This Solicitation opportunity from Department Of Defense was posted on May 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
WEBBING, TEXTILE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract solicitation SPE1C1-26-T-1149 seeks 3,000 yards of textile webbing identified by NSN 8305-00-270-1869 and part number PIA-W-5664, manufactured in accordance with the Parachute Industry Association specification PIA-W-5664C dated May 11, 2016. The webbing is a narrow, elastic fiber product composed of cotton, with a maximum weight of 0.73 ounces per linear yard, thickness between 0.016 and 0.046 inches, and a width of 1 inch plus or minus 0.06 inches. It is supplied on fiberboard spools containing 120 to 130 yards per roll, with no individual piece shorter than 2 yards, and must be labeled for fiber content in compliance with the Textile Fiber Products Identification Act. Each roll must also bear a tag identifying the specification, lot number, and date of manufacture, defined as the date of the final manufacturing process affecting its physical properties. All product lots require test reports or a Certificate of Compliance if the contract value is under $100,000, subject to approval by the Contracting Officer. The source of all component materials must be identified and cannot be altered without formal contract modification. Packaging must meet strict DLA and Department of Defense standards: each roll must be individually bagged, with intermediate and exterior containers conforming to MIL-STD-2073-1E and ASTM D5118M, respectively. Exterior boxes must be double-wall corrugated fiberboard, palletized with four-way entry pallets under MIL-STD-147E, and secured with approved commercial bonding materials. All packaging must be preserved using Method 10 – Clean and Dry, and fully labeled per MIL-STD-129R with lot number, NSN, contract number, and shipment identifier using pressure-sensitive labels in contrasting, permanent ink. Bar-coding using Data Matrix or linear codes is mandatory for DoD logistics tracking. Wood packaging materials must comply with ISPM 15 and bear an ALSC-approved HT or KD-HT mark. Testing must occur at ISO 17025-accredited laboratories approved by DLA, with the contractor responsible for identifying and certifying all test sites, including providing points of contact and ensuring testing
General Info
Agency
Contract Value
$5,700NAICS
Place of Performance
515 N 51ST AVENUE NUMBER 130 DOCK 1, PHOENIX, AZ, 85043, USASet-Aside
Awardee
Award Issued Date
Timeline
Submission Closed
Organization & Contact Information
Full Description
WEBBING,TEXTILE
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
INDIVIDUAL NSN DATA
.
NSN 8305-00-270-1869, PGC11835
.
ITEM NAME: ,,WEBBING, TEXTILE
PART NUMBER: ,,PIA-W-5664
CAGE CODE: ,,1HHQ4; PARACHUTE INDUSTRY ASSOCIATION, INC.
.
Shall be in accordance with (IAW) Parachute Industry Association PIA-W-5664C, WEBBING, TEXTILE, ELASTIC dated 11 May 2016. . Intended for use are as follows: Headbands for aviators' face masks and goggles, parachute packs and harnesses, service cap covers, gloves, waist bands, and for harness elastic on gas masks face pieces. . Design Type: Flat Weight: 0.73 ounces per linear yard maximum Features provided: Elastic strand Fiber material: Cotton Color: Natural Procurement Group Code (PGC): 11835 Thickness: 0.016 inches minimum to 0.046 inches maximum Width: 1 inch ± 0.06 inches (1/16); 0.94 inches minimum to 1.06 inches maximum Type: I (Cotton fiber) Class: 1 Length: Shall be furnished on fiberboard spools containing 120 to 130 yards with no more than 6 pieces per roll. No piece shall be less than 2 yards in length. . Unit of issue is a YARD (YD). . Weave construction: The weave for all Types and Classes may be supplied in either shuttle or shuttleless loom construction, except for Type I, Class 4, which shall be manufactured on a shuttleless loom. . The unit of issue is a Yard (YD). . Each roll or spool of webbing shall be labeled or ticketed for fiber content in accordance with the Rules and Regulations under the Textile
SPE1C1-26-T-1149
SECTION B
Fiber Products Identification Act. . The textile manufacturer shall properly identify the age of the textile materials by placing a tag on the finished goods or label on the containers identifying the specification to which the material is manufactured, the lot number and the date of manufacture. The date of manufacture is defined as the date (month and year) of the last manufacturing process that affects the physical characteristics of the material. . TEST REPORTS AND COMPONENT CERTIFICATIONS IN ACCORDANCE WITH Revision 1 of the DLA TROOP SUPPORT CLOTHING & TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREMENTS dated August 2021 ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS. . Please note a Certificate of Compliance (CoC) may be submitted in lieu of physical testing and the certified test reports, provided the total cost of the contract does not exceed $100,000 (per page 14/45 of the DLA Troop Support Additional Quality Assurance Requirements dated August 2021)
Please note, however, use of the CoC in lieu of submitting the certified test reports, is subject to approval by the Contracting Officer identified on the solicitation, purchase order, and/or the contract. . SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED<(>,<)> INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP SUPPORT CONTRACTING OFFICER THROUGH MODIFICATION TO THE CONTRACT.
RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS RESPONSIBLE FOR THE PERFORMANCE OF ALL INSPECTION<(>,<)> EXAMINATION, AND TEST REQUIREMENTS SPECIFIED HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT. THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS DEEMED NECESSARY TO ENSURE SUPPLIES AND SERVICES CONFORM TO PRESCRIBED REQUIREMENTS. . RT001: MEASURING AND TEST EQUIPMENT
.
LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS
a. This solicitation/award consists of the following documents, exhibits, and other attachments b. DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements Revision 1 dated August 2021, which has superseded DLA Troop Support Clothing and Textiles Additional Quality Assurance Requirements dated October 2018. . 52.246-15 CERTIFICATE OF CONFORMANCE
Identification of Testing Sites. Unless the contract mandates a Government laboratory be used to conduct testing, the prime contractor shall identify all testing sites that will perform any test required by the terms of the contract, including end item testing.
Any laboratory proposed by the contractor is subject to the approval of the contracting officer. Testing facilities shall be subject to on-site witnessing of testing by the Government. The use of a laboratory previously approved by the Government is not a guarantee that testing will be performed properly, nor does it relieve a contractor from the contractual obligation to present conforming supplies accompanied by true, accurate, and valid test results.
SPE1C1-26-T-1149
SECTION B
Certification of Testing Sites. The prime contractor shall identify a technical point of contact for the testing site and provide current contact information. The prime contractor should alert the technical point of contact that the certification process has begun. A current ISO 17025 accreditation whose scope encompasses the contractual testing or equivalent will be accepted. When a testing site and its contact information are provided to DLA Contracting and the DLA Product Specialist, the product specialist will initiate a request for the DLA Product Test Center (DLA-PTC) to certify the lab. This request will be managed via an internal DLA Troop Support process.
In the absence of an appropriate ISO 17025 accreditation, the DLA-PTC will compare all required testing in the contract to the commercial lab capability. If the testing facility is new and/or unknown to the DLA-PTC, a lab certification survey (DLA Form 6005) will be provided for submission.
If the DLA-PTC has a lab survey on file that is less than 3 years old, that survey will be used for the initial NSN/Part Number: 8305-00-270-1869 Quantity: 3,000 YD Purchase Request: 7016793194QTY: 3000 Delivery: 80 days ADO
More opportunities from Department Of Defense → C AND T SUPPLY CHAIN
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS