This Government Contract opportunity from Department Of Homeland Security was posted on September 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Virtra System Maintenance and Refresh

Closed

20155411Federal

Submission Closed09/15/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and the potential removal and disposal of approximately 600 square feet of asbestos-containing material from the gymnasium floor. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, and a final project completion report. This solicitation is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026. Award selection is based on best value. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes various FAR clauses regarding small business utilization, minimum wages, and the combating of trafficking in persons. Subcontractors are also required to maintain a Unique Entity Identifier (UEI) for reporting purposes.

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Hydrostatic CertificationThis subcontract, issued by the Department of Defense under the Navsup Weapon Systems Support Mech, involves providing specialized non-destructive testing and hydrostatic certification for critical safety items on Naval Sea Systems Command projects. The scope of work includes performing hydrostatic testing at 150 percent pressure, dye penetrant inspections, and quantitative chemical and mechanical analysis of titanium alloys to ensure structural integrity and safety compliance. Qualified contractors must hold a Confidential security clearance and possess ASNT Level II or III certifications to perform these technical evaluations. The primary deliverables for this engagement are certified test reports and detailed analysis data. Interested parties should note the response deadline of November 20, 2026, for this opportunity categorized under NAICS code 541380.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Specialized Aerospace Testing & CalibrationThis subcontract for Specialized Aerospace Testing and Calibration supports NAVSUP Weapon Systems Support projects by providing final testing and inspection of refueling probes for prime contractors. The scope of work involves conducting rigorous testing in accordance with approved repair and overhaul manuals, utilizing special test equipment and calibrated measurement tools that adhere to ANSI/NCSL Z540 or ISO-10012-1 standards. The selected provider is responsible for delivering comprehensive technical documentation, including detailed test reports, dimensional readings, and RFI certification. This effort falls under NAICS code 541380 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flight-Critical Module Testing and CertificationThe Flight-Critical Module Testing and Certification subcontract involves performing final testing and inspection of repaired NRP/NSPR Module Assemblies for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider must execute testing procedures according to approved repair and overhaul manuals, utilizing calibrated measuring and test equipment that complies with NCSL Z540.3 or ISO 10012 standards. The primary deliverables for this engagement include detailed test reports and the certification of Ready For Issue status for every unit processed. This Department of Defense requirement falls under NAICS code 541380, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

CSI Material Testing and Ultrasonic Inspection ServicesThe CSI Material Testing and Ultrasonic Inspection Services subcontract involves providing specialized non-destructive testing and laboratory analysis for prime contractors supporting the Department of Defense, specifically the NAVSUP Weapon Systems Support Mech. The scope of work focuses on the ultrasonic inspection of starting materials and the execution of slow strain rate tensile tests for Level I Special Emphasis material in accordance with DI-QCIC-81110 (SE) standards. To fulfill these requirements, the contractor must utilize professional ultrasonic testing equipment and laboratory-grade tensile machinery. Key deliverables for this engagement include the provision of detailed inspection reports, test certifications, and Certificates of Compliance. This opportunity falls under NAICS code 541380 and has a response deadline of November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Quality CertificationThis subcontract focuses on providing Non-Destructive Testing (NDT) and quality certification services for prime contractors supporting the Department of Defense, specifically within the NAVSUP Weapon Systems Support Mech agency. The scope of work involves executing NDT procedures to ensure material compliance for Special Emphasis Level I safety requirements and conducting quality audits. The selected provider is responsible for preparing detailed records for DCMA and DCAA QAR review and delivering validated inspection records and test reports. To ensure technical accuracy and regulatory adherence, the contract mandates strict compliance with ISO/IEC 17025 and ANSI/NCSL Z540.3 standards. This opportunity falls under NAICS code 541380, with a response deadline set for November 25, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Independent Quality Assurance and Certification ServicesThis subcontract for Independent Quality Assurance and Certification Services supports NAVSUP Weapon Systems Support projects by providing independent verification, calibration, and certification for Special Emphasis Level I materials. The scope of work includes performing hydrostatic testing, dye penetrant inspections, and tool calibration in accordance with ANSI/NCSL Z540.3, as well as the development of Objective Quality Evidence packages. To ensure technical compliance, the contractor must maintain ISO/IEC 17025 accreditation and utilize ANSI/ASQ Z1.4 sampling methods. Final deliverables consist of certified test reports and Certificates of Compliance. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

NDT Inspection and Certification for Naval Pipe FittingsThis subcontract involves providing non-destructive testing and quality inspections for naval pipe fittings on Navsup Weapon Systems Support Mech shipboard projects. The scope of work includes performing hydrostatic testing and dye penetrant inspections on production welds and weld repairs, ensuring strict adherence to MIL-STD-2035, MIL-I-45208, and MIL-STD-45662 standards. The selected provider must maintain ISO/IEC 17025 accreditation and utilize calibrated measurement tools to deliver formal NDT certification reports and signed inspection certificates. The opportunity is categorized under NAICS code 541380 and is issued by the Department of Defense. Interested parties must submit their responses by November 4, 2026, at 8:30 PM. This project focuses on critical quality assurance for prime contractors to ensure the structural integrity of naval components.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Calibration and Testing ServicesThe Precision Calibration and Testing Services subcontract involves performing calibration of test equipment and certified testing of repaired receiver-transmitters for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider will utilize precision calibration laboratory equipment to verify that hardware performance aligns with specific technical specifications. All work must be conducted in strict compliance with a Quality Management System and applicable international, military, or industry calibration standards. The primary deliverables for this engagement include the provision of detailed test reports and calibration certificates. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Canopy Qualification Testing and EvaluationThe Canopy Qualification Testing and Evaluation subcontract involves providing independent laboratory testing and evaluation of canopy prototypes for prime contractors supporting US Air Force flight safety projects. The scope of work includes conducting form, fit, and function testing, environmental stress testing, optical clarity verification, and impact resistance testing utilizing ballistic rigs and environmental chambers. The successful provider must deliver comprehensive test reports and certification documents. To be eligible, the contractor must maintain ISO/IEC 17025 accreditation and possess DD 2345/JCP access. This opportunity is issued by the Department of Defense under agency FA8212 Afsc Olh Pzaba with a NAICS code of 541380. The response deadline for this requirement is February 16, 2027.

FA8212 Afsc Olh Pzaba

POSTED

DEADLINE

AAV Vector Characterization and Quantification ServicesThis subcontract opportunity is for AAV Vector Characterization and Quantification Services supporting biotechnology projects at the VA Harry S Truman Memorial Veterans Hospital under the Department of Veterans Affairs. The selected provider will deliver high-precision analytical testing to verify the purity and integrity of AAV vectors for prime contractors. Key technical requirements include performing fragment analysis of viral genomes and quantitative PCR for vector genome titration, utilizing Agilent Fragment Analyzers and qPCR platforms. The contractor is expected to adhere to GLP standards and provide formal Certificates of Analysis and quantification reports. The work will be performed in Columbia, Missouri, under NAICS code 541380. Interested parties must submit their responses by November 4, 2026.

POSTED

DEADLINE

Satellite Instrument Calibration and ValidationThe Satellite Instrument Calibration and Validation subcontract supports prime contractors on NASA Goddard Space Flight Center projects. The scope of work involves performing detailed performance analysis and calibration for satellite instruments, which includes providing calibration laboratory support and developing specialized strategies, techniques, and algorithms to address various hardware and software challenges. Key deliverables for this effort include comprehensive calibration reports, performance analysis data, and validated instrument algorithms. This opportunity is associated with NAICS code 541380 and will be performed in Greenbelt, Maryland. The solicitation was posted on October 21, 2026, with a response deadline set for December 4, 2026.

NASA Goddard Space Flight Center

POSTED

about 5 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The Department of Homeland Security, Customs and Border Protection, intends to award a sole source contract to Virtra, Inc. for the maintenance and refresh of the Virtra System. This procurement is being conducted under the statutory authority of 41 USC 253(c)(1), as the agency has determined that Virtra, Inc. is the only responsible source capable of satisfying the specific requirements of the project. This notice serves as an intent to acquire services rather than a formal request for proposals, and no set-aside has been applied. While the government is not seeking competitive bids, prospective contractors claiming the ability to perform the work must provide detailed technical documentation. The project is managed by the Mission Support Contracting Division, with the place of performance located in Harpers Ferry, West Virginia.

General Info

DHS CBP sole source contract to Virtra Inc for Virtra System maintenance refresh.

Agency

Department Of Homeland Security → Mission Support Contracting Division

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Harpers Ferry, WV, 25425, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 1

special-notice

Response DeadlineSep 15

Deadline has passed

Submission Closed

09/15/2026, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Mission Support Contracting Division

Contacts1 person available

OfficeWASHINGTON, DC, 20229, USA

Organization / AgencyDepartment Of Homeland Security → Mission Support Contracting Division

Office AddressWASHINGTON, DC, 20229, USA

Contacts

John Crockett

contact@example.gov

Full Description

The Department of Homeland Security, Customs and Border Protection intends to contract with Virtra, Inc for Virtra System Maintenance and Refresh.

Sole Source Justification: The statutory authority for use of 'other than full and open competition' for this transaction is 41 USC 253(c)(1) as implemented by RFO 6.103-1, only one responsible source and no other supplies or services will satisfy agency requirements.

The notice of intent is not a request for competitive proposals and no formal solicitation package is available. However, prospective contractors who believe they can successfully propose must provide specific detailed technical documentation to support such claims of abilities. No award will be made on the basis of any proposal or other information received in response to this notice, and this is a notification of intent to acquire supplies/services and not a request for proposals. The Government will not be responsible for any costs incurred in the preparation of responses to this announcement. This is the only notice that will be issued for these goods/services.