Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Water Treatment and Filtration System Supply

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The City of Vacaville in California is seeking a subcontractor for the supply of a water treatment and filtration system. The primary objective of this project is to provide pretreatment or filtration systems designed to ensure that water sourced from Well 22 meets Cr VI compliance standards when blended. This subcontract falls under NAICS code 333318 and will be performed in Vacaville. The project was posted on December 4, 2025, and focuses on critical infrastructure improvements to maintain water quality and regulatory compliance.

General Info

Vacaville seeks a subcontractor for a Cr VI compliant water treatment filtration system.

Agency

California → City of Vacaville

NAICS

333318 - Other Commercial and Service Industry Machinery Manufacturing

Place of Performance

Vacaville, CA

Set-Aside

NONE

Documents

This scope was carved out of 120325-183.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Well 22 Equipping Project

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedDec 4

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → City of Vacaville

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → City of Vacaville

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide filtration or pretreatment systems to ensure water from Well 22 meets Cr VI compliance when blended.

Similar Contracts

Same NAICS industry code

Direct Drive Couplings and Limit SwitchesThis subcontract through the NASA Shared Services Center involves the provision of specialized coupling hardware and electronic limit switches for prime contractors working on facility projects at the NASA Langley Research Center in Hampton. The scope of work focuses on delivering industrial-grade limit switches compatible with existing motor systems and direct drive couplings featuring a 32:1 gear ratio, along with necessary protective shields. Classified under NAICS code 333318, the agreement ensures the delivery of critical mechanical components to support agency infrastructure. The opportunity was posted on October 26, 2026, with a response deadline set for October 28, 2026.

NASA Shared Services Center

POSTED

DEADLINE

in about 10 hours

Supply of Multi-Purpose Vehicular JacksThis subcontract involves the manufacture or procurement of multi-purpose vehicular jacks for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. All provided equipment must strictly adhere to NSN 4910-01-200-0870 specifications and undergo quality inspections in accordance with FAR 52.246-2. Additionally, the contractor is required to provide domestic origin representation and ensure all shipments are palletized following RP001 DLA Packaging Requirements. The project is categorized under NAICS code 333318, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 5, 2026, regarding the solicitation posted on October 25, 2026. The primary objective is the reliable delivery of palletized vehicular jacks that meet all specified federal and agency standards.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Intake Air Cleaner (NSN 2940-01-570-2736)This subcontract involves the manufacture or procurement of one Intake Air Cleaner under NSN 2940-01-570-2736 for the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring the component meets all technical specifications, including compliance with ASTM D3951, MIL-STD-129, and RP001 palletization standards, as well as the DLA Master List of Technical and Quality Requirements. Additionally, the provider must adhere to the Buy American Act and Berry Amendment regulations. The delivery of the completed unit is required FOB Origin, with performance taking place in Texarkana, Texas. Interested parties must submit their responses by November 5, 2026, in accordance with the solicitation posted on October 25, 2026. The contract falls under NAICS code 333318 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Tube Expanders (NSN 3456-01-702-9598)This subcontract involves the manufacture or sourcing of 13 specialized tube expanders matching NSN 3456017029598 to support prime contractors delivering on Department of Defense supply contracts. The selected provider is responsible for ensuring all hardware meets the specific technical specifications for the identified NSN and complies with FAR 52.211-5. The completed units must be packaged and shipped to the DLA Distribution DSP New Cumberland Facility located in New Cumberland, Pennsylvania. This procurement falls under NAICS code 333318, with a response deadline set for November 5, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Bag Filtration System Equipment SupplyThis subcontract for Bag Filtration System Equipment Supply, issued by Port Hueneme Public Works in California, involves the provision of bag filtration systems and related components for prime contractors working on City Desalter Improvement projects. The selected supplier must provide equipment that adheres strictly to project specifications and is required to submit detailed descriptions of the installed equipment along with references from three current users. The scope of work includes the delivery of the filtration system equipment directly to the site, accompanied by certified equipment drawings, comprehensive parts lists, and the manufacturer's operation and maintenance instructions. Interested parties must submit their responses by the deadline of November 17, 2026.

Port Hueneme Public Works

POSTED

DEADLINE

Precision Machined Puller ManufacturingThis subcontract for Precision Machined Puller Manufacturing involves the production and assembly of two Pullers for prime contractors supporting the DLA Weapons Support ASC. The scope of work requires precision machining of components and the assembly of the puller mechanism using CNC machining centers and precision grinding equipment. All work must adhere to the DLA Master List of Technical and Quality Requirements, with specific compliance required for RA001 and quality assurance standards per MIL-STD-1916 or ASQ H1331. The project is managed under NAICS code 333318 for the Department of Defense and will be performed in New Cumberland. The final deliverable consists of two completed and tested Pullers. Interested parties must note the response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Intake Air Cleaner Filter ElementsThis subcontract involves the procurement of 2,000 intake air cleaner filter elements to support prime contractors on DLA Weapons Support Maritime Supply Chain projects. The selected provider is responsible for manufacturing or sourcing filter elements that strictly adhere to NSN 4310015236643 specifications. All units must be marked according to MIL-STD-129 and packaged and palletized in compliance with MIL-STD-2073-1E and RP001 standards. The contract requires full compliance with the Buy American Act as outlined in DFARS 252.225-7001. Final delivery of the 2,000 packaged elements is to be made to DLA Distribution San Joaquin in Tracy, California. This effort falls under NAICS code 333318 and is managed under the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Precision Optical Lens Fabrication (NSN 6650-01-577-4445)This subcontract involves the fabrication of high-precision optical instrument lenses under NSN 6650-01-577-4445 for prime contractors supporting the Defense Logistics Agency. The manufacturer is required to produce the lenses in strict accordance with Drawing 7641866 and MIL-PRF-13830B surface quality standards. Key deliverables include the completed warranted lenses, the successful execution of a First Article Test, and adherence to MIL-STD-2073-1E and MIL-STD-129 for all packaging and marking requirements. The project is categorized under NAICS code 333318 and will be performed in Anniston. Due to the nature of the equipment, the contractor must maintain ITAR and EAR compliance and hold US/Canada Joint Certification Program certification. Interested parties must respond by November 2, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Hand-Operated Drum Winch Assembly ProductionThis subcontract involves the manufacture and assembly of 15,000 complete hand-operated drum winch assemblies for prime contractors supporting Department of Defense DLA supply contracts. Production must strictly adhere to Drawing NR 19207 12461890 Rev B and 19207 1244028 Rev E, with a specific prohibition against the use of additive manufacturing. Quality assurance sampling must be performed according to MIL-STD-1916 or ASQ H1331, while packaging and marking must comply with ASTM D3951, RP001, and MIL-STD-129. The work is associated with NAICS code 333318 and is to be performed in New Cumberland, Pennsylvania.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Intake Air Cleaner Filter Element ManufacturerThis HUBZone set-aside subcontract involves the manufacture of 208 intake air cleaner filter elements for prime contractors supporting the DLA Weapons Support Strategic Acquisition Program Directorate. The contractor is responsible for fabricating elements according to NSN 2940015324369 and the DLA Master List of Technical and Quality Requirements, while ensuring all sampling and validation processes adhere to MIL-STD-1916 or ASQ H1331 standards. The project requires strict compliance with the Buy American Act and the Berry Amendment. This procurement falls under NAICS code 333318 and is managed by the Department of Defense. Interested parties must respond by November 4, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Vehicular Door Check Rod SupplierThis subcontract involves the manufacture or sourcing of eight vehicular door check rods, identified by NSN 7018663639, for prime contractors supporting DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt, with performance taking place in Tracy, California. The supplier must ensure all items are packaged according to ASTM D3951 and marked in compliance with MIL-STD-129, while strictly adhering to the DLA Master List of Technical and Quality Requirements. The solicitation was posted on October 18, 2026, with a response deadline of October 29, 2026, falling under NAICS code 333318.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Riding Turf Sweeper Manufacturer/SupplierThis subcontract agreement involves the procurement of an industrial-grade riding turf sweeper for the City of Burnaby. The selected manufacturer or supplier is responsible for sourcing or producing one fully operational unit that adheres to all provided technical specifications. To ensure long-term maintenance and compatibility, the supplier must provide original equipment manufacturer part numbers for all components included with the machinery. The opportunity is open for responses until November 4, 2026. The successful contractor will work as a subcontractor to prime contractors managing municipal equipment projects for the City of Burnaby, ensuring the final delivery of a high-performance sweeper tailored to the city's operational requirements.

City of Burnaby

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Laboratory Casework and Specialized Equipment

Unc - System Office Design/construction

POSTED

CLOSED

Supply of Replacement Disc Filter Panels (Asymmetrical Gasket Configuration)

POSTED

CLOSED

Supply of Replacement Disc Filter Panels (Symmetrical Gasket Configuration)

POSTED

CLOSED

Water Treatment System Integration

City of Vacaville

POSTED

DEADLINE

Vending Machine Supply and Installation

Jefferson County

POSTED

CLOSED

Propane-Fired Crematory Retort Supply and Installation

Bay Area Air Quality Management District

POSTED

DEADLINE

Commercial Kitchen Equipment Supply

POSTED

CLOSED

Vending Machine Supply and Equipment Procurement

Texas A&M University – Texarkana

POSTED

CLOSED

CDFW Compliant Fish Screen Installation/Supply

Fish and Wildlife, Region 1 - Northern Region, Redding and Eureka

POSTED

DEADLINE

Hard Drive Shredder Supply and Configuration

Texas A&M University

POSTED

CLOSED

Semi-Hermetic Refrigeration Training Simulator Supply

Midlands Technical College

POSTED

CLOSED

Hard Drive Shredder Supply and Delivery

Texas A&M University

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS