Government Purpose Rights The Government requires purpose rights. The Government shall obtain purpose rights from technical data that is developed and produced throughout the duration of this contract and from any follow-on contract. The contractor shall identify details of any limitation on technical data rights for the specific proprietary information that would not be shared with the Government. IMPORTANT NOTE: AFTER SUBMITTING A RESPONSE TO THIS REQUEST, ALL INTERESTED PARTIES MUST DESTROY THE CONFIDENTIAL DRAWINGS LISTED AS REFERENCES (a, b, and c) IN ACCORDANCE WITH GOVERNMENT APPROVED PROCESSES FOR DESTRUCTION OF CONFIDENTIAL AND PROPRIETARY INFORMATION. IF INTERESTED IN THE ATTACHMENT, PLEASE SEND A REQUEST TO THE CONTRACT SPECIALIST AND CONTRACTING OFFICER ALONG WITH YOUR COMPANY'S CAGE CODE. THE ATTACHMENT WILL ONLY BE PROVIDED TO CONTRACTORS CLEARED BY THE JCP VIA DOD SAFE. ALL REQUESTS SHALL BE SUBMITTED WITHIN ONE WEEK OF THE POSTING DATE IN ORDER TO MEET RFI SUBMITTAL DEADLINES. 3. NSWCCD intends to fulfill this requirement via a hybrid Firm Fixed Price and Cost-Plus-Fixed-Fee Completion Type contract. Vendors interested in competing for this contract are requested to provide the following information pertaining to their supply/service: Company name, address, phone number, primary points of contact(s), email address, business size (large/small), and CAGE CODE Capabilities that are key to meeting the requirements above Anticipated delivery and/or installation time frames for the above requirements Anticipated barriers to a timely proposal submission Anticipated significant program risks or capability gaps and recommended mitigations There is no minimum number of pages; however please limit responses to 7 total pages maximum. 3. Contracting Office Address: Naval Surface Warfare Center Carderock Division 9500 MacArthur Boulevard BLDG 42, West Bethesda, MD 20817-5700 Questions may be submitted to: Jordan Good Jonathan Mauro Contracting Specialist Procuring Contracting Officer jordan.s.good.civ@us.navy.mil jonathan.s.mauro.civ@us.navy.mil 301-227-3603 301-385-5415