Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

WBFLS 14 CH PWR AMP

Active

SPRMM1-26-Q-HC56Federal

Response Deadline10/15/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits proposals for the supply of three units of the WBFLS 14 Channel Power Amplifier, identified under requirement 7EH 5996 017090928. This solicitation, issued by the Department of Defense through the DLA Mechanicsburg office, is listed under the NAICS code 335999, which pertains to electrical equipment manufacturing. The solicitation number is SPRMM1-26-Q-HC56, and the posting date was April 17, 2026, with a response deadline set for July 2, 2026. No set-aside provisions are applied to this procurement. The office responsible for the contract is located in Mechanicsburg, Pennsylvania. The points of contact for this solicitation include Joshua Ginsburg and Nicholas Peters, who can be reached via email and phone for further inquiries. The solicitation pertains to a specialized electrical component intended for defense use, emphasizing the need for compliance with Department of Defense standards and timely submission by interested vendors.

General Info

Supply of three WBFLS 14 Channel Power Amplifiers for DoD, deadline July 2, 2026.

Agency

Department Of Defense → SPRMM1 DLA MechanicsburgView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

PA, USA

Set-Aside

NONE

Documents

(1)

RFQ SPRMM1-26-Q-HC56 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update

PhaseSolicitation

PostedApr 17

Solicitation

Amendment 1Aug 18

Contract was updated

Response DeadlineOct 15

Submission deadline

Response Deadline

10/15/2026, 08:30:00 PM UTCin about 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

Contacts2 people available

OfficeMECHANICSBURG, PA, 17055-0788, USA

Organization / Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

View Agency Profile

Office AddressMECHANICSBURG, PA, 17055-0788, USA

Contacts

JOSHUA GINSBURG

contact@example.gov

+1 (555) 000-0000

Electronic Mail

contact@example.gov

Full Description

Show more

This requirement is for 7EH 5996 017090928; WBFLS 14 CH PWR AMP; 3 units.

Similar Contracts

Same NAICS industry code

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-19SY

This contract is for the procurement of six rolls of black electrical insulation tape, identified as a commercial off the shelf item. The specified product is 3M Scotch 33, featuring a width of two inches and a length of 108 feet per roll. This is designated as a critical application item with a non-extendable shelf life of 18 months. The order is managed under solicitation SPE4A6-26-T-19SY with a delivery requirement of 20 days after the order date. Delivery is set as FOB Origin, and both inspection and acceptance will occur at the origin. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. A hazardous material review has determined the item is not hazardous, and no safety data sheet package is required for procurement.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-674C

This contract is for the procurement of 24 ground rods under solicitation SPE4A7-26-T-674C for the Department of Defense. The items must consist of three 3-foot sections with a length tolerance of plus or minus 3/8 of an inch, including driving studs and couplings. Specific technical exceptions require that the clamp, grounding cable, and grounding terminal lug all accommodate 1/0 ground cable instead of the standard number 6 bare stranded copper wire. The order is governed by DLA packaging requirements and technical standards, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Delivery is set for 171 days after order, with a required delivery date of August 31, 2027, shipped FOB Origin to DLA Distribution Cherry Point in North Carolina. All packaging must comply with MIL-STD-129 and RP001, with specific instructions for hazardous or commercial packaging based on FED-STD-313 and ASTM D3951.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-19EF

This contract, identified as solicitation SPE4A6-26-T-19EF, is for the procurement of 122 units of stud terminals, specifically part number 10S204-14 from Northrop Grumman Systems Corporation. The order is managed by the Department of Defense ASC Commodities Division with a required delivery date of May 13, 2029, and a delivery timeframe of 171 days after order. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, physical identification, and measuring and test equipment. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling methods must follow MIL-STD-1916 or ASQ H1331. Additionally, the contract requires compliance with Covered Defense Information protocols and CMMC Level 2 self-assessment for cybersecurity.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE4A7-26-T-673L

This contract is a solicitation from the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, for the procurement of 408 safety shorting probes under part number 0001S00000053. The delivery requirement is set for 518 days after the order is received. The solicitation, identified as SPE4A7-26-T-673L, was posted on August 18, 2026, with a response deadline of August 26, 2026. The agreement is subject to strict technical and quality requirements, including DLA packaging standards and rigorous export controls. Because the technical data is subject to ITAR and EAR regulations, it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

INSULATION SLEEVING

Solicitation # SPE4A6-26-T-19NT

This contract is for the procurement of 171 units of insulation sleeving, identified by NSN 5970-01-513-2491 and part number BSFP500 from Jo-Kell Inc. The agreement is managed by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-19NT. Delivery is required within 171 days, with a need ship date of February 14, 2027, and a destination of DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging, marking, and shipping requirements, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with zero non-conformance required for acceptance. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE4A7-26-T-675D

This solicitation by the Department of Defense ASC Supplier OE and AF Div is for the procurement of two rigid metal conduit assemblies under solicitation number SPE4A7-26-T-675D. The contract specifies a delivery timeline of 381 days after the order is placed and identifies the place of performance in New Cumberland. The agreement is subject to strict regulatory requirements, including DLA packaging standards and higher level quality requirements for both manufacturers and non-manufacturers. Notably, the contract involves the handling of covered defense information and technical data subject to ITAR and EAR export controls. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification and completed Department of Defense export-controlled technical data training.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7L7-26-T-4830

Defense Logistics Agency

POSTED

DEADLINE

CONDUIT ASSEMBLY, METAL

Solicitation # SPE4A7-26-T-674H

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

CHARGER, BATTERY

Solicitation # SPE7LX-26-U-9596

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

PRODUCTION LOT TESTING

Solicitation # SPE4A6-26-T-19KX

ASC COMMODITIES DIVISION

POSTED

DEADLINE

LAMP, LIGHT EMITTING

Solicitation # SPE4A6-26-T-19SW

ASC COMMODITIES DIVISION

POSTED

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE4A7-26-T-673F

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

FUSE BLK/EMI A11

Solicitation # SPRMM126QKE51

This contract is for the supply of FUSE BLK/EMI A11 under solicitation SPRMM126QKE51, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with a response deadline of July 31, 2026. The award will be made using the Lowest Price Technically Acceptable (LPTA) evaluation method, emphasizing cost efficiency while meeting all technical and quality requirements. The contractor must adhere to MIL-STD-130 Revision N for item marking and comply with all specified packaging standards per MIL-STD-2073. Inspection and acceptance will occur at the source and at the final destination, with the contractor fully responsible for ensuring compliance throughout manufacturing and delivery. All items must originate from the authorized manufacturer with CAGE code 53711 and reference number 7104335-9, and any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, accompanied by justification and documentation. The contractor must also maintain complete inspection records for 365 days after final delivery. The contract mandates electronic submission of invoices and receiving reports via Wide Area Workflow (WAWF), and all communications, including order notifications, must be coordinated through the Procurement Integrated Enterprise Environment (PIEE) and Electronic Data Access (EDA) portals. Contractors are required to register on PIEE and provide accurate contact information, including an email address for follow-up. Only authorized distributors of the original manufacturer may submit offers, and proof of authorization must accompany proposals. Security and supply chain restrictions apply under the Federal Acquisition Supply Chain Security Act and a February 2026 class deviation, prohibiting certain foreign-origin components. Additionally, all documents provided by the Navy include distribution statements indicating their handling and dissemination limitations, with specific protocols for accessing controlled documents such as NOFORN or Official Use Only materials. The government retains the right to inspect at any time, and failure to meet specifications will result in rejection without liability.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

PILOT VALVE ASSY

Solicitation # SPRMM126QKF84

This solicitation, issued by the Defense Logistics Agency (DLA) Mechanicsburg under solicitation number SPRMM126QKF84, seeks the manufacture and delivery of a PILOT VALVE ASSY, with all contractual obligations governed by stringent quality, inspection, and compliance requirements. The contract mandates adherence to MIL-STD-130 Rev N for part marking, prohibits any mercury or mercury contamination in materials due to the sensitive naval applications, and requires strict control over design changes through a defined code system, with only Code 1 changes permitted without formal approval. All items must be sourced from authorized distributors with documented proof of authorization, and contractors must comply with the mandatory use of WAWF for electronic invoice and receiving report submissions. Inspection is to occur at source, and the government retains the right to inspect and reject non-conforming materials at any time, with records of all quality assurance activities retained for 365 days after final delivery. The contract is subject to the Lowest Price Technically Acceptable evaluation method and issued under Emergency Acquisition Flexibilities authority, indicating urgency and constrained procurement pathways. The contractor must be registered in the PIEE EDA system to view orders and modifications, and all communications must be directed to the designated primary point of contact, with mandatory inclusion of the CAGE code 99517 and part number 12052302-1. Subcontractors are bound by the same mercury-free and quality assurance clauses, and any proposed changes to production facilities require written approval and a $250 administrative cost reduction. Compliance with the CMMC Level 1 self-assessment certification and the Small Business Program Representations under NAICS code 332919 is required, alongside adherence to all specified packaging standards under MIL-STD-2073. The solicitation emphasizes electronic submission, with exceptions to solicitation terms requiring immediate follow-up documentation; failure to disclose deviations may result in award based strictly on original requirements, with cost deductions applied for post-award changes. Contractors are also directed to register for automated notifications through NAVSUP WSS to track contract issuances and ensure timely compliance with all procedural and technical obligations.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

PUMP UNIT,CENTRIFUG

Solicitation # SPRMM126QMG40

This contract is for the procurement of a centrifugal pump unit under a firm fixed-price structure, issued by the Defense Logistics Agency (DLA) Weapons Support Mechanicsburg through solicitation SPRMM126QMG40. The requirement is procured under non-commercial item procedures leveraging FAR 12.001(b) and evaluated using the Lowest Price Technically Acceptable (LPTA) method. The product must conform to specified military standards including MIL-STD-130 Rev N for marking, MIL-STD-2073 for packaging, and the designated Cage Code 96046 with reference number 777H440 4T958. All substitutions or design changes require prior written approval from the Contracting Officer and must be classified under one of six defined code categories, with full documentation including drawings and justifications submitted for review. The contractor is responsible for all inspection, quality assurance, and recordkeeping, with records retained for 365 days after final delivery. Inspection and acceptance occur at the source, and final packaging and acceptance are subject to government oversight. The contract requires electronic submission of invoices and receiving reports via WAWF, and compliance with mandatory use of Workflow Pro and Wide Area Workflow Payment Instructions. Offerors must be authorized distributors of the original equipment manufacturer and provide proof of authorization on company letterhead. The solicitation mandates disclosure of OEM CAGE codes and part numbers if not the manufacturer, and requires inclusion of an email for communications. All contractual documents are deemed issued upon electronic transmission. The contract includes clauses on liquidated damages, stop-work orders, security prohibitions, and equal opportunity for veterans and workers with disabilities, with small business representations and annual certifications required. Delivery terms, validity period, and place of performance are pending specification. Distribution of technical data is governed by specific classification codes under OPNAVINST 5510.1, with NOFORN and Official Use Only documents requiring formal government certification. Contractors are advised to register for the PIEE Electronic Data Access portal to monitor order status and receive automated notifications.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

TRANSMITTER,PRESSUR

Solicitation # SPRMM126QKH29

This solicitation is for the manufacture and supply of pressure transmitters, specifically identifying parts PWT-SW-150-G2 and 89PWTSW150G2. The contract will be awarded based on the Lowest Price Technically Acceptable criteria. Requirements include strict adherence to MIL-STD-130 for marking and MIL-STD 2073 for packaging. Contractors must provide proof of being an authorized distributor if they are not the original equipment manufacturer, and refurbished materials are explicitly prohibited. Key administrative requirements include the use of the PIEE-WAWF system for electronic invoicing and receiving reports, and compliance with CMMC Level 1 self-certification. All contractual documents are considered issued upon electronic transmission. Any changes to production facilities require written approval from the Contracting Officer and a 250 dollar administrative fee. Inspection and acceptance are conducted at the source, and the contractor is responsible for maintaining all inspection records for 365 days following final delivery.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

ACTUATOR,DOGGING,PO

Solicitation # SPRMM126QMH55

This solicitation, issued by DLA Mechanicsburg, seeks the manufacture and supply of a dogging actuator. Award evaluations will be based on the Lowest Price Technically Acceptable criteria. The contractor must adhere to ISO 9001 quality system requirements and ensure all items are physically identified per MIL-STD-129. A critical requirement is that the material must be mercury-free, as it is intended for use on submarines or surface ships, and any contamination may result in the rejection of the supplies. The contract mandates the use of the PIEE-WAWF system for the electronic submission of invoices and receiving reports. If the supplier is not the original equipment manufacturer, they must provide the OEM's CAGE code and part number. Additionally, any changes to production facilities require written approval from the Contracting Officer and a price reduction of 250 dollars to cover administrative costs. The solicitation emphasizes that only authorized distributors of the original manufacturer will be considered for the award.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

KITE,24V,CONSOLE

Solicitation # SPRMM126QGC55

The contract pertains to the procurement of a KITE, 24V, CONSOLE under solicitation SPRMM126QGC55, issued by the Department of Defense through DLA Mechanicsburg. All offerings must strictly adhere to the approved Cage Code 11447 and reference number K10048482-522, with no substitutions permitted without prior written approval from the NAVICP-MECH Contracting Officer. Changes to design, material, or part number must be classified under one of six defined code categories and substantiated with drawings and justifications. The item must comply with MIL-STD-130 Rev N for marking and MIL-STD-2073 for packaging, with inspection and acceptance required at the source. Refurbished materials are explicitly unacceptable. The evaluation will follow the Lowest Price Technically Acceptable (LPTA) method, prioritizing cost efficiency among technically compliant offers. Only authorized distributors of the original manufacturer may submit proposals, requiring written proof of authorization. All contractual documentation is considered issued upon electronic transmission or mail delivery, and contractors must use the PIEE-WAWF system to submit invoices and receiving reports electronically. Compliance with the Buy American Act, Federal Trade Agreements, and the Balance of Payments Program is mandatory, along with adherence to Security Prohibitions and Exclusions under Class Deviation 2026-O0025. Contractors must use Workflow Pro’s Assist Module and follow Wide Area Workflow Payment Instructions. The item is not to be accompanied by technical drawings, and if a distributor rather than manufacturer, the OEM’s CAGE code and part number must be disclosed. Contractual records must be retained for 365 days post-delivery, and all submissions require a valid email for communication. Contractors are strongly encouraged to register for Electronic Document Access (EDA) via PIEE to monitor contract updates. Distribution of any Navy-provided documents is restricted under specific codes according to OPNAVINST 5510.1, and requests for restricted materials must be formally certified. Offers must respond by July 27, 2026, and FOB Origin terms apply with no exceptions.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

in about 2 months

VIDEO PROCESSING AS

Solicitation # SPRMM126QHE64

Other Communications Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

MODEM,COMMUNICATION

Solicitation # SPRMM126QKH03

Other Communications Equipment Manufacturing

POSTED

DEADLINE

SUPERCHARGER,ENGINE

Solicitation # SPRMM126QKH30

Other Engine Equipment Manufacturing

POSTED

DEADLINE

48--VALVE,LINEAR,DIRECT

Solicitation # SPRMM126QKF96

The Government is seeking sources for a Valve, Linear, Direct with National Stock Number 7HH 4820 016109907 and part number 3798354-4, exclusively sourced from Sargent Aerospace & Defense LLC (CAGE 78062), as the approved design manufacturer. The Government does not own the data or intellectual property rights necessary to procure this part from alternative sources and has determined it is uneconomical to acquire the data or reverse engineer the component. This action is being pursued under FAR 6.302-1 as a sole source procurement, based on market research indicating no viable competitive alternatives exist. Although this is not a formal solicitation, the Government is conducting a sources sought notice to identify any other capable vendors who may be able to meet the requirement, particularly with commercial items, and to confirm the necessity of the sole source approach. Responses must be submitted via email to Jennifer Elliott at DLA Mechanicsburg by the stated deadline, and all non-OEM vendors must provide full traceability of materials back to the original manufacturer; failure to do so will result in a non-responsive submission. The contract will be delivered FOB origin, and while no inspection, packaging, or evaluation criteria are specified in this notice, potential Offerors must indicate their ability to submit certified cost or pricing data for contracts exceeding $10 million if applicable, along with details on company size, parent organization, and manufacturer affiliations. All relevant military and federal specifications can be accessed via ASSIST-Online or DODSSP, though drawings, patterns, and deviation lists are not available through these channels. The proposed contract is not subject to commercial item acquisition policies under FAR Part 12, though vendors may still declare commercial item capability within 15 days of notice publication.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

in about 1 month

ENCODER-DECODER,COM

Solicitation # SPRMM126QKG05

The contract pertains to the procurement of an ENCODER-DECODER,COM under solicitation SPRMM126QKG05, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with a response deadline of July 27, 2026. Award will be made using the Lowest Price Technically Acceptable (LPTA) method, requiring full compliance with all technical and quality specifications, including adherence to MIL-STD-130 Rev N for marking, and strict prohibition of mercury contamination due to the item’s intended use in submarine and surface ship systems. The contractor must provide the CAGE code and reference number for the exact part, with no substitutions allowed without prior written approval and code classification, and must include detailed quantity price breaks in their quote. All deliveries must meet inspection requirements at source as defined in DLA Procurement Note E06, with final acceptance to occur at a designated location, and packaging must comply with MIL-STD-2073. The contractor is required to submit invoices and receiving reports electronically through WAWF, register for the PIEE EDA portal to track orders, and comply with CMMC Level 1 self-assessment and cybersecurity prohibitions outlined in recent Deviations. Small business representation is mandated under NAICS 334290 with a maximum of 800 employees, and all subcontractors are bound by the same mercury-free and quality assurance requirements. Only authorized distributors may submit offers, requiring documentation of manufacturer authorization, and all technical data is subject to distribution statement controls as per OPNAVINST 5510.1. The contract prohibits changes to production facilities without a cost reduction of $250 and explicit approval, and all inspection records must be retained for one year after final delivery. Communication via email is critical for all follow-up actions, and vendors are strongly encouraged to enroll with NAVSUP WSS for automated notifications about contract issuances.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

TRANSDUCER,DIFFEREN

Solicitation # SPRMM126QHE63

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE