This Solicitation opportunity from Department Of Defense was posted on July 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

WIRING HARNESS

Closed

SPE4A6-26-T-10XHFederal

Submission Closed08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334418

New

SLED

Manufacturing and Supply of 93.3mm² Static/Ground/Earth WireThis subcontract involves the manufacture and supply of 217,754 units of 93.3mm² Aluminum-Steel static, ground, and earth wire for prime contractors working on California High-Speed Rail Authority projects. The fabrication of these conductors must strictly adhere to SNCF reference 0.841.6742 and IGTE 21461/200014 standards in accordance with EN 50182:2001. To ensure quality and regulatory adherence, the provider is required to perform qualification tests and issue Certificates of Compliance. A critical requirement of this agreement is full Buy America Compliance pursuant to 49 U.S.C § 22905. The performance of the contract is centered in Wasco, California. Interested parties must note the response deadline of November 19, 2026, for this procurement effort categorized under NAICS code 334418.

California High-Speed Rail Authority

POSTED

DEADLINE

Supplier of Telematics Fuel Monitoring Device Kits (Master-System-A)This subcontract, issued by Federal Prison Industries under the Department of Justice, requires the supply of 300 Telematics Fuel Monitoring Device Kits, specifically Part Number KITO759 Master-System-A. Each kit must be complete with fill rings, RFID modules, base modules, 15-foot extension cables, OBD11 cables, wake-up wires, installation hardware, and instructions. All provided equipment must comply with the Buy American, Free Trade Agreements, and Israeli Trade Act regulations. The completed kits are to be delivered to Bastrop, Texas, to support prime contractors on UNICOR Bastrop AIMS Units projects. This opportunity is designated as a total Small Business Set Aside under NAICS code 334418. The response deadline for this requirement is November 4, 2026.

Inc Federal Prison Industries

POSTED

DEADLINE

Circuit Card Assembly Repair and Modification Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Manufacturing of Special Purpose Electrical Cable AssembliesThis subcontract involves the manufacturing of high-precision, special-purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the fabrication of assemblies specifically to NSN 5995-01-693-3733 and Kongsberg P/N 60269836-02 specifications. All deliverables must adhere to Critical Application Item quality standards and DLA Master List requirements, with the final delivery consisting of completed and warranted cable assemblies. To be eligible for this contract, providers must hold approved source status or possess written authority from Kongsberg. The opportunity is categorized under NAICS code 334418 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electronics Fabrication of Frequency Module AssembliesThis subcontract, managed by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, involves the precision assembly and fabrication of frequency module assemblies. The scope of work specifically includes PCB assembly and component integration for Hamilton Sundstrand part number 690416. All deliverables must undergo rigorous testing and quality sampling in accordance with MIL-STD-1916 or ASQ H1331 standards. To ensure compliance and security, the contractor must maintain CMMC Level 2 certification and adhere to MIL-STD-129 and ASTM D3951 for packaging and marking. The final deliverables consist of completed, tested, and packaged Frequency Module Assemblies to be performed at Hill AFB. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Circuit Card Assembly (P/N 9800-96605-0002) SupplyThis subcontract, issued by the DLA Weapons Support Active Devices Division of the Department of Defense, requires the supply of five units of Circuit Card Assembly, part number 9800-96605-0002. These assemblies, identified by NSN 5998016919292, are intended for prime contractors working on DoD and MARAD projects. The selected provider must utilize appropriate circuit board fabrication and assembly equipment to manufacture or source the units. The contract mandates strict adherence to Critical Application Item quality standards and requires compliance with specific defense telecommunications equipment restrictions. Performance for this requirement is located in Tracy, California, under NAICS code 334418. Responses to this solicitation are due by November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of three special purpose electrical cable assemblies for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to produce the assemblies according to NSN 5995-01-545-7010 and Amentum P/N 127267-10, ensuring all items are marked per RQ017. Quality assurance must be maintained through sampling and inspection conducted in accordance with MIL-STD-1916 or ASQ H1331. The project is categorized under NAICS code 334418 and will be performed in New Cumberland. To be eligible, the contractor must provide a CMMC Level 2 self-assessment and maintain compliance with DFARS Buy American regulations. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Flame Retardant Tape (4 Inch 398FR)This subcontract involves the supply of 8,000 rolls of 4-inch flame retardant tape for prime contractors supporting the Department of Defense. The materials must strictly adhere to the 398FR flame retardancy specification and correspond to NSN 7018900979. The final order is to be delivered to the designated DLA destination in Cherry Point, North Carolina. Eligible providers must maintain an active SAM registration, including a valid Unique Entity ID and CAGE code. This opportunity is managed by the DLA Fleet Readiness Center DLA PSC under NAICS code 334418, with a response deadline set for November 4, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Special Cable Assembly Supplier (NSN 5995012034456)This subcontract involves the manufacture or sourcing of four special cable assemblies for the DLA Weapons Support ASC Commodities Division. All units must be produced according to the technical data package specifications for NSN 5995012034456. The contractor is responsible for ensuring that all items are marked in accordance with MIL-STD-129 and packaged and palletized following RP001 DLA Packaging Requirements. Final delivery of the assemblies is required at the DLA Distribution DDSP New Cumberland Facility. To facilitate payment, the supplier must maintain an active SAM registration for invoicing through the Wide Area Workflow system. The opportunity is categorized under NAICS code 334418, with a response deadline set for November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of CORE ASSY (NSN 5945004812806)This subcontract involves the manufacture and supply of 10 CORE ASSY electronic assemblies, identified by NSN 5945004812806 and Part Number 156722, for prime contractors supporting DLA Weapons Support Maritime Supply Chain ESOC Buys. The assemblies must be fabricated to critical application standards and strictly adhere to IPC/JEDEC J-STD-609 marking requirements. The contractor must comply with DFARS restrictions regarding covered telecommunications and the use of hexavalent chromium. Additionally, a CMMC Level 2 self-assessment is required to ensure cybersecurity compliance. The project falls under NAICS code 334418 and is managed under the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Manufacturing of Critical Cable Assembly (P/N 60202496-01)This subcontract involves the manufacture and supply of a specialized critical cable assembly, part number 60202496-01, for the DLA Weapons Support ASC Commodities Division. The fabrication must strictly adhere to Kongsberg Defence and Aerospace AS specifications, with quality assurance conducted according to MIL-STD-1916 or ASQ H1331 standards. The scope of work requires the delivery of one completed and tested cable assembly to be performed in New Cumberland. To be eligible, the contractor must maintain Buy American Act compliance and provide a CMMC Level 2 self-assessment. The opportunity was posted on October 27, 2026, with a response deadline of November 4, 2026. This project falls under NAICS code 334418 and supports prime contractors operating within the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Circuit Card Assembly (NSN 5998-01-073-6017) SupplierThis subcontract opportunity is for the manufacture or sourcing of eight Circuit Card Assemblies under NSN 5998010736017 to support prime contractors for the DLA Weapons Support ASC. The selected supplier must utilize professional PCB fabrication and electronic assembly tools to ensure all hardware meets exact technical specifications and quality standards, including compliance with FAR 52.222-50. The project is designated as a Total Small Business Set-Aside under NAICS code 334418 and is managed by the Department of Defense. Performance will take place at Hill AFB, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

in 12 days

AI Contract Overview

The contract solicits one unit of a wiring harness assembly identified by NSN 5995-01-609-2714, with a delivery requirement of 255 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The contract mandates compliance with MIL-STD-1916 or ASQ H1331 Table 1 for sampling, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated, and manufacturers may choose between attribute or variable inspection under MIL-STD-1916. The use of any Class I ozone-depleting substances in design, manufacturing, testing, or cleaning is strictly prohibited unless written approval is obtained from the contracting officer, and this prohibition overrides all referenced specifications without relaxing performance requirements. This restriction does not apply to commercial items as defined in FAR 11.001 or to part-numbered-only items. Full data packages for both the approved and alternate parts must be provided by the offeror, as no data is currently available. The solicitation, issued under SPE4A6-26-T-10XH on July 30, 2026, with a response deadline of August 7, 2026, is managed by the Department of Defense’s ASC Commodities Division, with point of contact Amanda Stewart, and performance is designated for New Cumberland, PA 17070-5002.

General Info

One wiring harness assembly delivered in 255 days, zero non-conformances, no ozone-depleting substances, full data packages required.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

RFQ SPE4A6-26-T-10XH DLA Aviation ASC Commodities Division

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 30

Solicitation

Response DeadlineAug 7

Deadline has passed

Submission Closed

08/07/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

Amanda Stewart

contact@example.gov

+1 (555) 000-0000

Full Description

WIRING HARNESS
CIRCUIT CARD ASSEMBLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
...
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
.
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5995-01-609-2714 Quantity: 1 EA Purchase Request: 7017696089QTY: 1 Delivery: 255 days ADO