Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WIRE ROPE ASSEMBLY, SIN

Active
SPE4A5-26-T-299KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of a single-leg wire rope assembly, identified by part number 35-12055-36 and NSN 4010-00-775-3323, with a quantity of 13 units required under solicitation SPE4A5-26-T-299K. The item is designated as a critical application item for The Boeing Company and must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards. The procurement mandates adherence to stringent packaging directives under ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement. The unit of issue is each, with no variance allowed in quantity. Delivery is FOB origin with inspection and acceptance occurring at destination, and the required delivery window is 171 days from the contract award, with a need ship date of January 17, 2027, and an original delivery deadline of July 15, 2028. Cybersecurity compliance is mandated at CMMC Level 2 through self-assessment, and source approval documentation must be provided. Item Unique Identification is not required per customer request, and any non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified, and all measuring and test equipment must be properly calibrated. All shipments must be sent to the designated DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics are governed by specific DLA procedural notes.

General Info

Procure 13 wire rope assemblies, part 35-12055-36, FOB origin, delivery by Jan 17, 2027, CMMC Level 2, DLA packaging, zero defects.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Leon Watson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRE ROPE ASSEMBLY,SINGLE LEG
WIRE ROPE ASSEMBLY,
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 82918 P/N 25-8619-38
SPE4A5-26-T-299K
SECTION B
THE BOEING COMPANY 81205 P/N 35-12055-36
THE BOEING COMPANY 82918 P/N 35-12055-36
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017572007 0001 EA 13.000
NSN/MATERIAL:4010007753323
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A5-26-T-299K
SECTION B
PR: 7017572007 PRLI: 0001 CONT’D
Need Ship Date:01/17/2027 Original Required Delivery Date:07/15/2028
SPE4A5-26-T-299K NSN/Part Number: 4010-00-775-3323 Quantity: 13 EA Purchase Request: 7017572007QTY: 13 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
ARM, EMERGENCY ESCAPEThe contract pertains to the procurement of 20 units of an ARM, EMERGENCY ESCAPE item identified by NSN 1560-00-333-6710, with a delivery requirement of 171 days after award. Manufacturing must be accomplished via a forging process, necessitating specialized tooling, and sourcing inquiries for tooling, materials, or production support must be directed to designated DLA supply chain teams based on application domain—Aviation or Land & Maritime. The item is subject to stringent quality standards under SAE AS9100, along with specific packaging requirements per RP001 and strict compliance for measuring and test equipment under RT001. Documentation for source approval must adhere to RC001, and physical identification and bare item marking must comply with RQ017. The technical data associated with this item is controlled under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior government authorization, and only DLA contractors with approved JCP certification, completed training, and DLA authorization may access the data. Cybersecurity compliance at CMMC Level 2 is required through a certified third-party assessment organization under RD005. The solicitation number is SPE4A7-26-T-584L, with a response deadline of July 29, 2026, and the performance location is Tinker AFB, Oklahoma. Primary point of contact is Mahlon Marcus at the Defense Logistics Agency.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL COMThis contract, issued under solicitation SPE4A6-26-T-08PJ, is for the procurement of four units of a structural component for aircraft, identified by NSN 1560016894017 and part number 70500-02070-158, supplied by SIKORSKY AIRCRAFT CORPORATION (CAGE 78286). The item is classified as a critical application component and is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Packaging must comply with DLA Directive RP001 and MIL-STD-129, with hazardous materials adhering to FED-STD-313 and IP025, while non-hazardous items must meet DLA’s packaging standards. Supply chain traceability documentation must be retained by the contractor per DLAD Procurement Note C03, though item unique identification is not required per customer preference. Delivery is set for 171 days after contract award, with FOB origin terms and inspection and acceptance occurring at the destination, DLA Distribution Jacksonville. The contract enforces zero variance in quantity and mandates compliance with SIKORSKY’s approved sampling plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. A Certificate of Conformance is authorized unless overridden by a quality assurance letter. The supplier must also complete a CMMC Level 2 self-assessment to meet cybersecurity requirements. All shipments must be palletized per DLA guidelines and addressed to the specified logistics point with the designated point of contact, Tyana Anderson. The original required delivery date is August 15, 2027, with a need ship date of January 17, 2027, and the contract is governed by the technical and administrative controls applicable to Department of Defense procurements.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FITTING, BREAKAWAYThe contract pertains to the procurement of 12 units of a breakaway fitting identified by NSN 1560-01-148-1719 under solicitation SPE4A5-26-T-299Y, with a delivery deadline of 171 days after award. The acquisition is structured as a total small business set-aside under NAICS code 336413, managed by the Department of Defense through the ASC Supplier Operations OEM Division. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or award date for simplified acquisitions. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, but item unique identification is explicitly not required per the service customer’s directive. Measuring and test equipment must meet specified standards, and documentation for source approval is mandatory. The place of performance is New Cumberland, Pennsylvania, with Kirstie Ragsdale as the primary point of contact. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
BRACKET, LIGHT RETENThe contract pertains to the procurement of 40 units and 140 units of a light retention bracket, identified by NSN 6220-01-631-4413 and part number 2614833C1, under solicitation SPE8E7-26-T-3370. Delivery is required within five days of shipment, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance occur at the destination, with all packaging and labeling strictly governed by MIL-STD-129 and DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, while hazardous materials must comply with TQ requirement IP025 per FED-STD-313. Palletization must adhere to RP001 DLA Packaging Requirements, and each unit pack must contain exactly one item. The items are to be delivered to the U.S. Army SSA W58MKR in Zaczernie, Poland, with shipment tracked via RDD E and referenced DLA procedural notes. The first delivery is due by July 21, 2026, and the second by July 22, 2026, with unit prices of $40.00 and $140.00 respectively, totaling $2,000 and $19,600. The contract references mandatory technical and quality standards from the DLA Master List accessible online, and all documentation and unit of issue compliance must align with DoD standards as defined in official DLA resources.
Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
CYLINDER ASSEMBLY, AThe contract is for one cylinder assembly, actuating, linear, with part number 1FA10038-1 and NSN 1650-01-388-4903, sourced from Triumph Actuation Systems LLC, CAGE 26437. The item is classified as a critical application requiring strict adherence to DLA’s Master List of Technical and Quality Requirements, which take precedence over all other standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by RP001, and all markings and labeling must follow military specifications. Zero defect acceptance is mandated under MIL-Std-1916 or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No unit identification is required per customer request, and deviation or waiver requests must follow formal configuration change management procedures. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the single unit must be delivered within 171 days from the contract date to the specified receiving warehouse in Tracy, California. The original required delivery date is March 4, 2027, with a needed ship date of January 17, 2027. Pricing is fixed at $1.00 per unit, and no quantity variance is permitted. The solicitation number is SPE4A7-26-T-584S, issued under NAICS 336413, with contractual obligations binding to the DLA Master List revisions effective as of the solicitation issue date.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
WEIGHT, WHEEL BALANCThe contract pertains to the procurement of Wheel Balancing Weights, identified by NSN 1630-01-281-8724 and part number 2609689 from Honeywell International Inc., with a quantity of 265 units. It is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List revision in effect on the solicitation issue date, and all inspections must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified. Critical attributes are subject to verification level VII, major to IV, and minor to II, with AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application item, and though Unique Item Identification is not required, physical marking per RQ017 is mandatory. Delivery is FOB origin with a 171-day lead time, and acceptance is at destination. Packaging must adhere to MIL-STD-129 and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous, with palletization in compliance with DLA Packaging Requirements. The required delivery date is March 2, 2027, with a ship date of January 17, 2027. All shipments must be sent to the DLA San Joaquin receiving warehouse in Tracy, CA, and transportation procedures must follow DLAD Proc Notes C19 and C20. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and covered defense information is subject to strict handling protocols. The contract is managed by the Department of Defense under solicitation number SPE4A5-26-T-300F, with Dominique Howard as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FAN, CENTRIFUGALThis contract is for the procurement of 31 centrifugal fans, identified by NSN 1660-01-571-5624 and part number R4-L2R-20AC-GP, under solicitation SPE4A7-26-T-584Z. The items must comply with all applicable DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951 for packaging. Packaging and labeling must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and unit packaging as specified. Inspection and acceptance occur at the destination, and no quantity variance is permitted. Delivery is required within 171 days from the contract date, with the original delivery deadline set for June 6, 2027, and the need ship date of January 17, 2027. The product must be delivered FOB origin to the specified warehouse at Tracy, California, with transportation governed by DLAD Proc Notes C19 and C20. The contract enforces strict quality control under MIL-STD-1916 or equivalent zero-based sampling plans, with attributes classified as critical, major, or minor assigned verification levels or AQLs accordingly, and non-conformances not permitted unless specifically allowed. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and all government identification must be removed from non-accepted supplies. The unit of issue is each, priced at $31.00 per unit, for a total contract value of $961. Compliance with DoD authorized units of issue and ANSI X12 equivalency is required. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Amber Wells as the primary point of contact. All technical and quality criteria referenced by R or I numbers are incorporated by reference from the DLA Master List, and the version in effect on the solicitation issue date controls compliance.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FITTING, CARRIAGE, INThe contract pertains to the procurement of three Fitting, Carriage, IN units, manufactured via a forging process requiring specialized tooling. The item is identified by NSN 1560-00-602-4422 and is part of a Women-Owned Small Business Set-Aside solicitation under DLA contract number SPE4A7-26-T-585V, with a response deadline of July 29, 2026, and a delivery requirement of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with configuration control, inspection at origin, and supplier qualification governed by established DLA protocols including Qualified Products and Manufacturers Lists. Export-controlled technical data associated with this item falls under ITAR or EAR regulations, restricting disclosure to foreign persons without prior authorization and limiting access to contractors with approved US/Canada Joint Certification Program status, completed DLA training, and formal authorization. Item Unique Identification is waived per customer request. Packaging, cybersecurity certification at CMMC Level 2, and documentation for source approval submissions are mandatory. Performance is designated at Tinker AFB, Oklahoma, and all bidders must comply with DLA’s documentation and supply chain protocols, including the handling of covered defense information and adherence to engineering change management procedures.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
HEADREST, SEAT, AIRCRIPECO HOLDINGS LIMITED, with CAGE code K9075, is contracted to supply four headrest units, part number 0A066-0049AJ, for use in aircraft seating systems under solicitation SPE4A7-26-T-587D. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, incorporating specific controls identified by R and I numbers, with packaging, inspection, and quality assurance governed by MIL-STD-129, ASTM D3951, and RP001 DLA Packaging Requirements, all of which override general industry standards. Acceptance must occur at origin with zero nonconformances expected under the zero-based sampling rules of MIL-STD-1916 or ASQ H1331, and all attributes are to be classified with verification levels or AQLs as defined, unless otherwise specified. Unit of issue is each (EA), with no tolerance for quantity variance, and delivery is FOB origin with a required delivery date of February 8, 2027, and a need ship date of January 17, 2027, giving a 171-day lead time. The item is identified by NSN 1680-99-290-6224, and although Item Unique Identification is not required per customer request, all packaging and marking must comply fully with DLA directives. The sole delivery point is DLA Distribution Warner Robins, Building 376, Robins AFB, Georgia, and the procurement is subject to all applicable DLA procedural notes for transportation and freight.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
ADAPTER, PRESSURE FU
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
RESISTOR, THERMAL
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
AVIATION SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
TAPE, DRIVE, RETICLEThe contract solicitation is for 178 units of TAPE, DRIVE, RETICLE with NSN 1430-01-318-3414, under solicitation number SPE4A5-26-T-302G, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The requirement is governed by a suite of technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on the acquisition size. The item is subject to specific packaging standards, documentation mandates for source approval, and the mandatory removal of government identification from non-accepted supplies. Physical identification and marking of the bare item are required, though Item Unique Identification is not mandated per the service customer’s instruction. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals located in the U.S. or overseas, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed mandatory DLA training on export-controlled data handling, and formal approval from the DLA controlling authority. Delivery is required within 171 days after award, with performance to occur in New Cumberland, Pennsylvania, 17070-5002. The solicitation closes on July 29, 2026, and the NAICS code is 336415. All correspondence and inquiries should be directed to Rasulbek Kilichev at the provided contact information.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract is for a spacer sleeve item with part number 741073CL13 and NSN 5365016879226, under solicitation SPE4A5-26-T-302M, requiring delivery of one unit within five days to Fort Irwin, California. The item is classified as a critical application and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking specifications per MIL-STD-129. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and the item must not bear government identification if not accepted. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels based on criticality. FAA airworthiness approval is mandated via CDRL RQ019, and preservation, packaging, and marking adhere to DLA and FAA-specific rules. The item must be shipped via the fastest traceable means, excluding parcel post, with delivery FOB origin and inspection and acceptance taking place at destination. The contract includes no quantity variance and specifies no unique item identification per customer request. The supplier, RTX Corporation, must meet all technical data package requirements referenced in QAP 13873, with an expiration of the contract data requirement set for January 14, 2025, and the required delivery date is July 15, 2026.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
GIMBAL AND BRACKETThe contract specifies the procurement of three Gimbals and Brackets with part number 1878032 and NSN 6605-00-089-9500 under solicitation SPE4A5-26-T-299F, with a total contract value of $9.00 and a delivery requirement of 171 days from award, to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with MIL-STD-2073-1E for preservation and packaging, MIL-STD-129 for marking, and DLA packaging requirements, with no special marking required and no palletization beyond standard practices. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The contract references technical and quality standards from the DLA Master List, mandates zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, and assigns verification levels of VII, IV, and II for critical, major, and minor attributes respectively. The supplier must adhere to CMMC Level 2 cybersecurity self-assessment requirements, implement configuration change management procedures, and prohibit the intentional use of mercury or mercury-containing compounds in any component, preservation, packaging, or marking, except for specific exempted applications defined by NAVSEA which must include secondary containment. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i), and all supplies must be cleared of government identification if not accepted. The original required delivery date is March 10, 2027, with a need ship date of January 17, 2027.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
PYROMETER, INDICATINGThe contract pertains to the procurement of one indicating pyrometer, identified by NSN 6685-01-350-9216 and part number 4200-001-001, supplied by King Nutronics Corporation as a commercial off-the-shelf item. Delivery is required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no quantity variance permitted. The item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special markings required. Packaging and preservation must adhere to DLA requirements and explicitly prohibit the use of mercury or mercury compounds in any form during preservation, packaging, or marking, except for functional uses in specific instruments or batteries as outlined by NAVSEA. Mercury-containing portable lamps and instruments must include shockproof design and a secondary containment boundary. The supplier must provide Safety Data Sheets aligned with OSHA’s revised Hazard Communication Standard and conforming labels per 29 C.F.R. 1910.1200, and ensure employee training on these requirements. Inspection and acceptance occur at the destination, with no need for item unique identification. The contract was issued under solicitation SPE4A5-26-T-301F, with a response deadline of July 29, 2026, and a required ship date of January 17, 2027.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325998
New
DIBBS
SCALE REMOVING COMPThe contract specifies the procurement of a scale removing compound identified by NSN 6850-12-382-7353 and commercial part number 56.00.562, supplied in container units with each container holding 100 tabs for a total of 150 tabs per container. A total of 216 containers are required to be delivered FOB destination within 144 days of contract award, with no tolerance for quantity variance. The product is classified as a commercial off-the-shelf item, and original manufacturer commercial packaging is mandatory—repackaging is prohibited. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code ZZ for unique requirements, and palletization must adhere to DLA packaging standards. The supplier must provide GHS-compliant Safety Data Sheets and approved product labels, which must be reviewed and approved by technical personnel before contract award, with copies submitted to the DLA Aviation HMIRS office. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. The material has no shelf life restriction. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, CA, with transportation governed by DLA procedural notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 325998, with a response deadline of July 29, 2026, and an award expected under contract number SPE4A5-26-T-301W.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, COMPOUND PRESSThis contract specifies the procurement of a GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATOR with NSN 6685011318107 and part number SC4MC30CWRCNA, under solicitation SPE4A5-26-T-301Z, with a total quantity of 125 units to be delivered FOB origin within 219 days. The item is classified as a critical application item and must comply with technical specifications outlined in MIL-G-18997E and quality assurance procedures QAP-106. Mandatory adherence to DLA packaging requirements, MIL-STD-2073-1E preservation methods, and MIL-STD-129 marking standards is required, including special marking as a delicate instrument. Mercury and mercury compounds are strictly prohibited in all phases of manufacturing, packaging, and preservation except for specific functional uses such as batteries, lighting, or instruments approved by NAVSEA, and portable devices containing mercury must include shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with no quantity variance permitted. Item Unique Identification is not required per the Service customer’s request. A separate first article test line item is included with one unit designated for testing; pricing for this line item is required, but no award will be made if the test is waived. The contract is a total small business set-aside under NAICS 334519, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must comply with all referenced technical, quality, and environmental restrictions set forth in the DLA Master List of Requirements, and transportation logistics follow DLAD Proc Note C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVEDThis contract specifies the procurement of a grooved coupling and clamp, identified by NSN 5340-01-714-1224 and part number NV1021906T001, for a quantity of three units under solicitation SPE4A5-26-T-298B. The item is classified as a critical application item supplied by Hamilton Sundstrand Corporation and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging, marking, and inspection standards set by MIL-STD-2073-1E and MIL-STD-129. All packaging and preservation methods must adhere to DLA’s RP001 guidelines, prohibiting the use of mercury or mercury-containing compounds in preservation, packaging, or marking, with specific exceptions for functional uses in batteries, instruments, sensors, and weapon systems as defined by NAVSEA. Mercury-containing portable lamps and instruments must include a secondary containment boundary and be shock-proof in compliance with NAVSEA 5100-003D. Delivery is required FOB origin within 171 days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates strict adherence to DLA packaging and marking procedures, with no special marking required and palletization conforming to DLA standards. The delivery deadline is January 17, 2027, with the original required delivery date set for January 17, 2028. All shipments must be addressed to the DLA Distribution facility at DDSP New Cumberland and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract was posted on July 21, 2026, with responses due by July 29, 2026, under NAICS code 332510 for industrial machinery manufacturing.
Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, TANGThe contract is for a single washer, tang, identified by NSN 5310-00-089-4828, under solicitation SPE4A5-26-T-301L, with a required delivery within 20 days after award. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date based on acquisition size. Packaging must comply with DLA standards, non-accepted supplies must have government identification removed, and bare items must be physically marked as required. Sampling inspection follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances mandated unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All unspecified attributes are treated as major. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, and performance is to be delivered to JBPHH, HI, 96853-1801. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with Anthony Nickens listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
STATOR ASSEMBLYThe contract pertains to the procurement of 102 units of a stator assembly identified by NSN 1630-01-320-6510 and part number 59002936-001 manufactured by Honeywell International Inc. The item is designated as a Critical Safety Item and a Critical Application Item, triggering stringent inspection requirements including 100% verification of critical characteristics such as dimensional tolerances of .001 inch or less, surface finishes of 16 RMS or finer, geometric tolerances of .002 inch or less, Class 3 or higher threads, angular tolerances of 1 degree or tighter, hardness, material certifications, dynamic and static balancing, special processes like welding and plating, heat treatment, and more. All items must be marked in compliance with MIL-STD-129, including contractor and actual manufacturer CAGE codes, part number, lot, and serial number if available, with no unit identification required per the service customer’s request. The contract mandates adherence to SAE AS9100 quality standards and requires a CMMC Level 2 Self-Assessment for cybersecurity compliance. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, and all documentation must satisfy DLA’s packaging and procurement requirements under RP001 and MIL-STD-2073-1E. The item is classified as a commercial item with no shelf life and is subject to a firm fixed price with no variance permitted in quantity. Inspection and acceptance occur at origin, with delivery due 620 days after award, shipped to DLA Distribution in San Diego under FOB origin terms. Waivers or deviations require explicit approval from the DSC Contracting Officer.
Precision Turned Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334513
New
DIBBS
INDICATOR, RATE OF FThe contract pertains to the procurement of one unit of an indicator with a rate of flow, identified by part number FT-32AEYS-LEAS4072 and NSN 6680015378621, issued under solicitation SPE4A5-26-T-298N. Delivery is required within 171 days from the contract date, with a required delivery date of November 28, 2026, and a need ship date of January 17, 2027. The item must be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and marking strictly following these guidelines. Sampling and verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical attributes are defined with verification levels or AQLs as mandated. The product is classified as a Critical Application Item and must have all government identification removed if non-accepted, with bare item marking as required by RQ017. Covered Defense Information applies, and all documentation must align with referenced DLA directives. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details