This Government Contract opportunity from Missouri was posted on January 24, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Water Storage Tank Interior/Exterior Painting and Coating Application

Closed

State & Local

Submission Closed02/25/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290

New

ACT-1033-01 NAS Perimeter Door Replacement Bldg. 300 at the William J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city

This contract, solicitation number act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city, involves the provision and installation of two sets of interior commercial door assemblies at the NAS laboratory facility, Building 300, located within the William J. Hughes Technical Center at Atlantic City International Airport. The scope of work encompasses the replacement of existing doors as well as necessary modifications, reframing, and finishing of the existing metal stud gypsum wall board door openings. Managed by PTSI Managed Services Inc., the project has an estimated construction magnitude between 250,000 and 500,000 dollars. This opportunity is set aside for small businesses, including certified veteran-owned, service-disabled veteran-owned, women-owned, and HUBZone small businesses. The solicitation was posted on October 28, 2026, with a response deadline of November 18, 2026.

PTSI Managed Services Inc.

POSTED

DEADLINE

Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)

Solicitation # Panic Hardware (Electrical Room Egress Doors)

Management & Training Corporation (MTC) is soliciting bids for the installation of panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. This fee-for-service subcontracting opportunity requires the contractor to perform a site survey, supply heavy-duty Grade I commercial-grade panic bars with matching exterior trim and closers, and complete the installation. All work must adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and ADA standards. To ensure fail-safe operation, the contractor must perform at least 10 consecutive cycle tests upon completion. The solicitation is open to small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities. Interested bidders must submit a lump sum price, a completed supplier packet including a W-9 and self-certification form, and three references for similar projects by December 1, 2026. Requirements for award include Idaho state licensure, specific insurance minimums, and a Unique Entity Identification (UEI) number. The project is subject to federal regulations, including Davis-Bacon Act prevailing wage rates for Canyon and Gem Counties, and various FAR clauses regarding small business utilization, security requirements, and the prohibition of certain foreign purchases.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

Specialty Metals & RailingsThis subcontract opportunity, titled Specialty Metals & Railings, is issued by the Infrastructure and Planning agency in California for projects associated with the West County Wastewater District. The selected contractor will be responsible for the supply and installation of metal guardrails and secure anchorage into concrete and masonry. All work must be performed according to specific project specifications to ensure the delivery of fully installed safety railings and anchorages for prime contractors. The solicitation was posted on October 28, 2026, with a response deadline of December 16, 2026. This procurement falls under NAICS code 238290, focusing on specialized metal railing and safety installation services. Interested parties can find further details through the provided procurement portal.

Infrastructure and Planning

POSTED

DEADLINE

Overhead Door Maintenance and Repair ServicesThis subcontract for Overhead Door Maintenance and Repair Services involves providing semi-annual preventative maintenance and on-call repair services for prime contractors working on Maryland State Highway Administration facility projects in Wicomico County. The scope of work includes critical technical tasks such as checking track bolts, inspecting spring tension, lubricating rollers and hinges, adjusting door alignment, and removing rust to ensure doors remain fully operational. The contract requires that all technicians possess a minimum of two years of professional experience in overhead door repairs. Successful delivery of the contract is contingent upon the provision of maintained operational doors and the submission of completed semi-annual inspection reports. Interested parties must respond by November 18, 2026.

State Highway Administration

POSTED

DEADLINE

Foodservice Equipment Supply and InstallationThis subcontract for Foodservice Equipment Supply and Installation involves providing and installing commercial kitchen equipment for prime contractors on facility projects located in Orange County, Florida. The scope of work includes the installation of freestanding counters, stainless steel counter bodies, and specialized kitchen equipment to deliver a fully equipped and operational commercial food service area. All provided fabrications must strictly adhere to NSF Standards and be UL listed to ensure safety and regulatory compliance. Interested parties should note that the response deadline for this opportunity is December 1, 2026, and the project falls under NAICS code 238290.

Administrative Svcs., Procurement Division

POSTED

DEADLINE

Window and Door Installation ServicesThis subcontract for Window and Door Installation Services involves the removal of existing units and the installation of new replacements for prime contractors working on Nuneaton and Bedworth Borough Council property projects. The scope of work includes removing legacy units, preparing openings, installing frames and sashes, and ensuring all units are properly sealed and weatherproofed. To accommodate multi-story stock, the contractor is expected to utilize scaffolding and Mobile Elevating Work Platforms. All work must be performed in strict compliance with UK building regulations, specifically regarding fire safety and thermal performance. The final deliverable consists of fully installed and weather-sealed units. Interested parties must submit their responses by the deadline of December 18, 2026.

Nuneaton and Bedworth Borough Council

POSTED

DEADLINE

Furnace Site Preparation and InstallationThis small business set-aside subcontract, managed by the Department of Defense under the Army Contracting Command - Rock Island, involves the physical installation and site preparation of a free-standing vertical cylinder furnace in Rock Island. The selected contractor will be responsible for industrial rigging, electrical hookups, and coordination with RIA-JMTC IT Support to ensure proper workstation connectivity, ultimately delivering a system ready for TUS/SAT testing. The project falls under NAICS code 238290 and was posted on October 27, 2026, with a response deadline of November 18, 2026. The scope of work requires the subcontractor to support prime contractors in executing the technical installation and site readiness requirements necessary for the furnace's operational deployment.

POSTED

DEADLINE

Garage Door Preventative MaintenanceThis subcontract opportunity, titled Garage Door Preventative Maintenance, is issued by the Department of the Interior's Fws Contracting Activity. The project involves providing general maintenance and seal replacement for up to ten roll-up garage doors at U.S. Fish and Wildlife Service facilities. The selected contractor will be responsible for performing preventative maintenance, replacing side seals as necessary, and ensuring all doors operate smoothly and safely according to industry standard practices. Deliverables include the replaced side seals and detailed maintenance reports. The contract is designated as a Total Small Business Set Aside under NAICS code 238290. Interested parties must submit their responses by the deadline of November 7, 2026. This role serves as a subcontractor supporting prime contractors on these specific federal facility projects.

Fws Contracting Activity

POSTED

DEADLINE

Sectional Overhead Door InstallationThis subcontract opportunity, managed by the Fws Contracting Activity under the Department of the Interior, involves the installation of sectional overhead doors for U.S. Fish and Wildlife Service facility projects. The scope of work requires the removal of three existing roll-up garage doors and the installation of three new sectional overhead doors featuring 2 inch tracks, 12 inch radii, angle-mounted configurations, and torsion spring systems rated for a minimum of 10,000 cycles. The contractor is responsible for verifying field measurements and ensuring that pad surfaces are flush with the jambs to deliver fully functional installations. The project is designated as a total Small Business Set Aside under NAICS code 238290. Interested parties must submit their responses by November 7, 2026. This effort is specifically structured for subcontractors working under prime contractors to complete the specified facility improvements.

Fws Contracting Activity

POSTED

DEADLINE

Thermal Insulation and Weather-Lagging InstallationThis small business set-aside subcontract involves the installation of thermal insulation and weather-protective lagging for prime contractors at the Naval Undersea Warfare Center in Keyport, Washington. The scope of work requires fitting pre-formed fiberglass or closed-cell elastomeric insulation on 2-inch copper piping, including all associated pumps and valves. Additionally, the contractor must install aluminum all-weather jacketing using silicone sealant and verify the integrity of electrical heat tracing to ensure a fully insulated and weather-lagged piping run. All work must be performed in compliance with 2018 WSEC standards. This opportunity falls under NAICS code 238290 and is managed through the Department of Defense. Interested parties should note the response deadline of November 3, 2026.

Naval Undersea Warfare Center

POSTED

DEADLINE

Category 5 Elevator and Conveyor Safety TestingThis small business set-aside subcontract involves performing Category 5 Five-Year Safety Tests and annual inspections for prime contractors at the USP Atwater facility under the Department of Justice. The scope of work includes conducting full-load and full-speed testing on Thyssen and Pflow hydraulic elevators as well as chain-drive material conveyors. All services must be performed in strict accordance with ASME A17.1, A17.2, and B20.1 standards, along with CCR Title 8 regulations, culminating in the delivery of comprehensive inspection reports. To be eligible for this project, personnel must hold Qualified Elevator Inspector certification and obtain NCIC background clearance. The contract is categorized under NAICS code 238290 and is specifically designated for small businesses. Interested parties should note the response deadline of November 6, 2026, for performance at the Atwater location.

POSTED

DEADLINE

Commercial Door Hardware Installation and IC System ConversionThis subcontract for Commercial Door Hardware Installation and IC System Conversion supports prime contractors on U.S. Fish and Wildlife Service facility projects under the Department of the Interior. The scope of work involves the removal, replacement, and modification of interior and exterior door hardware, including field verification of door types and handing. The contractor is responsible for installing commercial-grade hardware compatible with Best Lock IC systems and adapting frames to ensure full compliance with IBC, ADAAG, and ANSI/BHMA standards. The primary objective is to deliver a secure, fully operational, and code-compliant door hardware system. This opportunity falls under NAICS code 238290 and was posted on October 27, 2026, with a response deadline of November 7, 2026.

Fws Contracting Activity

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

This subcontract opportunity for the city of Festus, Missouri, involves the interior and exterior painting and coating application of water storage tanks. The scope of work requires comprehensive surface preparation and abrasive blasting, with a strict mandate for compliance with SSPC-SP10/NACE standards and the utilization of NACE-certified inspectors to ensure quality control. The project falls under NAICS code 238290 and was posted on January 24, 2025. Interested parties must submit their responses by the deadline of February 25, 2025. Detailed bidding information and submission guidelines are available through the official Festus civic portal.

General Info

Painting and coating water storage tanks for Festus, Missouri. Deadline February 25, 2025.

Agency

Missouri → Festus

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

MO, USA

Set-Aside

NONE

Documents

This scope was carved out of 103.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Water Storage Tank Maintenance & Asset Management Program

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJan 24

subcontract

Response DeadlineFeb 25

Deadline has passed

Submission Closed

02/25/2025, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyMissouri → Festus

ContactsNo contacts available

OfficeN/A

Organization / AgencyMissouri → Festus

Office AddressN/A

ContactsNo contact information available

Full Description

Surface preparation, abrasive blasting, and application of protective coatings to water storage tanks, including compliance with SSPC-SP10/NACE standards and use of NACE-certified inspectors.