WEBBING, TEXTILE

WEBBING,TEXTILE
WEBBING, TEXTILE
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
INDIVIDUAL NSN DATA
.
NSN 8305-00-242-6323; PGC11039
.
ITEM NAME: ,,WEBBING, TEXTILE
PART NUMBER: ,,MIL-DTL-4088
CAGE CODE: ,,81349
.
Shall be in accordance with (IAW) Detailed Specification MIL-DTL-4088L, WEBBING, TEXTILE, WOVEN NYLON dated 1 April 2021. . The webbing is for use in the manufacturing of military tentage, clothing and equipage items used by the Department of Defense. . Cloth Name: Plain Weave Design Type: Flat Weight: 1.50 ounces per linear yard maximum Breaking strength: 4,500 pounds minimum Fiber material: Nylon Color: Natural Procurement Group Code (PGC): 11039 Thickness: 0.080 inches minimum to 0.125 inches maximum Width: 1.00 inch ± 0.06 (1/16) inches; 0.94 inches minimum to 1.06 inches maximum Type: XXV (25) Class: Not identified during provisioning of the NSN. Class reference. When procurement documents referencing this specification do not specify the class of webbing<(>,<)> any class in paragraph 1.2 of MIL-DTL-4088L may be used. See below descriptions of each class: Class 1 Shuttle loom, nylon 6,6 Class 1A Shuttleless loom, nylon 6,6 Class 2 Shuttle or shuttleless loom, nylon 6 or nylon 6,6 Roll Length: 90 yards minimum to 110 yards maximum Special features: Environmental Protection: Abrasion resistant, class R (resin), treated in accordance with PIA-W-27265 Departure from cited designator:,,As modified by Special Features . The unit of issue is a Yard (YD). . Each roll of the finished webbing shall be labeled or ticketed for
SPE1C1-26-T-0906
SECTION B
fiber content in accordance with the Rules and Regulation Under the Textile Fiber Products Identification Act. . Identification tickets. Each roll or spool shall have a ticket attached with not finer than 5-ply cotton string doubled to not less than 6 inches long. The tickets shall be made of paperboard not less than 0.015 inch in thickness and the color shall be manila or light in intensity to permit easy reading of printed, stamped or typed markings. The use of handwritten entries is prohibited. The ticket shall have clipped corners at the end where a reinforcing patch (with or without a metal eyelet) is firmly affixed for attaching the tying string. The ticket shall be legibly printed with water insoluble ink with the following information: -Stock number -Nomenclature -Specification number -Yardage -Contract number and date of manufacture (month and year) -Contractor's name -Name of contracting agency. . Each roll or spool of webbing shall be labeled or ticketed for fiber content in accordance with the Rules and Regulations under the Textile Fiber Products Identification Act. . TEST REPORTS AND COMPONENT CERTIFICATIONS IN ACCORDANCE WITH DLA TROOP SUPPORT CLOTHING & TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREMENTS, Revision 1 dated 1 August 2021 (superseding DPSCM-4155.3 dated 3 November 1997) ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS. In lieu of the abovenamed requirement, if the total contract award does NOT exceed $100,000, the contract awardee may submit a Certificate of Conformance (CoC) per 3.1.3 of the DLA Troop Support Clothing and Textiles (C<(>&<)>T) Additional Quality Assurance Requirements (AQAR), Revision 1 dated August 2021. . SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED<(>,<)> INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP SUPPORT CONTRACTING OFFICER THROUGH MODIFICATION TO THE CONTRACT.
RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS RESPONSIBLE FOR THE PERFORMANCE OF ALL INSPECTION<(>,<)> EXAMINATION, AND TEST REQUIREMENTS SPECIFIED HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT. THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS DEEMED NECESSARY TO ENSURE SUPPLIES AND SERVICES CONFORM TO PRESCRIBED REQUIREMENTS. . RT001: MEASURING AND TEST EQUIPMENT
.
52.246-15 CERTIFICATE OF CONFORMANCE
.
GOVERNMENT LABORATORY TESTING OF COMPONENTS FOR ACCEPTANCE PURPOSE
FOR PHYSICAL (NON-SHADE) TESTING:
Only applicable if the total contract award exceeds $100,000
In lieu of the abovenamed requirement, if the total contract award does NOT exceed $100,000, the contract awardee may submit a Certificate of Conformance (CoC) per 3.1.3 of the DLA Troop Support Clothing and Textiles (C<(>&<)>T) Additional Quality Assurance Requirements (AQAR), Revision 1 dated August 2021. . THE VENDOR SHALL NOTIFY THE DLA Product Test Center -Analytical FOURTEEN (14) CALENDAR DAYS TO THIRTY (30) CALENDAR DAYS IN ADVANCE OF
SPE1C1-26-T-0906
SECTION B
WHEN LOTS ARE TO BE PRESENTED FOR SAMPLING AT THE ADDRESS BELOW.
THE CONTRACTOR'S APPROVED QUALIFIED LABORATORY WILL BE REQUIRED TO
FORWARD A COMPLETED TEST REPORT FOR EACH LOT OF COMPONENTS TO THE
ADDRESS BELOW. THE SUPPLIER'S SOURCE SAMPLING REPRESENTATIVE WILL
PROVIDE THE COMPLETED DD FORM 1222 dated March 2021 TO THE LABORATORY TO BE SUBMITTED WITH THE COMPLETED TEST REPORT. TEST REPORTS SHALL NOT BE OLDER THAN NINETY (90) CALENDAR DAYS.
LOT NOTIFICATIONS AND SOURCE SAMPLING DD1222s/TEST REPORTS SHALL BE FORWARDED TO: paactlab@dla.mil
SAMPLES FOR PHYSICAL TESTING WILL ONLY BE FORWARDED UPON REQUEST TO: DLA Product Test Center -Analytical 700 Robbins Avenue, BLDG 5D Philadelphia, PA 19111 EMAIL: paactlab@dla.mil
NOTE: PERMIT 45 CALENDAR DAYS . Identification of Testing Sites. Unless the contract mandates a Government laboratory be used to conduct testing, the prime contractor shall identify all testing sites that will perform any test required by the terms of the contract, including end item testing. Any laboratory proposed by the contractor is subject to the approval of the contracting officer. Testing facilities shall be subject to on-site witnessing of testing by the Government. The use of a laboratory previously approved by the Government is not a guarantee that testing will be performed properly, nor does it relieve a contractor from the contractual obligation to present conforming supplies accompanied by true, accurate, and valid test results.
Certification of Testing Sites. The prime contractor shall identify a technical point of contact for the testing site and provide current contact information. The prime contractor should alert the technical point of contact that the certification process has begun. A current ISO 17025 accreditation whose scope encompasses the contractual testing or equivalent will be accepted. When a testing site and its contact information are provided to DLA Contracting and the DLA Product Specialist, the product specialist will initiate a request for the DLA Product Test Center (DLA-PTC) to certify the lab. This request will be managed via an internal DLA Troop Support process.
In the absence of an appropriate ISO 17025 accreditation, the DLA-PTC will compare all required testing in the contract to the commercial lab capability. If the testing facility is new and/or unknown to the DLA-PTC, a lab certification survey (DLA Form 6005) will be provided for submission.
If the DLA-PTC has a lab survey on file that is less than 3 years old, that survey will be used for the initial NSN/Part Number: 8305-00-242-6323 Quantity: 101 YD Purchase Request: 7016243535QTY: 101 Delivery: 20 days ADO