Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WIRE ROPE ASSEMBLY,

Active
SPE4A6-26-T-843SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation for the procurement of two wire rope assemblies, identified by NSN 4010-01-653-2993 and Boeing part number 418W1080-1. The items are designated as critical application components and must comply with FAA airworthiness approval and bare item marking requirements. The procurement is managed by the DLA Aviation ASC Commodities Division, with a required delivery date of June 24, 2026, and a delivery timeframe of 110 days after order. The contractor must adhere to strict quality and traceability standards, including the retention of supply chain documentation per DLA Directive Procurement Note C03 and compliance with Proc Note L32 for high-level quality requirements. Sampling and inspection shall follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging and marking must align with MIL-STD-2073-1E and MIL-STD-129, with final delivery to the DLA Distribution New Cumberland facility in Pennsylvania.

General Info

Procurement of two critical Boeing wire rope assemblies due June 24, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

314994 - Rope, Cordage, Twine, Tire Cord, and Tire Fabric MillsView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPEA46-26-T-843S Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Katisha Carter
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRE ROPE ASSEMBLY,
WIRE ROPE ASSEMBLY<(>,<)>
Refer to Proc Note L32 for higher level quality requirements.
RQ046: FAA Bare Item Marking Requirements RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
INCLUDE RQ011 OBJECT TEXT ID ST
INCLUDE RP003 OBJECT TEXT ID ST
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. RQ019: Federal Aviation Administration (FAA) Airworthiness Approval RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
SPE4A6-26-T-843S
SECTION B
THE BOEING COMPANY 81205 P/N 418W1080-1
IAW REFERENCE QAP 13873 CDRL-FAACERTCOM-25015
REVISION NR DTD 01/14/2025
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015688987 0001 EA 2.000
NSN/MATERIAL:4010016532993
DELIVERY (IN DAYS):0110
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
SPE4A6-26-T-843S
SECTION B
PR: 7015688987 PRLI: 0001 CONT’D
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:06/24/2026 Original Required Delivery Date:06/24/2026
SPE4A6-26-T-843S NSN/Part Number: 4010-01-653-2993 Quantity: 2 EA Purchase Request: 7015688987QTY: 2 Delivery: 110 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 314994
New
DIBBS
ROPE, FIBROUS
Solicitation # SPE86-26-Q-0736
This procurement is for fibrous manila rope, specifically Type M, Class 2, with a 3/4 inch circumference and a standard lay. The total quantity consists of 64 coils, with each coil measuring 2,750 feet. The material must be mildew resistant and treated according to T-T-616B. The items have a non-extendable shelf life of 36 months and must be delivered within 175 days after the order. The contract specifies strict quality and packaging standards, requiring compliance with MIL-STD-129 for marking and RP001 for palletization. Sampling must follow MIL-STD-1916 or ASQ H1331, and the use of plastics for wrapping or cushioning should be avoided whenever possible. Deliveries are split between DLA Distribution Jacksonville and DLA Distribution San Joaquin, with inspection and acceptance occurring at the destination. Product verification may be satisfied via a Certificate of Quality Compliance.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 314994
New
DIBBS
CHAIN, WELDLESS
Solicitation # SPE4A5-26-T-398G
This contract is for the procurement of two units of weldless chain, identified as a commercial off the shelf critical application item. The order specifies part number 55901 from Perfection Chain Products Inc or part number 3607T24 from McMaster-Carr Supply Co, under NSN 4010016860476. Delivery is required within 20 days, with the original required delivery date set for August 25, 2026. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for physical identification, measuring and test equipment, and packaging. Supplies must be packaged according to ASTM D3951 and labeled per MIL-STD-129, with palletization following DLA procurement requirements. Inspection and acceptance will occur at the origin, and the items are to be shipped via the fastest traceable means to the USA Dep Tobyhanna in Pennsylvania.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 314994
New
DIBBS
CORD ASSEMBLY, ELASTIC
Solicitation # SPE8EE-26-T-2429
This contract is for the procurement of 75 units of elastic cord assemblies under solicitation SPE8EE-26-T-2429. The items are identified by NSN 4020-01-463-8181 and must be manufactured according to technical data package specifications and basic drawing 19207 12450217. Delivery is required within 140 days after order, with a required delivery date of August 31, 2026, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information requirements. Inspection and acceptance will take place at the destination, and certificate of conformance procedures are authorized.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 314994
New
DIBBS
FIBER ROPE ASSEMBLY, SI
Solicitation # SPE8EE-26-Q-0452
This solicitation, numbered SPE8EE-26-Q-0452, is issued by the Department of Defense for the procurement of 1,267 units of Fiber Rope Assembly under NSN 4020-01-609-8922. The contract requires delivery within 120 days after order and mandates strict adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. The agreement includes provisions for the handling of covered defense information and requires the removal of government identification from any supplies that are not accepted. Interested parties must submit responses by September 6, 2026, with William Schenck serving as the primary point of contact for this federal acquisition.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 314994
New
DIBBS
SWAGING SLEEVE, WIRE ROPE
Solicitation # SPE4A6-26-R-XD23
This solicitation, identified as SPE4A6-26-R-XD23, is issued by the Department of Defense ASC Commodities Division for the procurement of wire rope swaging sleeves under NSN 4030-00-585-2230. The opportunity is designated as a total small business set-aside and requires delivery within 74 days after the order is received. The contract mandates strict compliance with shipping and invoicing regulations. Specifically, the government may reject invoices that lack required representations if the contract exceeds the simplified acquisition threshold. Additionally, the contractor must notify the contracting officer if sea transportation becomes necessary and must adhere to regulations regarding the use of foreign-flag vessels to avoid equitable contract adjustments.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 24 days
View Details
NAICS: 314994
New
DIBBS
ROPE, FIBROUS
Solicitation # SPE8E9-26-Q-0734
This firm fixed price contract, solicitation number SPE8E9-26-Q-0734, is for the procurement of 1,158 units of international orange nylon fibrous rope, specifically designed for use with line throwing kits. Each unit consists of a spindle-mounted line with a nominal length of 550 feet, conforming to Navy drawing 1395731 and associated technical standards. Delivery is required within 198 days after the order, with shipping and destination directed to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and technical compliance, including the use of MIL-STD-1916 for sampling and the prohibition of mercury and class I ozone-depleting chemicals. Product verification testing may be invoked, requiring samples from all subcontractors. Inspection and acceptance are set at the destination, though product verification is conducted at the manufacturer's facility. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 314994
New
DIBBS
CORD, FIBROUS
Solicitation # SPE8EE-26-T-2443
This contract, identified as solicitation SPE8EE-26-T-2443, is issued by the Department of Defense DLA Troop Support Construction and Equipment for the procurement of fibrous cord. The requirement consists of 10 units of NSN 4020-99-376-9604, specifically referencing Welin Lambie Limited part numbers 5631-5802 and 800-03027. The delivery is required within 71 days after order, with an original required delivery date of August 31, 2026. The contract specifies that delivery is FOB Origin with inspection and acceptance occurring at the destination. All items must be shipped to DLA Distribution San Diego. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements RP001. The agreement incorporates various technical and quality requirements from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies and the potential application of covered defense information.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 314994
New
DIBBS
Manufacture and Supply of Webbing Straps (NSN 5340015620561)This subcontract with the Department of Defense Land Supply Chain involves the manufacture and supply of seven military-spec webbing straps under NSN 5340015620561. The scope of work encompasses the entire production lifecycle, including material sourcing, manufacturing, quality assurance, packaging, and labeling. The contract is categorized under NAICS code 314994 and requires delivery to be completed FOB-origin within five days. Performance will take place at Fort Hood, Texas, with a response deadline for the solicitation set for September 10, 2026.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 314994
New
DIBBS
CHAIN ASSEMBLY, SINGLE
Solicitation # SPE4A5-26-T-398A
This contract, identified as solicitation SPE4A5-26-T-398A, is issued by the Department of Defense ASC Supplier OEM Division for the procurement of 233 units of a single leg chain assembly, NSN 4010-01-200-1506. The requirement is associated with purchase request 7017618679 and identifies the item as a critical application item, referencing part numbers from Oshkosh Defense LLC and Columbus McKinnon Corp. Delivery is required within 133 days after the order, with an original required delivery date of November 13, 2026, and a need ship date of January 20, 2027. The items are to be delivered FOB Origin to DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to DLA packaging requirements and the DLA Master List of Technical and Quality Requirements, specifically citing RP001 and RA001. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance and sampling must be conducted according to MIL-STD-1916 or ASQ H1331, with zero non-conformance required for acceptance in certain sampling plans. Inspection and acceptance will take place at the destination.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 314994
New
SLED
146594 ROPE, COTTON ROVING, 1-INCH
Solicitation # 231682
The City of Los Angeles is seeking bids for the procurement of one-inch cotton roving rope under solicitation number 231682. This local government contract is managed by the City of Los Angeles, with performance taking place in Los Angeles, California. Interested vendors should direct inquiries to Steven Rothhammer at the Department of Water and Power. The deadline for responses is September 2, 2026, at 5:00 PM. Prospective bidders may be required to register on the official City of Los Angeles website to participate in the bidding process and should refer to the originating organization for all specific requirements and submission guidelines.
City of Los Angeles

POSTED

5 days ago

DEADLINE

in about 23 hours
View Details
NAICS: 314994
New
SLED
Entryway Floor Mat SupplyThe Missouri Department of Mental Health is seeking a subcontractor for the supply of 12 commercial-grade entryway floor mats. These mats must be 36 by 60 inches, absorbent, and non-slip, specifically designed for use in high-traffic indoor areas within healthcare facilities. This opportunity falls under NAICS code 314994 and was posted on August 28, 2026. Interested parties must submit their responses by the deadline of September 11, 2026, at 7:00 PM.
DMH MENTAL HEALTH

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 314994
New
DIBBS
LINK, CHAIN, END
Solicitation # SPE4A5-26-T-395E
This contract is for the procurement of eight units of end chain links, identified by part number NAS1049-14P and NSN 4010-01-098-3279. The order is governed by technical and quality requirements RA001, RP001, RQ011, and RQ017, with specific adherence to NAS1049 Revision 04. Delivery is required within 212 days, with a need ship date of April 5, 2027, to DLA Distribution San Joaquin in Tracy, California. Quality assurance will be managed through sampling methods compliant with MIL-STD-1916 or ASQ H1331, and packaging must follow MIL-STD-2073-1E and MIL-STD-129. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging. Item Unique Identification is not required for this order, and the material has no specified shelf life requirement.
ASC SUPPLIER OPER OEM DIVISION

POSTED

5 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335932
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA
Solicitation # SPE4A6-27-R-X001
Solicitation SPE4A6-27-R-X001 is an indefinite-quantity contract issued by the ASC Commodities Division of the Department of Defense for the procurement of special purpose electrical cable assemblies, identified by NSN 6150-015785762. This acquisition is a total small business set-aside with a total potential value of 350,000 dollars over a five-year term. The contract may result in multiple indefinite delivery purchase orders to support various CONUS stock locations and DLA depots, with a required delivery timeframe of 42 days after receipt of order. The award will be based on a best-value comparative assessment considering price, quoted delivery, and past performance, with a heavy emphasis on SPRS assessments and historical quality and delivery compliance. Technical requirements include adherence to the DLA Master List of Technical and Quality Requirements, CMMC Level 2 self-assessment, and specific packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The solicitation requires offerors to be registered in the System for Award Management and to comply with Buy American and Balance of Payments program certifications.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 24 days
View Details
NAICS: 423610
New
DIBBS
TAPE, INSULATION, ELECTRICAL
Solicitation # SPE4A6-26-R-XD27
This contract is a total small business set-aside solicitation issued by the Department of Defense ASC Commodities Division for the procurement of electrical insulation tape, identified by NSN 5970-01-263-3931. The requirement is for 1,320 rolls, with each roll measuring 36 feet in length, 1 inch in width, and 0.0200 inches in thickness, featuring a black color. The items must adhere to basic CID A-A-59163B Revision B and are classified as critical application items with a 12 month extendable shelf life. The agreement is based on firm fixed pricing with a delivery schedule of 57 days after the order is placed. Both inspection and acceptance will occur at the origin. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Quality assurance and sampling will follow MIL-STD-1916 or ASQ H1331, ensuring zero non-conformances in sample lots unless otherwise specified. This procurement is intended to result in a bilateral indefinite delivery purchase order award.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
WIRING HARNESS, BRANCHED
Solicitation # SPE4A6-26-R-XD36
Solicitation SPE4A6-26-R-XD36 is a total small business set-aside issued by the DLA Aviation ASC Commodities Division to establish a source of supply for branched wiring harnesses, identified by NSN 6150-01-572-0159. The award will be a bilateral Indefinite Delivery Purchase Order (IDPO) with a five-year base period, valid until the aggregate total of orders reaches a ceiling of 350,000 dollars. The current requirement specifies a quantity of 120 units with a required delivery of 90 days after receipt of order to various CONUS stock locations. Pricing is established as firm fixed price, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and security standards, including CMMC Level 2 self-assessment and safeguarding of covered defense information. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, while sampling plans follow MIL-STD-1916 or ASQ H1331. Evaluation for award is based on a combination of price, quoted delivery, and past performance, with SPRS assessments weighted most heavily. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program.
Current-Carrying Wiring Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
CABLE ASSEMBLY-SWITCH, ELECTRICAL
Solicitation # SPE4A6-26-R-XD31
Solicitation SPE4A6-26-R-XD31 is a total small business set-aside issued by the DLA Aviation ASC Commodities Division to establish an Indefinite Delivery Purchase Order for the procurement of electrical switch cable assemblies, identified by NSN 6150-01-191-9732. The contract is designed to provide worldwide support over a five-year base period with an aggregate total order value not to exceed 350,000 dollars. The specific requirement includes 360 units under a firm fixed price agreement, with a required delivery lead time of 120 days after receipt of order to various CONUS stock locations. The procurement is designated as a critical application item and requires adherence to ISO 9001:2015 quality standards. Technical requirements are governed by TDP Rev B Gen 2 and drawing 97403 13217E2964. Inspection and acceptance will occur at destination, with sampling conducted according to MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements. Award decisions will be based on a comparative assessment of price, quoted delivery, and past performance, with significant weight placed on SPRS assessments and historical quality and delivery compliance.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335132
New
DIBBS
FIXTURE, LIGHTING
Solicitation # SPE4A6-26-R-0288
This contract is a firm fixed price solicitation for the procurement of 196 lighting fixtures, identified by NSN 6210-01-652-7370 and part number 600A-SSL-R from L.C. Doane Company. The delivery requirement is set for 120 days after receipt of the order, with inspection and acceptance occurring at the destination and shipping handled FOB origin. This is a total small business set-aside under NAICS code 335132, managed by the Department of Defense ASC Commodities Division. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional requirements such as those found in fluorescent lights. The contractor must also comply with technical and quality requirements listed in the DLA Master List and handle covered defense information as applicable.
Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 29 days
View Details
NAICS: 339991
New
DIBBS
GROMMET, NONMETALLIC
Solicitation # SPE4A6-26-R-XD34
Contract SPE4A6-26-R-XD34 is a federal solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 793 nonmetallic grommets, identified by NSN 5325-01-607-3064 and part number SF14-1973. This is an indefinite-quantity, firm-fixed-price contract for a commercial off-the-shelf item designated as a critical application item. The procurement is a total small business set-aside with a total maximum value not to exceed 350,000 dollars over a five-year period. Key delivery and quality requirements include a delivery timeline of 106 days after contract award, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed via sampling methods according to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. The agreement incorporates various FAR and DFARS clauses, including provisions for electronic order transmission and the option for the government to extend the contract term.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-R-XC53
This solicitation, identified as SPE4A6-26-R-XC53, is issued by the Department of Defense Aviation ASC Commodities Division for the procurement of 25,537 blind rivets under NSN 5320-01-204-4780. The contract is structured as a total small business set-aside under NAICS code 332722, utilizing a firm fixed price pricing model. The requirement is designated as a critical application item, and the delivery timeline is set for 260 days after the order is placed, with both inspection and acceptance occurring at the origin. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements, specifically incorporating standards RA001, RD003, RP001, RQ001, and RQ011. The rivets must adhere to TDP Rev E Gen 5 and specific standards including NASM90353 Revision 4, NASM81177 Revision 2, and reference drawing 13873 012044780-19246. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling will follow MIL-STD-1916 or ASQ H1331. The solicitation contemplates an indefinite delivery purchase order with a five-year base period and a total maximum value not to exceed 350,000 dollars.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-R-XD33
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 1,200 electrical leads under NSN 6150-00-845-5220. The contract is a total small business set-aside with firm fixed pricing and a delivery requirement of 158 days after order. Inspection and acceptance will occur at the origin. This is a critical application item that must adhere to specific technical data packages and specifications, including MIL-DTL-83413/8F and MIL-DTL-83413C(2). The contract mandates strict adherence to Qualified Products List (QPL) and Qualified Manufacturers List (QML) requirements, meaning only components from qualified sources are acceptable. Contractors must maintain supply chain traceability documentation and follow DLA packaging requirements as specified in RP001 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots unless otherwise specified.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332996
New
DIBBS
Precision Fastener Manufacturing & SupplyThe Precision Fastener Manufacturing and Supply subcontract, issued by the Department of Defense ASC Commodities Division, requires the production and delivery of 3,942 shear bolts under NSN 5306011670472. The contractor is responsible for the entire lifecycle of the order, including manufacturing to strict military specifications, rigorous quality control, specialized packaging, and final delivery. The project falls under NAICS code 332996 and will be performed at Robins Air Force Base. Interested parties must submit their responses by September 8, 2026, following the posting date of August 31, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Supply of Hexagon Head Cap ScrewsThis subcontract involves the manufacture and supply of 210 hexagon head cap screws, identified by NSN 5305011558655, for the Department of Defense via the ASC Commodities Division. The scope of work encompasses full production and quality assurance, with a specific requirement that all packaging adheres to MIL-STD-2073-1E and delivery complies with DLA technical standards. The contract is categorized under NAICS code 332999 and specifies the place of performance in New Cumberland, Pennsylvania. Interested parties must respond by September 8, 2026, following the posting date of August 31, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 331110
New
DIBBS
Domestic Sourcing of Raw Materials and ComponentsThis subcontract, issued by the Department of Defense ASC Commodities Division, seeks the supply of domestic-origin specialty steel or bearing-grade alloys specifically for the manufacturing of Bearing Cone Trunnions. The procurement is strictly governed by the Berry Amendment and Buy American requirements to ensure the use of domestic materials. The opportunity is categorized under NAICS code 331110 and is associated with a place of performance in FPO 96692-7200. Interested parties must submit their responses by the deadline of September 8, 2026, following the posting date of August 31, 2026.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Military-Grade Packaging and PreservationThis subcontract with the Department of Defense ASC Commodities Division focuses on the preservation, packaging, and labeling of the Bearing Cone Trunnion. The work must be performed in strict accordance with MIL-STD-2073-1E and MIL-STD-129 to ensure the components are suitable for long-term storage and standard logistics handling. The project falls under NAICS code 332999 and is to be performed at the FPO location in zip code 96692-7200. Interested parties must submit their responses by September 8, 2026, following the posting date of August 31, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details