Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Wire Mesh Partitions & Industrial Shelving for WOTC

Active
52600PR260018319Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the installation of metal shelving and wire mesh partitions at the Curtis Bay warehouse in Maryland, specifically to create five secure cages, each measuring 15 feet wide by 12 feet deep and 12 feet high, totaling approximately 135 lineal feet of partitioning. Each cage will be equipped with a 6-foot wide by 10-foot high slide gate featuring pad-eyes for secure padlocking, and programmable combination padlocks will be supplied for each gate. Inside each cage, 10 feet of industrial shelving, 24 inches deep and 10 feet high, will be installed to maximize storage capacity. The project is solicited under the title “Wire Mesh Partitions & Industrial Shelving for WOTC” with solicitation number 52600PR260018319, and responses are due by July 28, 2026. The contracting office is part of the Department of Homeland Security, specifically the Headquarters Contract Operations office in Washington, DC, with Nigel McIntyre listed as the primary point of contact. The work is classified under NAICS code 238390 for other building completion contractors and is open to all eligible bidders without set-aside restrictions.

General Info

Install five secure cages with shelving and slide gates at Curtis Bay warehouse by July 28, 2026, for DHS.

Agency

Department Of Homeland Security → Hq Contract Operations (CG-912)(000View Agency

NAICS

238390 - Other Building Finishing ContractorsView NAICS

Place of Performance

Curtis Bay, MD, 21226, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Hq Contract Operations (CG-912)(000
Contacts1 person available
OfficeWASHINGTON, DC, 20593, USA
Organization / Agency
Department Of Homeland Security → Hq Contract Operations (CG-912)(000
View Agency Profile
Office AddressWASHINGTON, DC, 20593, USA
Contacts
Nigel McIntyre
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

Installation of metal shelving at our warehouse


Partition consisting of approximately 135 lineal feet (12’-0” Height) forming 5 cages approximately 15’-0” wide x 12’-0” deep. Each cage to have a 6’-0” wide x 10’-0” high slide gate (5 required). Each slide gate will be furnished with pad-eyes for padlocking (programmable combination padlocks included). Each cage to have 10’ of industrial shelving 24” deep x 10’-0” high.

Similar Contracts

Same NAICS industry code

NAICS: 238390
New
SLED
General Subcontractor for Interior RestorationThe contract seeks a general subcontractor to coordinate and execute the final interior restoration of a facility located at One Harborside Drive in Boston, Massachusetts, with a zip code of 02128. The scope of work includes the installation of flooring and trim, as well as comprehensive cleanup activities to ensure the space meets final completion standards. The solicitation falls under the NAICS code 238390, categorizing it as other building finishing contractors, and is designated as a subcontract opportunity under the Capital Programs initiative of the Massachusetts agency. Bidders must submit responses by August 26, 2026, at 4:00 PM Eastern Time, following a posting date of July 22, 2026. The place of performance is fixed at the specified Boston location, and no set-aside provisions or organizational type restrictions are indicated. All work must adhere to the contractual requirements for quality and timely completion, with no point of contact information provided in the solicitation.
CAPPROG - Capital Programs

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 238390
New
SLED
Interior Painting and FinishingThe contract titled Interior Painting and Finishing is a subcontract for comprehensive interior painting and final finishes to be performed after the installation of insulation, windows, and drywall. Work is to be completed at the location specified as Luciana Burdi, One Harborside Drive in Boston, Massachusetts, with a ZIP code of 02128. The solicitation is categorized under NAICS code 238390, which pertains to other building finishing contractors. The posted date is July 22, 2026, and all responses must be submitted by the deadline of August 26, 2026, at 4:00 PM Eastern Time. The contracting entity is CAPPROG – Capital Programs under the Massachusetts agency, and the work involves precise coordination with prior construction phases to ensure seamless execution of interior finishes. No set-aside type is designated, and while no point of contact is listed, bidders must refer to the provided UI link for further detail and submission instructions.
CAPPROG - Capital Programs

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 238390
New
SLED
Solicitation #A10-05-26-9252 Adair County Bid #2The Cherokee Nation Housing Authority is soliciting bids for comprehensive repairs across Adair County, Oklahoma, encompassing carpentry, electrical, HVAC, plumbing, paint and finish work, and roofing services. This procurement, identified as Solicitation #A10-05-26-9252 and Procurement #164791, was posted on July 22, 2026, with responses due by August 11, 2026. The work is anticipated to address multiple housing maintenance needs under the agency’s jurisdiction, with all services required to be performed at locations within Adair County. Interested parties must submit their bids through the official procurement portal, with Mike Eppler serving as the primary point of contact for inquiries via email or phone. The solicitation is classified under a SLED entity type, reflecting its state, local, or educational governmental context, and no specific set-aside or NAICS code has been designated for this opportunity.
Cherokee Nation Housing Authority

POSTED

1 day ago

DEADLINE

in 19 days
View Details
NAICS: 238390
New
SLED
Firestopping and Acoustic Sealant InstallationThe contract outlines the installation of red-colored firestopping and acoustic sealants in accordance with UL assemblies, ensuring compliance with recognized fire and sound ratings for building penetrations. The work is scoped as a subcontract under the NAICS code 238390, which encompasses other specialized construction activities, and is being issued by Montgomery County in Pennsylvania. All materials must be installed precisely to meet the performance and safety standards defined by UL listings, with the red coloration serving as a visual indicator of approved firestop applications. The solicitation was posted on July 20, 2026, and responses are due by August 25, 2026, with no set-aside provisions specified. The place of performance and point of contact details are not provided in the data, and the work is expected to occur at locations under Montgomery County’s jurisdiction, though specific project sites are not identified.
Montgomery County Pa

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 238390
New
SLED
Historic Architectural RestorationThis contract pertains to the restoration of historic architectural finishes such as plaster, woodwork, paint, and trim that were disturbed during the installation of HVAC systems. The work requires meticulous attention to detail, ensuring all restored elements precisely match the original materials in composition, texture, color, and finish to maintain historical integrity. Compliance with preservation standards is mandatory, and all efforts must align with established protocols for historic conservation to protect the cultural and architectural value of the affected structures. The contract is structured as a subcontract under NAICS code 238390, indicating it falls under other building finishing contractors. It was posted on July 20, 2026, with a response deadline of August 14, 2026. The contracting entity is the state of Utah, and performance will occur within its jurisdiction, though specific locations are not detailed. Interested parties must submit proposals by the stated deadline to be considered, and the opportunity is accessible via a public online portal linked in the contract data.
Utah

POSTED

2 days ago

DEADLINE

in 23 days
View Details
NAICS: 238390
New
SLED
Painting and Interior FinishesThe contract involves comprehensive interior finishing work for a gym facility, including drywall repair, texturing, priming, and painting across all walls, ceilings, and locker rooms. The work requires precise execution to ensure seamless surface preparation and a uniform, durable finish suitable for high-traffic areas. All tasks must be completed in accordance with industry standards for commercial interior finishes, with attention to detail and proper material application to withstand heavy use and maintain aesthetic quality. This is a subcontract opportunity under NAICS code 238390, posted by the Mississippi Department of Finance and Administration under the agency name MPTAP. Interested parties must submit responses by August 6, 2026, with no set-aside designation specified. The place of performance and exact location details are not provided, but all work is expected to take place at the specified gym facility. Bidders are expected to have the necessary expertise in commercial interior finishes and the ability to coordinate within an active facility environment.
MPTAP

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 238390
New
International
Interior Finishing and PaintingThe contract pertains to interior finishing and painting services for government facilities under the Ministry of National Security in Jamaica, aiming to restore and modernize interior spaces through comprehensive drywall installation, ceiling work, flooring, and painting. All work must meet prevailing standards for durability, aesthetics, and safety, with performance expected across multiple locations under the agency’s jurisdiction. The scope includes all necessary preparations, material supply, labor, cleanup, and final inspections to ensure a seamless and professional outcome. Subcontractors are required to submit responses by August 13, 2026, at 8:00 PM, with a NAICS code of 238390 indicating specialized trade contracting for interior finishes. Participation is open to qualified firms capable of delivering high-quality interior renovation services within the specified timeline. All work must align with government specifications, and any deviations must be pre-approved. The contract is issued as a subcontract under the Government of Jamaica’s electronic procurement portal, and applicants must access the detailed requirements through the provided UI link to ensure full compliance with contractual terms and conditions.
Ministry of National Security

POSTED

3 days ago

DEADLINE

in 22 days
View Details
NAICS: 238390
New
Federal
Repair Siding Sentinel Butte Communication Site
Western-Upper Great Plains Region

POSTED

3 days ago

DEADLINE

in 16 days
View Details
NAICS: 238390
New
SLED
Painting and CoatingsThe contract involves the interior and exterior painting of walls, trim, and common areas within a multi-unit residential building located in Napa, California, with a ZIP code of 94559. Work under this subcontract falls under NAICS code 238390, which pertains to other building completion services, and is intended to ensure the building's surfaces are properly coated for aesthetic, protective, and maintenance purposes. The contract was posted on July 20, 2026, and is managed by the City of Napa under the state of California, though no specific office address or point of contact details are provided. The place of performance is explicitly tied to Napa, and all painting activities must be completed at this location. This subcontract is part of a broader effort to maintain residential property standards and does not specify any set-aside preferences or contracting restrictions. Further details can be accessed via the provided link to the official project portal.
City of Napa

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 238390
New
International
Interior Finishing (Drywall, Painting, Trim)The contract entails interior finishing work across Ontario, excluding the National Capital Region, with scopes covering drywall installation, painting, baseboards, and trim. It is classified as a subcontract under NAICS code 238390 and is issued by the Government of Canada through the Department of the Environment. The solicitation was posted on July 20, 2026, with a response deadline set for August 5, 2026, at 8:00 PM Eastern Time. All work must be performed at locations within the specified geographic area, and no set-aside provisions are designated for this opportunity. Interested parties must submit proposals through the official Canada Buys portal before the deadline to be considered.
Department of the Environment (ECCC )

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 238390
New
SLED
Interior Finishes – Tile, Painting, and PartitionsThe contract involves the installation of wall tile, ceiling grids, acoustical tiles, painting, and new toilet partitions within renovated spaces under the Interior Finishes – Tile, Painting, and Partitions initiative. Work is to be performed across various locations associated with Redford Union Schools in Michigan, with no specific city or zip code designated for performance. The NAICS code 238390 classifies this as other building finishing contractors, indicating specialized interior finishes work. This is a subcontract opportunity, open for responses until July 31, 2026, with solicitation materials posted on July 20, 2026. All work must meet the standards expected for educational facility renovations, focusing on durability, safety, and aesthetics in high-traffic environments. The contract does not specify set-aside status or point of contact, and bidders must reference the provided Michigan state portal link for full details and submission.
Redford Union Schools

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 238390
New
Federal
Repair Siding Sentinel Butte Communication SiteThe U.S. Department of Energy through its Western Upper Great Plains Region is soliciting bids to repair siding at the Sentinel Butte Communication Site, with the solicitation number 89503426QWA001305 posted on July 20, 2026. The response deadline for submissions is August 7, 2026, at 8:30 PM Eastern Time, and the contract is set aside under the Small Business Administration program, targeting qualified small business concerns. The NAICS code 238390 applies to other building completion contractors, indicating this work involves specialized exterior repairs rather than new construction. The contracting officer for this opportunity is Curtis Richter, reachable at richter@wapa.gov, and all correspondence must be directed through the official FedConnect portal. Performance of the work is expected to occur at the Sentinel Butte Communication Site, though the precise location details are not specified beyond the state and region, and the contract office is located in Billings, Montana, with a ZIP code of 59107-5800.
Western Upper Great Plains Region

POSTED

3 days ago

DEADLINE

in 16 days
View Details

More opportunities from Department Of Homeland Security → Hq Contract Operations (CG-912)(000

Same awarding agency

NAICS: 336413
New
Federal
USCG and CBP C-130J Missionization Effort (Minotaur Mission Systems+)The contract seeks qualified sources to provide aircraft modification services for the installation of the USCG-developed and government-owned Minotaur Mission System Suite (MSS+) on newly produced C-130J aircraft operated by the U.S. Coast Guard and Customs and Border Protection. This effort, termed missionization, involves adapting the airframes to integrate the MSS+ to meet operational requirements, with potential inclusion of prototype development and integration solutions to counter diminishing manufacturing sources and material shortages. The project is open to industry partners capable of delivering complex avionics and systems integration under stringent government specifications, with flexibility to address unforeseen technical challenges related to obsolescence and supply chain constraints. The solicitation, identified as 70Z02326RAIRA1000, was posted on July 20, 2026, with responses due by August 20, 2026, and falls under NAICS code 336413 for aircraft manufacturing. No set-aside restrictions apply, making it open to all eligible contractors. The contracting activity is managed by the Department of Homeland Security’s U.S. Coast Guard HQ Contract Operations office located in Washington, D.C., with performance expected to occur in the District of Columbia. Primary point of contact is Andrew Gordon, reachable via email or phone, with Mary Case available for secondary support. All inquiries and submissions must be directed through the designated SAM.gov portal.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 28 days
View Details
NAICS: 5417
New
Federal
High Energy Laser Technologies for Maritime ApplicationsThe United States Coast Guard is seeking information on high energy laser technologies capable of operating in the maritime environment to counter uncrewed aerial systems and uncrewed surface vessels. The request targets directed energy systems including high energy lasers or comparable laser technologies that can incapacitate targets aboard fixed installations, on the move cutters, and small boats, with specific emphasis on systems engineered to withstand harsh maritime conditions such as shock, vibration, salt spray, smoke, and fuel exhaust. Respondents must provide detailed technical specifications including physical dimensions, weight, power and cooling requirements, acquisition and installation cost estimates, as well as laser wavelength, output power, effective area, and operational range. Software capabilities related to target identification, profile databases, and targeting methodologies are also required. All responses must be submitted by August 20, 2026, under solicitation number RFI1824357, which is categorized as a sources-sought notice under NAICS code 5417. The posting was issued on July 20, 2026, by the Department of Homeland Security through the Office of the Coast Guard’s Contract Operations (CG-912) located in Washington, D.C., with performance expected in Connecticut. Point of contact for inquiries is Kiemisha Sweetney, reachable via email at smb-comdt-coco31acquisitions@uscg.mil. This RFI seeks to assess industry capabilities to inform future procurement decisions, with no obligation to award a contract as part of this solicitation.
Scientific Research and Development Services

POSTED

3 days ago

DEADLINE

in 29 days
View Details
NAICS: 333310
New
Federal
U. S. Coast Guard MH-60T Jayhawk Helicopter Advanced Aircrew Training SystemsThe United States Coast Guard is soliciting proposals under RFP No. 70Z02326R93150001 for the design, fabrication, delivery, installation, and support of three advanced training systems: one MH-60T Level 7 Flight Training Device, one Hoist Mission Training System, and one Portable Hoist Mission Training System. This is a Firm Fixed Price requirement issued as a total small business set-aside under NAICS code 333310 with a business size standard of 1,000 employees and PSC 6910 for training aids. The solicitation, issued in accordance with FAR Part 12 and supplemented by FAR Part 15 procedures, mandates full contractor responsibility for program management, system integration, documentation, training, warranty, and logistics. The final delivery and installation point is the USCG Aviation Training Center in Mobile, Alabama, with all hardware shipped F.O.B. destination, making the Contractor solely liable for preservation, packaging, and transit risks. Packaging must conform to MIL-STD-2073-1 and MIL-STD-129, with specific protections for ESD-sensitive components and structural assemblies using static-shielding bags, custom crates, and shock-absorbing materials. Each shipment must include properly marked containers with contract number, CLIN, nomenclature, serial number, quantity, and both ship-to and ship-from addresses, along with waterproof packing lists inside and outside each container. A Logistics Support Plan (CDRL A011) is required to detail packaging, shipping, storage, and deployment procedures. Proposals must be submitted in three volumes—Technical Approach and Corporate Experience in Volume I, Past Performance in Volume II, and Price in Volume III—with strict formatting requirements including a 10-page limit for the technical approach, a 25-page maximum for experience and performance submissions, and a minimum 11-point font. The proposal submission deadline has been extended to August 3, 2026, at 12:00 PM ET, with questions due by July 21, 2026. Evaluation will be based on a best-value tradeoff where technical approach, corporate experience, and past performance are equal and significantly more important than price, allowing award to a higher-priced offeror if technical superiority or reduced risk justifies the cost. All proposals must be emailed to Sharita Leathers and William Prebble, and must include a Unique
Commercial and Service Industry Machinery Manufacturing

POSTED

6 days ago

DEADLINE

in 11 days
View Details
NAICS: 333923
Federal
Foreign Military Sales (FMS) El Salvador 200-Ton Mobile Boat Hoist (ZB-P-LAF)The U.S. Department of Homeland Security, through the Office of Contract Operations, is seeking qualified small businesses to fulfill a Foreign Military Sales requirement for a 200-ton mobile boat hoist under LOA Case Number ZB-P-LAF between the United States and the Government of El Salvador. This solicitation, identified as 70Z02326Q92200004, is a total small business set-aside under FAR 19.5 and falls under NAICS code 333923 for overhead traveling crane, hoist, and monorail system manufacturing. The government plans to award a single firm-fixed price purchase order without negotiation, selecting the most responsive offer based on initial submissions. All interested vendors must carefully review the Statement of Work, Pricing Schedule, Contract Clauses, and Solicitation Provisions to ensure full compliance. Proposals must be submitted by 6:00 PM ET on August 17, 2026, and any questions regarding the solicitation must be directed to Kerri L. Dolezal at Kerri.L.Dolezal@uscg.mil no later than 2:00 PM ET on July 31, 2026, with responses to inquiries published as amendments. This requirement has no incumbent contractor and is being issued under the latest federal acquisition guidelines, including revisions from Federal Acquisition Circular 2026-01 and ongoing Revolutionary FAR Overhaul updates. The place of performance is overseas, and the contract is administered under the Foreign Military Sales program, with all terms and conditions governed by U.S. federal procurement regulations.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

8 days ago

DEADLINE

in 25 days
View Details
NAICS: 322220
Federal
Sulfide-Free Fiberboard Scabbard Liner SupplyThe contract requires the supply of sulfide-free fiberboard liners designed to prevent blade corrosion within scabbards, ensuring long-term protection of blades in storage or transport. The effort is classified as a subcontract under a Total Small Business Set-Aside, specifically reserved for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 322220 indicating the primary industry focus on paperboard container manufacturing. The opportunity was posted on July 13, 2026, and responses are due by August 7, 2026, at 8:59 PM. Performance is expected to be carried out at a location with a zip code of 06320, though the exact city and state are not specified. The contracting activity is managed by the Department of Homeland Security through its HQ Contract Operations office.
Paper Bag and Coated and Treated Paper Manufacturing

POSTED

10 days ago

DEADLINE

in 16 days
View Details
NAICS: 339992
Federal
Blade and Guard Engraving/MarkingThe contract requires precise engraving and marking of a blade and guard with specific maritime design elements, including the engraving of “USCG” and a maritime star on the blade, integration of “USCG” into the guard grille, and application of ornamental patterns on the scabbard bands, all to meet exacting standards of detail and durability. The project is classified as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 339992 for other fabricated metal product manufacturing. The solicitation was posted on July 13, 2026, with responses due by August 7, 2026, at 8:59 PM Eastern Time, and performance is required at a location with zip code 06320. The contracting activity is managed by the Department of Homeland Security through its Headquarters Contract Operations office, with no specific point of contact listed, and further details are accessible via the SAM.gov workspace link provided.
Musical Instrument Manufacturing

POSTED

10 days ago

DEADLINE

in 16 days
View Details
NAICS: 313310
Federal
Cotton Flannelette Sword Case ProductionThe contract calls for the manufacture of sword cases in gray, silver, and dark blue cotton flannelette featuring a napped interior and a precise thread count, ensuring both durability and a refined finish. Production must adhere to exacting textile specifications to meet functional and aesthetic standards required for military or ceremonial use. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the Small Business Administration, with the NAICS code 313310 indicating classification within the textile mill product manufacturing sector. All responses are due by August 7, 2026, and performance is expected to be carried out at a location with a ZIP code of 06320. The contracting activity falls under the Department of Homeland Security, specifically Hq Contract Operations (CG-912), and the opportunity was posted on July 13, 2026. Participation requires full compliance with small business eligibility rules and the ability to deliver products that meet detailed material and construction criteria without deviation. The contract does not provide a point of contact or detailed office address, and interested parties must refer to the official SAM.gov listing for further submission instructions.
Textile and Fabric Finishing Mills

POSTED

10 days ago

DEADLINE

in 16 days
View Details
NAICS: 316999
Federal
Sword Grip Manufacturing (Sharkskin or Synthetic)The contract requires the manufacture of sword grips using either bleached sharkskin or white pebble thermo-set plastic, with precisely 13 gold-wire bands installed, allowing a tolerance of plus or minus one band. The work must comply with strict material specifications to ensure uniformity and quality, and the production process must adhere to defined standards for durability and aesthetic consistency. This is a subcontract opportunity designated as a total small business set-aside under the SBA program, meaning only small businesses are eligible to compete, ensuring support for small business growth within the federal contracting ecosystem. The North American Industry Classification System code 316999 categorizes this effort under other miscellaneous textile product mills, indicating the nature of the manufacturing process involves specialized material transformation and finishing. The opportunity was posted on July 13, 2026, with a response deadline of August 7, 2026, and place of performance is specified as zip code 06320. The contracting entity is the Department of Homeland Security through its HQ Contract Operations office, though no point of contact or full address details are provided. Interested bidders must respond through the official SAM.gov portal linked in the contract data.
All Other Leather Good and Allied Product Manufacturing

POSTED

10 days ago

DEADLINE

in 16 days
View Details
NAICS: 316999
Federal
Leather Scabbard Covering and AssemblyThe contract seeks the covering of scabbard bodies with full-grain black calfskin or morocco leather, requiring precise adherence to thickness standards and resistance to crocking to ensure durability and performance under operational conditions. All materials must meet established quality benchmarks without compromise, and the work involves precise assembly techniques to integrate the leather covering securely onto the scabbard structure. The requirement is part of a Total Small Business Set-Aside under the SBA program, with the NAICS code 316999 indicating it falls under other textile product mills, and is intended exclusively for small business competitors. The response deadline is August 7, 2026, at 8:59 PM, and performance is to be completed at a location with the zip code 06320. The contracting entity is the Department of Homeland Security through its HQ Contract Operations office, and the opportunity was posted on July 13, 2026.
All Other Leather Good and Allied Product Manufacturing

POSTED

10 days ago

DEADLINE

in 16 days
View Details
NAICS: 332813
Federal
Bronze and Gold-Plated Fittings FabricationThe contract seeks fabrication of bronze and gold-plated fittings including scabbard bands, mounts, and guards, where materials must be either cast bronze or stamped metal and finished with a 24k gold plating to meet precise dimensional specifications and detailed engraving standards. All components must adhere to exacting quality controls to ensure uniformity, durability, and aesthetic precision consistent with historical or ceremonial requirements. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 332813 corresponding to metallic forging and stamping. The opportunity was posted on July 13, 2026, with a response deadline of August 7, 2026, at 8:59 PM Eastern Time. Performance will be delivered to a location with a zip code of 06320, under the oversight of the Department of Homeland Security, specifically the Hq Contract Operations (CG-912) office. The solicitation does not include a solicitation number and lacks details on a point of contact, but interested parties may access additional information through the provided SAM.gov link. All proposals must demonstrate capability in metallurgical fabrication, plating precision, and adherence to intricate design specifications.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

10 days ago

DEADLINE

in 16 days
View Details
NAICS: 332215
Federal
Stainless Steel Blade ManufacturingThe contract calls for the manufacture of stainless steel ceremonial sword blades with a minimum chromium content of 12 percent, requiring a bright, polished finish without any additional coatings or surface treatments. The product must meet precise metallurgical and aesthetic standards to ensure durability and visual clarity appropriate for ceremonial use. All work must be performed by a small business, as this is a total small business set-aside under SBA guidelines, with the NAICS code 332215 indicating the specific classification for forged steel product manufacturing. The opportunity was posted on July 13, 2026, and responses are due by August 7, 2026, with performance expected to occur at a location with a zip code of 06320. The contracting activity is under the Department of Homeland Security’s Headquarters Contract Operations office, though no point of contact or detailed address information is provided.
Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

10 days ago

DEADLINE

in 16 days
View Details
NAICS: 332215
Federal
High-Carbon Tool Steel Blade ManufacturingThe contract calls for the manufacture of ceremonial sword blades using high-carbon tool steel, with precise specifications requiring hardening to a Rockwell C 48–53 hardness range, followed by chromium plating and a high-gloss polished finish free of defects. The work must meet strict quality standards to ensure both durability and aesthetic precision, suitable for ceremonial use. All production must comply with the NAICS code 332215, which pertains to forged and stamped metal product manufacturing, and is designated as a Total Small Business Set-Aside under SBA guidelines, restricting eligibility exclusively to small businesses. The solicitation was posted on July 13, 2026, with a response deadline of August 7, 2026, by 8:59 p.m. EST. Performance will be carried out at a location with ZIP code 06320, though no specific city or state is outlined. The contracting agency is the Department of Homeland Security under the Hq Contract Operations (CG-912) office. The opportunity is structured as a subcontract and remains open for small business proposals only, with no point of contact details provided in the public data. Interested parties must submit responses through the SAM.gov portal before the deadline to be considered.
Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

10 days ago

DEADLINE

in 16 days
View Details