Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WASHER, FLAT

Active
SPE4A6-26-T-05LXFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of two flat washers with NSN 5310-01-702-2314 and part number M32687/1-29, manufactured in compliance with MIL-DTL-32687/1 Revision D dated 05/15/2023. Delivery is required within ten days FOB origin to Fort Stewart, Georgia, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must adhere to MIL-STD-2073-1E with specific packaging codes and methods, including identification marking per MIL-STD-129 and physical identification per MIL-STD-130N. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be verified at designated levels. The supplier must maintain CMMC Level 2 self-assessment compliance and follow DLA packaging requirements. The contract includes restrictions on government identification removal, prohibits parcel post shipping, and mandates shipment via the fastest traceable means. All technical and quality requirements referenced are governed by the DLA Master List, with revision control tied to the solicitation or award date. The delivery point and freight shipping address are identical, and the contract is issued under the Department of Defense's ASC Commodities Division with a response deadline of July 20, 2026.

General Info

Procure two flat washers, NSN 5310-01-702-2314, deliver FOB origin to Fort Stewart in ten days, comply with MIL standards, zero defects, CMMC Level 2.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

AWCF SSA, FORT STEWART, GA, 31314-0000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-05LX Request for Quotations DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Hannah Shimer
contact@example.gov

Full Description

Show more
WASHER,FLAT
WASHER,FLAT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Unless otherwise stated, identification marking shall be in accordance with paragraph 4.1.b(2) of MIL-STD-130N. This is in addition to any required manufacturer's logo, lot number, and material identification markings.


SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

TDP Rev A Gen 1 IAW BASIC NON GOVT STD MIL-DTL-32687/1 REVISION NR DTD 05/15/2023 PART PIECE NUMBER: M32687/1-29
SPE4A6-26-T-05LX
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017411152 0001 EA 2.000
NSN/MATERIAL:5310017022314
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:BD OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W81U3R
0003 CS BN CO A DISTRIBUTI
BLDG 1720A MCFARLAND AVE
AWCF SSA
FORT STEWART GA 31314-0000
US
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W81U3R
0003 CS BN CO A DISTRIBUTI
BLDG 1720A MCFARLAND AVE
AWCF SSA
FORT STEWART GA 31314-0000
US
MARKFOR
SPE4A6-26-T-05LX
SECTION B
PR: 7017411152 PRLI: 0001 CONT’D
W81U3R
0003 CS BN CO A DISTRIBUTI
BLDG 1720A MCFARLAND AVE
AWCF SSA
FORT STEWART GA 31314-0000
US
M/F: (TCN) W81U3R61802053
RDD: 555
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/07/2026
SPE4A6-26-T-05LX NSN/Part Number: 5310-01-702-2314 Quantity: 2 EA Purchase Request: 7017411152QTY: 2 Delivery: 10 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
THUMBSCREWThe contract pertains to the procurement of thumb screws identified by NSN 5305-01-010-2338, with a quantity of eight units to be delivered within five days of award. Delivery is FOB origin and acceptance occurs at the destination, with zero variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-P23199 Level B, and marking must adhere to MIL-STD-129 with no special markings required. The item is governed by the military part standard MS21316C Revision C dated March 18, 2025, and only hardware manufactured to the current revision of this standard is acceptable for orders placed after the solicitation date. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware or any packaging, preservation, or marking materials, except for functional uses in specific approved applications such as certain batteries, instruments, or chemical reagents specified by NAVSEA; portable devices containing mercury must include a secondary containment and be shock-proof. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. The contract incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation or award date. Shipment must be made via the fastest traceable means, excluding parcel post, to the specified delivery address at Naval Air Station Whidbey Island, with the required delivery date set for June 16, 2026.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Manufacture of Self-Locking Studs (NSN 5307-01-320-4090)The contract entails the full-scale manufacturing, testing, and delivery of self-locking studs identified by NSN 5307-01-320-4090, meeting all applicable DLA Master List requirements and military specifications. This includes end-to-end responsibilities such as sourcing qualified materials, precision machining, rigorous quality assurance protocols, proper packaging, and accurate marking in accordance with defense standards. The work must be performed to ensure full compliance with applicable technical and regulatory criteria without deviation, and all products are intended for delivery to the designated military point of performance in FPO, ZIP 09565. The opportunity is structured as a subcontract under the Department of Defense’s ASC Commodities Division, with a solicitation posted on July 12, 2026, and a firm response deadline of July 20, 2026. The NAICS code 332722 categorizes this as a work involving screw, nut, and bolt manufacturing, reflecting the technical nature of the components. All deliverables must satisfy stringent defense quality benchmarks, and the contractor is expected to manage the complete supply chain from raw material acquisition through final inspection and shipment, ensuring readiness for immediate use in military applications.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCEThe contract pertains to the procurement of a close tolerance screw defined by the part number NAS1581C3T16P under the non-government standard NAS1581 Revision 14 dated 03/31/2020, with all hardware manufactured after the solicitation date required to conform to the current revision of this standard. The item is classified as a critical application component and must comply with stringent dimensional inspection requirements per System 22 of FED-STD-H28/20 for all Class 3A and 3B threads, excluding self-locking nuts and threads below specified diameters. Sampling and inspection protocols must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances expected unless otherwise specified, and attributes are assigned verification levels or AQLs as defined by the drawing or specification. All items must be marked in compliance with MIL-STD-130N for identification, in addition to manufacturer logos and material codes, and must also satisfy government quality requirements listed in the DLA Master List, which supersede all other standards including ASTM D3951 for packaging. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements with palletization per DLA guidelines, and each unit must be labeled with the specified Unit of Issue (EA) and Quantity per Unit Pack (QUP 050) as outlined in the contract. The delivery is scheduled for 401 days after award, with FOB origin terms and inspection and acceptance occurring at the destination. The full quantity of 526 units is firm with no variance permitted, and procurement is tied to NSN 5305-01-059-0214 under Solicitation SPE4A6-26-T-05KA, with a required delivery date of August 26, 2027. The item will be delivered to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, following DLA transport protocols and procedures. The point of contact for the contract is Hannah Shimer of the DLA Commodities Division, and the solicitation was issued on July 12, 2026, with responses due by July 20, 2026.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract solicits 467 machine screws with NSN 5305-00-702-2407 under solicitation number SPE4A6-26-T-05HR, issued by the ASC Commodities Division of the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirement. Packaging must comply with DLA standards, and all items must be marked in accordance with MIL-STD-130N paragraph 4.1.b(2) for government identification, in addition to manufacturer logos, lot numbers, and material identifiers. Physical identification of the bare item must also meet specified marking criteria. The delivery deadline is 169 days after award, and the place of performance is New Cumberland, PA, with a response deadline of July 20, 2026. The NAICS code is 332722, and the primary point of contact is Ashley Jones-Turner, reachable via email or phone provided in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
CLAMP, HOSEThe contract pertains to the procurement of three hose clamps identified by NSN 4730-01-568-7487 and part number 1F40104-08C, with a total quantity of three units at a unit price of $3.00, resulting in a total price of $9.00. Delivery is required within five days of contract award, with FOB origin terms and no variance permitted in quantity. Inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129, and adherence to the DLA Master List of Technical and Quality Requirements takes precedence over any general packaging standards. The items must be palletized according to DLA packaging requirements and shipped via the fastest traceable means, explicitly excluding parcel post. The delivery address is specified as DTA PIF PIFA26084 at 6501 E 11 Mile Road, Warren MI 48397-5000. The required delivery date is July 9, 2026, and the solicitation number is SPE7M0-26-T-002R, with a response deadline of July 23, 2026. The contract is issued under a federal procurement framework by the Department of Defense, specifically the Maritime Supply Chain ESOC Buys, and is classified under NAICS code 332722 for hose and pipe fitting manufacturing.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details