Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on April 22, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

W912HZ-COVID-19 Clean and disinfect office and communal areas

Awarded
W912HZ-COVID-19Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910
New
Theatre Mold Remediation Scope of Work
Solicitation # AT25-0006
Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project, necessitated by a sprinkler system failure, requires the remediation of mold throughout the entire building and the cleaning or replacement of damaged theater seating cushions. All work must be performed in accordance with ANSI/IICRC S520 standards, EPA guidelines, and OSHA regulations, with Indiana state laws prevailing if they are more stringent. Key deliverables include the provision of a Certified Industrial Hygienist, a detailed mold remediation plan featuring HEPA filtration and negative air pressure, and a one-year workmanship guarantee. The contract is awarded on a best-value basis, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Bidders must submit a single lump sum proposal with a detailed cost breakdown, a timeline for substantial completion, and proof of a valid Indiana Contractor's License. Mandatory requirements include attendance at the site pre-bid walk-through and the provision of specific insurance coverages, including automobile liability and workers compensation. Performance must begin within 14 days of the Notice to Proceed, and the contractor must adhere to Davis Bacon Act wage determinations. Payment terms are Net 30.
Atterbury Job Corps Center

POSTED

about 6 hours ago

DEADLINE

in 10 days

AI Contract Overview

Show more

The United States Army Corps of Engineers, Engineer Research and Development Center, is seeking sources for immediate and rapid response disinfecting and remediation services to address COVID-19. The requirement involves cleaning and disinfecting office and communal areas, including HVAC systems, in locations across Mississippi, New Hampshire, North Carolina, Texas, Alabama, and Illinois. Services must comply with CDC guidelines and utilize EPA-approved disinfectants and foggers to perform high-touch cleanup and enhanced cleaning for areas occupied by suspected or confirmed COVID-19 cases. The anticipated procurement will be a firm-fixed-price Blanket Purchase Agreement with a potential term of two years, though there is no minimum guarantee of work. Task orders will be issued on a non-recurring basis as incidents occur. This opportunity falls under NAICS code 562910 for Remediation Services. Interested vendors are required to submit a detailed capability statement demonstrating their technical skills, past performance, and business size status to the designated point of contact.

General Info

Contract Value

$0

NAICS

562910 - Remediation Services

Place of Performance

Vicksburg, MS, USA

Set-Aside

NONE

Award Issued Date

Documents

1

Justification+COVID-19+cleaning+disinfecting_redacted_posted.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

3 updates
PhaseAwarded
Posted

Sources Sought

Notice updated

The notice title changed. The notice description changed.

Notice updated

Notice type changed from Sources Sought to Special Notice. Response deadline changed from Mar 31, 2020 to Apr 3, 2020. Set-aside removed. The notice description changed.

Justification (J&A)

Justification & Approval published

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W2R2 USA Engr R & D Ctr
Contacts2 people available
OfficeVICKSBURG, MS, 39180-6199, USA
Office AddressVICKSBURG, MS, 39180-6199, USA

Full Description

Show more
The service locations are corrected: Champaign, IL Hanover, NH Vicksburg, MS Duck, NC Lewisville, TX Mobile, AL ***************************** THIS SOURCES SOUGHT IS BEING ISSUED FOR DISINFECTING/REMEDIATION SERVICES IN RESPONSE TO COVID-19. This is not a solicitation. The United States Army Corps of Engineers, Engineer Research and Development Center, is conducting this sources sought notice to identify potential sources that can provide immediate and rapid response services to clean and disinfect office and communal areas that have known to occupy individuals suspected or confirmed to have COVID-19. Any resulting procurement instrument will be for non-recurring work. It is anticipated that a Blanket Purchase Agreement will be executed. The contract type is anticipated to be firm fixed price. The proposed contract is anticipated to include tasking that would be accomplished by labor categories that are subject to the Service Contract Act. The contract term may be two years. There is no minimum guarantee of work. Anticipated performance start date is April of FY20. The proposed requirement will be to provide one-time disinfection services (per task order) to space identified to have been occupied by a person who is suspected or has tested positive for COVID-19. Task orders will be issued, and funding obligated, once an incident occurs. The services must comply with guidelines issued by the Centers for Disease Control and Prevention (CDC). Vendors must be able to provide services at the following anticipated performance locations: Vicksburg, MS Hanover, IL Lebanon, NH Duck, NC Lewisville, TX Mobile, AL The Contractor shall utilize an EPA approved disinfectant to clean and wipe all non-porous surfaces in one direction to ensure viruses associated with COVID-19 are destroyed. Non-porous surface areas include but are not limited to: doors, doorknobs, light switches, countertops, refrigerator doors, microwave doors, keyboards, desks, copy machines, tables, cabinets, hard-surface floors, and restroom surfaces. The Contractor shall utilizing an EPA approved fogger type disinfectant to disinfect all areas within the facility to include but not limited to cubicles, offices, closets, hallways, elevators, mechanical rooms, entry ways, stairwells, and open spaces. The Contractor shall utilizing an EPA approved fogger type disinfectant to disinfect the building's heating ventilation, and air conditioning (HVAC) system. The HVAC systems includes but not limited to all air handling units and or packed air systems. Cleaning under this BPA can be accomplished by the following: Fogging: A CDC approved Antibacterial and Antiviral Fog shall be sprayed to disinfect the area. High Touch Cleanup: Cleanup of high touch surfaces is required for a situation involving a person who is suspected to have COVID-19 or a Person Under Investigation (PUI); which is someone who is involved in a quarantine situation or has come in contact with someone who has been in a quarantine situation, or has come in contact with someone testing positive. This includes cleaning and disinfecting of high touch nonporous surfaces and cleaning and sanitizing of high touch porous surfaces. Enhanced Cleanup: Enhanced cleanup is required for an area in which a person who has been confirmed positive for COVID-19 has inhabited. This includes cleaning and disinfecting of all nonporous surfaces and cleaning and sanitizing of all porous surfaces. This enhanced cleaning includes walls up to 8 feet but excludes ceilings. The applicable NAICS code for this requirement is 562910 Remediation Services with a Small Business Size Standard of $22mil. The Government invites contractors with the capabilities necessary to meet or exceed the stated requirements to submit a Capability Statement consisting of appropriate documentation, literature, brochures, and references. Interested parties should register on-line and subscribe to receiving procurement announcements related to this sources sought notice at www.beta.sam.gov. Any questions related to this notice shall be submitted in writing to the point of contact listed below. NO REIMBURSEMENT WILL BE MADE FOR ANY COSTS ASSOCIATED WITH PROVIDING INFORMATION IN RESPONSE TO THIS ANNOUNCEMENT OR ANY FOLLOW-UP INFORMATION REQUESTS. This documentation must address at a minimum the following items: 1.) What type of work has your company performed in the past in support of the same or similar requirement? 2.) Can or has your company managed a task of this nature? If so, please provide details. 3.) Can or has your company managed a team of subcontractors before? If so, provide details. 4.) What specific technical skills does your company possess which ensure capability to perform the tasks? 5.) Company name, address, DUNS number, CAGE code, point of contact, telephone number and email address. 6.) Respondents to this notice also must indicate whether they qualify as a Small, Small Disadvantaged, Women-Owned, HUBZone, or Service Disabled Veteran-Owned Small Business. 7.) Company URL address. The Government respectfully requests information on or before 2:00 PM CST, March 31, 2020. Please provide capability statements to Davita S. Baloue email at contact@example.gov .

More opportunities from Department Of Defense → W2R2 USA Engr R & D Ctr

Same awarding agency

NAICS: 811310
New
Federal
CRREL Generator Maintenance Services
Solicitation # W913E527RA001
The US Army Cold Regions Research and Engineering Laboratories (CRREL) is soliciting firm fixed price generator maintenance services for its facility located at 72 Lyme Road in Hanover, New Hampshire. The contractor is responsible for providing all labor, supervision, tools, and materials necessary for the inspection, testing, and repair of standby diesel generators, automatic transfer switches, and fuel day tanks. Scope of work includes annual minor and major preventive maintenance, with major services specifically scheduled for October each year, as well as three-year maintenance and corrective repairs. All work must comply with manufacturer recommendations and State of New Hampshire licensing and qualification requirements. Additionally, the contractor must ensure all hazardous materials are labeled according to Federal regulation 29 CFR1910.1200. This is a total small business set-aside solicitation with a 10 percent price evaluation preference for HUBZone small business concerns. Award will be based on a best value tradeoff, where technical capability and past performance are weighted as significantly more important than price. Technical evaluation focuses on the operations plan, key personnel, and the implementation of an Inspection, Testing, and Maintenance Plan. Proposals must be submitted in three volumes covering technical capability, past performance, and pricing, with strict page limits and formatting requirements. The estimated delivery date for the requirements is November 30, 2026.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238120
Federal
Request for Information for On-Site Fabrication and Assembly of a Three-Bay High-Performance Magazine (HPM) Structure
Solicitation # W912HZ27X1CTB
The U.S. Army Corps of Engineers Engineer Research and Development Center is conducting market research via a Request for Information to identify US-based contractors capable of the on-site fabrication and final assembly of a three-bay, monolithic reinforced concrete High-Performance Magazine structure. Located at Range 19, Fort Polk, Louisiana, this experimental test structure will be cast-in-place and is intended for eventual destruction. The scope of work includes the procurement and installation of Grade 60 reinforcing steel, 10,000 PSI self-consolidating concrete, structural sand fill with a density of 100 PCF, and the construction of three reinforced concrete doors and a protective sand/earth berm. The project requires a contractor with expertise in high-strength self-consolidating concrete, robust engineered formwork systems, and the installation of continuous, non-spliced rebar. All site activities must be completed within 240 days of contract award, with a mandatory 14-day mobilization notice provided to the Technical Point of Contact. The government requires strict adherence to ASTM standards for concrete compressive strength, slump flow, and ready-mix requirements, with precise dimensional tolerances of +/- 0.5 inches for overall dimensions and +/- 0.375 inches for wall and slab thicknesses. Interested vendors must submit their capabilities statements and responses to specific technical questions by November 4, 2026.
Structural Steel and Precast Concrete Contractors

POSTED

8 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS