Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WHEEL ASSEMBLY, PNEUMAT

Active
SPE7L3-26-T-146BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a pneumatic tire wheel assembly identified by NSN 2530-01-092-8482 and part number 7017602466, with a quantity of 33 units to be delivered FOB origin within 157 days of contract award. The item is classified as a critical application component and must conform precisely to source-controlled engineering drawings and technical specifications referenced in the DLA Master List of Technical and Quality Requirements, including revisions dated through 2025. All manufacturing and inspection activities must comply with stringent quality standards such as MIL-STD-1916 or ASQ H1331, mandating zero non-conformances for critical and major attributes, with acceptance verified at origin. The supplier is required to adhere to DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129R for marking and labeling, with specific preservation and packaging instructions outlined in SPI AK00000001 Rev D. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and covered defense information protocols apply. Configuration changes require formal engineering change proposals and variance requests, and no government identification may be removed from non-accepted supplies. Packaging must be palletized per DLA requirements, and delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with no variance permitted in quantity. The solicitation closed on August 14, 2026, with a required ship date of January 19, 2027, and an original delivery deadline of March 20, 2027.

General Info

Procure 33 pneumatic tire wheel assemblies per strict military specs, deliver FOB origin by January 19, 2027, comply with CMMC Level 2 and DLA standards.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

336390 - Other Motor Vehicle Parts ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-146B.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Matthew Curry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WHEEL ASSEMBLY,PNEUMATIC TIRE
WHEEL, PNEUMATIC TIRE
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED
DRAWING AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED
PART NUMBERS ARE PROVIDED, THE ITEMS
FURNISHED MUST MEET THE REQUIREMENTS OF THE
CITED DRAWING. OFFERORS WHO ARE INTERESTED IN
QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE
ACQUISITION MUST CONTACT THE COGNIZANT DESIGN
ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED
DRAWING.
ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT
THIS TIME.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SPE7L3-26-T-146B
SECTION B
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC DRAWING NR 19207 11601389 REVISION NR E DTD 02/12/2024 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 18876 MIS-20007 REVISION NR AJ DTD 05/19/2025 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 11601389 REVISION NR DTD 09/10/2025 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 11601389 REVISION NR D DTD 11/13/2019 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017602466 0001 EA 33.000
NSN/MATERIAL:2530010928482
DELIVERY (IN DAYS):0157
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
SPE7L3-26-T-146B
SECTION B
PR: 7017602466 PRLI: 0001 CONT’D
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION, PACKAGING, AND PACKING SHALL BE IN ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION ACORDING TO SPI AK00000001 REV D DATE 11/13/2019
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/19/2027 Original Required Delivery Date:03/20/2027
SPE7L3-26-T-146B NSN/Part Number: 2530-01-092-8482 Quantity: 33 EA Purchase Request: 7017602466QTY: 33 Delivery: 157 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336390
New
DIBBS
BAR, EMERGENCY RESCUE
Solicitation # SPE7LX-26-U-9135
The contract solicitation SPE7LX-26-U-9135 is a total small business set-aside for the procurement of 2,100 units of BAR, EMERGENCY RESCUE, with delivery required within 50 days after date of award. The item is governed by strict technical and quality requirements from the DLA Master List of Technical and Quality Requirements and must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and labeling, including special provisions for hazardous and radioactive materials under OSHA’s Hazard Communication Standard. Cybersecurity is a critical component, as the contractor must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to NIST SP 800-171 controls for safeguarding covered defense information, with mandatory reporting of cyber incidents. The contract includes numerous FAR and DFARS clauses addressing whistleblower protections, prohibition of internal confidentiality agreements, restrictions on former DoD officials’ compensation, and a ban on acquiring telecommunications equipment from prohibited foreign entities such as Huawei and ZTE. Technical data associated with the item is subject to export controls under ITAR or EAR, requiring contractors to hold a US/Canada Joint Certification Program certification, complete mandatory training, and receive DLA approval before accessing the data. The contract is structured as an indefinite-delivery contract with an estimated value of $83,034 and a maximum contract value of $350,000, and all deliveries are FOB destination. Invoicing must be submitted via Wide Area WorkFlow, and the contractor must maintain an active UEI and CAGE code in SAM.gov. The solicitation is limited to small businesses, and offerors must represent their size and socioeconomic status accurately, including disclosures for any joint ventures. All proposals must be submitted electronically via DIBBS by the August 18, 2026 deadline.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
RIM, WHEEL, PNEUMATIC TI
Solicitation # SPE7LX-26-U-9194
The contract pertains to the procurement of 9 pneumatic tires with rims, identified by NSN 2530-01-623-3528 and part number 119243A1, under purchase request 1000238745. Delivery is required within 75 days FOB origin with no variance tolerated in quantity, and inspection and acceptance occur at the destination. Packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951 if applicable; if the item is non-hazardous under Fed-Std-313, commercial packaging per ASTM D3951 is permitted only if not contradicted by DLA requirements, otherwise hazardous material must meet TQ requirement IP025. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements for Procurement. The Unit of Issue is each, with a quantity of 9 units, and the contract is issued under solicitation SPE7LX-26-U-9194 by the Department of Defense’s Strategic Acquisition Program Directorate. The contract is classified under NAICS code 336390, and the point of contact is Theodore Misiolek. The product is covered under DLA Direct, CONUS, and this solicitation was posted on August 3, 2026, with a response deadline of August 18, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7LX-26-U-9185
The contract is for the procurement of a fluid filter element with NSN 2940-01-568-5541 and part number 84122645, sourced from CNH INDUSTRIAL AMERICA LLC, under solicitation SPE7LX-26-U-9185. The quantity required is 528 units, each to be delivered in single units of issue, with a fixed delivery timeline of 62 days from contract award. Delivery is FOB origin, and no variance in quantity is permitted—zero percent plus or minus. Inspection and acceptance occur at the destination point. All packaging must comply with ASTM D3951 and be labeled and marked in strict accordance with MIL-STD-129, while palletization must meet DLA’s RP001 packaging requirements. Technical and quality standards referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. The unit price and total value are not explicitly stated beyond the quantity and unit of issue, and the estimated quantity may not be fully procured by the IDC. The contract is issued by the Department of Defense’s Strategic Acquisition Program Directorate and is set under a federal procurement framework with a response deadline of August 18, 2026, and a posted date of August 3, 2026. Primary point of contact is Theodore Misiolek, reachable via email and phone for procurement inquiries.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
BOX, DOCUMENT
Solicitation # SPE8EN-26-T-2635
This contract, issued under solicitation SPE8EN-26-T-2635, specifies the procurement of 16 units of a boxed document storage item identified by NSN 2540015759648 and part number 182K0518-1 from HDT Expeditionary Systems Inc. The unit of issue is each (EA), with a fixed unit price of $16.00 and a total contract value of $256.00, with no variance allowed in quantity. Delivery is required within 56 days of award, with FOB origin terms and final delivery destination at the DLA Distribution facility in New Cumberland, Pennsylvania. All packaging must conform strictly to DLA Packaging Requirements for Procurement (RP001) and MIL-STD-129 for marking and labeling, with hazardous materials subject to TQ requirement IP025 and non-hazardous items to ASTM D3951, though DLA Master List technical and quality requirements always supersede ASTM standards. The item must be palletized per RP001, and government identification must be removed from any non-accepted supplies as required by RQ011. Documentation must include compliance with the DLA Master List of Technical and Quality Requirements identified by R or I numbers, and source approval requests are governed by RC001. Covered defense information may apply, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The original required delivery date is March 30, 2027, with a needed ship date of September 29, 2026, and all terms are subject to the controlling revision of the DLA Master List as of the solicitation issue date.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
DIBBS
TIRE AND WHEEL ASSY
Solicitation # SPE7LX-26-U-9211
This contract is for the procurement of a tire and wheel assembly identified by NSN 2530-01-503-9963 and part number 6623598 from JLG Industries, Inc., under solicitation SPE7LX-26-U-9211. The requirement is for 83 units at a unit price of $83.00, totaling $6,889.00, with delivery due within 75 days from the award date. The contract is classified as a DLA Direct, CONUS coverage item, with FOB origin delivery terms and no variance allowed in quantity. Inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding all other standards including ASTM D3951. All packaging and labeling must follow MIL-STD-129 and RP001 packaging requirements, with palletization strictly adhering to DLA guidelines. The item is designated as a critical application and must not contain any Class I ozone-depleting chemicals, with any substitutes requiring prior approval. The unit of issue is each, and the contract explicitly states the quantity is estimated and may not be fully purchased by the IDC. Compliance with all technical and quality specifications referenced in the DLA Master List is mandatory, and the revision in effect on the solicitation issue date governs. The point of contact for the contract is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
CYLINDER, ATTCH
Solicitation # SPE7L4-26-T-5964
The contract pertains to the procurement of two cylinders, attachment type, with the NSN 2530-01-503-4985 and part number 7138173 manufactured by JLG Industries, Inc. The item is designated as a critical application component and must comply with MIL-STD-130 for Item Unique Identification (IUID) labeling. All units must be individually packaged, properly preserved to prevent corrosion, and have moving parts adequately lubricated in accordance with MIL-STD-2073-1E packaging standards. Packaging must immobilize each item within its container and use preservation material code 49. Marking must follow MIL-STD-129, including a special marking code of 14 for center of balance, and all packaging and palletization must adhere to DLA’s packaging requirements. Delivery is FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The delivery window is 157 days from the contract award, with an original required delivery date of January 10, 2027, and a needed ship date of January 19, 2027. The items must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, under transportation guidelines specified in DLAD Proc Note C19 and C20. The solicitation number is SPE7L4-26-T-5964, issued under a federal acquisition framework with NAICS code 336390, and the contract is managed by the Department of Defense’s Combat Vehicles and Armament office.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
COVER, HANDLE, DOOR, V
Solicitation # SPE7L1-26-T-907Y
This contract pertains to the procurement of a cover, handle, and door component for vehicular applications, identified by NSN 2540-01-428-6195 and purchase request 7012536527, with a quantity of 1,755 units to be delivered within 90 days from the contract award. The item is designated as a critical application component and must be manufactured using a metal casting process requiring specific tooling; sourcing and engineering support are available through DLA’s Aviation or Land & Maritime Supply Chains. The item must comply with stringent technical and quality requirements drawn from the DLA Master List, with verification levels and acceptable quality levels mandated for critical, major, and minor attributes. Zero non-conformances are required in sampling per MIL-STD-1916 or equivalent zero-based plans, and a Certificate of Conformance is mandatory. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. Packaging must conform to MIL-STD-2073-1E, marking to MIL-STD-129 with no special codes, and palletization must follow DLA packaging standards. The item is to be delivered FOB origin with no quantity variance allowed, inspected and accepted at the point of origin. The delivery destination is DLA Distribution Red River in Texarkana, TX, with a required ship date of January 8, 2026. The contract is governed by DLA-specific requirements including configuration change management, inspection protocols, and hazardous materials handling procedures, and was solicited under SPE7L1-26-T-907Y with responses due by August 14, 2026.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
MOTOR, WINDSHIELD WI
Solicitation # SPE7LX-26-U-9183
This contract pertains to the procurement of a windshield wiper motor with NSN 2540-01-571-5828 and part number 1001095388, issued under solicitation SPE7LX-26-U-9183 for a quantity of 35 units at a unit price of $35.00, totaling $1,225. The item is classified under NAICS code 336390 and is being acquired by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 81 days FOB origin with no variance permitted in quantity, and inspection and acceptance occur at the destination. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, specifically RP001, and adhere to MIL-STD-129 for marking and labeling. If the item is non-hazardous, commercial packaging must conform to ASTM D3951, but this is subordinate to any applicable DLA technical requirements. Hazardous materials must follow Fed-Std-313 and TQ requirement IP025. Palletization must meet RP001 standards, and the unit of issue is each, with a quantity per unit pack of one. The contract specifies that the DLA Master List revision in effect on the solicitation issue date governs technical and quality compliance. The primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7L1-26-T-868B
The contract specifies the procurement of fluid filter elements under solicitation SPE7L1-26-T-868B, issued by the Department of Defense’s Land Supply Chain, with a Women-Owned Small Business set-aside under NAICS code 336390. The primary lineitem consists of 627 units of fluid filter elements at a unit price of $627.00, totaling $393,129.00, with delivery required within 168 days of the solicitation issue date, by January 19, 2027, to the destination point in Tracy, California. The items must be packaged and marked strictly in accordance with MIL-STD-2073-1E and MIL-STD-129, with preservation method code 31, unit container D3, intermediate container E5, and pack code U. Special marking is not required, and palletization must comply with DLA Packaging Requirements for Procurement. The contract mandates adherence to NAVSEA 5100-003D, strictly prohibiting the intentional use of mercury or mercury compounds in the supplied hardware, except for functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and specific chemical reagents, with portable mercury-containing devices required to have shockproof construction and a secondary containment boundary. All hazardous materials must be labeled per the Hazard Communication Standard and DFARS 252.223-7001. Inspection and acceptance occur at the destination, and the contractor must comply with comprehensive cybersecurity and information safeguarding clauses including 252.204-7012 and 252.204-7008. The contract includes clauses related to small business representation, trafficking in persons, employment eligibility verification, and the prohibition of unauthorized obligations, with accelerated payments to small business subcontractors required. The contract is fixed-price, invoicing is mandatory through WAWF, and the contractor must maintain a valid UEI and CAGE code. Technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List, and the contract includes configuration change management and variance request procedures. The contract value is estimated between $188,000 and $1,000,000 based on associated purchase requests and unit pricing, though no formal ceiling is stated.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
DIBBS
PROPELLER SHAFT WITH U
Solicitation # SPE7L3-26-T-146K
The contract specifies the procurement of 188 units of a propeller shaft with universal joint for vehicular use, identified by NSN 2520-01-545-0390 under solicitation SPE7L3-26-T-146K. Delivery is required within 301 days after award, with technical and quality requirements dictated by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and governed by the revision in effect on the solicitation issue or award date depending on acquisition scale. The item includes components subject to Qualified Products or Manufacturers Lists, mandating strict adherence to qualification standards outlined in procurement note H02. Configuration changes require formal engineering change proposals and variance requests, and all supplies must comply with DLA packaging standards. The use of Class I ozone-depleting chemicals is strictly prohibited, with any substitutions needing prior approval unless explicitly permitted by the specification. Export control of technical data associated with this item falls under ITAR or EAR regulations, restricting unauthorized disclosure to foreign persons anywhere, including foreign nationals employed by U.S. entities. Compliance with DFARS 252.225-7048 is mandatory, and only contractors approved by DLA with valid US/Canada Joint Certification Program credentials, completion of mandatory export control training, and approved questionnaire responses may access the controlled technical data. Cybersecurity requirements include CMMC Level 2 certification through a certified third-party assessment organization. Higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance may occur at the origin. The point of contact for this solicitation is Benita Umoren, and performance is designated for Texarkana, Texas, with the solicitation opening on August 3, 2026, and closing on August 14, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
COVER, BATTERY BOX
Solicitation # SPE7L4-26-T-5814
The contract entails the procurement of a battery box cover identified by NSN 6160014334985, with a total quantity of 99 units divided into two line items—22 units at $22.00 each and 77 units at $55.00 each—under solicitation SPE7L4-26-T-5814, which is a total small business set-aside. Delivery is required within 165 days with a final delivery date of March 31, 2027, and shipments must be made FOB origin with no variance allowed in quantity. Inspection and acceptance occur at origin, and all items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including specific packaging codes and materials. The product is classified as a critical application item with specialty metal components subject to DFARS clauses 252.225-7008, 7009, and 7010. The contractor must maintain a calibration system aligned with ANSI/NCSL Z540-1-1994 or ISO 10012-1 and is prohibited from using Class I ozone-depleting chemicals, requiring approval for any substitute materials. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be verified at designated levels. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, and configuration changes require formal engineering change proposals. Two separate delivery addresses are specified—one in Tracy, California, and one in New Cumberland, Pennsylvania—with shipping details governed by DLA procedural notes. A certificate of conformance is mandatory, and all documentation references technical data packages tied to specific revision-controlled drawings dated through 2023.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
DIBBS
HOUSING SECTION, HEA
Solicitation # SPE7L4-26-T-5960
The contract pertains to the procurement of one unit of item NSN 2540-01-567-4037 with purchase request number 7017707006, requiring delivery within five days of award. The item must be shipped FOB origin with no variance in quantity allowed, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951; if the item is nonhazardous per FED-STD-313, it must be commercially packaged in accordance with ASTM D3951, but all DLA-specific technical requirements take precedence. All packaging and labeling must conform to MIL-STD-129. The item must be palletized as specified in RP001 and shipped as a bulk break point designated W80BTZ via traceable freight methods—parcel post is prohibited. The delivery point is the Central Receiving Point at Fort Carson, Colorado, with the same address used for the freight shipping and mark-for locations. The shipment must be accompanied by the designated Transportation Control Number W80BTZ62090163 and identified under project TP 1. The required delivery date is July 31, 2026, and the solicitation was issued under contract number SPE7L4-26-T-5960, with a response deadline of August 14, 2026. The contracting activity is under the Department of Defense, specifically the LSO Combat Vehicles and Armament office, with point of contact Anna-Rachelle Betts.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThis contract requires the provision of globally harmonized system compliant safety data sheets, hazard warning labels, and MIL-STD-129 marking for hazardous materials used in shipment and storage, ensuring full alignment with Defense Federal Acquisition Regulation Supplement and Defense Logistics Agency mandates. All deliverables must meet stringent military standards for labeling and documentation to support safe handling, transport, and long-term storage of hazardous commodities within DOD supply chains. The work is performance-based and tied to a specific location in Jacksonville with a ZIP code of 32212-0103, and the solicitation falls under NAICS code 541690 for other scientific and technical consulting services. It is structured as a subcontract with a response deadline of August 14, 2026, and was posted on August 3, 2026. Compliance with DFARS and DLA requirements is mandatory, and all materials must be accurately marked and documented for traceability and safety throughout the logistics lifecycle.
Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 323113
New
DIBBS
Military-Grade Packaging and PalletizationThe contract requires the delivery of packaging gaskets that meet stringent military specifications, specifically MIL-DTL-117, TYPE II, CLASS C, STYLE 1, ensuring they are sealed in waterproof, greaseproof, and UV-resistant bags to withstand harsh environmental conditions. These gaskets must be precisely packaged to maintain integrity during storage and transit, with strict adherence to material and sealing standards defined by the military. All shipments must also be palletized in accordance with DLA RP001 logistics standards, ensuring uniform size, weight distribution, labeling, and secure strapping for efficient handling within defense supply chains. The packaging and palletizing process must support seamless integration into military logistics systems and enable rapid deployment. This subcontract is issued under NAICS code 323113, indicating it relates to printing and related support activities, though the core scope focuses on specialized packaging and material handling for defense components. The opportunity was posted on August 3, 2026, with bids due by August 14, 2026, and performance is expected to be delivered to Jacksonville, Florida, at ZIP code 32212-0103. The contract is managed by the Department of Defense under the Land Supplier Operations Vehicle Support office, highlighting its importance to vehicle and equipment readiness. Compliance with all technical, logistical, and quality requirements is mandatory, and failure to meet the specified standards could result in rejection of deliverables.
Commercial Screen Printing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Precision Gasket ManufacturingThe contract requires the precise manufacturing of a critical application gasket to meet stringent technical specifications, including the use of a designated material composition identified as H.B. Fuller 81702 with part number FCA25751, adherence to strict dimensional tolerances, and full compliance with applicable military standards. The gasket is intended for use in high-performance environments where reliability and precision are essential, and all production must align with the defined technical requirements to ensure operational integrity. Issued as a subcontract under the NAICS code 332996 by the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT organization, the opportunity is open for response until August 14, 2026, with the work to be performed at a specified location in Jacksonville, Florida, zip code 32212-0103. The solicitation, accessible via the DIBBS platform, does not specify a set-aside type, and all interested parties must submit proposals before the deadline to be considered for award.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Defense Information (CDI)The contract requires implementation of cybersecurity measures to protect Covered Defense Information in accordance with NIST Special Publication 800-171, ensuring all systems handling such data meet strict federal security standards. Compliance includes adopting required security controls, maintaining documentation of implementation, and establishing processes to detect, report, and respond to cyber incidents as mandated by DFARS clauses. Failure to meet these requirements may result in contract non-compliance and potential penalties. The work is to be performed in San Diego, California, with a response deadline of August 14, 2026, and is classified as a subcontract under NAICS code 541512, indicating it involves computer systems design services for the Department of Defense. The contractor must ensure all cyber incident reporting procedures are operational and aligned with DoD expectations, with no flexibility in meeting the technical and procedural obligations outlined.
Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Documentation ServicesThe contract requires the provision of hazard warning labels, Safety Data Sheets, and regulatory compliance documentation for all hazardous components included in a parts kit, ensuring adherence to applicable safety and environmental regulations. The work is scoped for a subcontract under the Department of Defense, with the place of performance specified as San Diego, California, 92136-3581, and the NAICS code 541690 indicates it falls under other professional, scientific, and technical services, specifically environmental and compliance-related consulting. All deliverables must accurately reflect the chemical and physical hazards of the materials in the kit and comply with international, federal, and defense-specific standards for labeling and documentation. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, and is administered through the Defense Logistics Agency’s DIBBS system. The contracting entity, LAND SUPPLIER OPNS VEHICLE SPT, operates within the broader Department of Defense supply chain framework, emphasizing the critical need for precise, timely, and legally compliant documentation to support safe handling, storage, transport, and use of hazardous materials in military equipment. Failure to provide complete and correct documentation may result in rejection of the parts kit and non-compliance penalties, making accuracy and regulatory alignment the primary focus of the subcontractor’s deliverables.
Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332998
New
DIBBS
Seal Replacement Parts Kit Manufacturing and SupplyThe contract entails the manufacture and delivery of a seal replacement parts kit identified by NSN 5330-01-698-6493, requiring full compliance with Department of Defense technical specifications, packaging requirements, and material safety standards. All products must be produced and assembled to meet stringent military-grade criteria to ensure performance, durability, and safety in operational environments. The work is to be performed in San Diego, California, with delivery scheduled to support Land Supplier Operations Vehicle Support initiatives under the Department of Defense. This is a subcontract opportunity posted on August 3, 2026, with a response deadline of August 14, 2026, and is categorized under NAICS code 332998 for other fabricated metal product manufacturing. The procurement is managed by the Department of Defense through its Land Supplier Operations Vehicle Support organization, and the place of performance is fixed at the specified San Diego location. All bidders must align with DLA’s compliance frameworks and ensure that both the parts and their packaging meet federal defense logistics requirements without exception.
Enameled Iron and Metal Sanitary Ware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Manufacture and Supply of Retainer, Packing (NSN: 5330007580791)The contract requires the manufacture and delivery of 43 units of a military-spec retainer, packing component identified by NSN 5330007580791, with strict adherence to federal packaging and marking regulations, as well as domestic manufacturing requirements under the Berry Amendment. All work must be performed in the United States to ensure compliance with defense procurement standards for domestically produced supplies. The item is intended for use by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with performance located in Texarkana, Texas, 75507-5000. The solicitation is designated as a subcontract opportunity, posted on August 3, 2026, with responses due by August 14, 2026, and is governed under NAICS code 339991 for other miscellaneous manufacturing. Potential bidders must meet all federal compliance obligations and ensure full traceability and documentation of materials and production processes.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
Gasket Supply for Defense ApplicationsContract calls for the supply of 182 specialized asbestos-free gaskets designated by NSN 5330015162090, engineered to meet military specifications for use in defense and naval systems. Each unit must be manufactured, packaged, and labeled in full compliance with federal standards for hazardous materials, including the submission of complete safety data sheets and military-compliant packaging to ensure safe handling and transportation. The gaskets are intended for performance at a designated location in Tracy, California, with a zip code of 95304-5000, and the contract is structured as a subcontract under the Department of Defense’s Land Supplier Operations Vehicle Support. The solicitation, identified by the DIBBS link and posted on August 3, 2026, requires responses to be submitted no later than August 14, 2026, with NAICS code 332994 indicating the classification within miscellaneous fabricated metal product manufacturing. All deliverables must align precisely with defense procurement requirements to ensure seamless integration into operational platforms.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-127E
This contract is for the procurement of a gasket, identified by NSN 5330-01-258-2599 and part number 962M, with a quantity of 115 units, to be delivered FOB origin within 110 days of contract award. The item is designated as a critical application component and must comply strictly with DLA packaging and technical requirements, including adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for procurement packaging standards. The supply must be sealed in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor deliveries, foreign military sales, and stock shipments. The contract prohibits intentional addition of mercury or mercury-containing compounds except in specific functional applications like batteries, fluorescent lamps, sensors, and weapon systems, with additional containment and shock-proof requirements for portable items, as defined by NAVSEA 5100-003D. Asbestos is strictly forbidden under FED-STD-313 definitions. Delivery must be made to the DLA Distribution center in New Cumberland, Pennsylvania, following all hazardous material shipping protocols outlined in DLAD Proc Note C19 and C20. The unit price is $115.00 per unit, totaling $13,225.00, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must include the specified packing methods and containment codes. The solicitation number is SPE7L3-26-T-127E, with a response deadline of August 3, 2026, and a need ship date of November 22, 2026, and original delivery completion by December 31, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RA001.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-125S
The contract pertains to the procurement of a gasket with NSN 5330-01-479-9408 and part number 032757, requiring a quantity of 28 units to be delivered FOB origin within 106 days, with no variance allowed in quantity. Delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, ensuring the item is sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV exposure. Marking follows MIL-STD-129 with the special instruction “Do not bend,” and palletization adheres to DLA packaging standards. The item is designated as a critical application item, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7L3-26-T-125S, with a response deadline of August 3, 2026, and the required ship date is November 18, 2026, for an original delivery requirement of December 20, 2026. Unit of issue is each, priced at $28.00 per unit, with a total contract value of $784. The point of contact is Susan Diamond, reachable at DLA email and phone provided.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
INSTALLATION KIT, VEHIC
Solicitation # SPE7L3-26-T-124W
This contract is for the supply of an Installation Kit, Vehicular Equipment identified by NSN 2510-01-673-1162 and part number 0385000112-00, with a quantity of 15 units to be delivered FOB origin under solicitation SPE7L3-26-T-124W. The delivery deadline is 177 days from contract award, with an original required delivery date of October 14, 2026, and a needed ship date of January 28, 2027. Each unit is priced at $15.00, totaling a contract value of $225.00, with zero tolerance for quantity variance. All items must comply with strict packaging standards outlined in MIL-STD-2073-1E Appendix D for kits, and marking must adhere to MIL-STD-129. The kit is designated as a critical application item, and the use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification requirements unless explicitly authorized. Packaging must follow DLA-specific requirements, and the delivery destination is the Central Receiving Warehouse at DLA Distribution Barstow, California. Preservation and packaging methods, including wrap and cushioning materials, are to be specified as ZZ per the contract’s packaging data. The item must be shipped to the provided postal address with no deviations allowed, and all transportation logistics must follow referenced DLAD procedures. The contract is issued under DLA’s authorized unit of issue, and technical and quality requirements linked via R or I numbers are governed by the DLA Master List effective on the solicitation or award date, depending on procurement type.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336211
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L3-26-Q-1247
The contract is for the procurement of 47 units of a door, hatch, or vehicle component manufactured through a metal casting process, requiring specialized tooling for production. The item is classified as a ballistic item, necessitating a first article test and a Certificate of Quality Conformance in accordance with SQAP013408919. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item is subject to DLA packaging standards and strict prohibitions against the use of Class I ozone-depleting chemicals, which override any conflicting specification requirements; alternative chemicals must be submitted for approval unless explicitly authorized. This is a total small business set-aside under NAICS code 336211 with full and open competition among qualified small businesses. The contract involves export-controlled technical data governed by either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location and requiring strict compliance with DFARS 252.225-7048. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and approved authorization from DLA. Packaging and handling must comply with DLA standards, and any non-accepted supplies must have government identification removed. The delivery timeline is 184 days after order, with the solicitation closing on August 18, 2026, and the point of contact for inquiries is McKenzie Biniker of the Department of Defense’s Land Supplier Operations Vehicle Support.
Motor Vehicle Body Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details