Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on August 14, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

W911S6-23-Q-0023 Sanitary Tubing and Valves

Closed
W911S6-23-Q-0023Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332919
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M3-27-T-0769
This solicitation, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of one quick coupling half, identified by NSN 4730-01-579-8245. The requirement specifies a delivery timeframe of 20 days after order, with an original required delivery date of May 31, 2024. The item is to be delivered FOB Origin to the Armament Inspectorate in Warszawa, Poland. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, specifically prohibiting the use of additive manufacturing unless authorized and restricting the intentional addition of mercury or mercury-containing compounds. Compliance requirements are extensive, including CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Inspection and acceptance are both set at the point of origin, with Certificate of Conformance procedures authorized under FAR 52.246-15. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Balance of Payments Program for quotes exceeding the micro-purchase threshold. The solicitation is open to full and open competition, with specific price evaluation preferences noted for HUBZone small business concerns.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
NAICS: 332919
New
Federal
PARTS KIT,BALL VALV
Solicitation # N0010426QNE98
This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of 175 ball valve parts kits (NSN 4820-01-425-4163). The material is designated as Special Emphasis Level I, meaning it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. Consequently, the contract mandates strict quality assurance, including a requirement for the contractor to maintain a quality system compliant with ISO-9001 or MIL-I-45208. The kits consist of a ball made from SAE-AMS-6931 and seats made from MD71-GG Mearthane, both requiring rigorous quantitative chemical and mechanical analysis. Key technical requirements include hydrostatic testing for each ball at 1875 PSI for 30 minutes, with dye penetrant inspection as an acceptable substitute for manufacturers lacking test fixtures. All welding and brazing must adhere to specific S9074 and 0900-LP standards, requiring prior approval of qualification data. The contractor must submit a Certificate of Compliance and all objective quality evidence via the Wide Area Workflow (WAWF) system to Portsmouth Naval Shipyard for review and acceptance before shipping. Final inspection follows a zero-defect acceptance policy, with sampling based on ANSI/ASQ-Z1.4. The government intends to make a single fixed-price award based on the most advantageous offer, prioritizing past performance over price. Packaging must comply with MIL-STD-2073-1, and all shipments must be prepaid to the destination. Offerors must provide a Quality Assurance Manual to be eligible for award and must certify that the materials are mercury-free. All configuration changes or deviations require formal review and approval by the Contracting Officer through Engineering Change Proposals or waiver requests.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in about 1 month
NAICS: 332919
New
Federal
STEM,FLUID VALVE
Solicitation # N0010426QZB64
Solicitation N00104-26-Q-ZB64 is a fixed-price request for quotations from NAVSUP Weapon Systems Support for the manufacture of a Fluid Valve Stem (NSN 4820-01-496-3210). This item is designated as a Critical Safety Item and Special Emphasis Material Level I, as its failure could result in catastrophic loss of life or the ship. The government will provide the necessary barstock (NIIN 014959538X2) as Government Furnished Material, and the contractor must maintain strict heat traceability throughout production. The stem must be manufactured in accordance with NAVSEA drawing 803-5959307 and related specifications, using ASTM-B348 Grade 23 or SAE-AMS-4931 material. Weld repairs on titanium parts are strictly prohibited. The contract mandates rigorous quality assurance and certification standards, requiring a quality system compliant with ISO-9001 and specific calibration standards such as ISO-10012 or ANSI-Z540.3. Key requirements include dye penetrant inspection, a zero-defect lot acceptance policy, and the submission of a comprehensive Certificate of Compliance and test results via the Wide Area Workflow system prior to shipment. All deliverables must be preserved and marked according to MIL-STD-2073 and MIL-STD-129. Award will be made to the most advantageous offeror, with past performance weighted as more important than price.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 14 days
NAICS: 332919
New
Federal
48--ACTUATOR,HYDRAULIC-, IN REPAIR/MODIFICATION OF
Solicitation # N0010427QZA04
This fixed-price contract, solicitation number N00104-27-Q-ZA04, is issued by the Navsup Weapon Systems Support Mech for the manufacture or refurbishment of hydraulic actuators. The scope of work requires the contractor to inspect, clean, and refurbish the items in accordance with Drawing 30093-40940 and MS NO. 5640-081-346 REV A CHG-4. Final delivery of the material must be completed within 86 days of the contract's effective date, with the ship-to destination located in Kittery, Maine. The award is designated as a DO rated order under the Defense Priorities and Allocations System, signifying its importance for national defense. Key requirements include physical identification per MIL-STD-130 and strict adherence to preservation, packaging, and marking standards such as MIL-STD-2073-1 and MIL-STD-129. If additive manufacturing is utilized, the contractor must provide comprehensive traceability data via DD1423 reporting. The contract includes a one-year warranty for supplies of a noncomplex nature and mandates the use of the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Evaluation for award is based on the Supplier Performance Risk System, assessing item, price, and supplier risk. All transportation to and from the repair site is paid for by the US Navy.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in about 1 month
NAICS: 332919
New
Federal
STEM, VALVE
Solicitation # N0010426QNE90
This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a Valve Stem (NSN 1HM 4820-01-548-5698) to be delivered within 120 days. The item is designated as Special Emphasis material (Level I, Scope of Certification) because it is used in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. Due to this criticality, the contract mandates strict quality controls, including a requirement for the contractor to maintain an ISO-9001 quality system and undergo Government Quality Assurance at source via the Defense Contract Management Agency. Technical requirements specify the use of ASTM-B150 Alloy C63200, mandatory oxygen cleaning per MIL-STD-1330, and a strict mercury-free composition. The award will be made to the offeror determined to be most advantageous to the Government, with past performance weighted as more important than price. Key deliverables include the hardware and comprehensive test certifications submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards, with specific red labeling for Level 1 materials. The procurement is DO certified for national defense under the Defense Priorities and Allocations System and is conducted as a simplified acquisition.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in about 1 month
NAICS: 332919
New
Federal
VALVE,REGULATING,FL
Solicitation # SPRMM127QKA27
This fixed-price solicitation, issued by DLA Mechanicsburg under solicitation number SPRMM127QKA27, requires the manufacture and delivery of two regulating valves (VALVE,REGULATING,FL) based on the design represented by Cage Code 99643, reference number 84140-1. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) criteria, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Offerors must be authorized distributors of the original manufacturer and are prohibited from providing refurbished material. Technical drawings are not available for this item, and the contractor is responsible for ensuring the product meets all quality requirements, including physical identification per MIL-STD-130 and packaging according to MIL-STD-2073-1. The contract mandates the use of PIEE-WAWF for the electronic submission of invoices and receiving reports, and any requests for modifications must be processed through the Workflow Pro (WFP) Mod Assist module. Inspection and acceptance will occur at the origin. Key compliance requirements include CMMC Level 1 self-certification, adherence to the Buy American Act, and strict prohibitions relating to Chinese military companies. Contractors must maintain inspection records for 365 days following final delivery and are required to provide the Original Equipment Manufacturer's CAGE code and part number when submitting quotes.
SPRMM1 DLA Mechanicsburg

POSTED

about 9 hours ago

DEADLINE

in about 1 month

General Info

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

Dugway, UT, 84022, USA

Set-Aside

SBA

Documents

1

Solicitation W9118G-23-Q-0023: Sanitary Tubing and Valves

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseClosed
Posted

Solicitation

Deadline changed

Response deadline changed from Aug 14, 2023 to Aug 17, 2023.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Dugway Prov Grd
Contacts1 person available
OfficeDUGWAY, UT, 84022-5000, USA
Office AddressDUGWAY, UT, 84022-5000, USA
Contacts
Kayla Turbyfill

Full Description

Show more
[ SEE OFFICIAL SOLICITATION AND DESCRIPTION OF SUPPLIES REQUIRED ATTACHED ] Mission & Installation Contracting Command Dugway Proving Ground (DPG) 5330 Valdez Circle MS#1 Dugway, Utah 84022 SOLICITATION NO: W911S6-23-Q-0023 This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6 of the FAR (Federal Acquisition Regulation) as supplemented with additional information included in this notice. This announcement constitutes the only solicitation requested and a written solicitation will not be issued. U.S. Army Dugway Proving Ground, Directorate of Contracting is contemplating the procurement of a Supply Contract for the following: Document Type: Combined Solicitation/Synopsis Solicitation Number: W911S6-23-Q-0023 Posted Date: Aug 01, 2023 Original Response Date: Aug 14, 2023 Current Response Date: Aug 14, 2023 Product or Service Code: 4730 Set Aside: Yes NAICS Code: 332919 Other Metal Valve and Pipe Fitting Manufacturing size standard 750 employees important - notice to offeror: an award will be made from this solicitation when the evaluation of offers has been completed which is anticipated to occur shortly after the closing date of the solicitation. in order to be considered for any award, it is required that contractors be registered, active and valid in the system for award management (sam) database at the time that award will be made. reference far 52.204-8 system for award management. it is recommended that if you are a contractor that will be responding to this solicitation and not currently registered, active and valid in the sam database, that you immediately begin the process. contractors must also meet the small business size standard of the naics code that this solicitation is issued under This is the only notice that contractors will receive instructing them to complete the SAM registration process if they have not already done so. The website is https://www.sam.gov/portal/SAM/#1. All solicitations shall be issued through the Government point of Entry (https://sam.gov/search?index=opp) It is the offeror responsibility to watch for any and all amendments to the solicitation, which shall be issued electronically through the SAM.gov Website. Request for Quote (RFQ) W911S6-23-Q-0023 is a combined synopsis/solicitation for commercial items. This combined synopsis/solicitation is issued as an RFQ. Submit written offers only, oral/facsimile offers will not be accepted. Written offers shall be submitted by Email to: contact@example.gov All firms or individuals responding must be registered and active in the System for Awards Database (www.sam.gov). This combined synopsis/solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-05 (March 7, 2022). It is the contractor's responsibility to be familiar with applicable clauses and provisions. Clauses and provisions can be found at: https://www.acquisition.gov/ REQUIREMENTS: Requirement: Purchase of Valves and Sanitary Tubing. We will not be accepting partial quotes - vendor must be able to provide the entire requirement to its specifications. Description of requirements available below. The Requiring Activity will consult potential quotes before an award may be made. The Requiring Activity for this procurement is the West Desert Test Center, CHEM (Chemistry) SPITFIRE 2.0/Lab 127, Dugway Proving Ground, Dugway Utah 84022. FOB-DESTINATION Subject: Sanitary Tubing and Valves Final Delivery Location (FOB Destination): W30M USA DUGWAY PROVING GROUND 4223 2ND STREET DUGWAY UT 84022-5000 Items to be Purchased: Quote on all items. Only quotes to the nearest cent will be accepted. Shipping: Shipping shall be included in the overall price column for each line item or as total in separate line item. Delivery By: 30 days after contract award Offeror is to fill in the area below for pricing on each item. Offeror may also submit a quote of their own format, providing they include the Solicitation #W911S623Q0023 on that document and address the Contract Specialist (Kayla Turbyfill at contact@example.gov) Offerors Company Information: Name of Company: UEI Number: Printed Name of Company Agent: Signature of Company Agent: Date: Phone Number: Email Address: Contract Terms and Conditions 1. CLAUSES INCORPORATED BY REFERENCE (FAR 52.252-2) (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(s): https://www.acquisition.gov Clauses Incorporated By Reference: 2. FAR 52.212-4 CONTRACT TERMS AND CONDITIONS-COMMERCIAL (OCT 2018) Addendum to FAR Clause 52.212-4, Contract Terms and Conditions-Commercial Items (Incorporated By Reference on Standard Form 1449): SYSTEM FOR AWARD MANAGEMENT (FAR 52.204-7) (OCT 2018) PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL (FAR 52.204-9) (JAN 2011) INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (FAR 52.204-19) (DEC 2014) Use of ByteDance or TikTok not permitted on Gov't IT equipment FAR 52.204-27 BRAND NAME OR EQUAL (FAR 52.211-6) (AUG 1999) UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (FAR 52.232-39) (JUN 2013) PROVIDING ACELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (FAR 52.232-40) (DEC 2013) APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (FAR 52.233-4) (OCT 2004) INSPECTION AND ACCEPTANCE (FAR 52.246-1) (APR 1984) DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (FAR 52.249-8) (APR 1984) SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING. (DFARS +1 (555) 000-0000) (OCT 2016) ELECTRONIC FUNDING VIA WAWF (DFARS 252.232-7006) (MAR 2018) Gov Control of work Product DFAR 252.204-7003 Whistleblower DFAR 252.203-7002 SAM Maintenance FAR 52.204-13 Cage Code Maintenance FAR 52.204-18 DFAR Compensation of Former Gov't Employees 252.203-7000 Protests FAR 52.223-3 Disputes FAR 52.233-4 Termination FAR 52.249-1 XUAR XinJiang Uyghur labor DFAR 252.225-7059 CLAUSES INCORPORATED BY FULL TEXT: 52.212-1 Instructions to Offerors-Commercial Items (Jun 2020) (a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the solicitation. However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees. (b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show The solicitation number; The time specified in the solicitation for receipt of offers; The name, address, and telephone number of the offeror; (4 ) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; Terms of any express warranty; Price and any discount terms; "Remit to" address, if different than mailing address; A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically); Acknowledgment of Solicitation Amendments; Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration. (c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during pre-award testing. (e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with subpart 4.10 of the Federal Acquisition Regulation), or alternative commercial items for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately. (f)Late submissions, modifications, revisions, and withdrawals of offers. (1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due. (2) (i)Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and- (A)If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or (B)There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or (C)If this solicitation is a request for proposals, it was the only proposal received. (ii)However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted. (3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel. (4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer. (g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror's initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received. (h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer. (i) Availability of requirements documents cited in the solicitation. (1) (i)The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to- GSA Federal Supply Service Specifications Section Suite 8100 470 East L'Enfant Plaza, SW Washington, DC 20407 Telephone +1 (555) 000-0000 Facsimile +1 (555) 000-0000. (ii)If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee. (2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites: (i)ASSIST (https://assist.dla.mil/online/start/). (ii)Quick Search (http://quicksearch.dla.mil/). (iii)ASSISTdocs.com (http://assistdocs.com). (3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by- (i)Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm); (ii)Phoning the DoDSSP Customer Service Desk +1 (555) 000-0000, Mon-Fri, 0730 to 1600 EST; or (iii)Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone +1 (555) 000-0000/2179, Facsimile +1 (555) 000-0000. (4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance. (j) Unique entity identifier. (Applies to all offers that exceed the micro-purchase threshold, and offers at or below the micro-purchase threshold if the solicitation requires the Contractor to be registered in the System for Award Management (SAM).) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the unique entity identifier that identifies the Offeror's name and address. The Offeror also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the Offeror to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Offeror should indicate that it is an offeror for a Government contract when contacting the entity designated at www.sam.gov for establishing the unique entity identifier. (k)[Reserved] (l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable: The agency's evaluation of the significant weak or deficient factors in the debriefed offeror's offer. The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror. The overall ranking of all offerors, when any ranking was developed by the agency during source selection. A summary of the rationale for award; For acquisitions of commercial items, the make and model of the item to be delivered by the successful offeror. Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency. (End of provision) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Aug 2019) (Section 889(a) (1) (A) of Pub. L. 115-232). (a) Definitions. As used in this clause Backhaul means intermediate links between the core network, or backbone network, and the small subnetworks at the edge of the network (e.g., connecting cell phones/towers to the core telephone network). Backhaul can be wireless (e.g., microwave) or wired (e.g., fiber optic, coaxial cable, Ethernet). Covered foreign country means The People's Republic of China. Covered telecommunications equipment or services means (1) Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities); (2) For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities); (3) Telecommunications or video surveillance services provided by such entities or using such equipment; or (4) Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country. Critical technology means (1) Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations; (2) Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled- (i) Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, nuclear nonproliferation, or missile technology; or (ii) For reasons relating to regional stability or surreptitious listening; (3) Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities); (4) Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of nuclear equipment and material); (5) Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title 42 of such Code; or (6) Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. 4817). Interconnection arrangements means arrangements governing the physical connection of two or more networks to allow the use of another's network to hand off traffic where it is ultimately delivered (e.g., connection of a customer of telephone provider A to a customer of telephone company B) or sharing data and other information resources. Reasonable inquiry means an inquiry designed to uncover any information in the entity's possession about the identity of the producer or provider of covered telecommunications equipment or services used by the entity that excludes the need to include an internal or third-party audit. Roaming means cellular communications services (e.g., voice, video, data) received from a visited network when unable to connect to the facilities of the home network either because signal coverage is too weak or because traffic is too high. Substantial or essential component means any component necessary for the proper function or performance of a piece of equipment, system, or service. (b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. The Contractor is prohibited from providing to the Government any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104. (2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract, or extending or renewing a contract, with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. (c) Exceptions. This clause does not prohibit contractors from providing (1) A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (2) Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such equipment transmits or otherwise handles. (d) Reporting requirement. (1) In the event the Contractor identifies covered telecommunications equipment or services used as a substantial or essential component of any system, or as critical technology as part of any system, during contract performance, or the Contractor is notified of such by a subcontractor at any tier or by any other source, the Contractor shall report the information in paragraph (d)(2) of this clause to the Contracting Officer, unless elsewhere in this contract are established procedures for reporting the information; in the case of the Department of Defense, the Contractor shall report to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil. (2) The Contractor shall report the following information pursuant to paragraph (d)(1) of this clause (i) Within one business day from the date of such identification or notification: the contract number; the order number(s), if applicable; supplier name; supplier unique entity identifier (if known); supplier Commercial and Government Entity (CAGE) code (if known); brand; model number (original equipment manufacturer number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended. (ii) Within 10 business days of submitting the information in paragraph (d)(2)(i) of this clause: any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of covered telecommunications equipment or services, and any additional efforts that will be incorporated to prevent future use or submission of covered telecommunications equipment or services. (e) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (e) and excluding paragraph (b)(2), in all subcontracts and other contractual instruments, including subcontracts for the acquisition of commercial items. (End of clause) 52.204-26 Covered Telecommunications Equipment or Services-Representation. As prescribed in 4.2105(c), insert the following provision: Covered Telecommunications Equipment or Services-Representation (Dec 2019) (a) Definitions. As used in this provision, - covered telecommunications equipment or services has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for - covered telecommunications equipment or services. (c) Representation. The Offeror represents that it ? does, ? does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument. I certify that the statements herein are true to the best of my knowledge. _________________________________ ___________________________________ Printed Name and Title Signature Date 3. (FAR 52.212-5)(JAN 2020)CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS-COMMERCIAL ITEMS. (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91). (3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Aug 2019) (Section 889(a) (1) (A) of Pub. L. 115-232). (4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). (5) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553). (6) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15 U.S.C.644). 52.219-28, Post Award Small Business Program Re-representation (Jul 2013) (15 U.S.C. 632(a) (2)). 52.222-3, Convict Labor (June 2003) (E.O.11755). 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2020) (E.O.13126). 52.222-21, Prohibition of Segregated Facilities (Apr 2015). 52.222-26, Equal Opportunity (Sept 2016) (E.O.11246). 52.204-27, Prohibition on a BYTEDANCE Covered Application (June 2023) 52.222-50, Combating Trafficking in Persons (Jan 2019) (22 U.S.C. chapter 78 and E.O. 13627). 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011). 52.225-1, Buy American-Supplies (May 2014) (41 U.S.C. chapter 83). 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct 2018) (31 U.S.C. 3332). 52.212-2 EVALUATION--COMMERCIAL ITEMS: (a) The Government intends to award a contract resulting from this solicitation, without discussion, to the responsible offeror whose offer conforms to the solicitation. The following factors shall be used to evaluate offers: Lowest Price and technically acceptable for all listed items above. 4. SUBMISSION OF QUOTE Quotes, including schedule of Items, including Offerors Information must be emailed to contact@example.gov, Mail & Facsimile Quotes will NOT be accepted. Quotes are required to be received no later than 10:00 AM MST AUG 14, 2023. We will not be accepting partial quotes - vendor must be able to provide the entire requirement to its specifications. Description of requirements listed in full text above. The Requiring Activity will consult potential quotes before an award may be made. Please contact Kayla Turbyfill with any questions about this solicitation at contact@example.gov. 5. Prohibition on Contracting with Entities Engaging in Certain activities or Transactions Relating to IRAN-Representations and Certifications. (FAR 52.225-25)(AUG 2018) 6. OFFEROR REPRESENTATIONS AND CERTIFICATIONS-COMMERCIAL ITEMS. (FAR 52.212-3) (OCT 2018) The clause at FAR 52.212-3 Offeror Representations and Certifications - Commercial Items, applies to this acquisition. Offeror shall complete only paragraphs (b) (Exhibit #1) of this provision; if the offeror has completed the annual representations and certificates electronically via https://www.sam.gov . Exhibit 1 - FAR 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law Offeror shall complete paragraphs (b) of this provision and return with quote. Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Feb 2016) (a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid i...

More opportunities from Department Of Defense → W6QM Micc-Dugway Prov Grd

Same awarding agency

NAICS: 237310
Federal
Dugway Proving Ground (DPG) Horizontal Facility Construction Road Maintenance
Solicitation # W911S6-27-B-A001
Solicitation W911S6-27-B-A001 is an Indefinite-Delivery, Indefinite-Quantity (IDIQ), Firm-Fixed Price contract for miscellaneous paving construction services at the U.S. Army Dugway Proving Ground in Utah. The scope includes the construction and repair of asphalt, cement concrete, gravel, and earth surfaced areas, as well as associated infrastructure and utility distribution system repairs. The contract features a twelve-month base period with four one-year option periods, with an estimated annual magnitude of up to 5 million dollars and a total maximum contract value of 30 million dollars. A minimum guarantee of 50,000 dollars applies to the base and each option period. This acquisition is restricted to 8(a) firms authorized by the Small Business Administration's Utah District Office, falling under NAICS code 237310 with a size standard of 45 million dollars. Award will be granted to the lowest responsive and responsible bidder. Bidders must submit a signed SF 1442, a bondability letter validating the ability to cover the total contract value, and pricing annotated on the appropriate CLINs by November 18, 2026. The contractor is required to adhere to strict quality control standards, including the submission of QC reports within two working days of testing, and must comply with the Davis-Bacon Act, Buy American requirements, and DFARS cybersecurity regulations. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.
Highway, Street, and Bridge Construction

POSTED

7 days ago

DEADLINE

in 20 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS