Top

Water Filtration and Treatment Equipment Supply

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

California → City of Cerritos

NAICS

333992 - Welding and Soldering Equipment ManufacturingView NAICS

Place of Performance

Cerritos, CA, 90703

Set-Aside

NONE

Documents

This scope was carved out of C-4 Well site re-design and water treatment design.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 27

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyCalifornia → City of Cerritos

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → City of Cerritos

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of treatment tanks, filtration units, and associated components for removal of PFOS, manganese, and arsenic from groundwater.

Similar Contracts

Same NAICS industry code

NAICS: 333992

New

SLED

Simultaneous Cold Metal Transfer Welding Unit - Sole Source

Solicitation # oregon-state-university-1286155

Oregon State University is seeking a sole source contract with Fronius USA LLC for the procurement of a Simultaneous Cold Metal Transfer Welding Unit. This specialized equipment is required for Wire Arc Additive Manufacturing and is distinguished by its ability to combine two electrically isolated wire electrodes into a single weld pool. The unit must provide up to 60 percent higher deposition rates than standard CMT while maintaining low heat input, ensuring arc stability and consistent bead geometry for layer-by-layer manufacturing. It is designed to support various materials, including titanium, aluminum, and high-strength steels, while reducing material waste and post-processing time. The solicitation, identified by number oregon-state-university-1286155, was posted on August 28, 2026. The deadline for responses and any challenges to the sole source determination is September 4, 2026. Interested parties or those wishing to challenge the determination should contact Scott Lommers via email.

Oregon State University

POSTED

DEADLINE

F7003-250869 - Pulse Laser Cleaning Machine

Solicitation # WS5853035266

The Government of Canada, through the Department of Public Works and Government Services, has issued solicitation WS5853035266 for the procurement of a Pulse Laser Cleaning Machine. This federal opportunity is designated for performance in Nova Scotia and is managed by contracting authority Brodie White. Interested parties must submit their responses by the deadline of September 15, 2026. The official notice was posted on August 28, 2026, and further details regarding the tender can be accessed through the CanadaBuys portal.

Department of Public Works and Government Services

POSTED

DEADLINE

Sourcing of Individual Kit Components (Sub-Supplier)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

GUIDE, WIRE, GAS SHIE

Solicitation # SPE8E5-26-T-4076

This contract, identified as SPE8E5-26-T-4076, is a solicitation by the Defense Logistics Agency for the procurement of two gas shield wire guides, identified by NSN 3431014567023. The items are associated with Miller Electric Mfg. LLC part numbers 079 599 and 11B5090957-2. Delivery is required within 10 days of order, with a required delivery date of August 24, 2026, shipping FOB Origin to Fort Sill, Oklahoma. The agreement mandates strict adherence to DLA packaging requirements, including RP001 and MIL-STD-129, with packaging specifically following ASTM D3951. Technical and quality requirements are governed by the DLA Master List, and the contract specifies that the shipment must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post. Inspection and acceptance will take place at the destination.

Defense Logistics Agency

POSTED

DEADLINE

Commercial Weighing Scale Supply and DeliveryThis subcontract, issued by the Department of Defense under the Medical Supply Chain FSH, requires the supply and delivery of a commercial-grade weighing scale. The equipment must feature a 400 LB or 160 KG capacity with 1/4 LB or 100 G graduation and include a height rod with 1/8 inch or 1 mm graduation. All items must be compliant with NSN 6530016806354 and delivered to the place of performance in APO 96260-5479 within 84 days. The procurement is categorized under NAICS code 333992. The solicitation was posted on August 25, 2026, with a response deadline of September 1, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-4066

This contract, identified as solicitation SPE8E5-26-T-4066, is issued by the Defense Logistics Agency for the procurement of one cutting torch tip, NSN 3433-01-147-5627. The required item must be compatible with Harris models 62-3 and 42-3 hand cutting torches and corresponds to part number 6290-1-GG from National Torch Tip Co Inc or Lincoln Electric Co. The procurement falls under NAICS code 333992 and requires delivery within five days after the order is placed. The shipment is designated as FOB Origin with inspection and acceptance occurring at the destination in Jacksonville, Florida. Packaging must adhere to DLA packaging requirements for procurement, specifically RP001 and MIL-STD-129, with hazardous materials requiring compliance with TQ requirement IP025 or commercial packaging per ASTM D3951 for non-hazardous items. The contract incorporates various technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies.

Defense Logistics Agency

POSTED

DEADLINE

HANDLE, WELDING, CUTT

Solicitation # SPE8E5-26-T-4069

This contract, identified as SPE8E5-26-T-4069, is a solicitation by the Defense Logistics Agency for the procurement of one welding and cutting handle, part number 1401300, with NSN 3433-01-324-3813. The order specifies a delivery timeframe of five days after the order is placed, with the shipment being delivered FOB Origin and inspected and accepted at the destination in Jacksonville, Florida. The agreement mandates strict adherence to DLA packaging, marking, and shipping requirements, including MIL-STD-129 and ASTM-D-3951-98 standards. It also incorporates specific technical and quality requirements via the DLA Master List and requires the removal of government identification from any non-accepted supplies. Shipping must be conducted via the fastest traceable means, explicitly prohibiting the use of parcel post.

Defense Logistics Agency

POSTED

DEADLINE

PARTS KIT, ELECTRONIC E

Solicitation # SPE7M5-26-T-440Q

This contract is for the procurement of one electronic equipment parts kit, identified by NSN 5999013874275 and part number 7222313-00. The kit is a critical application item consisting of specific components, including part numbers 7908945-02, 7908147-01, 7908695-06, and 7916130-00. Delivery is required within 20 days after order, with a final required delivery date of August 27, 2026, shipping to Davis Monthan AFB in Arizona. The agreement mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 self-assessment and specific packaging standards per MIL-STD-2073-1 and MIL-STD-129. Quality assurance will be managed through zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. The contractor must ensure all kit components are properly cushioned, listed, and barcoded in a single box, with shipping conducted via traceable means.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M5-26-T-442R

This contract is for the procurement of two power transformers under solicitation SPE7M5-26-T-442R for the Department of Defense. The requirement specifies NSN 5950-00-418-3820 and identifies approved part numbers from Precision Electronics Inc, B G Laboratories Inc, and ElbitAmerica Inc. The delivery timeline is set for 46 days after receipt of order, with a required delivery date of March 12, 2026, and a need ship date of June 9, 2026. Shipping is FOB Origin and destined for DLA Distribution Jacksonville, Florida. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-129 for labeling and RP001 for palletization. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-defect acceptance policy for sample lots. Technical and quality requirements are further defined by the DLA Master List, and any non-accepted supplies must have government identification removed per requirement RQ011. Inspection and acceptance will take place at the destination.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

OEM On-Site Technical Representative ServicesThis subcontract opportunity with the Department of Defense at the Pearl Harbor Naval Shipyard IMF requires an authorized OEM representative to provide technical on-site services. The scope of work involves the removal, installation, start-up, testing, and certification of two High Pressure Air Compressors, ensuring all activities align with proprietary OEM and government specifications. The project is categorized under NAICS code 333992 and will be performed at JBPHH. Interested parties must submit their responses by September 28, 2026, following the posting date of August 25, 2026.

Pearl Harbor Naval Shipyard IMF

POSTED

DEADLINE

Modular Lab Deck and Substrate HandlingThe National Energy Technology Lab, under the Department of Energy, is seeking a subcontractor for the Modular Lab Deck and Substrate Handling project. This contract involves the supply of a modular deck structure, wafer and planar substrate racks, and grippers specifically designed for substrates measuring 20 to 25 mm. Additionally, the scope includes the provision of vial handling systems capable of managing a range of containers from 2mL HPLC vials to 250mL bottles. The solicitation is categorized under NAICS code 333992 and was posted on August 25, 2026. Interested parties must submit their responses by the deadline of September 4, 2026, at 8:00 PM. Further details and submission guidelines are available through the provided FedConnect link.

National Energy Technology Lab

POSTED

DEADLINE

Auxiliary & Fire Prevention SystemsThis subcontract opportunity, managed by the Department of Homeland Security's Sflc Procurement Branch 2, focuses on the maintenance of auxiliary machine systems and the implementation of fire prevention measures during drydocking operations. All work must be performed in strict accordance with SFLC Standard Specifications 5000 and 5550. The project falls under NAICS code 333992 and is designated as a total set-aside for small businesses. The solicitation was posted on August 24, 2026, with a response deadline of September 11, 2026, at 4:00 PM. Interested parties must ensure all submissions are completed by this date to be considered for the contract.

Sflc Procurement Branch 2(00085)

POSTED

5 days ago

DEADLINE

in 13 days

View Details