Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WASHER, SHOULDERED A

Active
SPE7M2-26-T-6461Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Nuclear Reactor Program under solicitation number SPE7M2-26-T-6461, is for the procurement of 20 units of shoulder washers and straight shafts, identified by NSN 5310-01-723-0304. The contract requires delivery within 75 days after receipt of the order, with performance located in New Cumberland, Pennsylvania. The agreement mandates strict adherence to several regulatory and technical standards, including CMMC Level 2 certification for third-party assessment and compliance with DLA master technical and quality requirements. Significant emphasis is placed on security and legal compliance, specifically regarding Covered Defense Information and strict export controls under ITAR and EAR. Contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DOD export-control training to access the necessary technical data.

General Info

DOD procurement of 20 shoulder washers and shafts for delivery in New Cumberland.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7M2-26-T-6461.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUSA
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,SHOULDERED A
SHAFT,STRAIGHT
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5310-01-723-0304 Quantity: 20 EA Purchase Request: 7018030291QTY: 20 Delivery: 75 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
SLED
Purchase and Installation of Variable Frequency Drive for Selective Catalyst Reduction Tempering Air Fan
Solicitation # 2026-Informal-0453
The City of Pasadena Water and Power Department, Power Supply, has issued solicitation 2026-Informal-0453 for the purchase and installation of a Variable Frequency Drive for the Selective Catalyst Reduction Tempering Air Fan at the Glenarm Power Plant. The facility operates five natural gas-fired combustion turbine units, including simple cycle units GT-1 through GT-4 and combined cycle unit GT-5, which are primarily utilized for peak period power generation. The response deadline for this procurement is September 7, 2026. Prospective bidders must submit a comprehensive proposal package including a Vendor Questionnaire, legal status certification, and a Unique Entity Identifier obtained from SAM.gov. Requirements for submission include a Relevant Experience Form detailing past performance on projects of similar scope, a DoIT Technical Assessment Questionnaire to evaluate security and operational impacts, and federal certifications regarding lobbying activities. The procurement process is managed by the City of Pasadena Purchasing Division, with primary technical oversight provided by the Power Plant Shift Supervisor.
Water & Power Department, Power Supply

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CLAMP, HUB
Solicitation # SPE7L1-26-T-947J
The contract pertains to the procurement of six CLAMP, HUB items under NSN 3040-01-647-4730 through solicitation SPE7L1-26-T-947J, issued by the Defense Logistics Agency’s Land Supply Chain under the Department of Defense. Delivery is required within 20 days ADO, with the original delivery date set for August 13, 2026, and the place of delivery specified as the Commanding Officer, INS Tunir, in Mumbai, India, under FOB DESTINATION terms. The contract includes a strict compliance framework grounded in DLA Packaging Requirements for Procurement (RP001) and MIL-STD-2073-1E for packaging and preservation, as well as MIL-STD-129 for marking, labeling, and barcoding. Specific packaging codes, preservation methods, and container types are mandated, and palletization must adhere to DLA standards. The contractor must also comply with export control regulations under ITAR and EAR, restricting the disclosure of technical data to authorized parties only—those with approved U.S./Canada Joint Certification Program certification, completed DLA export control training, and prior authorization from DLA. Technical and quality compliance is further governed by numerous Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses, including mandatory cybersecurity requirements tied to CMMC Level 2 certification for third-party assessors and NIST SP 800-171 assessment obligations. Hazardous materials must be labeled according to OSHA’s Hazard Communication Standard and accompanied by Safety Data Sheets per Federal Standard No. 313, with exemptions for materials regulated under other statutes. Radioactive materials exceeding specified thresholds trigger additional labeling and notification obligations. Ocean transportation is subject to restrictions requiring use of U.S.-flag vessels unless a formal waiver is obtained, and post-shipment documentation including a detailed ocean bill of lading must be submitted within 30 days. The contractor must also comply with employment eligibility verification, anti-trafficking, sustainable products, and accelerated payment clauses for small business subcontractors, while small business status requires post-award representation updates under trigger events. Inspection and acceptance occur at origin under FAR 52.246-2, and invoicing must be conducted electronically through Wide Area WorkFlow (WAWF). Although no explicit pricing details are provided, historical unit costs from prior awards suggest the item may fall within a known
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 333613
New
DIBBS
UNIVERSAL JOINT, VEH
Solicitation # SPE7L3-26-T-202Y
This contract is a solicitation for the procurement of vehicle universal joints under NSN 252012338805. The requirement is split into two line items: CLIN 0001 for 5 units to be delivered to DLA Distribution Albany, Georgia, and CLIN 0002 for 53 units to be delivered to DLA Distribution Barstow, California. The total quantity requested is 58 units, with a required delivery date of February 28, 2027, and a need ship date of February 16, 2027. The agreement specifies FOB Origin shipping with inspection and acceptance occurring at the destination. Compliance with DLA Master List technical and quality requirements is mandatory, specifically regarding packaging, marking, and the handling of hazardous materials. The solicitation is designated as a Total Small Business Set-Aside under NAICS code 333613 and is managed by the Department of Defense Land Supplier Operations Vehicle Support.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
GEAR, ANTIBACKLASH, S
Solicitation # SPE7M0-26-T-053B
This contract is for the procurement of 17 antibacklash spur gears, identified by NSN 3020-01-122-6958 and part number 40259-101 from Fisica Applied Technologies, Inc. The items are intended for use in the AN/MST-T1 radar system. The solicitation, numbered SPE7M0-26-T-053B, was issued by the Department of Defense Maritime Supply Chain ESOC Buys. Delivery is required within 78 days, with a need ship date of April 7, 2026, and a required delivery date of April 20, 2026. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to the DLA Master List of Technical and Quality Requirements, including RP001 and RA001.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333613
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L4-26-T-6515
This solicitation, issued by the Department of Defense under the agency LSO Combat Vehicles and Armament, requires the procurement of 25 units of part number 0001S00000052 with a delivery timeline of 329 days after order. Bidders must select Other Equivalent and provide documentation regarding current dealer or distributor certification and accreditation. Fast Pay is not applicable to this solicitation. A critical requirement of this contract is the First Article Testing process. The contractor must deliver two units of item 3020 / 8943819 to the Fleet Readiness Center East in Cherry Point, North Carolina, within 45 calendar days of the contract date. The government will then provide written notification of approval, conditional approval, or disapproval within 120 calendar days of receipt.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
CLUTCH, SPRAG
Solicitation # SPE7L1-26-T-01Z9
This contract is for the procurement of 15 units of a sprag clutch, identified as a critical application item with part number 3054348-01 from Pratt & Whitney Canada Corp and NSN 3010-00-139-1918. The solicitation, numbered SPE7L1-26-T-01Z9, is issued by the Department of Defense Land Supply Chain. Delivery is required within 171 days, with a need ship date of February 3, 2026, and an original required delivery date of July 18, 2026. The items are to be delivered FOB Origin to DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling. Compliance with the DLA Master List of Technical and Quality Requirements is required, along with a CMMC Level 2 self-assessment for cybersecurity. Inspection and acceptance will take place at the origin, and the contract specifies a zero percent quantity variance.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7M4-26-T-363S
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 13 shoulder-style shaft assemblies under part number 0001S00000052. The contract is designated as a Women-Owned Small Business set-aside with a delivery requirement of 494 days after receipt of order. Performance will take place at Tinker AFB. The procurement is subject to strict export control regulations under ITAR and EAR, meaning technical data cannot be shared with foreign nationals without prior authorization from the Department of State or Commerce. Eligible contractors must possess an approved US/Canada Joint Certification Program certification and have completed specific DLA export-control training and questionnaires to access the necessary technical data.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIG
Solicitation # SPE7L3-26-T-203C
This contract is for the procurement of 10 units of a rigid connecting link, identified by NSN 3040014201192 and Sargent Aerospace and Defense part number 25039-1005-1. The item is designated as a critical application item. Delivery is required within 137 days, with a need ship date of August 18, 2026, and an original required delivery date of March 2, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Environmental restrictions are in place prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Item Unique Identification is not required for this order. Inspection and acceptance will occur at the destination.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
AUGER, MIXING
Solicitation # SPE7L3-26-T-202Z
This contract is for the procurement of one mixing auger, identified by NSN 3040016570546 and Cemen Tech part number 2546-238-00. The item is designated as a critical application item with no specific shelf life requirement. The order is managed under solicitation SPE7L3-26-T-202Z for the Department of Defense, specifically the Land Supplier Operations Vehicle Support agency. Key requirements include strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. The contract prohibits the use of Class I ozone depleting chemicals and requires the removal of government identification from any non-accepted supplies. Delivery is set for 68 days after receipt, with the destination and inspection point located at the DLA Distribution New Cumberland facility in Pennsylvania.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIG
Solicitation # SPE7L1-26-Q-1539
This contract is for the procurement of two rigid connecting links, identified as Navy Critical Safety Items and restricted source items requiring government engineering source approval. The primary components include the Pushrod Assembly (P/N 123C10211-601) and Tube (P/N 123C10211-611), which must be manufactured from 2024-T3/T42 aluminum alloy tubing. Manufacturing must adhere to the latest drawing revisions and specific processing standards, including magneforming, radiographic inspection, swaging, heat treatment, and Alodine 1200 chemical film coating. The contract strictly prohibits the use of ozone-depleting chemicals. Compliance requirements include CMMC Level 2 self-assessment, SAE AS9100 quality standards, and marking in accordance with MIL-STD-129. All items must be delivered to DLA Distribution San Joaquin in Tracy, California, with a delivery timeline of 770 days after order. Inspection and acceptance will occur at the origin. Any requests for waivers or deviations must be approved by the DSC contracting officer.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
GEAR CLUSTER
Solicitation # SPE7L4-26-T-6519
This solicitation, issued by the Department of Defense under the agency LSO Combat Vehicles and Armament, is for the procurement of four units of a gear cluster, specifically a hub high range clutch spur gear, identified by NSN 3020-00-771-5620. The contract is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 333613, with a delivery requirement of 534 days after order. Performance is designated for Anniston, Alabama. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific mandates for packaging, the removal of government identification from non-accepted supplies, and origin inspection and acceptance. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L3-26-T-203B
This contract is for the procurement of 27 units of shoulder shafts, identified by NSN 3040014463790. The agreement specifies various compatible part numbers from Daimler Truck North America and Aero Industries Inc. Delivery is required within 97 days, with a need ship date of July 29, 2026, and a final required delivery date of July 31, 2026. The items are to be delivered FOB Origin and will be received at DLA Distribution Red River in Texarkana, Texas. Compliance with DLA packaging requirements is mandatory, specifically adhering to ASTM D3951 and MIL-STD-129 for marking and labeling. The contract incorporates technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies. Inspection and acceptance will take place at the destination.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE7M2-26-T-6451
This contract is for the procurement of self-locking hexagon nuts, identified by NSN 5310-00-483-8790 and part number MS17829-6C. The total quantity requested is 28,621 units, divided across three delivery locations: DLA Distribution Depot Hill, DLA Distribution Cherry Point, and DLA Distribution New Cumberland. The items are classified as commercial and must be manufactured according to the current revision of the applicable part standards, including NASM17829 and NASM25027. Key requirements include strict adherence to MIL-STD-130N for identification marking and MIL-STD-129 for packaging. The contract mandates a total prohibition of mercury or mercury-containing compounds in the hardware, preservation, and packaging. Quality assurance is emphasized through the requirement of a Certificate of Quality Compliance and critical item source inspection. Delivery is specified as FOB Origin with a delivery window of 452 days, and the solicitation is designated as a HUBZone set-aside.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7M2-26-T-6432
This contract is for the procurement of 7,143 lock washers, identified by NSN 5310-01-053-0832 and part number MS51848-45. The items are classified as critical application items and must adhere to basic specification MS51848E. The agreement specifies a delivery timeline of 161 days, with a required delivery date of June 19, 2027, and a need ship date of February 9, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Jacksonville. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. A significant environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its packaging, with limited exceptions for specific functional components. The procurement is conducted under full and open competition for the Nuclear Reactor Program within the Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M2-26-T-6433
This contract is for the procurement of 10 electrical backshell cable clamp adapters, identified as commercial off-the-shelf items with NSN 5935014533009 and Glenair part number 380HA013NF2112A. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The required delivery date is April 13, 2027, with a delivery timeframe of 164 days after order. The agreement mandates strict adherence to DLA packaging, marking, and shipping requirements, specifically citing MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-55330 for connectors. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Inspection and acceptance will take place at the destination, and the contract follows a zero percent quantity variance policy.
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-T-6183
This contract, issued under solicitation SPE7M2-26-T-6183 by the Department of Defense’s Nuclear Reactor Program, solicits the supply of 7,597 electrical contacts identified by NSN 5999-01-082-0297, classified as a commercial item and listed on a qualified products list. Delivery is required within 220 days after award, with FOB Origin terms and final delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must comply with stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, along with packaging and preservation standards per MIL-STD-2073-1E, including preservation method 41 and packaging code U. Each unit pack must be marked in accordance with MIL-STD-129 and SAE AS39029, which mandates the display of both the current and most recently superseded part numbers on the label, though the requirement to include the superseded number may be waived as long as the present part number remains visible. Mercury and mercury compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, sensors, and weapon systems, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and all invoicing must be submitted electronically through Wide Area WorkFlow, consistent with contract clause requirements. The contract incorporates numerous FAR clauses including those related to equal opportunity, employment eligibility verification, combating human trafficking, safeguarding contractor information systems, and hazardous material identification, with multiple deviations approved under Deviation 2026-00038. The contractor must also comply with specific representation and certification requirements including UEI and CAGE code disclosures, size status affirmations, and socioeconomic status declarations if claiming small business status. No option quantities or pricing details are provided, and the contract is awarded under simplified acquisition procedures without a defined contract type beyond fixed-price. All submissions are required through the DIBBS portal by August 20, 2026, and performance is subject to the full scope of federal acquisition regulations and defense-specific standards.
Current-Carrying Wiring Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332996
New
DIBBS
UNION, PIPE
Solicitation # SPE7M2-26-T-6453
This contract is a solicitation for the procurement of 55 units of pipe unions, identified by NSN 4730012740397 and part number 5301-150 from Flagg Stanley G & Co Inc. The requirement is designated as a critical application item and is managed by the Department of Defense Nuclear Reactor Program. Delivery is required within 105 days, with a requested ship date of July 28, 2026, and a final delivery date of September 26, 2026, to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Because the manufacturing of these items may require specialized casting or forging tooling that the government does not possess, suppliers are directed to the DLA Casting and Forging Assistance Request process for necessary sourcing and technical information.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE7M2-26-T-6455
This contract is for the procurement of 1,594 hexagon head cap screws, identified by NSN 5305-00-087-3080 and part number SCB645759-312. The items must adhere to technical specifications outlined in basic drawing 80063 SC-B-645759 and reference standard NASM35308. This is designated as a critical application item, requiring strict adherence to sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. The delivery is set for 120 days after order, with a required delivery date of May 13, 2027, shipped FOB Origin to DLA Distribution Anniston in Alabama. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, specifically prohibiting the use of mercury or mercury compounds. Inspection and acceptance will take place at the destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M2-26-T-6163
The contract pertains to the procurement of 30 nonmetallic hose assemblies, each 360 inches in length, identified by NSN 4720-01-379-4569 and part number 88043-224, under solicitation SPE7M2-26-T-6163. The total contract value is $35,239.20 at a unit price of $1,174.64, with delivery due one day after order placement and an original required delivery date of January 26, 2027. All items must be delivered FOB destination to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s RP001 requirements, including preservation using the AE method and drying per CLNG/DRY:1. Hoses must be secured on reels or spools, enclosed in double-walled, weather-resistant ASTM-D5118 Type CF fiberboard containers, and wrapped with plastic plugs to prevent contamination. The outer packaging must be marked in accordance with MIL-STD-129 under special marking code ZZ, which mandates omission of item nomenclature due to the classification as protected cargo (Code 40), and includes orientation labels such as “ARROW UP” and “OPEN THIS SIDE.” The contractor must ensure that shelf life data is reported if applicable, with updates to be coordinated with DLA packaging and acquisition specialists. The contract incorporates multiple compliance requirements including Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment, safeguarding of covered defense information per FAR 52.240-93, and adherence to DFARS provisions on hazardous material labeling, ocean transportation restrictions using U.S.-flag vessels, and notification of potential safety issues involving radioactive materials exceeding specified activity thresholds. All shipments must be invoiced electronically via Wide Area WorkFlow (WAWF), and the contractor is subject to inspection and acceptance at the destination point. The contract includes clauses governing equal opportunity, prohibited arbitration agreements, accelerated payments to small business subcontractors, changes, and subcontracting, with deviations noted where applicable. Offerors must be registered in SAM.gov, provide their Unique Entity Identifier, and represent their socioeconomic status if claiming small business or other program benefits. The contractor must also submit Safety Data Sheets for any hazardous materials prior to award, and comply with
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7M2-26-T-6449
This contract, identified as SPE7M2-26-T-6449, is a solicitation from the Department of Defense Nuclear Reactor Program for the procurement of 23 plain hexagon nuts under NSN 5310012930849. The items are designated as critical application items and must adhere to specific technical and quality requirements, including MIL-STD-130N for identification marking and MIL-STD-129 for general marking. Delivery is required within 105 days, with a need ship date of May 19, 2026, and an original required delivery date of October 16, 2026. The agreement specifies that the delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. Strict environmental regulations are in place prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware or its packaging. Packaging and palletization must comply with MIL-STD-2073-1E and DLA packaging requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE WO
Solicitation # SPE7M2-26-T-6452
This contract is for the procurement of 36 units of fixed, wire wound, inductive resistors under solicitation SPE7M2-26-T-6452. The items are designated as critical application items and must adhere to specific technical data packages, including basic drawing 16236 LO-012188664 and reference drawing 53711 5348407. Delivery is required within 143 days, with a need ship date of January 26, 2027, and a final required delivery date of June 25, 2027, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must comply with strict quality and packaging standards, including MIL-STD-129 for marking and RP001 for palletization. Specific requirements include the identification of lead or lead-free attributes per IPC/JEDEC J-STD-609 and a prohibition on the intentional addition of mercury. Inspection and acceptance will occur at the origin. All requests for waivers or deviations must be submitted to the DSC Contracting Officer for approval, and any costs for data deliverables must be factored into the unit price.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
TERMINAL JUNCTION BLOC
Solicitation # SPE7M2-26-T-6434
This contract is for the procurement of 128 units of sectional terminal junction blocks, identified by NSN 5940-01-433-8933. The items are classified as critical application items and must adhere to the Qualified Products List or Qualified Manufacturers List. Technical specifications are governed by SAE AS81714D and AS81714/17 standards, with a strict prohibition on the intentional addition of mercury or mercury-containing compounds except where functionally required by specific NAVSEA exceptions. The agreement specifies a delivery timeframe of 140 days, with a required delivery date of March 20, 2027, shipping FOB Origin to the DLA Distribution Depot Hill at Hill AFB, Utah. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract incorporates several technical and quality requirements, including configuration change management and the removal of government identification from non-accepted supplies.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7M2-26-T-6169
The contract calls for the procurement of 30 plain hexagon nuts, item type I, with a 0.875-inch diameter and thread specification of 0.875-14UNF-2B, manufactured from nickel alloy grade 500 in an annealed and hardened condition. The item is defined by the military specification MIL-DTL-1222J and is designated as a commercial item, allowing for procurement under simplified acquisition procedures. Each nut must be permanently marked with the material symbol .K., the manufacturer’s symbol, and a lot number per MIL-DTL-1222J, and additionally carry an item identification mark compliant with MIL-STD-130N, including a machine-readable 2D Data Matrix barcode for unique identification. The product is classified as a critical application item, requiring strict adherence to quality assurance standards; sampling must follow MIL-STD-1916 or ASQ H1331, with critical attributes held to an AQL of 0.1, major attributes to 1.0, and minor attributes to 4.0. Zero non-conformances are required in the sample lot unless otherwise specified. Packaging must comply with MIL-STD-2073-1E, using packaging code U, dry climate preservation method 10, with no desiccants or corrosion inhibitors. Each unit container holds 10 nuts, with intermediate containers coded D3, and palletization must meet DLA’s RP001 packaging requirements. Items must be marked per MIL-STD-129 with special marking code 00, indicating no additional special markings are required. Delivery is FOB origin to DLA Distribution San Joaquin, Warehouse 57 in Tracy, California, with a 165-day delivery timeline from the award date and a need ship date of February 2, 2027. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for explicitly allowed applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof construction and a secondary containment barrier. Compliance with FAR and DFARS clauses is mandatory, covering equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguards, safeguarding covered defense information, prohibitions on covered telecommunications equipment, whistleblower rights, and restrictions on mandatory arbitration
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332999
New
DIBBS
CLAMP, WIRE ROPE, SADDLE
Solicitation # SPE7M2-26-T-6431
This contract is for the procurement of 132 saddled wire rope clamps, identified by NSN 4030-00-243-4438. The items are designated as critical application items and must be manufactured using a forging process, requiring specific tooling. Production must adhere to technical and quality requirements set forth in the DLA Master List, with preservation and packaging following MIL-DTL-12000 and marking in accordance with MIL-STD-129. Delivery is required within 62 days, with a required delivery date of December 1, 2026, to the DLA Distribution New Cumberland facility in Pennsylvania. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or packaging. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details