WASHER, FLAT

The contract specifies the procurement of one unit of a flat nonmetallic washer with NSN 5310-00-037-4935, meeting precise dimensional tolerances: minimum outside diameter of 1.718 inches, inside diameter of 1.115 inches, thickness of 0.025 inches; maximum values of 1.734 inches, 1.135 inches, and 0.035 inches respectively. The item is designated as a critical application requiring review against SM 3200.1 Enclosure 3, and must conform to the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951. Packaging must adhere to ASTM D3951 unless overridden by DLA requirements and must be palletized per RP001, with all containers labeled and marked in strict accordance with MIL-STD-129, including barcoding and physical identification of the bare item as required by RQ017. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-based acceptance criteria, where critical attributes are verified at Level VII with an AQL of 0.1, major attributes at Level IV with AQL 1.0, and minor at Level II with AQL 4.0. The delivery is FOB origin with a strict 10-day delivery schedule targeting July 16, 2026, and the single unit must be delivered to the designated freight address at Camp Lejeune, North Carolina, with no tolerance for variance in quantity. Inspection and acceptance occur at destination, and compliance with all environmental and safety clauses is mandatory, including prohibitions on hexavalent chromium, hazardous substances, and trafficking in persons, alongside compliance with employment eligibility verification and sustainable product requirements. The supplier must possess a valid Unique Entity ID and CAGE code, and represent their small business status appropriately if applicable, while all payment and reporting must be conducted through WAWF. Multiple qualified suppliers are listed, including Ontic Engineering & Manufacturing Inc, Parker-Hannifin Corporation, and others, each with approved part numbers for the item. All contractual obligations are governed by a range of FAR and DFARS clauses covering equal opportunity, safeguarding information systems, subcontracting, accelerated payments to small business subcontractors, and prohibitions on procurement from certain foreign entities.