WIRING HARNESS, BRANCHE

WIRING HARNESS,BRANCHED
WIRING HARNESS,BRAN
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC DRAWING NR 01365 19012A2002 REVISION NR C DTD 07/23/2024 PART PIECE NUMBER: 19012A2002
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0192 REVISION NR C DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0193 REVISION NR C DTD 07/23/2024 PART PIECE NUMBER:
SPE4A6-27-T-041N
SECTION B
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E2066 REVISION NR C DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0076 REVISION NR C DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E2067 REVISION NR C DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0030 REVISION NR D DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0079 REVISION NR C DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0194 REVISION NR D DTD 06/10/2025 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0007 REVISION NR D DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0014 REVISION NR C DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0043 REVISION NR D DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0045 REVISION NR D DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0048 REVISION NR C DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0087 REVISION NR C DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0088 REVISION NR C DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0190 REVISION NR D DTD 07/23/2024 PART PIECE NUMBER:
SPE4A6-27-T-041N
SECTION B
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0191 REVISION NR C DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0295 REVISION NR B DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0299 REVISION NR B DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E0331 REVISION NR B DTD 07/23/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 01365 19012E2068 REVISION NR C DTD 07/23/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019014050 0001 EA 2.000
NSN/MATERIAL:6150017176264
DELIVERY (IN DAYS):0340
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE4A6-27-T-041N
SECTION B
PR: 7019014050 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:10/24/2027 Original Required Delivery Date:10/24/2027
SPE4A6-27-T-041N NSN/Part Number: 6150-01-717-6264 Quantity: 2 EA Purchase Request: 7019014050QTY: 2 Delivery: 340 days ADO