Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Wire EDM and Vacuum Nucleation Services

Open

Federal

Response Deadline11/11/2026, 03:00:00 PM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the NASA Shared Services Center involves providing specialized Wire EDM and Vacuum Nucleation Services to support projects at the Marshall Space Flight Center. The scope of work focuses on the precision removal of parts from build plates using wire Electrical Discharge Machining, followed by comprehensive powder removal from all surfaces and vacuum nucleation to protect hardware from moisture contamination. The final objective is to deliver cleaned and separated hardware that is fully prepared for Hot Isostatic Pressing. Due to the nature of the hardware and the agency involved, the contractor must maintain DDTC Registration and ensure full ITAR compliance. This technical service falls under NAICS code 332710 and is designed to support prime contractors in delivering high-precision components for aerospace applications.

General Info

Subcontract for NASA Wire EDM and Vacuum Nucleation services requiring ITAR compliance.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

332710 - Machine Shops

Place of Performance

MS

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC27943792Q.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

INRODES Supplemental RDRE TCA Hardware

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 11

Submission deadline

Response Deadline

11/11/2026, 03:00:00 PM CSTin 5 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs precision removal of parts from build plates and internal cleaning for prime contractors on NASA Marshall Space Flight Center projects. Removes parts using wire Electrical Discharge Machining (EDM), performs complete powder removal from all surfaces, and executes vacuum nucleation to prevent moisture contamination. Requires DDTC Registration and ITAR compliance. Delivers cleaned, separated hardware ready for HIP.

Similar Contracts

Same NAICS industry code

Sign Post Hardware and Accessory SupplyThe Sign Post Hardware and Accessory Supply subcontract, managed by the Washington Planning and Public Works agency, involves the provision of specialized mounting and finishing hardware for prime contractors operating on Pierce County projects. The scope of work includes the delivery of assorted hardware kits containing cast aluminum sign caps, 90-degree crosspiece dividers, galvanized 3/8 inch steel rivets, and surface mount post bases. All supplied materials must adhere to TeleSpar standards or an approved equivalent. This opportunity is categorized under NAICS code 332710 and was posted on November 6, 2026. Interested parties must submit their responses by the deadline of November 20, 2026. Further details regarding the procurement process can be accessed through the official OpenGov procurement portal for Pierce County.

Planning and Public Works

POSTED

about 10 hours ago

DEADLINE

Supply of TEE, TUBE TO BOSSThis subcontract involves the manufacture and supply of TEE, TUBE TO BOSS hardware for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for sourcing or producing components that strictly adhere to technical specifications and ensuring all items are delivered to the designated performance location in New Cumberland. Compliance is a critical component of this agreement, requiring strict adherence to DFARS 252.225-7001 Buy American and Balance of Payments Program regulations. Additionally, all hardware must be packaged according to ASTM D3951, labeled per MIL-STD-129, and palletized in accordance with RP001 DLA Packaging Requirements to meet military standards.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

Manufacture and Supply of Access Covers (NSN 5340014090972)This subcontract involves the manufacture and supply of 377 specialized access covers for prime contractors working on Department of Defense projects under the DLA Weapons Support Land Supply Chain. The fabrication must strictly adhere to Drawing NR 19207 12273848 and 19207 12273849, Revision D, utilizing precision metal fabrication equipment. Performance will take place in New Cumberland, Pennsylvania. The contractor is required to maintain strict regulatory compliance, including MIL-STD-129 for marking and DFARS 252.223-7008 regarding the use of hexavalent chromium. Additionally, the provider must meet DFARS 252.204-7012 cybersecurity standards to ensure the protection of sensitive information. The project falls under NAICS code 332710.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Machine Screw Supply (NAS1102-06-44)This subcontract involves the supply of 100 specialized aerospace-grade machine screws for the Department of Defense, specifically through the DLA Weapons Support ASC Commodities Division. The required components must match NAS1102-06-44 and NSN 5305011771791 standards. Performance will take place at Hill AFB, with the contractor responsible for either manufacturing or sourcing the fasteners to meet strict aerospace specifications. Compliance with government logistics and packaging standards is mandatory, requiring adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 DLA Packaging Requirements for palletization. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 332710.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Precision Ball Joint Fabrication (NSN 3040-01-483-1204)This subcontract opportunity is for the precision machining, manufacture, and supply of 31 specialized ball joints for the DLA Weapons Support Land Supply Chain. All components must be fabricated in accordance with NSN 3040-01-483-1204 and the DLA Master List of Technical and Quality Requirements. The project mandates strict adherence to MIL-STD-1916 or ASQ H1331 sampling standards and requires compliance with Berry Amendment domestic material restrictions. The contract is designated as a Total Small Business Set-Aside under NAICS code 332710, with performance located in New Cumberland. Qualified bidders must hold ITAR/EAR and CMMC Level 2 certifications to be eligible. Responses are due by November 16, 2026, for the delivery of the finished ball joints.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Supply of Straight Tube-to-Boss AdaptersThis subcontract involves the supply of 432 straight tube-to-boss adapters, identified by NSN 4730013542660, for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The contractor is responsible for manufacturing or sourcing the adapters to meet strict technical specifications, ensuring all items are packaged according to MIL-STD-2073-1E and shipments are marked in compliance with MIL-STD-129. The project falls under NAICS code 332710 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, following the posting date of November 6, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Sleeve Bushings (NSN 3120011712342)This subcontract involves the manufacture or procurement of 10 specialized sleeve bushings, identified by NSN 3120011712342, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring each unit is wrapped in neutral paper to prevent damage and must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 packaging and marking standards. Performance of the contract will take place in Anniston, Alabama. The agreement requires full compliance with the Buy American Act and the Berry Amendment. All invoicing must be processed through the Wide Area WorkFlow system. The opportunity was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332710.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Manufacture and Supply of Switch Actuator ArmsThis subcontract involves the manufacture and supply of 50 Switch Actuator Arms, identified as NSN 5930-01-353-5281, for the DLA Weapons Support Nuclear Reactor Program. Classified as a Critical Application Item, the components must be fabricated without the use of additive manufacturing and must strictly adhere to NAVSEA 5100-003D regulations prohibiting the intentional addition of mercury. The project requires strict compliance with military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Performance for this contract will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

Precision Machined Knob FabricationThis subcontract involves the precision fabrication of 107 units of Knob NSN 5355-01-191-0559 for the DLA Weapons Support Land Supply Chain. The project requires the use of precision machining equipment to ensure all components meet military specifications as outlined in the DLA Master List of Technical and Quality Requirements RA001. Performance will take place at Tinker AFB. The contractor is responsible for the full production cycle, including manufacturing, quality control sampling per MIL-STD-1916 or ASQ H1331, and final packaging and labeling in compliance with MIL-STD-129 and ASTM D3951. The final deliverable consists of 107 finished knobs meeting all specified technical and quality standards.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Manufacture of Straight Pipe-to-Hose Adapter (NSN 4730-01-330-3596)This subcontract involves the manufacture of one straight pipe-to-hose adapter, part number 1243-2294-2, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The component must be fabricated from copper alloy materials and strictly adhere to NAVSEA 5100-003D mercury-free requirements. The selected provider is required to supply comprehensive material traceability documentation and certify that the delivered part is in a new and unused condition. This procurement falls under NAICS code 332710 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

Precision Component Manufacturing (Cylinder Sleeve)This subcontract involves the precision manufacturing of cylinder sleeves for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The selected provider is responsible for fabricating two units to the exact dimensions and tolerances of NSN 4310-12-331-8500, utilizing either specialized casting or precision CNC machining. The contract requires strict adherence to military standards, specifically MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332710. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Precision Machining of Rigid Shaft CouplingsThis subcontract involves the precision machining and fabrication of 144 rigid shaft couplings to support DLA Weapons Support Land Supply Chain projects. The contractor is responsible for manufacturing these items according to five specific technical drawings, including drawing 19207 8764385 Revision F, utilizing CNC lathes, mills, or precision grinding equipment. The final deliverable consists of 144 completed and inspected shaft couplings. To be eligible, the provider must maintain CMMC Level 2, NIST SP 800-171, and either ISO 9001 or SAE AS9003 certifications. The work is categorized under NAICS code 332710 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

AI/ML Observability Implementation and Knowledge TransferThis 8(a) sole source subcontract, titled AI/ML Observability Implementation and Knowledge Transfer, supports prime contractors on NASA Marshall Space Flight Center projects. The scope of work involves the production rollout of AI/ML observability and governance, specifically focusing on the setup of telemetry ingestion and the creation of SQL-based visualization dashboards. To ensure long-term sustainability, the contractor is responsible for providing comprehensive knowledge transfer through the development of technical user guides and integration instructions. The project requires strict adherence to ITAR and CUI policies to maintain data security and regulatory compliance. The final deliverables include a fully production-ready observability system and a complete suite of technical documentation. This effort is managed under the NASA Shared Services Center with a primary focus on NAICS code 541511.

Custom Computer Programming Services

POSTED

about 15 hours ago

DEADLINE

Private Cloud Infrastructure Deployment and ConfigurationThis 8(a) sole source subcontract, titled Private Cloud Infrastructure Deployment and Configuration, is issued by the NASA Shared Services Center for projects at the Marshall Space Flight Center. The primary objective is the installation, configuration, and deployment of the AI Enterprise Self-Hosted Application and AI Gateway for prime contractors. Technical requirements include the deployment of Helm charts, management of deployment secrets, and the integration of the solution into a zero-trust architecture utilizing OpenTelemetry-compatible protocols for metrics, spans, and logs. The successful contractor must ensure strict compliance with ITAR and CUI handling policies to maintain security standards. The final deliverable is a fully operational AI Enterprise Application instance. This opportunity falls under NAICS code 541512 and was posted on November 6, 2026, with a response deadline of November 11, 2026.

Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

Hot Isostatic Pressing (HIP) ServicesThis subcontract through the NASA Shared Services Center involves providing specialized high-pressure and high-temperature thermal processing for prime contractors supporting NASA Marshall Space Flight Center projects. The primary objective is to perform Hot Isostatic Pressing at a qualified facility to eliminate internal porosity in GRCop-42 additive manufactured parts. The selected provider must maintain DDTC Registration and ensure full ITAR compliance throughout the execution of the work. Final deliverables include the HIP-treated hardware along with comprehensive process validation data for the specific HIP cycle utilized.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

GRCop-42 Powder SupplyThis subcontract, managed by the NASA Shared Services Center, involves the supply of high-purity GRCop-42 alloy powder to support prime contractors working on NASA Marshall Space Flight Center projects. The material is specifically required for InRoDES hardware and must strictly adhere to NASA's validated specifications. To ensure quality and consistency, the powder must be sourced exclusively from either Powder Alloy Corporation or Linde Advanced Materials Technologies Inc. The selected provider is responsible for delivering certified GRCop-42 powder along with comprehensive material traceability documentation. This procurement falls under NAICS code 327993, with a response deadline set for November 11, 2026.

Mineral Wool Manufacturing

POSTED

about 15 hours ago

DEADLINE

GRCop-42 Additive Manufacturing (PBF)This subcontract through the NASA Shared Services Center involves the primary fabrication of chamber and injector hardware for projects at the NASA Marshall Space Flight Center. The selected provider will utilize a Laser Powder Bed Fusion system with a 400x400x400 mm build volume to create monolithic parts using GRCop-42 alloy powder, ensuring a minimum as-built density of 99 percent. Deliverables include the completed as-built hardware along with all necessary process validation data. To be eligible, contractors must maintain DDTC Registration and full ITAR compliance, while adhering to AS9100 or ISO9001 quality management systems. The project falls under NAICS code 332710, with a response deadline set for November 11, 2026.

POSTED

about 15 hours ago

DEADLINE

Pydantic Logfire Enterprise

Solicitation # 80NSSC26948859Q

NASA/NSSC is seeking to acquire Pydantic Logfire Enterprise, an AI Enterprise Self-Hosted Application and AI Gateway, to support AI/ML observability and governance at the NASA Marshall Space Flight Center (MSFC). The agency intends to issue a sole source contract to Pydantic Services Inc under FAR 12.102(a) and FAR 19.8, as they are determined to be the sole provider of the software. The procurement falls under NAICS code 513210 and follows FAR Part 12 procedures for commercial items. The solution will be deployed within the government's private cloud or data center environment using a self-hosted Kubernetes architecture in Huntsville, Alabama, aligning with NASA's zero-trust architecture and complying with ITAR and CUI policies. The period of performance spans twelve months from July 14, 2026, to July 27, 2027, divided into a setup, testing, and configuration phase followed by a production phase. Deliverables include the software installation, premium remote support via email or Slack, and comprehensive documentation. Financial terms specify that license fees are invoiced annually in advance, while usage overages are invoiced quarterly in arrears, with payment terms set at net 30 days. The contract limits the customer to one application instance, with any additional instances requiring a written change order. Interested parties were requested to submit capability statements by November 11, 2026, for the purpose of determining if the procurement should remain non-competitive.

Software Publishers

POSTED

about 15 hours ago

DEADLINE

LUMBER REPLENISHMENT FOR EGS

Solicitation # 80NSSC26948332Q

Solicitation 80NSSC26948332Q is a firm-fixed-price request for quotation issued by the NASA Shared Services Center for the replenishment of 168 units of Grade 1 Douglas-Fir lumber. This procurement is set aside for small businesses under NAICS code 321912. The required lumber must be 2x12x16 feet with standard dressed dimensions of 1.5 by 11.25 inches and a maximum moisture content of 19 percent. Technical specifications require the wood to be straight with minimal knots and no warping or twisting. All materials must be heat treated to ISPM 15 standards, reaching a minimum core temperature of 56 degrees Celsius for at least 30 consecutive minutes, and each piece must be marked with the appropriate heat treatment stamp. The contract is awarded based on the lowest price technically acceptable (LPTA) criteria. Delivery is FOB Destination to the Logistics Facility at Kennedy Space Center, Florida, with receiving hours from 7:00 am to 2:30 pm. Offerors must be registered in the System for Award Management and submit their quotes by November 11, 2026, at 3:00 p.m. CT to McKenzie Hanson. Quotes must remain valid for 30 days and include two points of contact. Packaging must ensure the lumber is bundled, wrapped, and protected from the elements during transit.

Cut Stock, Resawing Lumber, and Planing

POSTED

about 15 hours ago

DEADLINE

Fiber Cables and Various Accessories

Solicitation # 80NSSC27946786Q

Solicitation 80NSSC27946786Q is a request for quotation issued by the NASA Shared Services Center for the procurement of fiber cables and various network accessories to support the NASA Marshall Space Flight Center. This is a brand name or equal requirement under NAICS 541519, consisting of 39 line items from manufacturers such as Prysmian, Panduit, Corning, and Chatsworth. All products must be new, sourced through authorized distribution channels, and listed on the NASA OCIO Approved Products List to ensure compatibility with established network architectures, cybersecurity requirements, and SCIF accreditation standards. The contract will be awarded as a firm-fixed-price agreement to the responsible offeror with the lowest price technically acceptable offer. The procurement is open for full competition, and quotes must be submitted to Cody Guidry by November 9, 2026, at 3:00 PM CST. Offerors must be registered in the System for Award Management and include their CAGE code or Unique Entity ID in their proposal. Delivery is required as soon as possible on an FOB Destination basis to Building 4723 in Huntsville, Alabama. Contractors are required to comply with all U.S. export control laws, including ITAR and EAR, and must follow specific packaging and marking instructions for any supplies accorded duty-free entry.

Other Computer Related Services

POSTED

about 15 hours ago

DEADLINE

INRODES Supplemental RDRE TCA Hardware

Solicitation # 80NSSC27943792Q

NASA/NSSC is seeking the fabrication and post-processing of INRODES Supplemental RDRE TCA Hardware, with performance located at the Marshall Space Flight Center (MSFC). The agency intends to award a sole source contract to Additive Manufacturing Engineering under FAR 12.102(a), as they have been determined the sole provider for this specific hardware. This procurement, categorized under NAICS 332999, follows FAR Part 12 procedures for commercial items. Interested parties were invited to submit capability statements by November 11, 2026, to determine if the procurement should remain non-competitive. The scope of work requires the production of high-quality GRCop-42 alloy hardware using Laser Powder Bed Fusion (PBF) with a specific build volume of 400x400x400 mm. Technical requirements include a minimum as-built density of 99%, the production of monolithic parts in a single continuous build, and a strict post-processing sequence consisting of powder removal, Wire EDM, vacuum nucleation, and Hot Isostatic Pressing (HIP). All GRCop-42 powder must be sourced from Linde Advanced Materials Technologies Inc. or Powder Alloy Corporation. The vendor must be registered with the Directorate of Defense Trade Controls (DDTC), comply with ITAR regulations, and maintain a quality system compliant with AS9100 or ISO9001. Deliverables must be shipped to the MSFC Central Receiving in Huntsville, Alabama, within eight weeks of the build start. The contract mandates a comprehensive build package including process validation data and anomaly reports, and requires that all powder be completely removed from internal and external surfaces to prevent moisture contamination.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

2 Lunar GNSS antennas and 1 hat coupler

Solicitation # 80NSSC27948181Q

The NASA Shared Services Center is seeking the procurement of two Lunar GNSS directional antennas and one hat coupler to support signal acquisition and tracking missions at the Goddard Space Flight Center. This acquisition is being conducted under NAICS code 334220 as a commercial item procurement following FAR Part 12 procedures. NASA intends to award a sole source contract to Haigh-Farr, Inc., as they have been determined to be the sole provider capable of meeting these requirements. The antennas must be specifically designed for the lunar environment, featuring SMA Female connectors and a minimum gain of 15 dBi at boresight, with frequency ranges covering GPS L1 and L5. Rigorous quality and environmental standards are required, including eight cycles of TVAC cycling from -155C to +135C, random vibration testing per GEVS levels, and pre- and post-environmental electrical testing for VSWR and radiation patterns. The successful vendor must provide a Certificate of Conformance and Acceptance Test Data upon delivery. Interested organizations were requested to submit capability statements by November 10, 2026, for the purpose of determining whether to proceed with a competitive procurement.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Scientific Instrument Installation and Training ServicesThis subcontract, titled Scientific Instrument Installation and Training Services, involves the installation, calibration, and operator training for an AP/MALDI source supporting prime contractors on NASA Ames Research Center projects. The selected provider will be responsible for the on-site installation of the MALDI source, the delivery of technical training for NASA personnel, and the creation of comprehensive technical manuals. The primary objective is to deliver a fully operational and calibrated system along with a workforce of trained operators. Final deliverables include a complete set of installation, operator, and maintenance manuals. This effort is managed through the NASA Shared Services Center under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

AP/MALDI Source Hardware SupplyThis subcontract through the NASA Shared Services Center involves the manufacture and delivery of a specialized Atmospheric Pressure Matrix-Assisted Laser Desorption/Ionization source for prime contractors operating on NASA Ames Research Center projects. The hardware must be integrated with a standard Nd:YAG 355 nm laser and feature an X-Y translation stage capable of micrometric spot analysis ranging from 100 to 5 micrometers. The delivered unit must ensure full compatibility with the Thermo Fisher Scientific Orbitrap Exploris 240 and the OptaMax NG interface. This procurement falls under NAICS code 334516 and focuses specifically on the delivery of the physical AP/MALDI source hardware.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

CABLE ASSEMBLY,INTE

Solicitation # N0038327RAA26

Navsup Weapon Systems Support

POSTED

about 15 hours ago

DEADLINE

20--HUB AND CYLINDER AS

Solicitation # N0010424RJC52

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

49--ADAPTER, TEST, HARM, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QLA42

Navsup Weapon Systems Support

POSTED

about 15 hours ago

CLOSED

about 6 hours ago

Fabrication of Rigid Connecting Links (Aluminum Alloy)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture of Shouldered Shafts (NSN 0001S00000053)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture of Shoulder Shaft (NSN 3040007708384)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Machining of Sleeve Bushings (NSN 3120-01-115-3781)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Shaft Manufacturing (NSN 3040011216084)

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Precision Fabrication of Seal 'T' Rods (NSN 5330-01-204-5577)

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Manufacturer of Steel Street Elbows (NSN 4730-01-059-4126)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturer of Steel Tube Caps (NSN 4730013592430)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS