This Solicitation opportunity from Arizona was posted on January 8, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Well Drilling Service

Closed

2020-44State & Local

Submission Closed02/05/2020, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 213111

New

SLED

Drilling and Boring ServicesThis subcontract for Drilling and Boring Services involves performing specialized drilling operations for prime contractors on Department for Natural Resources projects. The primary objective is to extinguish underground mine and gob pile fires by installing twenty-two 6-inch diameter borings using air rotary methods. The contractor is responsible for the delivery of completed borings and the backfilling of holes as directed by the engineer. All work must be performed in Radcliff, Kentucky, and must comply with the Kentucky Transportation Cabinet Standard Specifications for Road and Bridge Construction. The project falls under NAICS code 213111 and is managed through the KDVA. Interested parties should note the response deadline of November 3, 2026.

POSTED

DEADLINE

Orphan Well Plugging and Workover ServicesThis subcontract for Orphan Well Plugging and Workover Services involves performing technical drilling and plugging operations for prime contractors on projects managed by the Ohio Department of Natural Resources. The scope of work includes establishing well control, cleaning holes to total depth, installing cement or grout plugs from 152 feet to 30 inches below ground level, and cutting casing to 48 inches below the surface. The contractor is responsible for providing all necessary drilling rigs and workover tools to deliver fully plugged and sealed wells. All operations must be conducted in strict adherence to OAC 1501-9-11-10 and ORC 1509 regulations. This opportunity falls under NAICS code 213111 and is associated with the Ohio Department of Natural Resources Oil and Gas division. The response deadline for this solicitation is November 19, 2026.

Dnr900200 Oil And Gas Dnrfra

POSTED

DEADLINE

Managed Pressure Drilling (MPD) Specialist ServicesThis subcontract for Managed Pressure Drilling Specialist Services involves providing specialized operations for prime contractors working on Oil and Gas Development Company Limited projects in Pakistan. The scope of work focuses on the installation and operation of MPD systems designed to maintain bottom-hole pressure within narrow windows through the use of automated choke manifolds, Rotating Control Devices, and real-time monitoring. The service provider is responsible for delivering precisely pressure-managed wellbore construction, which includes critical tasks such as kick detection and mitigation. Interested parties must respond by November 12, 2026, to support these technical drilling operations under NAICS code 213111.

Oil & Gas Development Company Limited (OGDCL)

POSTED

DEADLINE

Underbalanced Drilling (UBD) Specialist ServicesThis subcontract for Underbalanced Drilling Specialist Services involves performing specialized drilling operations for prime contractors on projects managed by the Oil & Gas Development Company Limited in Pakistan. The scope of work focuses on managing underbalanced fluid systems and operating surface equipment, including rotating control devices and UBD surface packages, to handle produced fluids and monitor pressure to prevent wellbore collapse while maximizing production. The primary objective is the delivery of a successfully drilled wellbore. To ensure safety and technical proficiency, personnel are required to hold valid IWCF or IADC well control certifications. Interested parties must respond by November 12, 2026.

Oil & Gas Development Company Limited (OGDCL)

POSTED

DEADLINE

Clean Fill Material SupplyThis subcontract agreement involves the supply and delivery of clean earth and rubble fill for prime contractors working on projects for the City of Cincinnati Department of Buildings and Inspections. The selected provider is responsible for delivering specified volumes of fill material to project sites, ensuring all materials strictly adhere to the clean earth specifications outlined in the statement of work. To meet quality standards, the fill material must contain less than 30 percent rubble, and no individual pieces may exceed dimensions of 10 by 10 by 10 inches. This opportunity is categorized under NAICS code 213111 and is managed by the Licenses and Permits Building and Inspections agency.

Licenses & Permits Bldg & Inspections

POSTED

DEADLINE

ODNR, Division of Oil & Gas – OWP – Federal Project –Scioto 3F - 2 Wells

Solicitation # SRC0000042633

The Ohio Department of Natural Resources, Division of Oil and Gas Resources Management, is soliciting bids for the Scioto 3F Project to plug and plate two orphan wells, Oertels Corner #1 and Romanello #1, located in Jefferson Township, Scioto County. The scope of work encompasses mobilization, well site development, drilling or cleaning out and plugging of the wells, decommissioning and disposal of all casing and production equipment, and full restoration of disturbed areas. Key technical deliverables include the installation of cement plugs from 210 feet to within 30 inches of ground level and the maintenance of strict well control throughout the process. Work must be performed in accordance with Ohio Revised Code 1509 and Ohio Administrative Code Chapters 1501:9-11 and 1501:9-12. As a federally funded project, contractors must comply with Davis-Bacon prevailing wage requirements and Buy America sourcing mandates for iron, steel, and manufactured construction materials. Eligible bidders must be active on CSP900922 (DAS Index No. MAC110), attend the mandatory pre-bid meeting on November 4, 2026, and be in good standing with the agency. The contract will be awarded to the lowest responsive and responsible bidder based on submissions via OhioBuys. Performance must begin within three months of the contract end date and be completed by May 1, 2027, or five months after the effective date, whichever is sooner. Invoicing is managed through the Orphan Well Project Management Contractor Portal and requires supporting documentation, including payroll reports for federal compliance.

Dnr900200 Oil And Gas Dnrfra

POSTED

DEADLINE

Field Trial Operations & Well-Site ServicesThis subcontract for Field Trial Operations and Well-Site Services supports ARPA-E subsurface resource extraction projects under the Department of Energy. The selected provider will be responsible for the physical execution of field trials, specifically focusing on stimulation and fracturing operations, water injection and recovery management, and comprehensive well-scale testing. To successfully perform these duties, the contractor must provide necessary well-intervention equipment and fracturing pumps while securing all required site-specific permits. The primary objective of the engagement is the delivery of completed field trial execution and the provision of detailed operational performance data. Interested parties should note that the response deadline is November 20, 2026, and the work falls under NAICS code 213111.

Advanced Rsrch Proj Agency ARPA-E

POSTED

DEADLINE

Well Plugging and Cementing ServicesThis subcontract for Well Plugging and Cementing Services involves performing technical plugging of orphaned oil and gas wells for prime contractors on projects managed by the Mississippi Department of Oil and Gas. The scope of work requires the execution of pipe and cementing operations in strict accordance with Mississippi Oil and Gas Board rules and IIJA Orphan Well Program specifications. The contractor will utilize specialized cementing units, plugging equipment, and casing tools to ensure all wells are permanently plugged and sealed. Operational requirements include coordinating with board representatives for on-site witnessing during a standard five-day work week. The solicitation was posted on October 5, 2026, with a response deadline of December 18, 2026. This project falls under NAICS code 213111 and is focused on environmental remediation and regulatory compliance within the state of Mississippi.

MS DEPT of OIL and GAS

POSTED

DEADLINE

1 Well Sidetrack Program at Island Freeman within THUMS Long Beach Operating AreasTHUMS Long Beach Company proposes to sidetrack the existing injection well D-607, identified by API number 0423720318, and convert it into a production well within the Wilmington Oil Field located offshore on Island Freeman in Los Angeles, California. The scope of work involves drilling and installing cemented casing and screens into the Ranger Zone, followed by the installation of new production equipment. This project requires the approval of a permit from the California Department of Conservation, Geologic Energy Management Division. The project is subject to a Notice of Exemption issued on September 30, 2026, which declares the sidetrack program exempt from the California Environmental Quality Act under Categorical Exemptions Class 1, 2, and 4. Administrative oversight is managed by the California Department of Conservation, with Greg Berg serving as the Associate Oil and Gas Engineer and Pradeep Thallapalle acting as the agent.

California Conservation, Department of

POSTED

DEADLINE

842360_CalNRG_OGCalNRG Operating, LLC has received approval from the California Department of Conservation, Geologic Energy Management Division to rework the Scarlett 4 well, API number 0411100834, located in the Montalvo West Oil Field in Ventura County, California. The project involves reworking a well that has been active since 1962 and is expected to take approximately 10 to 15 days to complete. Because the well is situated on an existing well pad with established access roads, the project requires no new land disturbance, no new facilities, and no changes to existing infrastructure. Produced water will be used for well work via existing lines, while fresh water will be brought in specifically for cement blending. The project is located within a developed oil field in an environmentally sensitive area defined by its proximity to the ocean and its location within the Coastal Zone. Despite this, the project is expected to have no significant environmental effects, as it involves no vegetation disturbance and no increase in flowline capacity. Operations will continue to comply with Senate Bill 1137 regulations for wells in health protection zones. Consequently, CalGEM has determined that the project is exempt from full environmental review requirements under the California Environmental Quality Act, citing various statutory and categorical exemptions.

California Conservation, Department of

POSTED

DEADLINE

THUMS D-571 Well Sidetrack Program at Island FreemanTHUMS Long Beach CO. proposes to sidetrack well D-571, identified by API number 0423721997, located at Island Freeman within the Wilmington Oil Field in Los Angeles, California. The project involves adding pay from an existing well head and will not require the construction of new facilities or the expansion of current infrastructure. This program is being conducted under permit number 7057422 and is overseen by the California Department of Conservation, Geologic Energy Management Division. The project has been issued a Notice of Exemption by the Geologic Energy Management Division, determining that the sidetrack program is exempt from California Environmental Quality Act review requirements. This exemption is based on Categorical Exemptions Class 1, 2, 4, 7, and 8, as the proposed work consists of minor alterations to existing facilities with negligible environmental impact.

California Conservation, Department of

POSTED

DEADLINE

Well Completion and Perforation ServicesThis subcontract for Well Completion and Perforation Services involves performing final well completion for prime contractors on CalGEM projects located in the Jacalitos oil field in Coalinga. The primary objective is to restore economic production rates by perforating casing in the Temblor zone to create necessary flow paths and installing the required completion equipment. The service provider will utilize wireline or tubing-conveyed perforation tools and perforation guns to deliver a completed well ready for production. All operations must be conducted in strict compliance with CalGEM regulations under NAICS code 213111 for the California Department of Conservation.

California Conservation, Department of

POSTED

about 1 month ago

DEADLINE

N/A

AI Contract Overview

The City of Flagstaff is seeking proposals from licensed Arizona firms to provide comprehensive drilling services for a new water well at Fort Tuthill 2. The project involves drilling, casing, development, and aquifer testing of a single water production well, with oversight provided by the City’s hydrogeologist and engineering support from Tata & Howard. The well is to be constructed following a detailed conceptual design that specifies drilling via dual rotary methods, installing intermediate casing above the groundwater table, and extending 16-inch diameter casing to approximately 1,800 feet, with completion using louvered casing and filter pack to about 2,500 feet. The work includes supplying all materials, including casing and cement grout, with engineering data to be submitted for approval. Aquifer testing is planned for around seven days, with pumping rates estimated between 300 and 1,000 gallons per minute, which will be determined during construction. The well will ultimately be fitted with permanent submersible pumps and downhole equipment under a separate contract. The solicitation, titled "Well Drilling Service" with solicitation number 2020-44, was posted on January 8, 2020, with a response deadline of February 5, 2020. The project falls under NAICS code 213111 and is managed by the City of Flagstaff, Arizona. Interested firms can contact Emily Markel via email or phone for further information. The contract emphasizes adherence to technical specifications, oversight during all phases of drilling and testing, and the supply of all necessary materials to ensure the successful completion of the well in accordance with the approved design and project requirements.

General Info

Agency

Arizona → City of Flagstaff

NAICS

213111 - Drilling Oil and Gas Wells

Place of Performance

AZ, USA

Set-Aside

NONE

Documents

Solicitation 2020-44: Well Drilling Service

rfp

High

Contract No. 2020-44 - Well Drilling Services

contract-document

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJan 8

Solicitation

Response DeadlineFeb 5

Deadline has passed

Submission Closed

02/05/2020, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyArizona → City of Flagstaff

Contacts1 person available

OfficeN/A

Organization / AgencyArizona → City of Flagstaff

Office AddressN/A

Contacts

Emily Markel

contact@example.gov

+1 (555) 000-0000

Full Description

The City of Flagstaff (Owner) is seeking Proposals from Arizona licensed firms to provide Drilling Services: The City of Flagstaff’s is requiring a new water well to be drilled at Fort Tuthill 2.The work to be accomplished under the following technical specifications consists of drilling, casing, development and aquifer testing of one water production well for the City of Flagstaff (City) referenced as Fort Tuthill Well 2. The City has contracted ATC Group Services LLC (ATC) as the prime consultant Hydrogeologist to develop the conceptual well design, technical specifications and oversee drilling and subsequent testing of the well. ATC has subcontracted Tata & Howard (T&H) as the Engineer to provide technical support for the project.Fort Tuthill Well 2 shall be installed in accordance with the conceptual well design presented in this technical specification document. All materials including casing and cement grout shall be supplied and purchased by the Contractor. Engineering data covering all equipment and fabricated materials, which will become a permanent part of the work under this contract, shall be submitted to the City. The drilling, casing, development and aquifer testing of the well shall be conducted under the observation of the Hydrogeologist, Engineer and/or a representative from the City.The conceptual well design for Fort Tuthill Well 2 includes drilling of the well by the dual rotary drilling method with intermediate casing strings (above the groundwater table) and 16-inch diameter casing advanced to approximately 1,800 feet followed by completion of the well with louvered casing and filter pack to approximately 2,500 feet. Aquifer testing of the well is estimated at seven days with pumping rates that can range from 300 to 1,000 gallons per minute (gpm) which will be estimated during well construction. The well will eventually be equipped with permanent submersible pumping and downhole equipment under a separate contract.