Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WASHER, FLAT

Active
SPE7M2-26-T-5956Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of flat washers identified by NSN 5310005825677 and part number NASM15795-810, with a total quantity of 1,272 hardware units delivered across three separate delivery lines. The item is classified as a commercial item and subject to full and open competition, with all supplies requiring strict compliance with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Packaging and preservation must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special marking required. Mercury or mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, except for specific regulated exceptions such as certain batteries or instruments. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans with zero non-conformances required unless otherwise stated, and attributes are validated at predefined levels. Deliveries are FOB origin with zero quantity variance allowed, inspection and acceptance occurring at destination. Delivery dates vary per line but are tied to a 119-day lead time, with destinations including Robins Air Force Base in Georgia, Red River in Texas, and San Joaquin in California. The contract mandates configuration change management through engineering change proposals and deviations, and all materials must conform to the referenced non-government standard NASM15795 Rev 3 dated April 30, 2019, and other applicable military specifications.

General Info

Procurement of 1,272 NASM15795-810 washers, FOB origin, strict MIL-STD compliance, no mercury, zero variance, three delivery points.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-T-5956 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,FLAT
WASHER, FLAT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
.
FULL AND OPEN COMPETITION APPLY
.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
CRITICAL APPLICATION ITEM
SPE7M2-26-T-5956
SECTION B
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NASM15795 REVISION NR 3 DTD 04/30/2019 PART PIECE NUMBER: NASM15795-810
TDP Rev A Gen 1 IAW REFERENCE UNK FF-W-92C(3) REVISION NR C DTD 05/19/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017601778 0001 HD 201.000
NSN/MATERIAL:5310005825677
DELIVERY (IN DAYS):0119
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
SPE7M2-26-T-5956
SECTION B
PR: 7017601778 PRLI: 0001 CONT’D
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:11/17/2027 Original Required Delivery Date:04/09/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017601778 0002 HD 423.000
NSN/MATERIAL:5310005825677
DELIVERY (IN DAYS):0119
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPE7M2-26-T-5956
SECTION B
PR: 7017601778 PRLI: 0002 CONT’D
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
Need Ship Date:07/23/2026 Original Required Delivery Date:04/09/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017601778 0003 HD 648.000
NSN/MATERIAL:5310005825677
DELIVERY (IN DAYS):0119
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7M2-26-T-5956
SECTION B
PR: 7017601778 PRLI: 0003 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
SPE7M2-26-T-5956
SECTION B
PR: 7017601778 PRLI: 0003 CONT’D
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:05/14/2027 Original Required Delivery Date:04/09/2027
SPE7M2-26-T-5956 NSN/Part Number: 5310-00-582-5677 Quantity: 201 HD Purchase Request: 7017601778QTY: 1272 Delivery: 119 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-U-3296
This contract specifies the procurement of a screw with close tolerance, identified by NSN 5305-01-321-6120 and part number NAS1973T26T, manufactured to meet the non-government standard NAS1972 through NAS1980 Revision 7 and NAS4004 Revision 16. The item is classified as a commercial item and a critical application component requiring source inspection, with all threads of class 3A and 3B subject to dimensional verification per System 22 of FED-STD-H28/20, excluding very small internal and external threads. Manufacturing must adhere to the current revision of the applicable standard, and prior revisions are acceptable only for historically produced items. The manufacturing process requires forging, necessitating specialized tooling, and the supplier must comply with SAE AS9100 quality requirements, regardless of whether they are a manufacturer or non-manufacturer. All items must be marked per MIL-STD-130N paragraph 4.1.b(2) in addition to manufacturer logos and material identifiers, and packaged in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise specified, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The contract is a total small business set-aside under NAICS 332722, with delivery due in 108 days FOB origin, no variance permitted in quantity, and inspection and acceptance occurring at the origin. The unit of issue is each, with a quantity of 65 units, and packaging must adhere to DLA’s packaging requirements including palletization standards. The solicitation is managed by the Defense Logistics Agency and is open to responses through the DIBBS system.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
BOLT, HOOK
Solicitation # SPE4A1-26-T-2504
The contract pertains to the procurement of 25 BOLT, HOOK items with NSN 5306-01-503-9383 under solicitation SPE4A1-26-T-2504, requiring delivery within 20 days to FPO AP 96672 aboard USS MAKIN ISLAND LHD 8. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. Packaging must follow DLA’s packaging requirements and be palletized according to RP001, with no tolerance for quantity variance—exactly 25 units must be delivered. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 with a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The unit of issue is EA, with a unit price of $25.00 and a total contract value of $625.00. Items must be shipped via traceable transportation methods, avoiding parcel post, in accordance with DLAD PROC NOTES C19 and C20, and must bear proper identification per RQ017. The supplier, MCMASTER-CARR SUPPLY CO, must meet all government-unique requirements including the use of specified packaging data QUP:025 and reference to the correct DLA unit of issue standards. The required delivery date is July 27, 2026, and the contract is managed under the Department of Defense’s Aviation Supply Chain with primary point of contact Jade Stringfield.
AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, HEXA
Solicitation # SPE4A6-26-T-11GS
A hexagonal plain slotted nut, identified by NSN 5310-00-849-6883, is being procured in a quantity of 14 units under a fully competitive solicitation governed by military and federal specifications. The procurement is managed by the ASC Commodities Division under the Department of Defense, with performance taking place at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation, numbered SPE4A6-26-T-11GS, was posted on August 2, 2026, with responses due by August 10, 2026, and falls under NAICS code 332722 for screw, nut, bolt, and fastener manufacturing. The delivery timeline is set at 89 days after award, and the primary point of contact for inquiries is Vincent Price, reachable via phone or email provided through the Defense Logistics Agency’s DIBBS system.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIVET
Solicitation # SPE4A0-26-T-4129
The contract specifies the procurement of 10 plain blind rivet nuts with the NSN 5310-00-934-0222, supplied in cadmium-plated steel, to be delivered within five days of award. All items must comply with stringent quality and identification standards, including MIL-STD-130N for military property marking and adherence to DLA packaging requirements. The contract mandates compliance with specific Contract Data Requirements Lists such as DD Form 1423s and CDRLs related to quality certification, removal of government identification from non-accepted supplies, and physical identification of bare items. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Quality conformance inspections are required, and the manufacturer may elect attribute or variable inspection methods under MIL-STD-1916. All technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance. The solicitation number is SPE4A0-26-T-4129, posted August 2, 2026, with a response deadline of August 10, 2026, and the point of contact is Danita Davis of the Department of Defense’s Aviation Supply Chain ESoC Buys.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
GASKET AND PREFORME
Solicitation # SPE7L3-26-T-144U
The contract involves the procurement of a gasket and preformed packing assortment identified by NSN 5330015604081 and part number 285000840051880, with a total quantity of 57 thousand units to be delivered under solicitation SPE7L3-26-T-144U. Delivery is required within 46 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with MIL-STD-2073-1E specifications, including use of preservative method 33, dry packaging, and buffering materials, while marking adheres to MIL-STD-129 with no special marking required. The packaging and palletization must follow DLA’s procurement requirements, and hazardous materials handling is governed by IP025. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, with a needed ship date of August 5, 2025, though the original required delivery date was May 15, 2025. The item is strictly prohibited from containing asbestos as defined by FED-STD-313, and government identification markings in non-accepted supplies must be removed per RQ011. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. The unit of issue is KT, with no variance allowed in quantity, and all data aligns with DoD standards for procurement and logistics.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-905C
This contract pertains to the supply of 20 gaskets identified by NSN 5330-01-596-7865, with a delivery requirement of five days after award. The solicitation number is SPE7L1-26-T-905C, issued on August 2, 2026, with responses due by August 13, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. Packaging must comply with DLA standards, and all supplies must be free of government identification upon rejection. The contract prohibits the intentional use of mercury or mercury-containing compounds in or on the hardware, except for functional applications in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. Asbestos, as defined in FED-STD-313, is strictly forbidden. Covered defense information provisions may apply, and the place of performance is specified as Chambersburg, Pennsylvania, with Kristina Derry of the Department of Defense’s Land Supply Chain as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE7L1-26-T-903M
The contract pertains to the procurement of two CLIP, SPRING TENSION units with NSN 5340-01-596-7792 and part number 4982953 from CUMMINS INC, under solicitation SPE7L1-26-T-903M. Delivery is required within five days of award, with shipment originating from the supplier and delivered FOB origin to the Letterkenny Army Depot in Chambersburg, Pennsylvania. The quantity is strictly fixed at two units with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master technical and quality requirements, prioritizing federal standards over ASTM D3951 if the item is non-hazardous, or with TQ requirement IP025 if hazardous per FED-STD-313. All packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA’s packaging guidelines. Shipping must occur via the fastest traceable method, explicitly excluding parcel post. The unit of issue is each, with a unit price of $0.000 and a total price of $2.000. The required delivery date is July 30, 2026, and the point of contact for inquiries is Kristina Derry of the Department of Defense.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7M1-26-T-244V
The contract pertains to the procurement of COVER, ACCESS under solicitation SPE7M1-26-T-244V, with a requirement for two units to be delivered within 77 days of award to Tracy, California, 95304-5000. The item is identified by NSN 5340-01-516-4047 and is part of purchase request 7012381335. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment later updates it. Strict prohibitions against intentional addition of mercury or mercury-containing compounds apply to all supplied hardware or materials, except for specific functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable items containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. Identification marking must comply with MIL-STD-130N dated November 16, 2012. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Haley Clark as the primary point of contact, and responses are due by August 13, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIV
Solicitation # SPE4A6-26-T-11GF
The contract entails the procurement of 300 units of NUT, PLAIN, BLIND RIV with NSN 5310-01-666-2654 under solicitation SPE4A6-26-T-11GF, with delivery required within 207 days FOB origin. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise contracted, with attributes classified per critical, major, or minor levels corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified chemical reagents; portable devices with mercury must include shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. The product shall be manufactured to TDP Rev C Gen 3 per NAS1738 Rev 6 dated 11/30/2024, and the unit of issue is each (EA) with no variance allowed in quantity. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. The contract enforces zero tolerance for non-conforming items, requires full compliance with government identification removal protocols for rejected supplies, and mandates bare item marking per RQ017. The point of contact is Molitauoleava Langi, and the solicitation closed on August 10, 2026, with an original need date of March 6, 2027.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-11GW
The contract specifies the procurement of one shoulder screw, part number SR-16 with NSN 5305-01-549-2013, under solicitation SPE4A6-26-T-11GW, with a required delivery within 20 days from the contract date. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-130N for physical identification marking and MIL-STD-129 for labeling. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with designated verification levels or AQLs. The screw must be free of intentional mercury or mercury compounds throughout its manufacturing, packaging, and preservation, except for narrowly defined functional exceptions such as batteries or sensors, and even then must meet NAVSEA containment standards. Packaging must conform to MIL-STD-2073-1E with preservation methods specified, palletization as per DLA requirements, and prohibition of mercury in any preservation or packing materials. Delivery is FOB origin to the USS HYMAN G RICKOVER (SSN 795) in Groton, CT, with shipper required to use the fastest traceable means, explicitly excluding parcel post. The contract requires CMMC Level 2 self-assessment compliance, and all markings, packaging, and documentation must precisely follow government-prescribed formats, with no variance allowed in quantity.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
CLIP, RETAINING
Solicitation # SPE7L3-26-U-0666
The contract pertains to the procurement of CLIP, RETAINING with NSN 5340-00-675-2101 and part number 55008, under solicitation SPE7L3-26-U-0666, for a quantity of 161 units at a unit price of $161.00, totaling $25,921.00. Delivery is required within 116 days FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, including adherence to MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Hazardous materials must be packaged per FED-STD-313 and TQ requirement IP025; non-hazardous items must be commercially packaged. Palletization must follow DLA’s procurement packaging requirements, and government identification must be removed from non-accepted supplies. The unit of issue is each (EA), and the contract specifies DLA Direct, CONUS coverage. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026, under NAICS code 332722, managed by the Department of Defense’s Land Supplier Operations Vehicle Support. The primary point of contact is Stephen Weaver, reachable via email and phone. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List accessible through the designated website, with revision control determined by the solicitation or award date depending on acquisition size. Delivery is not guaranteed as the quantity is estimated and may not be fully purchased by the IDC. All packaging, labeling, and unit of issue must strictly align with contract specifications and DLA directives.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
SPRING
Solicitation # SPE7L1-26-T-906G
The contract pertains to the procurement of a single unit of a part identified by NSN 5360-01-244-5786 under solicitation SPE7L1-26-T-906G, with a required delivery within five days of award. The requirement is governed by the DLA Packaging Requirements for Procurement and incorporates technical and quality standards referenced via R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item must comply with the mandatory removal of government identification from non-accepted supplies. The procurement is managed by the Department of Defense’s Land Supply Chain, with performance delivery scheduled for Cherry Point, North Carolina, 28533-8051. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with Kristina Derry listed as the primary point of contact, reachable via email and phone. The NAICS code 332722 identifies the industry classification, and no set-aside type has been designated for this acquisition.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M2-26-T-5959
This contract is for the procurement of 37 electromechanical relays with NSN 5945-01-473-5426 and part numbers 6957ED104-A1ATN and 6967ED530PC3 from DRS Naval Power Systems Inc, under solicitation SPE7M2-26-T-5959. The delivery is required within 206 days of award, with delivery terms FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. The contract strictly enforces compliance with technical and quality requirements referenced in the DLA Master List, and mandates adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including special marking code ZZ for unique requirements. All items must be packaged and palletized according to DLA packaging standards, with unit packaging marked in accordance with IPC/JEDEC J-STD-609 to identify lead or lead-free finishes. The use of mercury or mercury-containing compounds is prohibited except for specific exemptions like batteries, fluorescent lamps, sensors, and weapon systems, and when present, portable devices must have shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. The item is designated as a critical application item, the quantity variance is strictly zero percent, and the contract requires compliance with all cited technical data even if incomplete. The ship date is March 8, 2027, with the original required delivery date set for April 2, 2027.
Relay and Industrial Control Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M2-26-T-5943
The contract is for the procurement of fluid filter elements identified by part numbers 9318-41 and 9318-80, supplied by King Engineering Corporation under NSN 4330-00-412-3892, with a total quantity of 26 units. The items are classified as critical application components requiring full and open competition, and all specifications strictly prohibit the intentional addition of mercury or mercury-containing compounds in direct contact with the hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable devices containing mercury must be shock-proof and include a secondary containment system compliant with NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with packaging code U, no special marking, and palletization following DLA's RP001 requirements. All supplies are to be delivered FOB origin, with a delivery window of 165 days, and a required ship date of January 26, 2027, under contract SPE7M2-26-T-5943. Inspection and acceptance occur at destination, and delivery must be sent to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002. The contract incorporates technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Unit price is $26.00 per item, resulting in a total contract value of $676.00, and the solicitation closed on August 13, 2026, with a posting date of August 2, 2026, under NAICS code 333998.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M2-26-T-5958
This contract defines the procurement of a electrical plug connector identified by NSN 5935-01-737-8975 and part number OSTW-CC-J-M, with a quantity of 61 units to be delivered within 95 days of contract award. The item must conform to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements for Procurement. All items must be marked in accordance with MIL-STD-129 with no special marking codes applied, and palletization must follow DLA standards. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds except for specified functional uses such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents approved by NAVSEA, and portable devices containing mercury must include a second containment boundary. The unit price is $61.00 per unit, with a total contract value of $3,721.00, and the solicitation was issued under contract number SPE7M2-26-T-5958 with a required delivery date of March 27, 2027. The procurement is governed by DoD unit of issue standards and all shipments must adhere to DLA transportation guidelines.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE7M2-26-T-5951
The contract specifies the procurement of 646 hundred-unit lots of flat washers identified by NSN 5310-01-390-5131 and part number NAS1149F0432P, classified as a commercial item. Delivery is required within 86 days of order placement to the receiving warehouse in Tracy, California, under FOB Origin terms with no quantity variance permitted. All items must comply with stringent military specifications including MIL-STD-130N for unique item identification and UID marking, MIL-STD-129 for shipping and storage labeling, and MIL-STD-2073-1E for packaging and preservation using cold/dry methods. Inspection and acceptance occur at the destination and follow MIL-STD-1916 or comparable zero-based sampling plans with AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor attributes; critical threads must conform to FED-STD-H28/20 System 22. The item is designated as a critical application item requiring source inspection, and no mercury or mercury compounds may be intentionally introduced except in limited, specified exemptions such as batteries or sensors per NAVSEA 5100-003D. The contract enforces a comprehensive suite of cybersecurity and compliance requirements under CMMC Level 2 self-assessment, with mandatory adherence to NIST SP 800-171 and DFARS clauses covering safeguarding covered defense information, cyber incident reporting, and prohibitions on covered telecommunications equipment. Contractors must comply with hazardous material handling standards, including hazard communication labeling under 29 CFR 1910.1200, and are barred from using hexavalent chromium. Payment must be submitted via WAWF using invoice and receiving report formats, with no alternative methods permitted. The contract includes multiple FAR and DFARS clauses addressing subcontractor reporting, combating trafficking, employment eligibility verification, and whistleblower protections, with deviations applied to several provisions effective February 2026. All submissions must be made through DIBBS, and offerors must hold a valid UEI and CAGE code while certifying compliance with socioeconomic status and federal prohibitions on procurement from Communist Chinese military companies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICAL C
Solicitation # SPE7M2-26-T-5945
This contract specifies the procurement of a backshe ll for an electrical connector identified by NSN 5935013181201 and part number M85049/48-1-2F, meeting the SAE AS85049F Revision F standard dated April 1, 2021. The item is classified as a Qualified Products List (QPL) item, requiring the manufacturer to be QPL-approved at the time of award, with strict adherence to procurement note H01 governing connector assemblies and electrical contacts. The product must comply with DLA’s master list of technical and quality requirements, including configuration change management, removal of government identification from non-accepted supplies, and physical identification marking standards. Mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional uses such as batteries, certain instruments, or chemical reagents specified by NAVSEA, and portable devices containing mercury must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The item must be packaged per MIL-STD-2073-1E and labeled in accordance with MIL-STD-129, with no special marking required. A total quantity of 1,329 units is required at a unit price of $1,329.00, with zero tolerance for variance in quantity. Delivery is due within 165 days from contract award, FOB origin, with inspection and acceptance occurring at the destination. The delivery address is DLA Distribution Warner Robins, Robins AFB, GA, with shipping details governed by DLAD proc notes C19 and C20. The original required delivery date is March 27, 2027, with a need ship date of January 26, 2027. The contract falls under NAICS code 334417 and was issued under solicitation SPE7M2-26-T-5945, with David Larsen designated as the primary point of contact.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325998
New
DIBBS
FLUX, BRAZING
Solicitation # SPE7M2-26-T-5940
This contract is for the procurement of 6 jars (8 oz each) of Type A brazing flux with a NSN of 3439-00-913-4750, under solicitation SPE7M2-26-T-5940. The item is classified as a Type I (CODE H) critical application item with a non-extendable shelf life of 12 months, requiring strict compliance with shelf-life control markings and packaging standards. All supplies must adhere to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, including the special marking code 32 for Type I shelf life, and must meet ASTM-D-3951 and ICAO technical standards. Packaging must follow DLA’s procurement requirements and be palletized accordingly, with delivery FOB destination within 20 days and no variance allowed in quantity. The item is subject to configuration change management, hazardous communication standards, and strict prohibitions against intentional use of mercury or mercury-containing compounds, except for specific approved applications such as functional batteries or instruments as defined by NAVSEA, which must also include secondary containment. The contract requires full and open competition with performance controlled by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the revision effective on the solicitation issue date governs compliance. Government identification must be removed from non-accepted supplies, and all items must be inspected and accepted at the destination point.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
TAIL ROD
Solicitation # SPE7M2-26-T-5944
The contract pertains to the procurement of a TAIL ROD with NSN 1720-00-939-0093, quantity of 13 units, under solicitation SPE7M2-26-T-5944, with a response deadline of August 13, 2026, and delivery expected in 305 days after order award. The item is associated with technical data subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including foreign national employees and subsidiaries of U.S. companies, without prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted exclusively to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA. The place of performance is specified as New Cumberland, Pennsylvania, 17070-5002, and the contracting office operates under the Department of Defense’s Nuclear Reactor Program. Primary point of contact is Alisha Blanton, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M2-26-T-5960
This contract pertains to the procurement of a rotary switch designated by part number M15743/3-001 and associated first article testing units, governed by military specifications MIL-DTL-15743G and MIL-DTL-28786, with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The item is classified as a critical application product requiring full and open competition, with mandatory first article testing as outlined in MIL-DTL-15743 paragraphs 3.2 and 4.3, and in accordance with FAR clause 52.209-3. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; attributes are to be verified at V7, V4, and V2 levels or corresponding AQLs of 0.1, 1.0, and 4.0. The use of ozone-depleting substances is strictly prohibited in any manufacturing or testing process unless prior written approval is obtained from the contracting officer, and mercury or mercury-containing compounds are banned except in specific functional applications such as batteries, fluorescent lights, or certain instrument controls, with additional containment requirements for portable devices. All supplies must be packaged, marked, and shipped per MIL-STD-2073-1E and MIL-STD-129, adhering to DLA Packaging Requirements and preservation standards specified in SPE7M2-26-T-5960 Section B. The unit of issue is each (EA), with delivery required FOB origin within 384 days for the main line item and a separate line item for first article testing, where the quantity of one unit signifies the test requirement and no separate charge is assumed unless otherwise cited. Inspection and acceptance occur at origin, with zero quantity variance allowed. The item is to be delivered to DLA Distribution at the New Cumberland facility, and the contract enforces compliance with hazardous materials shipping protocols under IP025. The contract solicitation number is SPE7M2-26-T-5960, with a response deadline in August 2026 and a required delivery date of June 2027, with the contractor responsible for meeting all technical, environmental, and logistical conditions without exception.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333413
New
DIBBS
FAN, CENTRIFUGAL
Solicitation # SPE7M2-26-T-5957
The contract is for the procurement of 16 centrifugal fans, identified by NSN 4140016928425 and part number DG-011472-02, under solicitation SPE7M2-26-T-5957. The unit price is $16.00 per unit with a total contract value of $256.00, and delivery is required within 151 days after award, with FOB origin terms and zero variance allowance on quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and containment as defined by QUP 001, PRES MTHD 41, and packaging code U. Marking must follow MIL-STD-129 with no special marking codes applied, and palletization must adhere to DLA standards. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same location serving as the freight shipping point. The original required delivery date is August 31, 2027, with a needed ship date of January 12, 2027. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The contract falls under NAICS code 333413 and is managed by the Department of Defense’s Nuclear Reactor Program, with David Larsen listed as the primary point of contact.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
PANEL, CONTROL, ELECT
Solicitation # SPE7M2-26-T-5954
The contract is for the procurement of a single electronic control panel with NSN 6930-01-498-1131 and part number 9211-96-0001, supplied by Prime Technology LLC under solicitation SPE7M2-26-T-5954. Seven units are required at a unit price of $7.00, totaling $49.00, with delivery due within 165 days under FOB origin terms. Inspection and acceptance occur at the destination, with zero variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and marking must adhere to MIL-STD-129 with no special markings required. All packaging is subject to DLA’s official packaging requirements, and palletization must meet RD001 standards. The item is classified under NAICS 334519 and awarded as a Total Small Business Set Aside. The contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List, and applies the version of the list in effect on the solicitation issue date. It strictly prohibits intentional addition of mercury or mercury compounds to the supplied hardware, with narrow exceptions for batteries, fluorescent lights, sensors, weapon systems, and specified chemical reagents, subject to NAVSEA 5100-003D containment standards. Cybersecurity compliance requires a CMMC Level 2 self-assessment. Government identification must be removed from non-accepted supplies, and the unit of issue conforms to DoD standards. The contracting activity is the Department of Defense’s Nuclear Reactor Program, with performance to be delivered to Tracy, CA, and primary point of contact listed as David Larsen.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE7M2-26-Q-0705
This contract specifies the procurement of electrical insulation sleeving identified by NSN 5970-00-954-1624, with a total quantity of 25,530 feet to be delivered within 150 days after award. The product must comply with the SAE AS23053C Revision C standard dated November 1, 2023, and its specified part number M23053/5-107-0, which governs its technical design and performance. It is classified as a commercial item and a critical application item, requiring strict adherence to all referenced specifications without deviation. The contract explicitly prohibits the intentional use of mercury or mercury-containing compounds except in narrow, predefined applications such as batteries, fluorescent lamps, sensors, or weapon systems, and mandates shock-proof design with secondary containment for portable devices containing mercury in compliance with NAVSEA 5100-003D. Ozone-depleting chemicals are strictly forbidden, and any substitute chemicals must be submitted for approval unless explicitly authorized. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking required and palletization governed by DLA’s packaging requirements. Inspection and acceptance both occur at destination, with a zero-tolerance quality control standard mandating zero non-conformances in the sample lot under MIL-STD-1916, ASQ H1331, or an equivalent zero-based sampling plan. Attributes not otherwise defined are treated as major with a specified AQL of 1.0. The items are not required to have Item Unique Identification as per DFARS 252.211-7003(c)(1)(i), though other quality provisions including Qualified Products Lists, Configuration Change Management, and the removal of government identification from rejected supplies remain enforceable. Covered defense information may apply, and all technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List. The contract is issued under solicitation SPE7M2-26-Q-0705 by the Department of Defense’s Nuclear Reactor Program, with delivery destined to Tinker AFB.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M2-26-T-5953
This contract requires the procurement of a qualified electrical connector assembly identified by part number D38999/20WD35PB and NSN 5935-01-399-7234, with a total quantity of 305 units to be delivered within 165 days under FOB origin terms. The item must comply with MIL-DTL-38999/20H and MIL-DTL-38999N specifications and is classified as a critical application item, requiring strict adherence to quality and traceability standards. Only manufacturers with approved CAGE codes—Amphenol (77820), Matrix (14283), or Pyle National (49367)—are eligible, and units produced between July 2006 and June 2016 are explicitly prohibited regardless of condition. Traceability documentation may be demanded to verify manufacturing dates and sources, and only part numbers listed on the Qualified Products List at the time of award are acceptable. The connector must be free of intentional mercury or mercury compounds, with exceptions limited to specific functional uses such as batteries, sensors, or naval instrument components, all of which must meet additional containment and safety standards per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 without special marking codes. Units must be shipped to the designated delivery point at Robins Air Force Base, Georgia, with no variance allowed in quantity. The contract enforces full and open competition and includes compliance with DLA packaging, quality, and hazardous materials protocols. The solicitation number is SPE7M2-26-T-5953, with a response deadline of August 13, 2026, and a required ship date of January 26, 2027, while the original delivery target is March 1, 2027. Inspection and acceptance occur at the destination, and all units are subject to government verification prior to payment. The contract is managed by the Department of Defense under the Nuclear Reactor Program, with David Larsen as the primary point of contact.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details